1521cdda0f
remove function find_mtd_part() from /lib/functions.sh
...
Since all scripts using this function include /lib/functions/boot.sh -
where this function is defined as well - it can be dropped
from /lib/functions.sh. Also avoids further confusion about this
function being declared and defined in two different places.
SVN-Revision: 34641
2012-12-12 12:38:31 +00:00
3b0e77ee6b
Remove default sysctl-entry for IPv6 here (races)
...
SVN-Revision: 34417
2012-11-29 20:14:04 +00:00
38fced86ee
base-files: add support for the morse LED trigger
...
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).
Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34380
2012-11-25 17:20:49 +00:00
5ae2524d3a
base-files: use a natural mount syntax
...
Busybox built against musl-libc will choke on these otherwise, besides that
it is more natural to use the filesystem type, then options, then name, then
mountpoint.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34308
2012-11-23 20:02:02 +00:00
d3f22617a2
base-files: skip LEDs handled by rssileds in led init-script
...
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger.
This doesn't harm as the kernel will refuse this setting, but it outputs some
ugly log-lines:
Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW
Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument
...
In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33717
2012-10-11 06:45:02 +00:00
c5e5e70ab0
it's time to break the barriers
...
SVN-Revision: 33666
2012-10-08 13:12:37 +00:00
c7c649126f
base-files: remove obsolete entries from sysctl.conf ( #12236 )
...
SVN-Revision: 33532
2012-09-24 15:24:01 +00:00
78f4cf3d70
base-files: release an attached loop device on umounting
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 33477
2012-09-19 15:13:44 +00:00
2165240c32
base-files: make file compare silent in migrate-sysctl
...
SVN-Revision: 33449
2012-09-17 18:36:51 +00:00
0fd1fb6252
base-files: add uci-defaults script to migrate sysctl.conf ( #12196 )
...
SVN-Revision: 33448
2012-09-17 17:15:56 +00:00
dac5ed38b6
base-files: remove route enabled check in lib/functions/network.sh after netifd bump
...
SVN-Revision: 33391
2012-09-13 08:47:10 +00:00
ca857b7a50
base-files: uci-defaults for rssileds
...
Adds capability to add uci-defaults defining RSSI LEDs
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33164
2012-08-13 14:01:37 +00:00
70aaa116eb
base-files: provide a sysupgrade -r (--restore-backup) option as convenience wrapper for tar -C / -x(v)zf
...
SVN-Revision: 33147
2012-08-12 13:20:27 +00:00
fb9023bb8a
move LIB_SUFFIX from base-files to rules.mk
...
Some packages are going to need fixups based on LIB_SUFFIX
SVN-Revision: 33080
2012-08-10 14:15:06 +00:00
17dc1d5c44
base-files: fix option parsing of -F/--force parameter
...
SVN-Revision: 33075
2012-08-09 18:30:47 +00:00
31e46b4293
base-files: check for ldd presence and executability ( #11991 )
...
SVN-Revision: 33057
2012-08-08 15:37:34 +00:00
6afd1725f1
base-files: fix detection of standalone ldd
...
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 32891
2012-07-27 15:35:00 +00:00
9ab1df3f48
base-files: Modernize hotplug2 rules ( #11368 )
...
SVN-Revision: 32711
2012-07-14 19:59:44 +00:00
ff3161a6c4
base-files: ensure that /sys is available during sysupgrade, some essential services like om-watchdog need it
...
SVN-Revision: 32587
2012-07-03 15:43:43 +00:00
b2e5c5f82e
base-files: implement network_get_dnsserver() and network_get_dnssearch() in /lib/functions/network.sh
...
SVN-Revision: 32531
2012-06-29 19:04:11 +00:00
e654014352
base-files: only consider enabled default routes when finding the wan iface ( #11774 )
...
SVN-Revision: 32525
2012-06-29 11:58:35 +00:00
6c2a295245
base-files: enable TCP timestamps, enable sack/dsack. (patch by Dave Täht)
...
A year of testing in the cerowrt project shows not using timestamps
to be a very bad idea in nearly any TCP at speeds above a few Mbit.
Lastly sack/dsack help on recovery from larger amounts of packet
loss.
SVN-Revision: 32513
2012-06-27 22:32:44 +00:00
f2dde4f5ba
base-files: allow wireless ifaces to be part of multiple networks
...
SVN-Revision: 32503
2012-06-26 15:25:33 +00:00
3143f03568
toolchain: move eglibc-files from base-files to toolchain, it is packaged as part of the libc package
...
