d19dae6e2d
ar71xx: add profile and build image for the Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36790
2013-05-30 16:23:10 +00:00
35b5b38316
ar71xx: add user-space support for TP-LINK Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36789
2013-05-30 16:23:09 +00:00
91d7c3efc1
ar71xx: add kernel support for the TP-LINK Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36788
2013-05-30 16:23:07 +00:00
f02765086d
ar71xx: add USB workarounds for AR934x/QCA955x SoCs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36787
2013-05-30 16:23:06 +00:00
6ff976a87a
ar71xx: add profile and build image for the DIR-601-B1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36786
2013-05-30 16:19:30 +00:00
424c4c0b0a
ar71xx: allow to build CameoHornet images for multiple regions
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36785
2013-05-30 16:19:29 +00:00
184dd34b6d
ar71xx: allow to override fw version in CameoHornet profile
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36784
2013-05-30 16:19:28 +00:00
e60cb01c45
lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
...
The GPIO buttons of ARV752DPW are active low.
Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.
This fixes: https://dev.openwrt.org/ticket/12642
Signed-off-by: Rafael Gieschke <rafael@gieschke.de>
SVN-Revision: 36783
2013-05-30 16:01:06 +00:00
c2b1e9eeef
lantiq: Fix ar8216 switch configuration
...
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36782
2013-05-30 16:00:59 +00:00
090a75447b
lantiq: DGN3500 support
...
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36781
2013-05-30 16:00:50 +00:00
a9968d9cb8
lantiq: enable retrieving kernel args from bootloader
...
This patch is a device tree enhancement that IMHO is worthy of mainline.
It allows the bootloader's commandline to be preserved even when the
device tree specifies one.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36780
2013-05-30 16:00:42 +00:00
d1f3751d05
lantiq: wifi calibration from MTD
...
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36779
2013-05-30 16:00:32 +00:00
83c3cd4ed9
lantiq: postpone PCI and wifi init
...
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36778
2013-05-30 16:00:24 +00:00
b585923cc9
lantiq: fix LED-handling oversights
...
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36777
2013-05-30 16:00:15 +00:00
1756047518
ramips: set correct description for rt305x subtarget
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36775
2013-05-30 15:59:56 +00:00
4b21af4268
imx6: add new target
...
SVN-Revision: 36753
2013-05-29 01:27:29 +00:00
846e3d40a0
kernel: generic: remove upstream patches for 3.10-rc3 and refresh patches
...
SVN-Revision: 36752
2013-05-29 01:27:27 +00:00
c4d0a49348
ar71xx: typo in detect TL-MR10U/TL-MR11U
...
At offset 0x40, signature for TL-MR10U/TL-MR11U begin
from 0x00, not 0x10/0x11.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36727
2013-05-26 16:38:00 +00:00
cc7bedf8a3
ar71xx: fix TL-MR10U usb power
...
MR10U is closer to MR3040 than WR703N. This changes also
enable USB power on GPIO18.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36726
2013-05-26 16:37:59 +00:00
7d2182c455
kernel: update linux 3.9 to 3.9.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36725
2013-05-26 16:02:34 +00:00
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
93ce462b7e
ar71xx: set eth0 mac address to match bottom label of the OM2P LC
...
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36723
2013-05-26 16:02:29 +00:00
0842478e44
ar71xx: add TP-LINK TL-MR10U
...
Small router with 4MB flash, 32MB RAM
http://www.tp-link.com.cn/product_300.html
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36722
2013-05-26 16:02:26 +00:00
0998065a53
generic: ar8216: add port mirroring
...
Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both
RX and TX traffic from LAN port 1 to LAN port 4:
$ swconfig dev switch0 set enable_mirror_rx 1
$ swconfig dev switch0 set enable_mirror_tx 1
$ swconfig dev switch0 set mirror_monitor_port 4
$ swconfig dev switch0 set mirror_source_port 1
Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Tested-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36713
2013-05-24 13:10:22 +00:00
fe7e52e4a4
ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36679
2013-05-21 09:45:46 +00:00
a01be4a217
kernel: update 3.9 to 3.9.3
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36676
2013-05-20 16:57:00 +00:00
3ac261cd21
ar7: drop obsolete 3.3 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36674
2013-05-20 12:42:44 +00:00
334e6d4e0c
ar7: drop obsolete 3.6 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36673
2013-05-20 12:42:41 +00:00
49c81c6e00
ar7: switch to 3.9
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36672
2013-05-20 12:42:38 +00:00
c4b943c82c
ar7: add support for 3.9
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36671
2013-05-20 12:42:36 +00:00
4d0fcd0c49
kernel: add some missing symbols/move them to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36670
2013-05-20 12:42:32 +00:00
b751b5893c
brcm2708: make it boot on revision 2 raspberry pis
...
* update the bootcode.bin to the newest version
- gpu/cpu mem split is now configured through config.txt, so no need
to create more than one sd card image (just edit the config.txt)
- bootcode.bin now supports the never revision 2 raspberry pis
* add a commented prepopulated config.txt for easier config changes
Taken from <https://github.com/Evilpaul/RPi-config >
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36668
2013-05-20 12:07:03 +00:00
c0435a971e
kernel: generic: add 3.10-rc1 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36663
2013-05-19 18:36:15 +00:00
0a62b7c148
bcm63xx: add 3.9 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36660
2013-05-19 18:32:13 +00:00
1f4e5f77a0
bcm63xx: Simplify CFE detection.
...
Check bootloader argument in mtd.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: split into two patches, one for detection,
one letting bcm63xxpart use it.]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36659
2013-05-19 18:32:02 +00:00
6e2b85b401
kernel: update 3.9 to 3.9.2
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36658
2013-05-19 18:31:51 +00:00
668604f91d
kernel: don't remove of_tables
...
These are needed for OF setup of clocksource, clocks and irqchips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36657
2013-05-19 11:27:28 +00:00
56478636aa
ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36646
2013-05-17 07:31:00 +00:00
144cfb65a4
ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36631
2013-05-13 19:13:33 +00:00
2c5a5d8736
kernel: add missing PHY ID for an AR8327 switch variant
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36630
2013-05-13 19:13:27 +00:00
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
ed06d2ad5c
bcm63xx: don't build CRAMFS
...
Don't build the CRAMFS file system module in the kernel, and save some bytes.
No bcm63xx board needs this obsolete file system, neither those ones using
the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has
been replaced long time ago by squashfs.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36616
2013-05-12 21:41:52 +00:00
ccd7fbba87
led and buttons support for board DWV-S0
...
Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it>
[jogo@openwrt.org: fixup patch so it actually applies]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36615
2013-05-12 21:41:50 +00:00
0a907fdb8a
bcm63xx: remove defconfig support
...
All boards use uci-defaults, no need to keep defconfig support.
SVN-Revision: 36610
2013-05-12 11:54:38 +00:00
bbd02c6fb7
kernel: fix CVE-2013-1763 in older kernels
...
Newer kernels were already fixed by upstream.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36607
2013-05-12 10:55:12 +00:00
0be8dd36dc
ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36600
2013-05-09 23:32:46 +00:00
0b03ff2028
kernel: make zlib and lzo modules selectable
...
Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36592
2013-05-09 20:50:07 +00:00
0b161c6f9e
kernel: b53: use correct oops for bcm5365 switch
...
SVN-Revision: 36589
2013-05-09 20:01:58 +00:00
98f6dc1b43
kernel: allow building zsmalloc as a module again
...
zsmalloc was changed to a bool because of missing exports in the kernel,
but we already export the required symbol, so change it back to tristate.
Closes #13481 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36587
2013-05-09 19:19:36 +00:00
cb3d71ca8e
ar71xx: use combined kernel image in the CameoHornet template
...
