9bdf6abb9d
use macros to generate SPI registers table and switches
...
SVN-Revision: 27246
2011-06-21 10:05:51 +00:00
ab74628c10
dev-spi.c checks for running CPU, not board code
...
SVN-Revision: 27236
2011-06-19 20:46:00 +00:00
4dd4cbeb43
fixup patches after r27234
...
SVN-Revision: 27235
2011-06-19 20:28:38 +00:00
7819b530da
remove accidental bcm6345 related patches
...
SVN-Revision: 27234
2011-06-19 20:16:59 +00:00
12db3df666
remove support for 2.6.37 and 2.6.38
...
SVN-Revision: 27233
2011-06-19 20:14:22 +00:00
6bb0a608dc
switch to 2.6.39
...
SVN-Revision: 27232
2011-06-19 20:12:45 +00:00
426dccd019
bcm63xx: Add support for Linux 3.0-rc3
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27192
2011-06-16 14:34:40 +00:00
016e8dee34
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27019
2011-05-27 09:54:52 +00:00
590c82cec1
bcm63xx: Add support for 2.6.38
...
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27018
2011-05-27 09:54:48 +00:00
68cb138154
fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
...
SVN-Revision: 27014
2011-05-26 13:53:00 +00:00
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
2011-05-26 13:52:56 +00:00
2785e3fc12
renumber board patches
...
SVN-Revision: 27012
2011-05-26 12:09:15 +00:00
16dfe8b4d1
add support for BT Voyager 2110 ( #8810 )
...
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959
2011-05-20 10:06:25 +00:00
6c8387fe15
add support for DSL-2640B rev B2
...
Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958
2011-05-20 10:06:22 +00:00
031ea08ef0
refresh patches
...
SVN-Revision: 26957
2011-05-20 10:06:18 +00:00
3e83f60a66
add support for D-Link DVA-G3810BN/TL
...
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956
2011-05-20 10:06:15 +00:00
f0a99c1692
add support for BT Voyager 2500 ( #9070 )
...
SVN-Revision: 26954
2011-05-20 10:06:07 +00:00
acf0ec224f
add support for USR9108 LEDs ( #9372 )
...
SVN-Revision: 26953
2011-05-20 10:06:04 +00:00
9c8a2d5961
bcm63xx: Add support for the T-Home Speedport W 303V
...
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
7d3b735854
bcm63xx: Update support for the DSL-274xB revision C
...
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
2011-05-11 13:33:50 +00:00
0fb1c2d537
bcm63xx: Accept any led with power in its name as power led
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
2011-05-11 13:33:45 +00:00
c6af9c23b7
bcm63xx: Decouple Board ID and image name for fixup
...
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
2011-05-11 13:33:41 +00:00
de02a2795b
fill maintainer infos for a couple of targets
...
SVN-Revision: 26836
2011-05-06 12:37:36 +00:00
fcb1557a3e
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
...
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
3dbb8c5088
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
1fcd26091b
brcm63xx: remove patches/configs for 2.6.35
...
SVN-Revision: 26709
2011-04-17 18:39:46 +00:00
8b18ce6807
Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch.
...
SVN-Revision: 26699
2011-04-17 01:15:47 +00:00
0d722113b9
Generate images for RTA1320_16M-based routers
...
SVN-Revision: 26681
2011-04-15 14:31:36 +00:00
f83c5938d2
bcm63xx: Move the OpenWrt rootfs length field
...
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26680
2011-04-15 12:18:25 +00:00
50c743e79e
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
33b864e899
Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices.
...
SVN-Revision: 26387
2011-03-31 06:16:23 +00:00
aa580d336b
bcm63xx: Really fix the flash driver in 2.6.37
...
Read back the actual rootfs length from the image tag.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25938
2011-03-07 16:55:01 +00:00
9dd1454044
fix patches after 2.6.37 update, patch from KanjiMonster
...
SVN-Revision: 25810
2011-03-01 16:02:38 +00:00
94a22b91fc
add support for 2.6.37, patches from KanjiMonster
...
SVN-Revision: 25629
2011-02-20 19:59:22 +00:00
8cc16aa14e
add support for HW553 bcm6358-based boards ( #8844 )
...
SVN-Revision: 25590
2011-02-19 15:44:06 +00:00
b7f8e1276d
add support for 'MAGIC' bcm6348-based board
...
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.
I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )
Thanks to KanjiMonster for the support on the IRC channel.
Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>
SVN-Revision: 25584
2011-02-19 12:44:27 +00:00
31709b2c76
update to 2.6.35.11
...
SVN-Revision: 25582
2011-02-19 12:44:16 +00:00
2d3ed6dc2d
fix T-Com Speedport W 500V default config
...
The device is called SPW500V, not SP500W.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25431
2011-02-09 13:09:02 +00:00
e75274de89
fix build of brcm-wl
...
The fallback needs to be exported for bcm63xx, too. Runtime tested with a
BCM4322 on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25420
2011-02-08 13:46:12 +00:00
bed53c93d6
give some credits to Tanguy Bouzeloc in the spi driver
...
SVN-Revision: 25133
2011-01-27 02:11:08 +00:00
c6d9ec5173
multiple SPI driver fixes
...
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 24849
2010-12-29 16:19:59 +00:00
dc9c1ac1f7
patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen).
...
SVN-Revision: 24843
2010-12-28 08:10:32 +00:00
5ee2a6c696
patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working.
...
SVN-Revision: 24842
2010-12-28 04:05:04 +00:00
093ebfe217
spi driver: remove bcm_rset usage
...
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced by
"bs->regs" field for all I/O operation.
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 24840
2010-12-28 00:24:50 +00:00
fc3a1d0ba3
Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24838
2010-12-26 04:18:13 +00:00
6ee5411686
base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24836
2010-12-26 04:18:04 +00:00
31f7259e3e
mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24834
2010-12-26 04:17:56 +00:00
44e22cbd49
Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
...
SVN-Revision: 24442
2010-12-10 18:59:58 +00:00
7224337d71
Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.
...
SVN-Revision: 24316
2010-12-08 00:40:31 +00:00
2a86dcc3d6
Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.
...
SVN-Revision: 24315
2010-12-08 00:40:28 +00:00
Florian Fainelli
Hauke Mehrtens
Felix Fietkau
Daniel Dickinson