SVN-Revision: 32467
2012-06-20 13:45:01 +00:00
57a7257569
base-files: implement network_get_gateway(), network_get_gateway6(), network_find_wan() and network_find_wan6() in /lib/functions/network.sh
...
SVN-Revision: 32397
2012-06-17 11:50:50 +00:00
bfe966574f
base-files: enable shell tracing in initscripts when INIT_TRACE is set
...
SVN-Revision: 32340
2012-06-13 17:10:41 +00:00
9a1d6f0678
base-files: override Build/Compile/Default instead of Build/Compile ( fixes #11667 )
...
SVN-Revision: 32339
2012-06-13 16:25:29 +00:00
07826e391d
base-files: move all toolchain packages to a separate package directory 'toolchain'
...
SVN-Revision: 32169
2012-06-10 20:27:30 +00:00
9869b4da3c
base-files: implement network_defer_device() and network_ready_device() wrappers for upcoming netifd iface deferring support
...
SVN-Revision: 32106
2012-06-07 14:55:26 +00:00
6cdf25289c
base-files: add permission exceptions, do not clobber shadow permissions - based on patch by Mark Mentovai <mark@moxienet.com>
...
SVN-Revision: 32073
2012-06-05 18:02:00 +00:00
5e84df6bac
base-files: ship a static initial shadow db instead of creating it from passwd with sed, this fixes registering of users at compile time
...
SVN-Revision: 32064
2012-06-05 17:48:41 +00:00
a044a43d06
base-files: make user_add() populate the shadow db as well
...
SVN-Revision: 32063
2012-06-05 17:40:32 +00:00
9ae901445b
/etc/functions.sh => /lib/functions.sh
...
SVN-Revision: 32062
2012-06-05 16:04:23 +00:00
eca7502dfd
base-files: add LED specific functions to /lib/functions/uci-defaults
...
SVN-Revision: 31991
2012-05-29 16:39:16 +00:00
8a9e94b077
base-files: remove base-files-network, netifd is the only supported option now
...
SVN-Revision: 31980
2012-05-29 12:59:03 +00:00
c11151bc70
base-files: add network_is_up()
...
SVN-Revision: 31978
2012-05-29 02:03:25 +00:00
bf52cbf108
base-files: let network_get_device() return the l3 interface, introduce network_get_physdev() to obtain the underlying iface (if applicable)
...
SVN-Revision: 31960
2012-05-29 00:20:16 +00:00
8ef9450b37
base-files: add network_get_device() to network.sh
...
SVN-Revision: 31937
2012-05-28 03:24:56 +00:00
f1d04190c5
base-files: introduce /lib/functions/network.sh This file will contain common procedures to deal with network interfaces. Initially provides network_get_ipaddr(), network_get_ipaddr6(), network_get_subnet() and network_get_subnet6() to determine the primary IP addresses or subnets of a given logical interface.
...
SVN-Revision: 31935
2012-05-28 03:15:02 +00:00
166db84309
base-files: kill ubusd and udhcpc on sysupgrade as well
...
SVN-Revision: 31852
2012-05-23 21:54:12 +00:00
5d6628a88c
base-files: allow sysupgrade to kill netifd, fixes pppd shutdown on upgrade
...
SVN-Revision: 31851
2012-05-23 21:49:31 +00:00
6aec1d72c2
package/base-files: copy /lib/functions.sh to the ramfs on sysupgrade
...
SVN-Revision: 31842
2012-05-23 21:05:20 +00:00
5eed1d8f6b
enable netifd by default and add its config variable to PKG_CONFIG_DEPENDS in a few relevant places
...
SVN-Revision: 31730
2012-05-14 23:33:35 +00:00
80650c9475
base-files: wait for wifi modules to settle
...
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.
This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.
SVN-Revision: 31639
2012-05-06 21:25:42 +00:00
232b7aa65b
remove special treatment when using glibc - support got dropped
...
SVN-Revision: 31504
2012-04-28 22:24:16 +00:00
334fd4199b
purge support for glibc - use eglibc instead!
...
for reference: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg13425.html
SVN-Revision: 31503
2012-04-28 22:24:12 +00:00
129afe12b7
base-files: fix typo in 05_firstboot_skip script ( #11359 )
...
SVN-Revision: 31492
2012-04-27 16:49:16 +00:00
3678ba60ca
base-files: rename internal variables in config_foreach to make namespace conflicts more unlikely
...