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36584
2013-05-08 17:11:10 +00:00
f938a798f8
ar71xx: add profile and build image for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36582
2013-05-08 17:07:19 +00:00
852b8e9490
ar71xx: add user-space model detection for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36581
2013-05-08 17:07:18 +00:00
c70694e755
ar71xx: add profile and build image for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36580
2013-05-08 17:03:43 +00:00
33a2cbfd5c
ar71xx: add user-space support for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36579
2013-05-08 17:03:42 +00:00
10b3ca5ccb
ar71xx: add kernel support for Netgear WNDAP360
...
Here is corrected version (only thing not working are wifi LEDs).
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36578
2013-05-08 17:03:34 +00:00
39467e78e7
kernel: update linux 3.9 to 3.9.1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36577
2013-05-08 08:53:55 +00:00
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
d09ba5ef10
ar71xx: Fix AP135 partition layout
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36575
2013-05-08 08:53:49 +00:00
eb10f052ce
lantiq: enable portmaps again and set max port to 2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36573
2013-05-07 10:58:52 +00:00
036fb79052
ramips: drop 3.7 support
...
Signed-off-by; John Crispin <blogic@openwrt.org>
SVN-Revision: 36572
2013-05-07 10:58:44 +00:00
16a17b318a
ramips: properly setup the FEATURES variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36571
2013-05-07 10:58:30 +00:00
bd6e12d904
ramips: fix memory detection rt5350
...
Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 36568
2013-05-06 18:23:56 +00:00
899120ddef
ramips: enable dsp extensions for rt305x and rt3883
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36567
2013-05-06 16:45:59 +00:00
849ff98669
ramips: fix fypo in ethernet driver rt288x, rt3883
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36565
2013-05-06 16:45:43 +00:00
eddd7f5773
ramips: Update ARC Freestation profile
...
These devices are actually built around the 8devices Carambola dev board.
ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History
Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.
- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
actually reports itself as being an RT3350 while still having
RT3050F markings.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36564
2013-05-06 16:45:35 +00:00
4f1ff28f08
ramips: Support setting active_low in devicetree gpio-export
...
Support setting active_low in devicetree gpio-export.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36563
2013-05-06 16:45:27 +00:00
6af3b6721b
ralink: unbreak uart pinmux handling
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36562
2013-05-06 16:45:20 +00:00
7c04b3bd66
ramips: fix gpio base numbering
...
make banks 0 based to unbreak userland ABI
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36561
2013-05-06 16:45:12 +00:00
338ff04cab
ramips: add gpio base properties to dtsi files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36560
2013-05-06 16:45:04 +00:00
65760ede8b
ramips: unbreak rt2880 support
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
SVN-Revision: 36559
2013-05-06 16:44:56 +00:00
28bdb9efe9
ramips: fix DIR-602D1 flash size
...
Fix DIR-620D1 flash size.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36558
2013-05-06 16:44:47 +00:00
1c89a60431
ramips: unbreak gpio handling for uart mux group
...
this should fix the handling of corner cases
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36543
2013-05-04 11:36:51 +00:00
bb429757c8
at91: build .dtb file for the CalAmp LMU500 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36542
2013-05-03 19:01:00 +00:00
ccf95fe938
ar71xx: Fix AP135 PCI
...
AP135 has a pluggable PCIE slot unlike AP136.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36541
2013-05-03 19:00:58 +00:00
18c588a570
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530
2013-05-03 09:12:19 +00:00
30c4360345
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36529
2013-05-02 15:59:57 +00:00
24636fcabf
bcm63xx: split into two subtargets, generic and SMP
...
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527
2013-05-02 15:28:31 +00:00
d11efa1428
bcm63xx: add SMP support for BCM6362 and BCM6368
...
BCM6358 requires further work due to its shared TLB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526
2013-05-02 15:28:26 +00:00
8f15326acc
kernel: generic: don't strip /proc/irq on SMP
...
