Commit Graph

1104 Commits (c9e2c35f46346fc460a78b8f13b70d538c47cb27)

Author SHA1 Message Date
Paul Wassi 9d4f8ff4f6 brcm63xx: add support for Pirelli/ADB P.DG AV4202N
This patch adds support for the ADB P.DG AV4202N aka Pirelli PRG AV4202N.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski 31d5c5bc90 brcm63xx: setup internal switch leds for bcm6368
Setup the GPIO_MODE register bits for used internal switch port leds.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski c7f31b280f brcm63xx: do a full reset phy cycle
Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski dd7079e79a brcm63xx: implement gpio_to_irq for bcm63xx-gpio
Add support for mapping some GPIO lines to IRQs. GPIO to IRQ mappings
were found out through experimentation, helped by having the GPIO as
output still toggling the IRQ input.

Based-on: http://patchwork.ozlabs.org/patch/660534/
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:43 +01:00
Jonas Gorski 94bbd1f057 brcm63xx: fix external interrupts on BCM6318
Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:43 +01:00
Jo-Philipp Wich 770ac77cce brcm63xx: board.d: request untagged switch config where applicable
In order to prepare support for generating tagged switch configurations by
default, explicitely request untagged configs for boards which do not already
request tagging to retain default behaviour.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Felix Fietkau 1708644f19 kernel: backport MIPS changes introducing a separate IRQ stack
Prevents crashes when IRQs arrive when the current kernel stack context
already contains deeply nested function calls, e.g. when stacking lots
of network devices on top of each other

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-15 18:25:54 +01:00
Victor Shyba d6c831e0e5 generic: mtd: backport SPI_NOR_HAS_LOCK
This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.

Signed-off-by: Victor Shyba <victor1984@riseup.net>
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-03 19:58:00 +01:00
Jo-Philipp Wich fc6ed9521d brcm63xx: image: trim revision code used for --rsa-signature
The imagetag RSA signature field may not exceed 20 characters, so trim the
Git hash portion from the REVISION variable in order to ensure that the
resulting string fits within this field.

The current revision values may be longer than 20 chars, especially when
building within a dirty tree. In this case, the revision will look like
"r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long.

Fixes the following error spotted by the buildbots:

    Error: RSA Signature (rsa_signature,r) too long.
    make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:39:14 +01:00
Daniel Gonzalez Cabanelas d2b79e4d80 brcm63xx: Livebox 1: add userspace board support
Fix configuration files for the Livebox 1 routers.
- Add status led
- Set eth0 as the LAN port, for coherence with RedBoot and comfortability.
- Add led triggers

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-11-21 18:40:15 +01:00
Daniel Gonzalez Cabanelas aedca3ce43 brcm63xx: Livebox 1: relocate the kernel to fix boot
Fix Image generation for the Livebox 1
- missing "relocate-kernel", wrong "LOADADDR", fix it

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-11-21 18:40:15 +01:00
Daniel Gonzalez Cabanelas 422ba32c71 brcm63xx: Livebox 1: fix part probe name
Fix the DTS file for the Livebox 1 routers:
- part probe wrong, it should be RedBoot (uppercase matters)

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-11-21 18:40:15 +01:00
Daniel Gonzalez Cabanelas 768595c9f1 brcm63xx: Livebox 1: fix led naming
Fix the DTS file for the Livebox 1 routers:
- leds are totally wrong, fix them.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-11-21 18:40:15 +01:00
Daniel Gonzalez Cabanelas 727ebf3a70 brcm63xx: Livebox 1: use button 1 as failsafe button
Fix the DTS file for the Livebox 1 routers:
- no failsafe button, use button 1 for this purpose

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-11-21 18:40:15 +01:00
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00
Mathias Kresin de40d45363 treewide: dts: fix dtc compiler warnings
Fixes invalid device tree parameters.

Drop the mvsw61xx node used in mvebu device tree source files. It looks
like some kind of ethernet switch cargo cult. Neither the
marvell,88e6352 nor the marvell,88e6172 compatible strings can be found
in any LEDE file or in the kernel sources.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-12 21:04:15 +01:00
Stijn Segers 2f2ea7b44c kernel: update kernel 4.4 to version 4.4.30
This patch bumps the 4.4 kernel from .28 to .30 and refreshes the patches.
Compile-tested on ar71xx, x86/64, ramips/mt7621, brcm47xx and kirkwood.

