f50b02b559
ramips: rt288x: change base address and window size of flash bank 0
...
SVN-Revision: 29616
2011-12-28 08:43:36 +00:00
98437278c4
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
...
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
723d8dd74f
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
...
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
7b1e525b56
ramips: initial support for Sitecom WL-351 v1 002
...
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
2cb946f5b4
ramips: add support for the Senao/EnGenius ESR-9753 board
...
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
03bce34384
ramips: define firmware partition for Omnima MiniEMBWiFi
...
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
SVN-Revision: 29602
2011-12-23 14:27:05 +00:00
0c38d36488
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
43bd4c6ad1
ramips: fix mac addresses on the DIR-300/600 boards
...
SVN-Revision: 29471
2011-12-06 20:06:08 +00:00
5ef6ec4a31
ramips: set mac addresses for the NBG-419N
...
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>
SVN-Revision: 29454
2011-12-05 17:27:07 +00:00
750d560767
ramips: set preinit interface mac on the hw550-3g board
...
Based on a patch by Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29453
2011-12-05 17:27:06 +00:00
b5d7b359b2
ramips: use ramips_get_mac_* functions in the preinit script
...
SVN-Revision: 29452
2011-12-05 17:27:04 +00:00
4d5b940e66
ramips: move ramips_get_mac_* functions to lib/ramips.sh
...
SVN-Revision: 29451
2011-12-05 17:27:03 +00:00
cc853acb3a
ramips: add ramips_ prefix to get_mac_{binary,nvram} functions
...
SVN-Revision: 29450
2011-12-05 17:27:02 +00:00
b1137d48a4
ramips: fix network configuration setup
...
SVN-Revision: 29448
2011-12-05 16:54:48 +00:00
56c9b50006
ramips: fix argus board rootfs size
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29422
2011-12-04 15:24:57 +00:00
3fccc3b376
ramips: enable sysupgrade on the RT-N15 board
...
SVN-Revision: 29393
2011-12-01 22:48:58 +00:00
4b2d1c3ad3
ramips: wrap long line in platform upgrade script
...
SVN-Revision: 29392
2011-12-01 22:48:57 +00:00
d622263588
ramips: add profile for the Asus RT-N15
...
This uses previously submitted rtl8366 kernel packages.
[juhosg: The kmod-gpio-dev package has been removed from the package list.]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29391
2011-12-01 22:48:55 +00:00
3a9e02fa41
ramips: setup default network configuration for RT-N15
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29390
2011-12-01 22:48:54 +00:00
fc61c107f0
ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile
...
It is needed by the RT-N15 board.
SVN-Revision: 29389
2011-12-01 22:48:53 +00:00
80221fcd2a
ramips: remove default network configuration, and generate that from uci-defaults
...
SVN-Revision: 29387
2011-12-01 22:48:51 +00:00
4f6c58adac
ramips: use /lib/functions/uci-defaults.sh
...
SVN-Revision: 29386
2011-12-01 22:48:48 +00:00
569d8de6d6
ramips: simplify uci-defaults/network script
...
SVN-Revision: 29383
2011-12-01 22:48:45 +00:00
66c9a351dd
ramips: setup mac and network interfaces from separate functions
...
SVN-Revision: 29382
2011-12-01 22:48:43 +00:00
62d18e9f9a
ramips: fix Asus RT-N15 board support
...
Fix Asus RT-N15 flash partitions and make an image.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29381
2011-12-01 22:48:42 +00:00
2dd79d55c7
ramips: Sparklan wcr-150gn board fixes
...
* Fix partition sizes.
* Add buttons and leds.
* Register usb.
* Remove unnecessary stuff from image Makefile
* Fix rt2x00 eeprom extract.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29380
2011-12-01 22:48:41 +00:00
7c678e7511
ramips: fix package name of kmod-input-gpio-buttons
...
Based on a patch from Omnima Limited.
SVN-Revision: 29379
2011-12-01 22:48:39 +00:00
2ed38b24a8
ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29378
2011-12-01 22:48:38 +00:00
295e04084c
ramips: setup bc2 mac addresses from the generic network script
...