/proc/irq is needed for changing the SMP affinity of interrupts.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36525
2013-05-02 15:28:12 +00:00
a80a4f3ec2
bcm63xx: fix hsspi flash registration for BCM6362
...
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524
2013-05-02 15:28:10 +00:00
999a956f4c
bcm63xx: fix/enable livebox minipci
...
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523
2013-05-02 15:28:07 +00:00
6ac2b3b76a
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.
...
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/ .
SVN-Revision: 36513
2013-05-02 11:46:53 +00:00
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
db02b0e4ee
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
...
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36506
2013-05-01 21:52:25 +00:00
292368409e
brcm63xx: add missing binary operands to BCM6345 ethernet patch
...
Thanks to Emilio Arias for reporting it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36505
2013-05-01 21:12:40 +00:00
6f48ccea02
brcm63xx: remove 3.7 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36504
2013-05-01 21:12:26 +00:00
0ae43dbe9d
ar71xx: rename WNR2000v3 support patch
...
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498
2013-04-30 10:44:11 +00:00
d557a51a40
x86/geos: switch to 3.8.10
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36496
2013-04-30 10:44:09 +00:00
0fa71ca3e5
linux/3.9: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36495
2013-04-30 10:44:08 +00:00
41445b41cc
linux/3.8: use backported pcibios_get_phb_of_node patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36494
2013-04-30 10:44:07 +00:00
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
8e466dcdf4
at91: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36492
2013-04-30 10:43:58 +00:00
d35545f3d7
linux/3.{8,9}: add missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36491
2013-04-30 10:43:57 +00:00
25c45c0d53
linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
...
It is forced to 'y' since r36342.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36490
2013-04-30 10:43:56 +00:00
eff12a630d
ramips: move dlink profile to correct sub folder - 2nd try
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36489
2013-04-30 10:34:20 +00:00
1db4587bc7
ramips: move dlink profile to correct sub folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36487
2013-04-30 08:24:26 +00:00
ca7f9638d5
broadcom-diag: support for the WNDR3700v3
...
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.
The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 36482
2013-04-28 21:11:17 +00:00
7dee0dae35
brcm47xx: use kernel 3.8.10 as default kernel
...
The biggest change with this kernel is a new partition parser.
SVN-Revision: 36480
2013-04-28 18:25:16 +00:00
00a7ace7cf
brcm47xx: add board detection for NETGEAR WNDR4500 V2
...
SVN-Revision: 36478
2013-04-28 18:19:31 +00:00
e7e4afbb64
kernel: fix a memory leak in split_rootfs_data()
...
allocate_partition() copies all the content of dpart into a new struct.
SVN-Revision: 36475
2013-04-28 17:01:56 +00:00
1bac172c44
kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.
...
SVN-Revision: 36473
2013-04-28 16:52:11 +00:00
ad1d3f00cb
kernel: update linux 3.9 patches to rc8
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36469
2013-04-28 11:55:23 +00:00
a33dd13c98
kernel: add missing bcma defines and header file for bcrmfmac
...
Fixes build failure when having kmod-mmc and brcmfmac selected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36468
2013-04-28 11:10:42 +00:00
7c2632fbc5
ar71xx: add user-space support for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36461
2013-04-26 17:00:54 +00:00
b29b7b65ea
ar71xx: add profile and build image for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36460
2013-04-26 17:00:53 +00:00
9b3c0d11a2
ar71xx: Add Netgear WNR2000v3 support
...
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36459
2013-04-26 17:00:52 +00:00
183e2af1c7
ar71xx: add profile and build image for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36458
2013-04-26 17:00:50 +00:00
7c4e2c1f72
ar71xx: add user-space support for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36457
2013-04-26 17:00:49 +00:00
5c11773f8a
ar71xx: add kernel support for TPLINK WR720N v3
...
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.
The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.
Tested on my device and they worked fine.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36456
2013-04-26 17:00:48 +00:00
c0691e29f1
mpc85xx: Add subtargets Generic and P1020
...
