Commit Graph

8 Commits (b5b83706be5bad055033bd3cf6d4f50e2fe2f19c)

Author SHA1 Message Date
John Crispin cbfec477ce mpc85xx/tl-wdr4900: correct address of the gpio controller
since linux 3.19 the address of the gpio-controller changed

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 48794
2016-02-26 08:35:29 +00:00
Felix Fietkau 32dea5d2a9 mpc85xx: fix TL-WDR4900 mac address assignment to match original firmware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48645
2016-02-07 14:18:36 +00:00
Felix Fietkau 271a348cda mpc85xx: Add PTP node for TL-WD4900 in device tree
PTP requires at least one timer to be 1PPS so describe it.
For testing, load kernel module gianfar_ptp and use ptp4l
from linuxptp.

Copied from FSL P1010RDB reference design.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 48275
2016-01-17 11:16:52 +00:00
Felix Fietkau e2999a8e5f mpc85xx: fix up m25p80 device id (#21286)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47691
2015-12-02 17:35:37 +00:00
John Crispin 71db293eab mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1
This patch adds the RFKill GPIO control switch and enables another GPIO to
control power supply to USB Ports by emulating an LED GPIO for WDR4900v1.

Signed-off-by: Guo Wei Lim <alphasparc@gmail.com>

SVN-Revision: 46279
2015-07-09 06:56:45 +00:00
Felix Fietkau 7b85e8e316 mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig
Currently port 6 is shown as up 10MBit/half in LUCI and swconfig.
Reason is that all bits in the port 6 config are zero.
This means that also the aneg flag is not set and in this case
ar8216_read_port_link hardcodes the link to be up.

This is no real problem but a little annoying.
To fix this initialize port 6 with the aneg bit enabled.
This causes ar8216_read_port_link to evaluate the link status bit which is
always zero for port 6 as no PHY is connected to this port.
And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 45749
2015-05-25 21:15:37 +00:00
Imre Kaloz 3ee45e61fe mpc85xx: replace WDR4900 uci-defaults ethernet MAC address hack with DTS entry
This also changes the MAC address to one of the adresses actually used by the
stock firmware on one of the ethernet interfaces.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45599
2015-05-03 18:00:47 +00:00
Imre Kaloz b9fbf31fe7 mpc85xx: move newly created files from patch files to files directory
This will make these files much more maintainable.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45597
2015-05-03 17:58:45 +00:00