Commit Graph

17150 Commits (b7677f05d6a671c42da965df307b879e5615a36d)

Author SHA1 Message Date
Felix Fietkau 4731f02fa2 kirkwood: fix ubi partition name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-30 12:58:20 +01:00
Felix Fietkau 83d59453c0 kirkwood: fix sysupgrade for non-dockstar NAND devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-30 12:58:20 +01:00
Rafał Miłecki 8f5cf323c4 brcm47xx: drop standalone Netgear WGT634U profile
We have profile for this device thanks to DEVICE_PACKAGES now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
2016-12-30 09:23:07 +01:00
Rafał Miłecki b1bdb6e5ea brcm47xx: specify DEVICE_PACKAGES for Netgear WGT634U
This allows using it nicely with PER_DEVICE_ROOTFS.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
2016-12-30 09:22:55 +01:00
Rafał Miłecki c5ca3043d1 bcm53xx: drop unused source file of bcm53xxspiflash
We don't use this driver since commit 741715331a ("bcm53xx: switch to
m25p80 and drop bcm53xxspiflash").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-29 18:07:01 +01:00
Rafał Miłecki ef4fc00c91 brcm47xx: mips74k: fix typo in Netgear WN3000RP model name
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-29 09:41:00 +01:00
Rafał Miłecki 939ef157da ramips: fix NixcoreX1 profiles
There was a typo in Makefile that prevented using these profiles.

Fixes: a75ce960ac ("ramips: use different board names for variants")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-28 23:05:24 +01:00
Sven Roederer 19059d84a4 linux: correct deps for x86-xen-domu target
depending packages have been moved to kernel-config
- kmod-xen-kbddev in 9fde361
- kmod-xen-fs, kmod-xen-evtchn, kmod-xen-netdev in 018807d

this will also fix imagebuilder

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
2016-12-28 10:35:02 +01:00
Felix Fietkau 9c402d03e6 kirkwood: enable initramfs images by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:52:18 +01:00
Hauke Mehrtens 2e101b5e66 ppc44x: fix build of crypto4xx_core.c
crypto4xx_probe() is in the __init section and referenced by code form
other sections, which causes a build error. Backport a patch from
mainline kernel to fix this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-25 15:19:20 +01:00
John Crispin 9998bc5ef7 lantiq: fix falcon build
The following commit changed the build templates name but forgot to
update the TARGET_DEVICES variable properly.

commit f9226158be (lantiq: rename EASY98000 to EASY98000NOR)

Signed-off-by: John Crispin <john@phrozen.org>
2016-12-25 09:52:11 +01:00
Hauke Mehrtens f9226158be lantiq: rename EASY98000 to EASY98000NOR
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-24 14:55:45 +01:00
Felix Fietkau 41b63b50d1 rb532: remove linux 4.1 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 12:02:11 +01:00
Florian Fainelli b69314ea99 rb532: Switch to kernel 4.4
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 12:02:10 +01:00
Florian Fainelli 002264d5b1 rb532: Backport fix to resolve oops during korina_restart
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 12:02:10 +01:00
Florian Fainelli 7a340a5cd0 rb532: Add support for kernel 4.4
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 12:02:10 +01:00
Florian Fainelli db553ffb34 rb532: Fix initramfs kernel images
The generic lzma-loader uses vmlinux.lzma as an input to compress so we
need to provide a lzma compressed version of the initramfs kernel.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 12:02:10 +01:00
Mathias Kresin ea9b71e5b1 lantiq: drop the FRITZ7360SL led-dsl alias
The power LED can not be used for indicating the xDSL line state and
the in system (boot) state at the same time in LEDE.  As soon as the
xDSL Line goes down, the power LED is switched off.

During xDSL handshake the power led would blink with the same or a
similar pattern as during boot.

Both might confuse users.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin 7dd42d610d lantiq: add FRITZ7360SL phy reset gpios
Due to a hardware bug of Atheros 8030 phys, the driver need to reset
the phys on link state change.

Use the correct compatible string for the at903x phys connected to
switch port 0 and 1.

Fix the pinmux of the gpio lines connected to the reset pin of the phys
and define the reset-pins to let the driver do the fixups.