SVN-Revision: 31431
2012-04-21 20:34:45 +00:00
3c4165a305
enable ntpd server for busybox
...
hi
Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1, ntpd will answer with the time of the router)
I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option? Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
SVN-Revision: 31374
2012-04-20 15:05:38 +00:00
b4312a8ba1
base-files: reformat banner to better work with varying version string lengths, do not set image options if menu is disabled ( #11280 )
...
SVN-Revision: 31289
2012-04-15 15:21:55 +00:00
d8540259ca
base-file: cleanup white space in Kconfig source
...
SVN-Revision: 31267
2012-04-12 23:01:39 +00:00
a43ae30e1b
include, base-files, opkg: introduce version configuration to override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner
...
The available placeholders are:
%D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt"
%d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt")
%N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment")
%n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment")
%V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262")
%v .. Like %V, but all characters made lowercase and spaces substituted with "_"
%C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge"
%c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge")
%U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages "
%R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c")
%T .. Replace with the current target (e.g. "ar71xx")
%S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le")
SVN-Revision: 31262
2012-04-12 17:31:16 +00:00
3c3941f109
base-files: remove network preconfig, it collides with ar71xx network firstboot uci-defaults To supply custom network settings, it is better to embed a complete network config file using the files/ overlay, the old image lan preconfig options are also very limited in scope and actually collide with sysupgrade and firstboot hardware detection on at least ar71xx and possibly other targets, therfore drop this facility.
...
SVN-Revision: 31258
2012-04-12 09:43:44 +00:00
6f46704743
base-files: split service related functions off to /lib/functions/service.sh
...
SVN-Revision: 31042
2012-03-20 14:29:50 +00:00
5fdd1f4bd7
Add munin to /etc/services
...
The muninlite postinst fails to add munin to /etc/services.
This patch removes this broken postinst and add an entry for munin in
/etc/services. This should have been done when the rest of the
/etc/services postinsts were being removed (changesets 26142-26149).
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 30982
2012-03-18 19:41:57 +00:00
5744d736f2
base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well
...
SVN-Revision: 30916
2012-03-13 09:18:30 +00:00
086cae30ce
base-files: enable conntrack accounting in sysctl. It used to be a compile time option which got deprecated
...
SVN-Revision: 30805
2012-03-04 14:53:17 +00:00
6c61d7cbf1
base-files: remove trailing whitespaces from lib/functions/boot.sh
...
SVN-Revision: 30776
2012-03-02 11:17:30 +00:00
8ae051799a
base-files: remove trailing whitespaces from lib/functions.sh
...
SVN-Revision: 30775
2012-03-02 11:17:29 +00:00
6b9bf71881
base-files: add a uci-defaults script which will migrate the root password to /etc/shadow if needed
...
SVN-Revision: 29865
2012-01-22 22:25:42 +00:00
a963a80a38
base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this
...
SVN-Revision: 29862
2012-01-22 21:14:22 +00:00
9fd3886365
base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
...
SVN-Revision: 29806
2012-01-19 15:37:47 +00:00
4e88bcfb00
base-files: implement a --force option for sysupgrade to override image checks, useful to upgrade old ar71xx installations to current trunk ones
...
SVN-Revision: 29688
2012-01-08 15:30:37 +00:00
ff89832fdb
package/base-files: add support for the switch LED trigger
...
SVN-Revision: 29629
2011-12-31 15:02:35 +00:00
3f85c52a3a
package/base-files: use case statement in led init script
...
SVN-Revision: 29628
2011-12-31 15:02:32 +00:00
1c6821b42e
base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.
...
SVN-Revision: 29587
2011-12-20 17:25:15 +00:00
561f4d2840
base-files: add lib/functions/uci-defaults.sh
...
SVN-Revision: 29384
2011-12-01 22:48:46 +00:00
d46e17548b
base-files: kill remaining processes after running user hooks ( #10461 )
...
SVN-Revision: 29256
2011-11-19 16:50:25 +00:00
010e58d209
base-files: another empty password check fix ( #10440 )
...
SVN-Revision: 29208
2011-11-17 09:40:06 +00:00
33443d2a8c
base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime
...
SVN-Revision: 29204
2011-11-17 01:18:22 +00:00
6d80ce78f1
base-files: rewrite killing of nonessential services to not rely on top, use the proc filesystem only
...
SVN-Revision: 29187
2011-11-16 15:01:18 +00:00
8b20bfafdf
base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly. Solves broken key based dropbear login with empty password after r28935.
...
SVN-Revision: 29130
2011-11-14 19:02:01 +00:00
b49aed1520
package/base-files: enhance service functions
...
