Commit Graph

33082 Commits (c977dfbec349045eead45a6c3e6d2059fc44d93f)

Author SHA1 Message Date
John Crispin 3ef6120edb tools/scons: update to 2.4.1
Update scons to 2.4.1.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 47569
2015-11-21 21:26:06 +00:00
John Crispin 9ffd80fef5 tools/cmake: update to 3.4.0
Update cmake to 3.4.0.
Refresh patches.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 47568
2015-11-21 21:26:02 +00:00
John Crispin 058275197b kernel/generic: 3.18, 4.y: Add support for Quectel EC20 Mini PCIe module
* both patches (qcserial/qmi_wwan) were submitted upstream[1,2]
* build tested on 3.18 and 4.1
* run tested on imx6 platform with 4.1

1. http://article.gmane.org/gmane.linux.usb.general/132998
2. http://article.gmane.org/gmane.linux.usb.general/133113

Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47567
2015-11-21 21:25:54 +00:00
John Crispin 570c35a599 lantiq: add phy led config support over devicetree bindings
This patch adds the posibility to config the led behaviour of the lantiq phys
over the devicetree bindings.It patches the 0023-NET-PHY-adds-driver-for-lantiq-PHY11G
for 3.18 and 4.1. I have also added a register description overview for
applicable values. This goes to the documentation folder in the linux kernel.

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>

SVN-Revision: 47566
2015-11-21 21:25:43 +00:00
John Crispin 55ee2e0ef7 ralink: add missing nand layer hack
It turned out that mtk_nand driver uses some sophisticated accounting and a
general nand code must be patched.

This patch adds required read and erase calls to a general nand code. I
used a  code  for re6500 released by Linksys as a reference.

All required operations (erase, write and read) are usable. However I found
that jffs2 filesystem can be created only on top of a ubi volume. I tried
to create jffs2 directly on mtd device but pages with clean markers are
became uncorrectable.

Signed-off-by: Kirill Berezin <fyiwdt@gmail.com>

SVN-Revision: 47565
2015-11-21 21:25:33 +00:00
John Crispin 0d5f66f3b2 kernel: fix building RTC drivers
All RTC drivers require the kernel to be built with CONFIG_RTC_CLASS=y.
Set it accordingly.

Tested only with DS1307.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 47564
2015-11-21 21:25:28 +00:00
John Crispin 0206a400cf lantiq: tweak DWC2 default parameters
This patch improves the default configuration of DWC2 on lantiq SoCs
somewhat:
 * Set maximum packet count to largest allowed value by the DWC2 (511)
 * Use 16-bit DMA bursts
 * Divide fifo buffers more evenly

Default fifo buffer sizes from original ltq-hcd driver seem really
irrational. For example according to DWC2 data book rxfifo size of 240
will not fit even a single full length USB packet. On the other hand
non-periodic tx fifo size of 240 is more than enough to fit one complete
packet.

Change the sizes around to improve the situation and to fix some issues
especially with isochronous USB transfers.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 47563
2015-11-21 21:25:20 +00:00
John Crispin 1f51472346 brcm2708: enable hard float ABI
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47562
2015-11-21 21:25:13 +00:00
John Crispin 31f9aec7d6 brcm2708: add support for multi-device images
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47561
2015-11-21 21:25:04 +00:00
John Crispin a429d6998e brcm2708: rename image device definition
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47560
2015-11-21 21:24:57 +00:00
John Crispin edff980107 brcm2708: revert sd image extension to .img
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47559
2015-11-21 21:24:50 +00:00
John Crispin 223d88f843 brcm2708: simplify gzip image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47558
2015-11-21 21:24:44 +00:00
John Crispin 40ddc71cc9 ramips: init usb power for Lenovo Y1S
Signed-off-by: Shonn Lu <countrysideboy@qq.com>

SVN-Revision: 47557
2015-11-21 21:24:38 +00:00
John Crispin 27ac4ce928 mac80211: fix autoprobing of mt7601u driver
Strigng passed to autoprobing script should match
module's name. Currently that string is missing trailing "u".

