hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
31,531 Commits
4 Branches
8 Tags
169 MiB
Commit Graph

249 Commits (adbec3f1326210732cdfa3a456cee5fe669f540a)

Author SHA1 Message Date
Rafał Miłecki 9845d729a9 bcm53xx: build images for Asus devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45790
 2015-05-27 16:20:06 +00:00
Hauke Mehrtens 47eca7a1ca bcm53xx: add OHCI (USB 1.1) support 
There is also a OHCI controller, activate it for USB 1.1 support.

This should close #19601.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45716
 2015-05-23 14:54:44 +00:00
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14 
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
 2015-05-21 19:32:46 +00:00
Rafał Miłecki 63bb7c51db bcm53xx: add Asus RT-AC87U partitioning hacky workaround 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45694
 2015-05-17 12:10:38 +00:00
Rafał Miłecki 75b8e247e3 bcm53xx: try to fix network on Asus RT-AC87U 
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).

One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45692
 2015-05-16 17:14:25 +00:00
Rafał Miłecki ab83610563 bcm53xx: use backported Asus RT-AC87U DT patch 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45691
 2015-05-16 15:44:00 +00:00
Rafał Miłecki abed46aacc bcm53xx: enable RT-AC87U UART console 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 45690
 2015-05-16 11:45:52 +00:00
Rafał Miłecki 3dd9274332 bcm53xx: add support for SmartRG SR400ac 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45686
 2015-05-13 20:01:15 +00:00
Rafał Miłecki b4ecf19faa bcm53xx: replace DT patches with backports from stblinux 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45685
 2015-05-13 20:01:03 +00:00
Rafał Miłecki af019cad56 bcm53xx: use of_machine_is_compatible helper in b53 fix 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45684
 2015-05-13 14:34:23 +00:00
Rafał Miłecki afb98aea4d bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45683
 2015-05-13 13:12:57 +00:00
Rafał Miłecki 610ee0d85a bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45682
 2015-05-13 13:11:17 +00:00
Rafał Miłecki 2d3aaa2d2f bcm53xx: fix default network interface on Netgear R8000 
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45681
 2015-05-13 13:11:04 +00:00
Rafał Miłecki 45ec92fa30 bcm53xx: bgmac: add support for the 3rd core 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45680
 2015-05-13 13:11:00 +00:00
Rafał Miłecki d2e5e2bf54 bcm53xx: sync NVRAM and SPROM drivers with upstream version 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45678
 2015-05-13 08:30:45 +00:00
Rafał Miłecki 3a6cdac37c kernel: backport first bcma patches from 4.2 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45652
 2015-05-09 17:38:48 +00:00
Rafał Miłecki 33e597b241 bcm53xx: sort ports from NVRAM entries before matching them 
Some devices have unsorted ports which may lead to broken config.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45575
 2015-04-24 07:47:25 +00:00
Rafał Miłecki 866fe3895d bcm53xx: sysupgrade: check if new kernel fits partition size 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45547
 2015-04-21 11:21:34 +00:00
Rafał Miłecki 457d9caf4d bcm53xx: sysupgrade: improve NAND warnings 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45546
 2015-04-21 11:04:38 +00:00
Rafał Miłecki 5b9d70c888 bcm53xx: image: prepare for generating serial flash images 
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45545
 2015-04-21 08:42:41 +00:00
Rafał Miłecki a86e7330dc bcm53xx: sysupgrade: drop some debugging message 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45544
 2015-04-21 08:34:25 +00:00
Rafał Miłecki 688c1d74b9 bcm53xx: sysupgrade: allow flashing NAND devices without --force 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45543
 2015-04-21 08:32:59 +00:00
Rafał Miłecki d263c8e1a9 bcm53xx: sysupgrade: support flashing TRX with UBI image 
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45542
 2015-04-21 08:20:06 +00:00
Rafał Miłecki 92875dbd3d bcm53xx: append only 1 block (with erasing mark) to UBI 
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.

Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45541
 2015-04-21 08:20:00 +00:00
Rafał Miłecki ac6879caaa bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades 
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45540
 2015-04-21 08:19:53 +00:00
Felix Fietkau c73adc80a3 bcm53xx: add profiling support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45480
 2015-04-17 18:52:15 +00:00
Rafał Miłecki 9e03c36259 bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45473
 2015-04-17 06:03:00 +00:00
Felix Fietkau 582b20c4e2 kernel: accidentally committed a few patches in the wrong place, move them 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45468
 2015-04-16 20:43:11 +00:00
Felix Fietkau b860db2c63 bcm53xx: add power button for WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45467
 2015-04-16 20:09:55 +00:00
Felix Fietkau f6cbbe1332 bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45464
 2015-04-16 20:09:36 +00:00
Felix Fietkau d51420eedc bcm53xx: increate trx maxlen to prevent build failures with bigger images 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45461
 2015-04-16 20:09:15 +00:00
Felix Fietkau f8d499fd3f bcm53xx: fix WXR-1900DHP power led name and add usb led 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45460
 2015-04-16 20:09:08 +00:00
Felix Fietkau c64fdadea7 bcm53xx: make use of the new board detection layer 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45458
 2015-04-16 12:18:34 +00:00
Felix Fietkau 147e005fcf bcm53xx: add USB 2.0 power control for WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45451
 2015-04-15 16:06:20 +00:00
Felix Fietkau 83e31eb7e7 bcm53xx: add USB 2.0 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45450
 2015-04-15 16:06:14 +00:00
Rafał Miłecki 3edb55143d bcm53xx: add (disabled) support for upgrading kernel during sysupgrade 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45445
 2015-04-14 20:50:59 +00:00
Rafał Miłecki 3cb8bf44e6 otrx: change command line API to start with a mode 
This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45443
 2015-04-14 20:50:46 +00:00
Felix Fietkau 923bef1678 bcm53xx: refresh kernel patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45426
 2015-04-13 22:23:37 +00:00
Felix Fietkau 24e9f52106 bcm53xx: add support for the Buffalo WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45419
 2015-04-13 17:32:25 +00:00
Felix Fietkau 1e48a48915 bcm53xx: fix GPIO pins > 16 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45418
 2015-04-13 17:32:18 +00:00
Felix Fietkau 1f70f452cc bcm53xx: add missing l2 cache controller AUXCTL bit 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45416
 2015-04-13 17:32:05 +00:00
Felix Fietkau d24388da44 bcm53xx: add a comment about the gpio base patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45408
 2015-04-12 22:10:44 +00:00
Rafał Miłecki 77c75e6fa3 bcm53xx: try to handle Netgear R8000 VLANs config 
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45403
 2015-04-12 20:11:25 +00:00
Felix Fietkau 2dbe131a62 bcm53xx: fix bcma gpio chip base 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45399
 2015-04-12 17:22:04 +00:00
Rafał Miłecki 95ef64a779 bcm53xx: allow sysupgrade firmwares without UBI containing rootfs 
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45392
 2015-04-12 12:04:13 +00:00
Rafał Miłecki 24d40980b0 bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade 
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45391
 2015-04-12 11:46:16 +00:00
Rafał Miłecki a04b71d330 bcm53xx: rework vendor fw handling to don't duplicate upgrade calls 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45389
 2015-04-12 10:42:27 +00:00
Rafał Miłecki 503ccc502d bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation 
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45387
 2015-04-12 10:20:59 +00:00
Rafał Miłecki 9d6e04a4f1 bcm53xx: build image for ASUS RT-AC56U 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45353
 2015-04-10 09:58:00 +00:00
Rafał Miłecki 71fcbffc91 bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45352
 2015-04-10 09:42:48 +00:00