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36454
2013-04-26 16:57:43 +00:00
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
988ae9cbf8
at91: upgrade to kernel 3.8.7 and use devicetree
...
This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36452
2013-04-26 16:55:40 +00:00
c63bb1a18e
ramips: rt3883: fix build error
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36451
2013-04-26 16:55:28 +00:00
b42a173664
lantiq: make leds and network work on VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
520bf46375
lantiq: fix board detection helpers
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36444
2013-04-25 19:03:37 +00:00
157c86371f
lantiq: move dts files to thir own folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
4664e21293
generic: fix rtl8366_smi compile warning
...
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36442
2013-04-25 19:03:29 +00:00
9ae3adbe3c
lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36441
2013-04-25 19:03:25 +00:00
d3d18ae812
lantiq: make lzma-loader based images for VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36440
2013-04-25 19:03:21 +00:00
a46acc80e4
lantiq: update VG3503J.dts to match new partition layout
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36439
2013-04-25 19:03:17 +00:00
46306c2e47
lantiq: add lzma-loader source
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36438
2013-04-25 19:03:13 +00:00
e141b73f9d
ramips: remove now unneeded user-space board detection
...
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36436
2013-04-25 19:03:05 +00:00
cf3885eb0f
ramips: introduce DTS for ALL5003
...
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36435
2013-04-25 19:03:01 +00:00
978567a89e
ramips: set preinit interface to eth0 by default.
...
This makes any ramips device accessible via ethernet in failsafe mode.
Based on: https://dev.openwrt.org/changeset/36322
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36434
2013-04-25 19:02:57 +00:00
7bfab6e308
ramips: Add Alpha ASL-26555 support.
...
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.
There are two versions (Chile 8MB and Spain 16MB).
Wiki: http://wiki.openwrt.org/toh/alpha/asl26555
Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36433
2013-04-25 19:02:53 +00:00
c7216d0cab
ramips: Add support of D-link DIR-620D1
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36432
2013-04-25 19:02:48 +00:00
deb3635923
ramips: sync kernel patches with the mips-next tree
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36431
2013-04-25 19:02:42 +00:00
831c7ea04f
preinit: move cmdline failsafe= handling ot the generic code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36430
2013-04-25 19:02:37 +00:00
90986b5581
bcm63xx: update patches with upstream submissions
...
SVN-Revision: 36407
2013-04-23 13:55:36 +00:00
2a1a16d2d5
bcm63xx: switch to linux 3.8
...
SVN-Revision: 36406
2013-04-23 13:55:17 +00:00
4e8f7f37ed
Change default IPv6 config to enable DHCPv6-PD
...
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
a8a01b42ae
kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL
...
SVN-Revision: 36378
2013-04-22 15:01:36 +00:00
cd35ea2174
ar71xx: merge more unaligned access hacks from cerowrt-next
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36374
2013-04-22 12:53:21 +00:00
f58dcb59c6
kernel: backport SSB/BCMA changes in preparation for a compat-wireless update
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36367
2013-04-19 12:39:40 +00:00
f03960723a
linux/3.9: add missing config symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36365
2013-04-19 08:07:38 +00:00
e07848664c
linux/3.[89]: update bridge_remove_ipv6_dependency patch
...
Fixes the following warning:
CC [M] net/ipv6/addrconf.o
net/ipv6/addrconf.c: In function 'addrconf_init':
net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36364
2013-04-19 08:07:37 +00:00
151cadfe32
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
96bb7c123b
build: consistently use 'depends on' instead of 'depends'
...
make the syntax more compatible with kernel menuconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36351
2013-04-17 15:36:41 +00:00
e3003ea2a9
fix prepare_generic_squashfs
...
prepare_generic_squashfs was called twice on the generated images breaking mount_root
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36349
2013-04-17 11:54:09 +00:00
8001e6a689
fix rt305x gpio
...
https://dev.openwrt.org/ticket/13359
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36343
2013-04-16 06:58:18 +00:00
a662200205
kernel: force CONFIG_NET_SCHED=y for fq_codel ( #13360 )
...