* allow matching process by name (useful for processes changing it)
* check if first argument is executable
* fix function name used in error messages
SVN-Revision: 28991
2011-11-12 13:53:15 +00:00
20ff304ed9
base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again
...
SVN-Revision: 28943
2011-11-11 13:25:31 +00:00
28039aea90
nuke another 2.4 skeleton
...
SVN-Revision: 28937
2011-11-10 13:39:06 +00:00
7944b6fa32
enable and use shadow passwords by default
...
SVN-Revision: 28936
2011-11-10 12:55:01 +00:00
55ac529951
the empty root password should be empty ;)
...
SVN-Revision: 28935
2011-11-10 12:47:50 +00:00
be49daffc8
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
f371d516bf
package/base-files: /lib/functions.sh: add {group,user}_{add,exists} functions
...
SVN-Revision: 28871
2011-11-09 00:23:58 +00:00
62a2827ea7
package/base-files: /lib/functions.sh: let service_stop exit early if no matching process to stop where found
...
SVN-Revision: 28870
2011-11-08 23:35:13 +00:00
b7b56df707
package/base-files: enhance & cleanup service wrappers
...
* add service_check function for checking if a process is alive
* add service_signal for sending arbitrary signals to a process
* change service_stop to send a TERM signal first, wait for the process to die and send a KILL signal if it doen't
* have service_kill print a warning on STDERR stating it has been deprecated
SVN-Revision: 28865
2011-11-08 22:47:49 +00:00
d0659ce37e
package/base-files: move service* functions from /etc/rc.common to /lib/functions.sh
...
SVN-Revision: 28864
2011-11-08 22:47:41 +00:00
7e3b6aa1f1
base-files: do not kill udhcpc on sysupgrade, it will tear down the interface if terminated
...
SVN-Revision: 28863
2011-11-08 19:14:55 +00:00
daca6a6a97
base-files: do not assume that "top" is busybox' top, but try to call the applet explicitely
...
SVN-Revision: 28862
2011-11-08 18:48:38 +00:00
a73fffe857
base-files: properly handle wifi ifaces with no network attached, useful for unmanaged interfaces like used for batman or monitoring
...
SVN-Revision: 28860
2011-11-08 14:42:58 +00:00
b6aef59ea8
package/base-files: move /etc/functions.sh to /lib/functions.sh
...
SVN-Revision: 28857
2011-11-08 14:14:29 +00:00
93886bc776
package/base-files: use new service wrapper
...
SVN-Revision: 28835
2011-11-07 22:58:34 +00:00
10a03275bf
package/base-files: /etc/rc.common: add service wrapper around start-stop-daemon
...
SVN-Revision: 28834
2011-11-07 22:58:27 +00:00
8413e90418
package/base-files: /etc/passwd: fix uid number for user 'daemon' (conflicting with user 'nobody')
...
SVN-Revision: 28799
2011-11-07 11:02:55 +00:00
248ab4ac2f
base-files: process platform hotplug calls in the early launch of hotplug2 to avoid having crda calls get stuck at boot time ( fixes #10350 , #10354 )
...
SVN-Revision: 28768
2011-11-05 17:16:01 +00:00
dab5ebaa76
netifd: ensure that a bridge gets created before hostapd needs it, hostapd must not attempt to create the bridge by itself
...
SVN-Revision: 28745
2011-11-04 01:05:12 +00:00
44ba13b578
base-files: load modules early, run wifi detect afterwards and only then process uci defaults
...
this allows uci-defaults scripts to override wifi settings
SVN-Revision: 28733
2011-11-03 20:02:25 +00:00
e3daeabda3
base-files: add some more protected services to sysupgrade kill blacklist
...
SVN-Revision: 28732
2011-11-03 19:25:25 +00:00
ef6d7a7e33
base-files: fix typo
...
SVN-Revision: 28681
2011-10-30 15:48:14 +00:00
52e93e54bc
base-files: sysupgrade: kill all but essential processes before starting the update
...
SVN-Revision: 28626
2011-10-27 16:52:31 +00:00
4cc48089c7
base-files/sysupgrade: add more busybox applet symlinks to ramdisk
...
Adds symlinks for printf and wc to make life happier in the sysupgrade ramdisk.