SVN-Revision: 29377
2011-12-01 22:48:37 +00:00
02f95d4fb3
ramips: combine network setup for all boards in one file
...
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.
[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 29376
2011-12-01 22:48:35 +00:00
17ccd4aec4
rt305x: Create factory image for Fonera 2.0n
...
SVN-Revision: 28689
2011-10-31 09:23:44 +00:00
ee8077f0fe
ramips: Support for NexAira BC2
...
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]
Signed-off-by: Adam Porter <porter.adam at gmail.com>
SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
18452a753b
ramips: fix switch-port assignment for HW550-3G
...
WAN is on swtich port 0 for Aztech HW550-3G.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28570
2011-10-24 21:49:32 +00:00
68a01c0180
ramips: combine led setup for all boards in one file
...
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
72e117ec79
ramips: rt305x: add support for the ZyXEL NBG-419N board
...
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
4b96d3af2a
ramips: rt305x: remove unused defines from mach-nw718.c
...
SVN-Revision: 28077
2011-08-22 20:41:48 +00:00
462ca22e9c
ramips: sort Makefile entries
...
SVN-Revision: 28076
2011-08-22 20:41:47 +00:00
d50494f3bb
ramips: sort RAMIPS_MACH_* defines
...
SVN-Revision: 28075
2011-08-22 20:41:45 +00:00
90686691ce
ramips: fix wireless firmware extraction for wr512-3gn
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
SVN-Revision: 28073
2011-08-22 18:08:45 +00:00
f0049824b9
ramips: remove 'default [yn]' keywords from machine Kconfig entries
...
SVN-Revision: 28054
2011-08-19 15:55:12 +00:00
6720025497
ramips: rt305x: fix wr512n image generation
...
SVN-Revision: 28053
2011-08-19 15:55:11 +00:00
9085b05d9e
ramips: rt305x: support for wr512-3gn-like routers
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
46b101ad0a
ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28051
2011-08-19 15:55:08 +00:00
05209860da
ramips: fix wireless on Belkin F5D8235 v2
...
Fix wireless firmware extract from flash for Belkin F5D8235 v2.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28050
2011-08-19 15:55:07 +00:00
f8ab604eb6
ramips: fix typo in default packages
...
Fix fivebytepypo - there is no such kernel module wpad-mini :)
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28049
2011-08-19 15:55:05 +00:00
09b1073f9b
kernel: update kernel to version 2.6.39.4
...
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
ace8ce0845
ramips: use maccalc instead of hexdump + sed
...
SVN-Revision: 28007
2011-08-15 19:00:23 +00:00
bfc47ffead
ramips: rt305x: fix mac addresses on the Netcore NW718 board
...
SVN-Revision: 28006
2011-08-15 18:55:53 +00:00
17c041cd0b
ramips: add maccalc to the default package list
...
SVN-Revision: 28005
2011-08-15 18:55:52 +00:00
67e480971c
ramips: add input drivers to the default package list
...
SVN-Revision: 28003
2011-08-15 18:55:50 +00:00
35ecf12059
ramips: rt305x: make config and factory partitions read-only on the ATP-52B
...
SVN-Revision: 28002
2011-08-15 18:55:48 +00:00
75e2360ab3
ramips: add uci-defaults scripts to preconfigure USB LEDs
...
SVN-Revision: 28000
2011-08-15 14:12:00 +00:00
e1b176de82
ramips: rt305x: add some USB modules to the default profile
...
SVN-Revision: 27999
2011-08-15 14:11:58 +00:00
169d68c98c
ramips: rt305x: add dwc_otg driver
...
Based on a patch by Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27997
2011-08-15 14:11:55 +00:00
0ca16a4600
ramips: rt305x: register the dwc_otg device on the relevant boards
...
SVN-Revision: 27996
2011-08-15 14:11:52 +00:00
addc86fdbd
ramips: rt305x: add dwc_otg platform device
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 27995
2011-08-15 14:11:51 +00:00
6ef87ff5e6
ramips: sync kernel config
...
SVN-Revision: 27993
2011-08-15 14:11:48 +00:00
4ee4fc9725
ramips: load the input drivers during preinit
...