SVN-Revision: 36342
2013-04-15 20:40:29 +00:00
57b68daee9
refresh against -rc7
...
SVN-Revision: 36340
2013-04-15 16:10:01 +00:00
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
68c54dc34f
mpc85xx: use static SPI bus number for TL-WDR4900
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36329
2013-04-12 19:44:41 +00:00
54635e7f78
linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36328
2013-04-12 19:44:38 +00:00
d3a46c4b7f
update rt2880 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36327
2013-04-12 18:57:01 +00:00
92259c4803
fix up the rt2880 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36326
2013-04-12 18:56:53 +00:00
a6424245e6
fix RT-N15 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36325
2013-04-12 18:56:44 +00:00
7af1fa46ad
update rt2880.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36324
2013-04-12 18:56:36 +00:00
10f432ba9d
fix rtl8366s OF binding
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36323
2013-04-12 18:56:05 +00:00
687b3f04ce
mpc85xx: set preinit interface to eth0 by default
...
This makes the WDR4900 accessible via ethernet in
failsafe mode.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36322
2013-04-12 18:30:25 +00:00
40e15b1fbf
mpc85xx: Generate fdt for P1020RDB
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36321
2013-04-12 18:30:24 +00:00
f43bdf34cd
mpc85xx: Add P1020RDB board support
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36320
2013-04-12 18:30:22 +00:00
d5f87e193c
add VG3503J support
...
this adds basic support. the bootloader on these units is locked down.
until we have a replacement we can do basic testing with these env variables in uboot.
set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000
unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.
please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
fbc1e3732b
add FE phy firmware
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36314
2013-04-11 19:17:48 +00:00
0d32469457
add missing pinmux patch
...
Fix lantiq pinmux which affected PCI and USB.
Known affected boards are: ARV4518 and ARV7518.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36312
2013-04-11 07:12:37 +00:00
6436b3f736
cns3xxx: fix USB ehci/ohci platform driver
...
Update ehci/ohci driver registration to conform to the new platform
drivers.
This fixes missing USB host support in 3.8.x
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 36309
2013-04-10 16:20:50 +00:00
edd8048107
kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base
...
Fixes booting on single-core CNS3xxx devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36308
2013-04-10 16:07:50 +00:00
06733c2650
kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36307
2013-04-10 13:45:12 +00:00
7fa2957103
kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36304
2013-04-10 13:11:29 +00:00
df3d4690bd
kernel: keep dropped stats in fq_codel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36303
2013-04-10 13:11:25 +00:00
ec3a8846fc
kernel: tune fq_codel defaults for common netdevice speeds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36302
2013-04-10 13:11:21 +00:00
307965026a
kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36301
2013-04-10 13:11:16 +00:00
915969ff2c
kernel: refresh patches against 3.9-rc6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36297
2013-04-09 16:16:20 +00:00
c3366cd164
kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c
...
Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones.
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36296
2013-04-09 16:16:16 +00:00
518d6a9273
kernel: backport switch user API changes after r36283
...
3.3 and 3.6 kernels do not make use of the UAPI headers, still they need
to provide an up-to-date switch.h copy for swconfig to build.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36295
2013-04-09 15:47:01 +00:00
fb47fd0d6b
unbreak portmapping - typo fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36293
2013-04-09 14:39:01 +00:00
bc7b310959
move memory detect node to dtsi files
...
Signed-of-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36290
2013-04-09 14:19:36 +00:00
48feea4861
Add Netgear WNCE2001 (OF version)
...
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
e468abcae0
remove bootargs from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
82c3b7ce26
add ofpart info to the devicetrees
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
f1e9d30ffc
add sample swconfig portmap
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
fcd962cc71
set of_node before registring the switch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36285
2013-04-09 14:19:17 +00:00
fff58a5801
allow loading port maps from OF
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36283
2013-04-09 14:19:09 +00:00
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
130f67210a
ramips: TEW-691GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
a4a148f222
ramips: rt3883: enable the AR8216 driver
...