Run-tested on ar71xx & ramips/mt7621, brcm47xx and kirkwood (last two confirmed
by P. Wassi).

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2016-11-02 10:25:44 +01:00
Rafał Miłecki 0658527e1e switch to the new usbport LED trigger
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Álvaro Fernández Rojas d14c28fc80 kernel: update kernel 4.4 to version 4.4.20
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 08:10:55 +02:00
Daniel Gimpelevich 993ad29359 kernel: Backport pending appended DTB handling patches
Backport patches from upstream Linux kernel which are making the
kernel stores the appended dtb not in the same resisters as defined in
the UHI specification, use a separate variable on MIPS.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
[some modifications]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-09-12 22:36:55 +02:00
Mathias Kresin 85fefcdb61 kernel: mtd: backport Macronix sector size fix
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 09:27:09 +02:00
Felix Fietkau aa53f78038 build: fix subtarget descriptions
Move Target/Description above the target.mk include

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-04 13:35:11 +02:00
Jonas Gorski cf8da98e94 brcm63xx: switch to board based failsafe networking
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:50:23 +02:00
Jonas Gorski 0ddae04c22 brcm63xx: backport mtd of node changes from upstream
Should fix parser data containing uninitialized values for of probed
physmap flashes, which could break e.g. the redboot parser.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:35 +02:00
Daniel Gonzalez 4ab33a3002 brcm63xx: fix CT-536p/CT-5621T support
Fix support for the Comtrend  CT-536+, CT-5361 and CT-5621T routers support.

Currently the firmware is broken for these routers, because there is a missing
bar in the code at the DTS file avoiding to match with DTS stuff at the kernel. This
causes the router boots without ethernet connectivity. The status led also has a typo.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-01 10:12:15 +02:00
Felix Fietkau df68d6eb15 brcm63xx: fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 13:17:51 +02:00
Felix Fietkau 63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
dani cea917c30b brcm63xx: fix HG556a C button
One button of the HG556a-C has the wrong GPIO pin defined in the dts file,
fix it

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
2016-07-24 06:38:30 +02:00
Felix Fietkau 8e2764ce9b image.mk: clean up redundant code related to DEVICE_DTS
It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:14:11 +02:00
Hauke Mehrtens efa1960abb kernel: update kernel 4.4 to version 4.4.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-13 15:39:15 +02:00
Jonas Gorski eae812ddb6 brcm63xx: fix image generation with offsets/blocksizes != 64K
Defer the CFE_EXTRAs evaluation to allow overriden BLOCK_SIZE and
IMAGE_OFFSET take effect, and replace the unused IMAGE_SIZE with
IMAGE_OFFSET in DEVICE_VARS.

This fixes image generation for targets using different offsets or
blocksizes.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-07-09 13:41:53 +02:00
Jonas Gorski 0bed85bbca brcm63xx: fix CVG834G compatible string
The CVG834G claimed to be a BCM6348, but is actually BCM3368. Since we
don't test against it, this was harmless.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-07-09 13:41:50 +02:00
Ben Whitten b7baaaf782 kernel: Move append-dtb to common image-commands
This build step is used by various targets, move it to a common section.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-06-22 19:32:06 +02:00
Álvaro Fernández Rojas a95d64a269 brcm63xx: simplify block size and image offset options
Instead of having CFE_EXTRAS for every device that need specific block sizes
and image offset, let's define a couple of vars which can be customized for
each device.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 16:42:47 +02:00
Álvaro Fernández Rojas 13253fbcbd brcm63xx: add sysupgrade images
Some devices require padded images in order to prevent CFE from flashing them
to the wrong offset.
For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this
implies 8 and 16 MB images, which is way too large and some devices aren't
capable of flashing them through sysupgrade.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 16:42:44 +02:00
Jonas Gorski d61d82e3d3 brcm63xx: merge DSL-274X-F1 profiles
The only difference is a field in the image tag header, so just define
two images for it instead of treating them as separate devices.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00
Jonas Gorski a89f5e795a brcm63xx: move the bootargs into the dtb files
Instead of using a fixed commandline, allow one per device.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00
Jonas Gorski 80403e4558 brcm63xx: use upstreamed compatible name for the periph intc
This makes the eventual migration to bmips easier, as dts files
will require less changes.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00
Daniel Gonzalez 29444e4754 brcm63xx: fix external IRQs
External IRQs are currently broken, fix the BCM6345_EXT_IRQ driver.