SVN-Revision: 27992
2011-08-15 14:11:47 +00:00
a3c7e71ae1
ramips: add support for Argus ATP-52B
...
[The ESW related changes has been removed - juhosg]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 27991
2011-08-15 14:11:45 +00:00
1ebcf03789
ramips: allow to specify port layout for the switch of the RT305x/RT3350
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
SVN-Revision: 27990
2011-08-15 14:11:43 +00:00
ea211c4d90
ramips: rt305x: add support for the Netcore NW718 board
...
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
437e184484
ramips: rt305x: add support for the Asus RT-G32 B1 board
...
Based on a patch by: Sergiy <piratfm@gmail.com>
SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
7193f29d96
ramips: rt305x: enable M25P80 driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27811
2011-07-28 10:56:28 +00:00
c6db514de8
ramips: rt305x: introduce rt305x_register_spi helper
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27810
2011-07-28 10:56:27 +00:00
57122e7ccc
ramips: add SPI controller driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
3f986df05f
ramips: rt305x: add support for the DIR-600 B1,B2 boards
...
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
857c1028ac
ramips: rt305x: change machine id for DIR-300
...
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
42d3a55347
ramips: rt305x: rename LEDs on the DIR-300-B1
...
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
39689b648f
ramips: rt305x: sort Kconfig/Makefile entries
...
SVN-Revision: 27805
2011-07-28 10:56:19 +00:00
32c0534516
ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards
...
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B
Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>
SVN-Revision: 27804
2011-07-28 10:56:18 +00:00
57663ce25b
ramips: fix PWH2004 image generation
...
SVN-Revision: 27803
2011-07-28 10:56:15 +00:00
1afe8a0726
rtl8366: unify rtl8366s and rtl8366rb platform data
...
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
abb1ca01a7
ramips: fix buffalo image generation
...
SVN-Revision: 27495
2011-07-06 16:46:33 +00:00
1a4e7153b6
ramips: add diag support for RT-N15 and PWH2004
...
Also sort the board names alphabetically.
SVN-Revision: 27478
2011-07-06 08:05:00 +00:00
d6985f5b46
ramips: use the 'router' LED for diagnostic on the WHR-G300N board
...
SVN-Revision: 27477
2011-07-06 08:04:55 +00:00
2cc346b8e0
ramips: create tftp image for the WHR-G300N board
...
SVN-Revision: 27476
2011-07-06 08:04:54 +00:00
0dc18d8586
ramips: create factory image for the WHR-G300N board
...
SVN-Revision: 27474
2011-07-06 08:04:52 +00:00
e9c8218375
ramips: create factory image for DIR-300-B1
...
SVN-Revision: 27439
2011-07-04 06:48:45 +00:00
6e7b802297
ramips: merge 2.6.39 patches
...
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
646f64d389
ramips: remove 2.6.37 stuff
...
SVN-Revision: 27398
2011-07-03 15:02:09 +00:00
2fc6be00f4
ramips: switch to 2.6.39.2
...
SVN-Revision: 27397
2011-07-03 15:02:07 +00:00
0fde070cf9
ramips: add 2.6.39 support
...
Based on the patches from #9625
SVN-Revision: 27396
2011-07-03 15:02:06 +00:00
c8010517d5
ramips: add hotplug script to extract eeprom for the rt2x00 driver
...
SVN-Revision: 27393
2011-07-03 15:02:01 +00:00
3334d0604e
ramips: specify eeprom file name on RT305X
...
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
f53cc4c439
ramips: specify eeprom file name on RT288X
...
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
521e495f4b
ramips: add all supported boards to lib/ramips.sh
...
SVN-Revision: 27389
2011-07-03 15:01:56 +00:00
6f54df889a
ramips: check the size of the uImage in image generation
...
SVN-Revision: 27388
2011-07-03 15:01:55 +00:00
575a5286c8
ramips: use lowercase partiion names on the WCR150GN board
...
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
31facf0b75
ramips: use different partition names in the DIR-300-B1 image
...
SVN-Revision: 27386
2011-07-03 15:01:52 +00:00
dbe55f08f0
ramips: force word write on flashes with AMD cmdset ( #9252 )
...