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36275
2013-04-08 12:34:15 +00:00
a9d977b2af
ramips: add profile for the Omnima EMB-HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36274
2013-04-08 11:12:04 +00:00
82705b30b3
ramips: OMNI-EMB-HPM.dts fixes
...
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
909fabe574
ramips: add mdio-bus node to rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
78ee80f2e8
ramips: fix MDIO/PHY handling
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36271
2013-04-08 11:12:01 +00:00
30e5bae84a
ramips: fix console speed for OMNI-EMB-HPM
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
cd7ce5226d
ramips: avoid invalid pointer dereference in pinmux code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36269
2013-04-08 08:24:50 +00:00
4c85227cf4
ramips: TEW-692GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
97635d7a8e
ramips: add PCI node into RTN56U.dts
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36264
2013-04-07 20:56:22 +00:00
474264f64c
ramips: add PCI node for rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36263
2013-04-07 20:56:21 +00:00
6c8951313c
ramips: rt3883: enable PCI support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36262
2013-04-07 20:56:20 +00:00
b6b0a8fbee
ramips: fix RT3883 PCI driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36261
2013-04-07 20:56:18 +00:00
1700bf5b2e
ramips: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36260
2013-04-07 17:05:05 +00:00
6de8743e44
ramips: add missing cpu-feature-override.h files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36259
2013-04-07 17:05:04 +00:00
68875710fd
ramips: fix broken patch name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36258
2013-04-07 16:26:27 +00:00
16d0ce52b0
ramips: fix polarity of GPIO buttons for RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36257
2013-04-07 16:24:33 +00:00
9e6ae6ab5d
x86/generic: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36256
2013-04-07 15:53:17 +00:00
0d0bfe3d41
x86/generic: switch to 3.8
...
Only tested within a VM.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36255
2013-04-07 15:53:15 +00:00
f5d28ea3ce
x86/generic: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36254
2013-04-07 15:53:13 +00:00
71a51e3b91
x86/alix2: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36253
2013-04-07 15:53:11 +00:00
15d311ec18
x86/alix2: switch to 3.8
...
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36252
2013-04-07 15:53:09 +00:00
9d05b1b683
x86/alix2: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36251
2013-04-07 15:53:08 +00:00
89f690843f
x86: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36250
2013-04-07 15:53:05 +00:00
d1f28c6d1f
ramips: add nor-flash node for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
0c3c29ca38
ramips: fix pinmux settings for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
66fbe78a93
ramips: pinmux fixes
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
aedf05caa0
ramips: remove trailing whitespaces from dts files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
017aabe292
ramips: handle PCI interrupts in plat_irq_dispatch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
811f7f9f2d
fix typos inside dts files
...
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
709b19ed9f
fix default commandline in dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
85675528da
ramips: add cfi_cmdset_0002 patches
...
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
fde143b66f
cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36241
2013-04-07 11:24:30 +00:00
10d8e4b66c
ramips: remove top-level {address,size}-cells properties from .dts files
...
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
4a46687d25
brcm47xx: use old partition names again for kernel 3.8
...
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
SVN-Revision: 36235
2013-04-06 22:22:26 +00:00
204bde8d98
brcm47xx: fix error in board detection when nvram is not available.
...
SVN-Revision: 36234
2013-04-06 19:02:25 +00:00
d45ef216e6
linux/3.8: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36233
2013-04-06 17:33:03 +00:00
51fa28e2c2
linux/3.8: backport devm_ioremap_resource from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36232
2013-04-06 17:33:00 +00:00
756b810178
ramips: fix ethernet switch node in DIR-645.dts
...