Fixes FS#343

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin 9aa420b00e lantiq: fix DGN1000B boot status leds
The alias node should not be a child of the chosen node.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin 0cf581ca3a ramips: use new image build code for more devices
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin a75ce960ac ramips: use different board names for variants
Use different names for flash size related board variants, to make sure
that only images for the actual flash size are considered as valid by
the image validation code.

Remove the flash size suffix from the string returned by
ramips_board_detect() to ensure that existing scripts relying on the
former used boardname are still working.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin 29f5e643ad ramips: sort rt305x image file alphabetical
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin d2b1148e75 ramips: use D-Link DIR-600 B1 image for B2 version
Everything set for the B1 is identical to the values uses for the B2
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin d2b6bf1416 ramips: fix image validation errors
The name from the Device define will be used in the metadata. Due to
typos/different spelling, this name might not match the one exported in
/lib/ramips.sh.

Fix all name mismatches which were found by checking if the name used
in the metadata exists in /lib/ramips.sh.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin ae3ac76e56 ramips: use destinct 11AC NAS board name
Use a distinct board name even if the board is near to identical to
the WeVO W2914NS v2.

To make sure that a 11AC NAS image can not be installed on a
WeVO W2914NS v2, both board need to use different names.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Felix Fietkau a18488a0aa orion: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau 0d5ba94088 orion: enable SoC drivers in the kernel config
Clean up packaged modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau 49e81f9fe4 kirkwood: clean up profiles, move to image makefile
Adds support for per-device rootfs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau 9a1f441ac8 kirkwood: enable SoC drivers in the kernel config
Clean up packaged modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau 44447f6882 kirkwood: clean up FEATURES
Remove dt: it is implicitly enabled based on the kernel config
Remove tar.gz and jffs2_nand: Legacy build code has been removed,
NAND devices are only supported with UBI now.
Remove ubifs: deprecated, use squashfs images instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau 2eb1cc3dfc kirkwood: remove legacy image build code
This has been mostly non-functional for a while now

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau c9e4cf2299 kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code
Update the correspoding u-boot configs to stop relying on
kernel-in-rootfs, which was removed a while back

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Henryk Heisig 4f033b2da6 ramips: fix tplink image building fix sysupgrade firmware on MR200
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-12-24 06:52:12 +01:00
Henryk Heisig 3a6353d910 ramips: enablemodem: move /lib/ramips.sh to start()
Fix build error: /etc/init.d/enablemodem: line 2: /lib/ramips.sh: No such file or directory

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-12-24 06:51:59 +01:00
Jo-Philipp Wich 29cc927ef5 generic: ar8216: fix invalid bounds check imported from ChromeOS (FS#347)
The priv->vlan_id member is of size AR8X16_MAX_VLANS, not AR8X16_MAX_PORTS,
so check for the proper maximum value in order to avoid capping valid VLAN IDs
to 7 (AR8X16_MAX_PORTS - 1).

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-23 19:24:14 +01:00
Felix Fietkau d44c6ec1ce Revert "arm64: boot-wrapper: Add mirror"
This reverts commit ef258a0a41.
Similar to 43c09f2885, multiple git
mirrors are not supported

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 21:08:17 +01:00
Felix Fietkau c7c1cf5618 treewide: clean up and unify PKG_VERSION for git based downloads
Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:42:21 +01:00
Tedaz 1831e61699 x86/64: enable Hyper-V support in the x86_64 kernel config
Enabled Hyper-V network interface card driver, display adapter driver,
storage driver, keyboard driver, mouse driver and Hyper-V utility and
EFI boot support in the kernel for subtarget x86/64.
Convert the img file to vhd by Ubuntu qemu-img, rather than by the buildroot's
built-in qemu-img.

Tested on Windows Server 2008 r2 and 2012 r2 Gen1 and Gen2 VMs.