With that change mt7601u driver really gets autoloaded on
USB Wi-Fi dongle insertion:
------------------>8---------------
[    0.930000] hub 2-0:1.0: USB hub found
[    0.940000] hub 2-0:1.0: 1 port detected
[    1.150000] usb 1-1: new high-speed USB device number 2 using
ehci-platform
[    1.720000] init: - preinit -
Detected arc-sdp // Synopsys AXS101 Development Board
[    1.810000] random: mktemp urandom read with 3 bits of entropy
available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug
level
[    4.940000] procd: - early -
[    5.540000] procd: - ubus -
[    6.550000] procd: - init -
Please press Enter to activate this console.
[    7.160000] Loading modules backported from Linux version
master-2015-10-26-0-g28c26cb
[    7.170000] Backport generated by backports.git
backports-20150903-4-g12cf266
[    7.200000] cfg80211: World regulatory domain updated:
[    7.230000] cfg80211:  DFS Master region: unset
[    7.230000] cfg80211:   (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[    7.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[    7.270000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[    7.290000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.290000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.310000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[    7.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[    7.330000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[    7.470000] usb 1-1: reset high-speed USB device number 2 using
ehci-platform
[    7.620000] mt7601u 1-1:1.0: ASIC revision: 76010001 MAC revision:
76010500
[    7.630000] mt7601u 1-1:1.0: Firmware Version: 0.1.00 Build: 7640
Build time: 201302052146____
[    8.040000] mt7601u 1-1:1.0: Warning: unsupported EEPROM version 0d
[    8.050000] mt7601u 1-1:1.0: EEPROM ver:0d fae:00
[    8.050000] mt7601u 1-1:1.0: EEPROM country region 01 (channels 1-13)
[    8.320000] usbcore: registered new interface driver mt7601u
------------------>8---------------

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>

SVN-Revision: 47556
2015-11-21 21:24:28 +00:00
John Crispin d6550887a9 ar71xx: fix the SingleProfile kernel size limit for dLAN devices
it ends up as $(2) of CatFiles and must be a plain decimal value.

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 47555
2015-11-21 21:24:23 +00:00
John Crispin 99fd9a7041 ar71xx: add support for the devolo dLAN Hotspot
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 47554
2015-11-21 21:24:18 +00:00
John Crispin ac23207803 ar71xx: fix AR71XX_MODEL on TP-Link TL-WR703N
The hwid check was wrong, causing the AR71XX_MODEL value to end with a
space (as $hwver was unset).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47553
2015-11-21 21:24:11 +00:00
John Crispin a46292c0dc oxnas: add missing platform bindings for stmmac glue
r47218 was missing needed changes which were accidentally
ommitted from the patch.

This should fix #20878

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47552
2015-11-21 21:24:03 +00:00
Hauke Mehrtens 31d7b4fc95 kernel: make kmod-usb-dwc2 depend on kmod-usb-gadget on omap target
This dependency is missing for the omap target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47551
2015-11-21 17:40:46 +00:00
Hauke Mehrtens 49dcbf9f43 kernel: fix build of kmod-dwc2
dwc2_platform.koi is included in dwc2.ko with kernel 4.3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47550
2015-11-21 17:36:31 +00:00
Hauke Mehrtens 9f87a0d352 kernel: add missing config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47549
2015-11-21 17:35:59 +00:00
Felix Fietkau 988be54b22 ath10k: select kernel relayfs support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47548
2015-11-21 10:55:36 +00:00
Felix Fietkau 4018f15e21 ipq806x: fix PCIe reset gpio handling - the core already handles the active-low flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47547
2015-11-21 10:55:29 +00:00
Felix Fietkau 155469b1f9 ipq806x: assert AHB PCIe reset during init
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47546
2015-11-21 10:55:17 +00:00
Felix Fietkau 9c114740ef ipq806x: reduce PCIe buffer size setting to fix potential data corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47545
2015-11-21 10:55:05 +00:00
Felix Fietkau 49d4a980d7 ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47544
2015-11-21 10:54:58 +00:00
Felix Fietkau 575413a779 ipq806x: fix pcie tx0-term-offset setting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47543
2015-11-21 10:54:53 +00:00
Felix Fietkau 44b8472f16 ipq806x: fix device tree nodes for PCI to get rid of I/O and memory offsets
Fixes QCA99x0 detection issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47542
2015-11-21 10:54:48 +00:00
Jo-Philipp Wich e20b689249 mvebu: migrate led and network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47541
2015-11-20 23:59:31 +00:00
Jo-Philipp Wich 8e79f25991 mpc85xx: migrate network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47540
2015-11-20 23:52:31 +00:00
Hauke Mehrtens 53d94f89e8 uboot-omap: fix build with gcc-5
This fixes some problems with gcc-5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47539
2015-11-20 23:38:39 +00:00
Jo-Philipp Wich 605621fc3f ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2 (again)
When fixing the model string for WNDR3700v2 which contain a model string
followed by 0xff in r46455, the match for other versions of the WNDR3700v2
which just contain lots of 0xff broke (as the 0xff $model is checked for
is stripped off).

