hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
24,697 Commits
4 Branches
8 Tags
169 MiB
Commit Graph

24697 Commits (a9de3a851a83d43f487f9ced2cf0326047aabc5a)

Author SHA1 Message Date
Felix Fietkau 4fc17e4d08 ar71xx: use uimage split for DIR-825B1 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37299
 2013-07-14 14:05:46 +00:00
Felix Fietkau c263993197 ar71xx: use uimage split for Embedded Wireless Dorin 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37298
 2013-07-14 14:05:42 +00:00
Felix Fietkau 083b0a06a3 ar71xx: use uimage split for Ubiquiti XM devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37297
 2013-07-14 14:05:39 +00:00
Felix Fietkau 6702955857 ar71xx: increase kernel size for wndr3700 based devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37296
 2013-07-14 14:05:35 +00:00
Felix Fietkau 25d910a78f ar71xx: use uimage split for WZR-HP-G300NH2 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37295
 2013-07-14 14:05:31 +00:00
Felix Fietkau 6bff456212 ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37294
 2013-07-14 14:05:27 +00:00
Felix Fietkau fbde376c53 ar71xx: use uimage split for WZR-HP-G300NH 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37293
 2013-07-14 14:05:23 +00:00
Felix Fietkau a7c5f6708b ar71xx: use uimage split for WZR-HP-G450H 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37292
 2013-07-14 14:05:19 +00:00
Felix Fietkau ab5e21a9a5 ar71xx: enable uimage split and use it for carambola2 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37291
 2013-07-14 14:05:16 +00:00
Felix Fietkau 8d5d96e833 ar71xx: remove linux 3.8 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37290
 2013-07-14 14:05:12 +00:00
Felix Fietkau d1238718c2 ar71xx: move the watchdog driver to the kernel 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37289
 2013-07-14 14:05:08 +00:00
Felix Fietkau 8cf868e1a6 ar71xx: set linux 3.10 as default 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37288
 2013-07-14 14:05:04 +00:00
Hauke Mehrtens a5c0ad6354 brcm47xx: add initial support for kernel 3.10 
SVN-Revision: 37287
 2013-07-14 13:44:45 +00:00
Hauke Mehrtens 3bc90a4d23 brcm47xx: fix switch handling 
This fixes some problems with the switch handling

 * It now send the messages again to indicate a button for failsafe mode should be pressed
 * it does not leak packages between wan and lan any more
 * the switch works again in normal mode

The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.

This should close #13869, #13868 and #13716

SVN-Revision: 37286
 2013-07-14 13:19:58 +00:00
Felix Fietkau 17bbc92882 kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37285
 2013-07-14 13:10:22 +00:00
Hauke Mehrtens ef0b9be95e brcm47xx: do not load the kernel modules needed for Ethernet manually 
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.

SVN-Revision: 37284
 2013-07-14 12:59:00 +00:00
Felix Fietkau 656d475043 kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37283
 2013-07-14 12:57:03 +00:00
Felix Fietkau b95bdc8ab5 kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37282
 2013-07-14 12:56:58 +00:00
Hauke Mehrtens e800436de3 brcm47xx: do not change nvram without user interaction 
SVN-Revision: 37281
 2013-07-14 12:56:42 +00:00
Hauke Mehrtens 9a5a262324 broadcom-diag: make it work with kernel 3.10 
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.

SVN-Revision: 37280
 2013-07-14 11:30:31 +00:00
Hauke Mehrtens c7370edf98 broadcom-diag: check the correct value for not null. 
This also fixes a compile warning.

SVN-Revision: 37279
 2013-07-14 11:28:37 +00:00
Hauke Mehrtens 63d818a219 broadcom-diag: reoder some parts. 
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.

SVN-Revision: 37278
 2013-07-14 11:26:35 +00:00
Felix Fietkau 3a4a74f861 busybox: disable features marked as broken (#13782) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37277
 2013-07-14 11:00:59 +00:00
Hauke Mehrtens da72edd7cd kernel: refresh patches for kernel 3.8.13 
SVN-Revision: 37276
 2013-07-13 22:45:56 +00:00
Hauke Mehrtens 06accca1d7 kernel: update to kernel 3.10.1 and refresh patches 
SVN-Revision: 37275
 2013-07-13 22:45:09 +00:00
Hauke Mehrtens e574f75d16 kernel: update to kernel 3.9.10 and refresh patches 
SVN-Revision: 37274
 2013-07-13 22:43:10 +00:00
Felix Fietkau 9b9c6facfc ar71xx: fix ar933x watchdog clock (#13866) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37273
 2013-07-13 22:29:53 +00:00
Hauke Mehrtens e041d370a7 brcm47xx: proc gets mounted without this patch 
SVN-Revision: 37272
 2013-07-13 21:42:19 +00:00
Hauke Mehrtens 8dabd7a26b brcm47xx: remove obsolete hotplug stuff 
SVN-Revision: 37271
 2013-07-13 20:38:33 +00:00
Felix Fietkau 299c2ceafa mac80211: tweak mac address allocation 
Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37269
 2013-07-13 11:39:48 +00:00
Hauke Mehrtens 9e9261a718 bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs 
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37268
 2013-07-12 13:46:27 +00:00
Felix Fietkau 92961e0917 mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37265
 2013-07-12 08:10:19 +00:00
Felix Fietkau f8543faec4 mac80211: merge a fix for PS-Poll handling, refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37264
 2013-07-12 07:59:59 +00:00
Felix Fietkau e389c2b410 mac80211: remove bogus module params from compat.ko 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37263
 2013-07-12 07:59:51 +00:00
John Crispin 39531131a9 ar71xx: add carambola2 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37260
 2013-07-11 21:16:53 +00:00
John Crispin 182866ecdc procd: update to latest git revision 
this fixes a regression in the watchdog init code

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37259
 2013-07-11 21:16:43 +00:00
John Crispin 93c4359512 lantiq: revert 36778 as it breaks irq assignment to pci devices 
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37258
 2013-07-11 21:16:34 +00:00
John Crispin 3c306f9d07 procd: make the log port default to 514 if none is specified 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37257
 2013-07-11 21:16:25 +00:00
Felix Fietkau bec39b26ad kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37256
 2013-07-11 20:56:30 +00:00
Felix Fietkau 4932368398 kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37255
 2013-07-11 20:56:27 +00:00
Felix Fietkau c38b7b3913 kernel: make libsas depend on x86 
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37254
 2013-07-11 20:56:22 +00:00
Felix Fietkau 19e3ec0570 kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37253
 2013-07-11 20:56:19 +00:00
Felix Fietkau f5ae93e941 kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37252
 2013-07-11 20:56:15 +00:00
John Crispin 2d854d022c ar71xx: set priority of ath79_wdt to 1 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37251
 2013-07-11 17:01:08 +00:00
John Crispin 585ab22c0f procd: update to latest git version 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37250
 2013-07-11 17:01:03 +00:00
John Crispin 6f1112a5e8 procd: add proto and trigger support to the /etc/init.d/log 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37249
 2013-07-11 17:00:59 +00:00
John Crispin 8eb56a88a4 procd: add a small script that handles config reloads until configd is ready 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37248
 2013-07-11 17:00:54 +00:00
John Crispin 67eb275f69 procd: the delete ubus call was passed the wrong field name for services 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37247
 2013-07-11 17:00:49 +00:00
John Crispin 3fcee6de2f ubox: upgrade to latest version 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37246
 2013-07-11 17:00:45 +00:00
John Crispin 8d546699c5 dropbear: register a config.change trigger 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37245
 2013-07-11 17:00:40 +00:00