Signed-off-by: Tedaz <tedaz99999@hotmail.com>
2016-12-22 16:42:19 +01:00
Henryk Heisig c8043137bb ramips: Add support to TP-Link Archer MR200
CPU: MT7620N 580MHz
Flash: 8MB
RAM: 64MB
build-in modem 3G/4G
four ethernet port 10/100Mbps

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-12-22 15:03:30 +01:00
Vitaly Chekryzhev 190ee7d86b ramips: add support for ZyXEL Keenetic Omni / Omni II
Factory image can be installed via Zyxel WebUI.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2016-12-22 15:03:13 +01:00
Radek Dostál 3561d89ad6 ar71xx: RE450: enable building of TP-Link RE450
Signed-off-by: Radek Dostál <rd@radekdostal.com>
2016-12-22 14:50:06 +01:00
Tal Keren 9c475eca3e ar71xx: add support for TP-Link RE450
Add full support for TP-Link RE450.
The wireless SoC is similiar to Archer C7: QCA9558 + QCA9880 (pci).
The ethernet interface is AR8035, but the mdio is connected to the gpio and
the chipset builtin mdio bus isn't used, which is unique (and weird), so the
kernel gpio mdio module is used.
The two ethernet leds are connected to the GPIO, so they are both configured,
one to indicate link status and the other to indicate data transfer.

The generation of the image was added to the image Makefile.
The return value of tplink-safeloader is not ignored anymore (to fail on error)

The result factory image is flashable from the stock web ui.

Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: ar71xx: RE450: do not build RE450 for nand]
Signed-off-by: Radek Dostál <rd@radekdostal.com>
[hyniu@o2.pl: ar71xx: RE450: Renaming LED accordance with the standard]
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[jo@mein.io: squash fixes from Radek and Henryk into original commit]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-22 14:50:05 +01:00
Radek Dostál 236fc232bb ar71xx: sort items in 11-ath10k-caldata alphabetically
Requested-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Radek Dostál <rd@radekdostal.com>
2016-12-22 14:50:05 +01:00
Tal Keren 0d9d980ecd firmware-utils: kernel image generator for TP-Link RE450
The firmware image that is used in TP-Link RE450 (and some more devices from
the RE series) is tplink-safeloader.
In the kernel partition, the kernel is compressed in a regular tp-link
firmware that is just used for booting. Since it is only used for compressing
and booting, only four fields are filled in the header:
Vendor, version, kernel load address and kernel entry point.
mktplinkfw-kernel is a simpler version of mktpolinkfw that generate such
images. It also specifies the hardware id (as it is in the product info
section), so when doing a sysupgrade - the existing code will check for
hardware compatibility.

Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: add build target to .../image/tp-link.mk]
Signed-off-by: Radek Dostál <rd@radekdostal.com>
2016-12-22 14:50:05 +01:00
Matthias Schiffer 324bdf3ecc
ar71xx: remove redundant -j from TL-WR1043ND v4 kernel build command
mktplinkfw ignores -j in combined mode, the EOF marker is added by
tplink-safeloader.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-12-21 23:29:00 +01:00
Alexandru Ardelean 81a2f9d6f8 target/linux/x86/image: add explicit prefix to grub-mkimage command
In the latest version of grub-mkimage, the prefix option is mandatory.
Not supplying it fails with:
```
Prefix not specified (use the -p option).
```

In grub-2.02-beta2 a DEFAULT_DIRECTORY was defined
in `include/grub/osdep/hostfile_unix.h` as:
```
 #if defined (__NetBSD__)
 /* NetBSD uses /boot for its boot block.  */
 # define DEFAULT_DIRECTORY  "/"GRUB_DIR_NAME
 #else
 # define DEFAULT_DIRECTORY  "/"GRUB_BOOT_DIR_NAME"/"GRUB_DIR_NAME
 #endif
```

Where:
* GRUB_BOOT_DIR_NAME == boot
* GRUB_DIR_NAME == grub

This was used if the -p option was omitted.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-12-20 16:24:21 +01:00
Ludwig Thomeczek 1a4d07c2c5
ar71xx: add support for TP-LINK WR1043ND v4
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
2016-12-20 14:38:48 +01:00
Matthias Schiffer 0495181529
ar71xx: rename mktplinkfw-initramfs to more generic mktplinkfw-combined
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-12-20 14:38:48 +01:00
John Crispin c21af889bb brcm2708: unbreak the spidev build
a generic patch made this patch fail to apply cleanly leading to aborted builds

Signed-off-by: John Crispin <john@phrozen.org>
2016-12-20 13:47:57 +01:00