Fix by stripping off non-printable characters only for the actual output
string, but not for the internal matching.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47538
2015-11-20 23:34:11 +00:00
Hauke Mehrtens 923a59315c uboot-kirkwood: fix build with gcc-5
This backports a patch from upstream u-boot to make it compile with gcc-5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47537
2015-11-20 22:50:11 +00:00
Hauke Mehrtens 70a9188d18 kernel: add missing config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47536
2015-11-20 22:33:59 +00:00
Hauke Mehrtens dc2b471d6a uboot-oxnas: fix build with gcc-5
This backports a patch from upstream u-boot to make it compile with gcc-5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47535
2015-11-20 22:22:37 +00:00
Jo-Philipp Wich ade2c06d61 ar71xx: migrate led and network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47534
2015-11-20 22:14:36 +00:00
Hauke Mehrtens 4afee42560 uboot-mxs: fix build with gcc-5
gcc-5 handles inline without static differently and that makes
uboot-mxs fail to build. Remove the inline so it gets exported and can
be used in other functions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47533
2015-11-20 21:15:48 +00:00
Luka Perkov 8d8ef5288c imx6: ventana: remove invalid video options from bootscript
Removed video related kernel params that are only appropriate for the
Freescale downstream vendor kernel and not appriate for mainline linux.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47532
2015-11-20 05:21:19 +00:00
Felix Fietkau d85d4778fc ubus: update to the latest version, adds support for monitoring system bus traffic
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47531
2015-11-19 21:49:26 +00:00
Hauke Mehrtens 2edb8d3a51 ath10k-firmware: fix patch of firmware
This fixes a build error.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47517
2015-11-19 19:36:03 +00:00
Zoltan Herpai d5a77a0dbc packages: uboot-sunxi: update Lamobo R1 patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47516
2015-11-19 14:43:16 +00:00
Steven Barth 0c450f1f47 odhcpd: correctly handle netlink congestion case
Thanks to @ktgeek and @willmo for diagnosing

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 47514
2015-11-19 11:49:21 +00:00
Luka Perkov d8d318f344 imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47513
2015-11-19 08:00:17 +00:00
Luka Perkov 71a92988e3 imx6: remove obsolete VENTANA_DTS from profile
The device-tree files are now specified in the image Makefile

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47512
2015-11-18 22:53:43 +00:00
Luka Perkov baa8b933ec imx6: add Vetnana LVDS support
These patches have been submitted to upstream Linux and are pending acceptance.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47511
2015-11-18 22:06:54 +00:00
Luka Perkov 7b931ba95c imx6: ventana: fix GW16083 device-tree patch
The 206-ARM-imx-ventana-added-GW16083-to-device-tree.patch merged wrong in
the conversion from 3.18 to 4.1. This patch resolves that and puts the
device-tree nodes in the correct place.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47510
2015-11-18 22:06:50 +00:00
Luka Perkov 5f3d29f4e6 imx6: drop support for kernel 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47509
2015-11-18 21:36:36 +00:00
Luka Perkov 03401fed5e imx6: convert ventana images to squashfs+ubifs overlay
Replace the ventana ubi images from a single rootfs volume containing the
rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi
containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs'
squasfs volume, and rootfs_data an empty ubifs volume.

At the same time move ventana image creation over to using the new
TARGET_DEVICE syntax as a cleanup.

Additionally removed FIT image creation as it is recommended that this be
done manually to produce signed FIT images if needed.

Note that a bootscript is needed for Ventana to change its default mtdparts
to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there
are patches in OpenWrt kernels that try to auto-attach and auto-mount and these
get in the way if the mtd partition is named 'rootfs'.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
Luka Perkov ca26bf8932 imx6: kernel: add UBI_BLOCK support
UBI_BLOCK support is needed for mounting squashfs over UBI

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47507
2015-11-18 21:35:16 +00:00
Luka Perkov 486dc85e72 imx6: switch to v4.1
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47506
2015-11-18 21:35:12 +00:00