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
747b795b56
generic: rtl8367: add compatible string with vendor prefix
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36230
2013-04-06 17:19:31 +00:00
f5d8d80ca9
generic: rtl8367b: fix rtl8367b_extif_init_of
...
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36229
2013-04-06 17:03:09 +00:00
32d3b456f0
linux/3.8: add more missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36228
2013-04-06 16:56:47 +00:00
89539462a8
linux/3.8: add missing symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36226
2013-04-06 16:38:36 +00:00
1ef39b43dd
ramips: remove spi node from RTN56.dts
...
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
d57e662cda
ramips: fix ethernet switch node in RTN56U.dts
...
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
4becd8590c
ramips: rt3883: enable the RTL8367 driver
...
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
38bd9b4337
generic: rtl8367: allow to load extif config from OF
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36220
2013-04-06 12:37:36 +00:00
585d19d168
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36219
2013-04-06 12:37:34 +00:00
68c931c637
generic: rtl8367: add vendor prefix to the compatible string
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36218
2013-04-06 12:37:32 +00:00
348640f4b3
ramips: rt3883: sync 3.8 config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
d16de0b69f
fix typo pinmmux -> pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
202fb45deb
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36214
2013-04-06 11:40:41 +00:00
df7af06f1f
fix dir-615 h1 network config
...
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
e1a74d8ff7
fix typo that made gpiomuxing fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
495296bba9
malta: add le64 and be64 sub targets
...
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36211
2013-04-05 12:36:48 +00:00
12b925dcbf
malta: move 32-bits options to subtarget config
...
Preliminary change to add support for MIPS64-based malta subtargets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36210
2013-04-05 12:36:45 +00:00
5eb8ba7f19
malta: move endianness kernel configuration to subtarget
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36209
2013-04-05 12:36:41 +00:00
46dfa04a08
malta: enable mips16 feature flag
...
The malta platform supports mips16 advertise this feature flag.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36203
2013-04-05 12:36:16 +00:00
d9bb7ff7a5
Migrate lantiq platform to common led helper functions
...
http://patchwork.openwrt.org/patch/3316/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
a4c745ee74
add a missing patch that makes board detection work again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
c838ec2391
Patch for invoking (pre)init
...
http://patchwork.openwrt.org/patch/3485/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 36183
2013-04-03 10:00:50 +00:00
93899a1329
add profile for tenda w150m board
...
http://patchwork.openwrt.org/patch/3371/
Signed-off-by: Chi Zhang <zhangchi866@gmail.com>
SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
7e54357bd5
fix ALL5002 default package selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36175
2013-04-03 10:00:16 +00:00
37401dca92
Build WW factory image for DAP-1350
...
http://patchwork.openwrt.org/patch/3466/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36174
2013-04-03 10:00:12 +00:00
910b705155
add Huawei D105
...
http://patchwork.openwrt.org/patch/3510/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
c1710901c5
add profile for the Edimax 3g-6200NL board
...
http://patchwork.openwrt.org/patch/3214/
Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>
SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
f3643374c4
there is no ttyS1 console
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36171
2013-04-03 09:59:59 +00:00
99e0ff1123
make v3.8 the default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36170
2013-04-03 09:59:55 +00:00
c8d5f5e0ef
add new image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36169
2013-04-03 09:59:51 +00:00
770b28f146
add the dts files that describe the boards in future
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36168
2013-04-03 09:59:46 +00:00
2328e8389e
fix upvel profile names
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36167
2013-04-03 09:59:41 +00:00
94972a5268
fix rt3883 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36166
2013-04-03 09:59:37 +00:00
0716ae8abe
fix rt305x config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36165
2013-04-03 09:59:33 +00:00
dce4945972
mark rt288x broken until the test hardware arrives in the mail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36164
2013-04-03 09:59:16 +00:00
Gabor Juhos
John Crispin
Luka Perkov
Felix Fietkau
Jonas Gorski
Hauke Mehrtens
Jo-Philipp Wich
Florian Fainelli
Steven Barth
Imre Kaloz