Commit Graph

15110 Commits (ba3a749f9b29b40784bb576651142c601d4a7211)

Author SHA1 Message Date
Hauke Mehrtens ba3a749f9b kernel: refresh patches for kernel 4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48222
2016-01-12 20:50:41 +00:00
Felix Fietkau a68d8a660a pxa: moved to targets feed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48217
2016-01-12 10:08:18 +00:00
Felix Fietkau 2172d7dbbf x86: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48216
2016-01-12 10:04:55 +00:00
Felix Fietkau 9e7a66d195 kernel: add missing symbols for linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48215
2016-01-12 10:04:47 +00:00
Felix Fietkau f875e18fd2 kernel: Update kernel 4.4 to 4.4.0
This removes one patch which was applied upstream with commit
67b9bcd36906e12a15ffec19463afbbd6a41660e. All other patches were
refreshed.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48203
2016-01-11 20:13:17 +00:00
Felix Fietkau fed29fa36b x86: remove obsolete patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48190
2016-01-10 17:19:51 +00:00
Felix Fietkau b34a86691f x86: remove the rdc subtarget, it was broken for ages and nobody cared
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48189
2016-01-10 17:19:46 +00:00
Felix Fietkau 826cfa5773 ar71xx: fix ap152 support
- ethernet gigabit pll
- switch configuration
- sysupgrade

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48187
2016-01-10 17:19:34 +00:00
Zoltan Herpai a6611a92d5 sunxi: initial 4.4 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48161
2016-01-09 16:20:39 +00:00
Zoltan Herpai 24894e52bc sunxi: prep module support options for 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48160
2016-01-09 16:19:21 +00:00
Zoltan Herpai 26c04e09a2 kernel/4.4: add missing config options
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48159
2016-01-09 15:42:06 +00:00
Felix Fietkau 471a567a88 ramips: do not rely on $(BIN_DIR) installed files during image build (for ubnt-erx)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48147
2016-01-06 18:39:13 +00:00
Felix Fietkau 2499a57d92 targets: add kernel image dependencies on device tree files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48146
2016-01-06 18:39:06 +00:00
Felix Fietkau 947eac1803 ramips: do not attempt to build ubnt-erx initramfs image if initramfs support is disabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48144
2016-01-06 18:38:44 +00:00
Rafał Miłecki 5f69279dd6 swconfig: add API for setting port link speed
Some switches can force link speed for a port. Let's add API that will
allow drivers to export this feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48142
2016-01-06 18:32:21 +00:00
Felix Fietkau 56608a777e ramips: fix duplicate /dts-v1/ line for WRTNODE2
Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

SVN-Revision: 48138
2016-01-06 00:04:14 +00:00
Felix Fietkau 48a57b1ead ramips: set mips16 support
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>

SVN-Revision: 48131
2016-01-04 22:35:36 +00:00
Zoltan Herpai de4145c102 sunxi: fix Lamobo R1 board detection
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48130
2016-01-04 15:53:36 +00:00
John Crispin e85230ce2e ralink: add a few mt7688 fixes that got lost in the v4.3 bump
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48115
2016-01-04 14:21:24 +00:00
John Crispin eb9fccc440 ralink: update the usb phy driver to the version sent upstream
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48114
2016-01-04 14:21:17 +00:00
John Crispin 9b675a2a33 ralink: fix USB compatible strings
switch to the upstream compatible strings for ehci and ohci support.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48113
2016-01-04 14:21:11 +00:00
Rafał Miłecki e17c1e45ad bcm53xx: fix USB patch breaking 4.4 compilation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48112
2016-01-04 12:28:46 +00:00
Rafał Miłecki ccb7d794ff kernel: update bcma by backporting 4.4 and 4.5 patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48111
2016-01-04 12:22:24 +00:00
Felix Fietkau e14d2aee0a kernel: add at803x fix for sgmii mode
Some (possibly broken) bootloaders incorreclty initialize at8033
phy. This patch enables sgmii autonegotiation mode.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48109
2016-01-03 23:13:16 +00:00
Felix Fietkau 54b4265873 kernel: move at803x phy patch to generic
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48108
2016-01-03 23:13:11 +00:00
Felix Fietkau ef215468f1 ar71xx: ensure that LOADADDR is passed to lzma-loader
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48101
2016-01-03 20:57:16 +00:00
Felix Fietkau f49dadb0bd ar71xx: fix factory images for WNR2200 (#19807)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48085
2016-01-03 14:45:26 +00:00
Felix Fietkau 67877462a2 malta: fix generating network configuration
With the default network config provided by package base-files present,
board_detect won't create a new config from board.json.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 48076
2016-01-03 11:36:26 +00:00
Felix Fietkau 0da9da0d33 ar71xx: another fix to wndr3700_board_detect
My last bugfix (r47538) introduced a new bug in wndr3700_board_detect
(again...).