Since the adoption of the new driver irq-bcm6345-ext, in Chaos Calmer,
external IRQs don't work. It seems there were some minor errors at the initial
development of the driver.

This patch fixes the ticket https://dev.openwrt.org/ticket/21613

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:21 +02:00
Álvaro Fernández Rojas 6b5f6d6601 brcm63xx: fix single profile selection
Fixes commit c6990347.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:21 +02:00
Rafał Miłecki cf6d9d97fb kernel: rename B53 symbols to avoid upstream kernel conflict
In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same
symbols as our b53 does. Change our symbols so both drivers can coexist
in kernel tree.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-20 08:00:14 +02:00
Álvaro Fernández Rojas 98d418e05f brcm63xx: improve image/Makefile
- Use KERNEL_INITRAMFS_SUFFIX for customizing initramfs name.
- Modifying $(PROFILES) is no longer needed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 09:16:37 +02:00
Álvaro Fernández Rojas a0ea3eab63 brcm63xx: fix typo image/Makefile
This typo was introduced in c6990347

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-05 15:42:27 +02:00
Graham Fairweather 532c3f3218 brcm63xx: add initial support for Netgear EVG2000
This patch adds support for the Netgear EVG2000 VoIP Gateway to the
bcm63xx targets.

This device was not sold to the general public, but rather is/was
provided by telcos to customers in Sweden, Australia, Singapore and
other parts of asia.

Known issues:
 - Unable to detect 53115 switch. This appear to be a problem with
probing for the PHY using MDIO and results in error 5. Doesn't seem to
be a problem with the configuration, and could use someone with
experience to have a look at it.
 - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver
fails to load the firmware for the 4322, so 802.11n is not supported.

More info on the device and the research can be found at:
https://wiki.openwrt.org/toh/netgear/evg2000
https://wikidevi.com/wiki/Netgear_EVG2000
https://github.com/Xotic750/mirror-lede/tree/evg2000
https://forum.openwrt.org/viewtopic.php?id=63950

Signed-off-by: Graham Fairweather <xotic750@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:45:08 +02:00
Álvaro Fernández Rojas a529b41cff brcm63xx: set DSL-274XB-F1 ath9k LED as active high
D-Link DSL-274XB rev F1 has an active high ath9k LED.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:40:51 +02:00
Álvaro Fernández Rojas 85a0a908e3 brcm63xx: set HG556a A/B ath9k LED as active high
Huawei HG556a has an active high ath9k LED.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:36:23 +02:00
Álvaro Fernández Rojas 7807c7e867 brcm63xx: add support for inverting ath9k LED polarity
Some devices with ath9k WiFi require changing the default active low
polarity to high in order to correctly operate the WiFi status LEDs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:35:46 +02:00
Álvaro Fernández Rojas ec95509af4 brcm63xx: remove obsolote preinit scripts and fix preinit iface script
These scripts were causing ip issues in the latest version of LEDE:
https://gist.github.com/Noltari/6d20d8bcbe236caf516c0a73f5477d00

Fixes preinit iface script by making eth0 the default ifname and only changing
it to eth1 for the devices that specifically need it.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:30:06 +02:00
Álvaro Fernández Rojas c69903473b brcm63xx: move profiles definitions to image/Makefile
This switches brcm63xx to the new profile definition system in image/Makefile

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:27:48 +02:00
Álvaro Fernández Rojas 2dc7f99662 brcm63xx: refresh kernel patches and config
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:25:18 +02:00
Álvaro Fernández Rojas fd7786159d brcm63xx: drop linux 4.1 support
Switch to linux 4.4 now that it has been enough tested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:25:11 +02:00
Álvaro Fernández Rojas 23273044a8 brcm63xx: switch to linux 4.4
Boot tested on AR-5381u, AR-5387un and WAP-5813n

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:25:04 +02:00
Álvaro Fernández Rojas 794383b801 brcm63xx: fix F@ST2704V2 image generation
This device needs the firmware padded to 4MB.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-01 21:47:42 +02:00
Hauke Mehrtens fcbc97ad78 kernel: update kernel 4.1 to version 4.1.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49035
2016-03-18 23:41:21 +00:00
Hauke Mehrtens b3aae4c672 kernel: update kernel 4.4 to version 4.4.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49032
2016-03-17 21:41:07 +00:00
John Crispin 69b28c5382 brcm63xx: fix BCM3368 interrupt controller addresses
Looks like the addresses for BCM3368 were wrongly defined when DT
support was introduced.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48980
2016-03-10 19:10:58 +00:00
John Crispin 01ca7a34f0 brcm63xx/lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.