SVN-Revision: 27385
2011-07-03 15:01:51 +00:00
f1cf43d468
ramips: update partition map for DIR-300-B1
...
Patch by Layne Edwards from #9252 .
SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
641c87b127
ramips: consistently use 'firmware' name for sysupgrade partitions
...
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
381d7f05af
ramips: fix a section mismatch warning
...
SVN-Revision: 27382
2011-07-03 15:01:46 +00:00
16ad91d69f
ramips: remove unused include from the common GPIO code
...
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
c9f3e7082f
ramips: disable watchdog on sysupgrade
...
SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
e70e6f6848
ramips: swap target check in image generation
...
SVN-Revision: 27379
2011-07-03 15:01:42 +00:00
affb57ee27
ramips: update HW550-3G mtd partitions
...
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
3099ffe414
ramips: set cp0_perfcount_irq for RT305X
...
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
d5a7e2f5c1
ramips: initial board support for MOFI3500-3GN
...
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This
router is basically the NA version of the HW550-3G.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
50c743e79e
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
87f5872f35
ramips: remove 2.6.36 stuff
...
SVN-Revision: 26329
2011-03-27 19:20:06 +00:00
90d37adb8d
ramips: switch to 2.6.37
...
SVN-Revision: 26328
2011-03-27 19:20:04 +00:00
1844ea6c7b
ramips: UPF_FIXED_TYPE must be set for the serial ports
...
SVN-Revision: 26327
2011-03-27 19:20:03 +00:00
9ef4785364
ramips: define GPIO chips separately for each SoCs
...
SVN-Revision: 26326
2011-03-27 19:19:59 +00:00
37d6d88869
ramips: move GPIO definitions into a separate header file
...
SVN-Revision: 26325
2011-03-27 19:19:57 +00:00
251a367fb4
ramips: setup GPIO chip functions on the fly
...
SVN-Revision: 26324
2011-03-27 19:19:51 +00:00
b03f2dfcee
ramips: use separate register base for GPIO chips
...
SVN-Revision: 26323
2011-03-27 19:19:48 +00:00
8770359f17
ramips: fix dir-300 mtd layout
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 26322
2011-03-27 19:19:45 +00:00
f599459abb
ramips: enable MDIO on the HW550-3G board
...
SVN-Revision: 26321
2011-03-27 19:19:41 +00:00
d701a72760
ramips: add sysupgrade and status LED support for HW550-3G
...
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26320
2011-03-27 19:19:40 +00:00
335877a2b3
global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance
...
SVN-Revision: 26300
2011-03-26 01:07:12 +00:00
23518bb2e4
ramips: initial board support for Aztech HW550-3G
...
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet.
Wireless appears to work fine. USB does not work yet (as with other
Ralink boards).
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26123
2011-03-13 16:34:52 +00:00
45c9f5e75e
update to kernel 2.6.36.4
...
SVN-Revision: 25580
2011-02-19 12:44:07 +00:00
1c92e047c8
ramips: register watchdog device on the rt288x boards
...
SVN-Revision: 25130
2011-01-26 20:48:52 +00:00
2b50cecea6
ramips: add watchdog device for RT288x
...
SVN-Revision: 25129
2011-01-26 20:48:50 +00:00
764aa3fe9c
ramips: register watchdog device on the rt305x boards
...
SVN-Revision: 25128
2011-01-26 20:48:47 +00:00
42e36cf732
ramips: add watchdog device for RT305x
...
SVN-Revision: 25127
2011-01-26 20:48:46 +00:00
16366feafb
ramips: add watchdog driver
...
SVN-Revision: 25126
2011-01-26 20:48:41 +00:00
f38367fcb4
ramips: implement clock API for RT288x
...
SVN-Revision: 25125
2011-01-26 20:48:39 +00:00
b0ffa70248
ramips: implement clock API for RT305X
...
SVN-Revision: 25124
2011-01-26 20:48:35 +00:00
f9e74383a9
ramips: remove extern and __init from function prototypes
...
SVN-Revision: 25123
2011-01-26 20:48:33 +00:00
b99a637795
ramips: ramips_esw: fix typos
...