Assigning the result of ar71xx_get_mtd_offset_size_format to the model
variable before stripping of garbage using awk will cause all NUL bytes to
be removed before awk is applied, leading to model strings like
"NETGEAR WNDRMACv2NETGEAR", where a NUL byte after the v2 is supposed to
terminate the string.

Fix by calling ar71xx_get_mtd_offset_size_format twice, once piping to awk
directly.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 48075
2016-01-03 11:09:45 +00:00
Rafał Miłecki b836a7c29d ledtrig-netdev: don't stop timer on events for different interfaces
This fixes regression introduced in my recent ledtrig-netdev commit.
Events triggered by different interfaces were stopping timer so it
wasn't working for tx/rx mode.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48072
2016-01-02 20:38:56 +00:00
Felix Fietkau c69ffda546 ramips: clean up and refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48070
2016-01-02 14:48:27 +00:00
Felix Fietkau 140be9f1a5 ramips: fix performance counters on mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48069
2016-01-02 14:48:11 +00:00
John Crispin fb2d204ce4 ralink: more esw_rt3050 fixes
the IRQ was not setup properly causing an oops

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48064
2016-01-02 11:44:08 +00:00
Rafał Miłecki ef53dc754f bcm53xx: switch to simpler devm_gpiod_get in USB driver
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48062
2016-01-02 10:49:46 +00:00
Rafał Miłecki 7bede46e58 kernel: make bcm47xxpart work with TRX flashed at bad block(s)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48061
2016-01-02 00:33:48 +00:00
Rafał Miłecki 224984ca01 kernel: drop bcm47xxpart patch for Xiaomi
It was never tested, most likely not working (because of le32_to_cpu)
and not upstreamed.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48060
2016-01-02 00:33:31 +00:00
Imre Kaloz cae1c44e4f generic/4.4: update to 4.4-rc7
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 48059
2016-01-01 22:02:47 +00:00
John Crispin 9242d27b4a V2 ar71xx : Add Support for the Bitmain Antrouter R1
This patch adds support for the Bitmain Antrouter R1

http://wiki.openwrt.org/toh/bitmain/r1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 48058
2016-01-01 21:21:13 +00:00
John Crispin 8c80e915a0 lantiq: Add the xbar to vr9.dts
linux 4.4 (since commit 08b3c894e56580b8ed3e601212a25bda974c3cc2
"MIPS: lantiq: Disable xbar fpi burst mode") requires that the xbar is
defined in the .dts of vrx200 (VR9) SoCs.

SVN-Revision: 48056
2016-01-01 21:21:00 +00:00
John Crispin 6ca6a98622 ramips: Remove LED GPIO definitions in MQmaker WiTi device tree
LED's were defined wrong in the device tree file, they are hardware driven because they are connected directly to the switch chip and wireless chips respectively, thus no GPIO addresses are assigned to them. It is safe to remove them from the device tree file to stop confusion.

Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>

SVN-Revision: 48055
2016-01-01 21:20:54 +00:00
John Crispin de7dce21a3 ralink: add WRTnode2 platform and led support
Signed-off-by: xzmu <xzmu@wrtnode.com>

SVN-Revision: 48049
2016-01-01 21:19:50 +00:00
John Crispin df165974c3 ledtrig-netdev: add support for renamed devices
The ppp0 interface is renamed after the connection is established. Due
to a missing NETDEV_REGISTER event, the ledtrig-netdev isn't aware of
the renamed interface and literally ignores the device
(no tx/rx indication, led isn't switched off with 'ifdown wan').

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48048
2016-01-01 21:19:41 +00:00
John Crispin 6f95d749d6 lantiq: match default xdsl mode and default wan interface
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48047
2016-01-01 21:19:32 +00:00
John Crispin a9896bf106 lantiq: convert vendorid into human readable form
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48046
2016-01-01 21:19:27 +00:00
John Crispin 436fdee272 lantiq: add the current profile to the stats output
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48045
2016-01-01 21:19:21 +00:00
John Crispin 28a700de9b lantiq: TDW8980 - use devicename:colour:function led naming scheme
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48044
2016-01-01 21:19:12 +00:00
John Crispin c584aed6b1 lantiq: P2812HNUFX - move usb leds to P2812HNU-F1
The P2812HNU-F3 doesn't have usb leds. Only the P2812HNU-F1 has those
leds.

Reported-by: Sylwester Petela <sscapi@gmail.com>
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48043
2016-01-01 21:18:59 +00:00
John Crispin 3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
John Crispin 4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00
John Crispin ebc71a4d16 lantiq: use dsl led defined in DTS
dsl_control (dsl_notify.sh) is the only process which is aware of the
state of the atm/ptm interface. Use the dsl led exclusive for the dsl
line state.

On boards which don't have a distinct internet and a dsl led, let the
netdev status of the atm interface trigger the shared led.

Triggering the shared led according to the status of the ppp interface
isn't suitable, since the led would be switched of if the ppp
connection goes down, but the line is still in sync.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48040
2016-01-01 21:18:38 +00:00