The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
its arguments, those will be stored in the 'workspace' area instead
of the stack.

Because the workspace area is also used by other part of the code, the
saved register values gets overwritten and this often leads to failed
kernel boots.

Fix the code to reserve stack space for the registers to avoid this
error.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
[noltari: apply the fix for brcm63xx too]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48979
2016-03-10 19:10:54 +00:00
Hauke Mehrtens cb04b8d582 kernel: update kernel 4.4 to version 4.4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
2016-02-25 21:54:39 +00:00
Felix Fietkau 57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
Jonas Gorski 065a240345 brcm63xx: fix build of lzma-loader with binutils 2.25.1
Apply the same fix as ar71xx needed in r46893.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48473
2016-01-24 12:36:10 +00:00
Jonas Gorski a78bb9590f brcm63xx: add support for Huawei HG622
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48305
2016-01-18 10:47:23 +00:00
Jonas Gorski 74aca7d913 brcm63xx: fix platform gpio lookups for gpios < 32
Overwriting static strings is never a good idea, especially expecting
identical strings to be stored in different memory locations.

This caused the lookups to always return the second chip's name. Fix
this by just initializing the lookup with the right values, so we
don't need to modify the strings at all.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48303
2016-01-18 10:46:50 +00:00
Hauke Mehrtens 93b50ade93 kernel/4.1: update to version 4.1.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48223
2016-01-12 20:51:34 +00:00
Felix Fietkau 2499a57d92 targets: add kernel image dependencies on device tree files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48146
2016-01-06 18:39:06 +00:00
Jo-Philipp Wich 67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich 708c0212e7 brcm63xx: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47754
2015-12-04 12:32:36 +00:00
Jonas Gorski e395433178 brcm63xx: add linux 4.4 support
Only netboot tested. Flash at your own risk.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47702
2015-12-02 22:24:46 +00:00
Jonas Gorski d12502b666 brcm63xx: Add NuCom R5010UNv2 support
This patch adds support for the NuCom R5010UNv2.

It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.

It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707

Tested-by: Angel Fontan <angel.fontan@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47697
2015-12-02 22:18:20 +00:00
Jonas Gorski 9d7e058a23 brcm63xx: drop 3.18 support
Drop 3.18 support; it will live on in CC.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47696
2015-12-02 22:16:37 +00:00
Felix Fietkau bb1c915f1e kernel: update m25p80 in 4.1 to the latest version from 4.4-rc1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47624
2015-11-24 18:59:28 +00:00
Jonas Gorski 1e43316cb9 brcm63xx: fix brcm, bcm6345-ext-intc interrupt controller
brcm,field-width is read but unused

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47379
2015-11-04 11:33:16 +00:00
Jonas Gorski 64af3295cd brcm63xx: fix Netgear CVG834G HCS magic bytes
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47378
2015-11-04 11:33:10 +00:00
Jonas Gorski 8f3cfe4ba2 brcm63xx: lzma-loader: add BCM3380 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47377
2015-11-04 11:33:07 +00:00
Jonas Gorski 4c43b05dac brcm63xx: lzma-loader: add BCM3368 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47376
2015-11-04 11:33:03 +00:00
Jonas Gorski a15f148cf8 brcm63xx: fix BCM3368 external interrupts
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47375
2015-11-04 11:32:55 +00:00
Jonas Gorski 7d6cff4882 kernel: update 3.18 to 3.18.21
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46768
2015-09-02 10:18:15 +00:00
Jonas Gorski 09609b4e44 brcm63xx: disable the openwrt commandline hack
We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46757
2015-08-30 12:18:00 +00:00
Jonas Gorski 5ebd02e8d5 brcm63xx: remove legacy led/button related patches
We register all gpio buttons and leds through DT, so no need to keep
fixes/additions for the platform data based bay.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46753
2015-08-30 12:17:52 +00:00
Jonas Gorski 78f253f9b1 brcm63xx: add Comtrend VR-3026e support
Add support for Comtrend VR-3026e v1.
The device is almost identical to the Comtrend VR-3025un.

Signed-off-by: Martin Tesar <tesarmar@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46752
2015-08-30 12:17:46 +00:00
Jonas Gorski 05a3cdd71f brcm63xx: fix WAP-5813n default network config
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.