Patch from #8577 .
SVN-Revision: 24898
2011-01-04 13:44:05 +00:00
d2fdd1dbe1
ramips: remove 2.6.3[24] support
...
SVN-Revision: 24562
2010-12-14 08:00:31 +00:00
1403850be1
ramips: switch to 2.6.36
...
SVN-Revision: 24561
2010-12-14 08:00:29 +00:00
f9898e30fb
ramips: handle OTG interrupt on the RT305x SoC
...
SVN-Revision: 24560
2010-12-14 08:00:25 +00:00
5a351509aa
base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
...
SVN-Revision: 24540
2010-12-13 08:01:21 +00:00
502d21dc2a
ramips: ramips_esw: add more definitions
...
SVN-Revision: 24340
2010-12-08 10:15:33 +00:00
bf58ef7c6d
ramips: ramips_esw: add helper function to set pvid
...
SVN-Revision: 24339
2010-12-08 10:15:28 +00:00
692d379b50
ramips: ramips_esw: add helper function to set vlan members
...
SVN-Revision: 24338
2010-12-08 10:15:25 +00:00
f7c3f91074
ramips: ramips_esw: add helper function to set VLAN id
...
SVN-Revision: 24337
2010-12-08 10:15:22 +00:00
0d2ad7a816
ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function
...
SVN-Revision: 24336
2010-12-08 10:15:16 +00:00
7b878dde4b
ramips: ramips_esw: use rt305x_esw prefix in function names
...
SVN-Revision: 24335
2010-12-08 10:15:14 +00:00
0fcedc7bda
ramips: ramips_esw: coding style cleanup
...
SVN-Revision: 24334
2010-12-08 10:15:12 +00:00
48e6a31812
ramips: ramips_esw: add defines for switch register offsets
...
SVN-Revision: 24333
2010-12-08 10:15:07 +00:00
74c13f06df
ramips: ramips_esw: don't touch GPIO_PURPOSE register
...
It must have been set by the board initialization code.
SVN-Revision: 24332
2010-12-08 10:15:04 +00:00
3b9a6adc7d
ramips: ramips_esw: convert it to be a platform driver
...
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
889729df01
ramips: ramips_esw: move hardware initialization into a separate function
...
SVN-Revision: 24330
2010-12-08 10:14:58 +00:00
8957f39064
ramips: ramips_esw: use a private structure for the functions
...
SVN-Revision: 24329
2010-12-08 10:14:54 +00:00
0449d92dd7
ramips: add support for 2.6.36
...
SVN-Revision: 24270
2010-12-05 20:14:38 +00:00
01a5cb48c8
ramips: default profile fix
...
Fix package names in default profiles.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24269
2010-12-05 20:14:35 +00:00
47dd3b9fea
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
21c8d63505
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
64b16b9f34
ramips: Use NET_IP_ALIGN instead of hardcoding 2
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24124
2010-11-24 10:01:18 +00:00
624cfc5c91
ramips: DMA map the correct RX skb size
...
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24123
2010-11-24 10:01:16 +00:00
f833e399f2
ramips: Don't trigger BUG_ON due to skb allocation failure
...
Instead just drop the rx'ed frame silently and reuse the already
available buffer.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24122
2010-11-24 10:01:12 +00:00
c6e4124855
ramips: Remove unnecessary skb_put
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24121
2010-11-24 10:01:08 +00:00
69355ee10e
ramips: Allow ethernet interface to be taken down and up again
...
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 23243
2010-10-05 14:10:34 +00:00
5f9a6a5431
upgrade kernel versions to the latest stable ones
...
SVN-Revision: 23219
2010-10-04 10:40:41 +00:00
e5b081335e
ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
...
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).
Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>
SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
39c57eeb31
ramips: allow USB
...
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.
This patch is just a small step in that direction.
Signed-off-by: Luis Correia <luis.f.correia@gmail.com>
SVN-Revision: 23128
2010-09-27 14:42:07 +00:00
Gabor Juhos
Vasilis Tsiligiannis
Hauke Mehrtens
Felix Fietkau
Florian Fainelli
Imre Kaloz