Closes #20407.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46727
2015-08-26 13:03:09 +00:00
Jonas Gorski 77a70a0716 brcm63xx: enable dual rx/tx spi support for hsspi
should improve flash access times. Should be harmless to gnerally
enable regardless if a flash supporting dual reads is attached. In
doubt, spi-nor will just fall back to serial reads.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46725
2015-08-25 22:04:53 +00:00
Jonas Gorski 2d379e796f kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46713
2015-08-23 18:06:11 +00:00
Jonas Gorski ecdce239a5 brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46707
2015-08-23 09:35:56 +00:00
Jonas Gorski 4e81a1473e brcm63xx: move gzip build command to include/image.mk
Allow other targets to make use of it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46601
2015-08-14 15:10:47 +00:00
Jonas Gorski 6be2305da8 kernel: update 4.1 to 4.1.5
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.5

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46598
2015-08-14 13:06:33 +00:00
Jonas Gorski 8e69c9f7ef image.mk: store the device name variable
Make the device name accessible for any build commands instead of
forcing targets to define it themselves.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46597
2015-08-14 13:05:22 +00:00
Jonas Gorski 4ecae78c16 image.mk: replace all Build/netgear-chk with a generic implementation
Instead of letting each target define it themselves, create on in
include/image.mk and let the targets use it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46596
2015-08-14 13:05:14 +00:00
Jonas Gorski 79b733264b brcm63xx: prefix netgear specific device variables with NETGEAR_
Rename BOARD_ID to NETGEAR_BOARD_ID.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46595
2015-08-14 13:04:43 +00:00
Hauke Mehrtens 0b8643af4f kernel: update 3.18 to 3.18.20
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46570
2015-08-09 11:09:52 +00:00
Jonas Gorski 3368b4799b brcm63xx: fix crash on 6358/6368 when booting from thread 1
It looks like RAC flushes cause random corruption(?) when the
second thread is set as default.

Fixes #20160.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46563
2015-08-05 13:55:42 +00:00
Jonas Gorski a105688c87 brcm63xx: Add support for Plusnet 2704N
BCM6318: add support for Plusnet / Sagem 2704N (V1)
Signed-off-by: Matt Goring <matt.goring@googlemail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46562
2015-08-05 13:55:37 +00:00
Jonas Gorski 65654a3c54 brcm63xx: build image for DSL-275XB D1
It boots fine, so no reason to not build it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46561
2015-08-05 13:55:18 +00:00
Jonas Gorski ef78a63997 brcm63xx: switch to new image building system
Switches BCM63xx to the new IB system.
Images are generated per device definitions.
There are no changes in the produced images except for some name changes,
caused by the new IB system.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46490
2015-07-25 12:12:11 +00:00
Jonas Gorski 5a62d503d9 brcm63xx: use new tool for generating redboot images
Simplify image/Makefile by using the new perl script for RedBoot.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46489
2015-07-25 12:12:06 +00:00
Jonas Gorski 4981c7da0d brcm63xx: make use of dt-includes
Now that we have a dtc command that invokes the preprocessor, make use
of it and replace the magic numbers with KEY_* defines.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46391
2015-07-16 11:15:02 +00:00
Jonas Gorski 71e0bd0165 brcm63xx: make use of the new BuildDTB command
Now that we have a BuildDTB command, make use of it instead of calling
dtc directly.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46390
2015-07-16 11:13:47 +00:00
Jonas Gorski 491cfb06d0 brcm63xx: HG553 buttons support
This patch adds buttons support for Huawei EchoLife HG553.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46388
2015-07-16 11:12:41 +00:00
Jonas Gorski 730f06410e brcm63xx: switch to 4.1
Switch brcm63xx to 4.1 to give it some initial testing, but keep 3.18
at least until CC-final is out.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46386
2015-07-15 14:42:04 +00:00
John Crispin 096b3759a9 build: Prevent more gzip timestamps
To improve reproducibility, prevent the inclusion of timestamps
in the gzip header.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 46361
2015-07-14 09:57:45 +00:00
Jonas Gorski 1e8c3d2769 brcm63xx: use IRQCHIP_DECLARE instead of self-baked version
Backport a commit from 4.2 making IRQCHIP_DECLARE available outside of
drivers/irqchip and use it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46183
2015-07-05 21:31:52 +00:00