Also make code more readable by escaping that overly long line.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28616
2011-10-27 07:54:49 +00:00
272d95f0f1
base-files: remove rdate integration, add busybox ntpd init script and server list in /etc/config/system The rdate applet proved to be too unreliable to obtain the current time on boot: - public time servers are rare and often unreachable or overloaded - rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions - the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations - the time protocol as specified in RFC 868 is considered obsolete This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly. The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or by clearing the timeserver list in /etc/config/system.
...
SVN-Revision: 28612
2011-10-27 00:21:53 +00:00
55aeabae10
add an initial (experimental) version of netifd, disabled by default
...
SVN-Revision: 28499
2011-10-21 01:47:49 +00:00
c2b5767572
base-files: move network related scripts to a separate package to make the transition to netifd easier
...
SVN-Revision: 28495
2011-10-20 15:01:06 +00:00
59c13202e0
base-files: introduce "igmp_snooping" option to toggle IGMP snooping on bridge interfaces
...
SVN-Revision: 28412
2011-10-11 13:43:08 +00:00
bfbbe5893f
base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
...
SVN-Revision: 28306
2011-09-26 02:28:04 +00:00
4246c6a6b5
base-files: apply network interface settings such as macaddr, mtu and txqueuelen in prepare_interface instead of setup_interface. setting the mtu after the interface is up is unreliable on some drivers such as gianfar
...
SVN-Revision: 28297
2011-09-24 20:34:17 +00:00
41838f4585
base-files: make ip matching in dns add/remove functions more explicit, avoids overmatching pairs like 1.2.3.35 and 1.2.3.3
...
SVN-Revision: 28291
2011-09-23 08:35:50 +00:00
98372a8eb5
base-files: Fix IPv6 address and route adding on aliases with no IPv4 address configured
...
SVN-Revision: 28241
2011-09-14 13:37:44 +00:00
200fd7bce1
Revert "[package] base-files: Add support for assigning multiple IPv6 addresses on an interface"
...
Multiple IPv6 addresses should be handled with alias sections
SVN-Revision: 28240
2011-09-14 13:37:40 +00:00
718c8ab940
base-files: Add support for assigning multiple IPv6 addresses on an interface
...
SVN-Revision: 28222
2011-09-12 21:07:00 +00:00
dea36724a4
base-files: remove an old network tunable tweak which is messing up network stack performance on modern systems
...
SVN-Revision: 28126
2011-08-29 23:34:11 +00:00
aab33e2e9a
base-files: fix arp() procedure to properly detect /usr/bin/arp
...
SVN-Revision: 27965
2011-08-12 14:34:39 +00:00
8ff7756e82
base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined
...
SVN-Revision: 27797
2011-07-27 09:02:10 +00:00
94c728dc39
base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
...
SVN-Revision: 27776
2011-07-25 22:19:55 +00:00
365f76551a
base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly).
...
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763 .
SVN-Revision: 27720
2011-07-22 00:21:20 +00:00
0de28706ca
base-files: implement a generic mechanism to map per-interface sysctls to uci. - option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz - option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan. Fixes ticket #8699 .
...
SVN-Revision: 27653
2011-07-17 17:10:30 +00:00
1e34c02e3e
base-files: add -h and --help options to sysupgrade ( #9728 )
...
SVN-Revision: 27630
2011-07-17 09:27:14 +00:00
e0e6d1029e
base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars ( #9711 )
...
SVN-Revision: 27616
2011-07-15 14:57:44 +00:00
1f69f4cf64
base-files: preinit: Fixed sourcing of diag.sh in /etc/preinit. This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit
...
SVN-Revision: 27501
2011-07-07 02:52:02 +00:00
32731a72c2
base-files: pass conloglevel to syslogd ( #9463 , #9647 )
...
SVN-Revision: 27400
2011-07-03 15:11:58 +00:00
0a7a73261a
base-files: do not use the relinked libgcc, fixes c++ exception handling issues ( #9185 )
...
SVN-Revision: 27347
2011-07-02 06:50:15 +00:00
28fbd7470d
add gfortran compiler support ( #9600 , patch from Xiangfu Liu via Qi hardware)
...
SVN-Revision: 27262
2011-06-23 11:46:24 +00:00
344445715a
base-files: assume a default ipv6 prefix size of /64, thats what the majority of users mean when they just specify an ip address
...
SVN-Revision: 27147
2011-06-09 12:36:30 +00:00
fd8ec24187
base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
...
SVN-Revision: 27145
2011-06-09 12:25:48 +00:00
97ee10d691
base-files: fix error reporting for unsupported protocols on virtual interfaces
...
SVN-Revision: 27132
2011-06-07 23:25:43 +00:00
9a227d88dd
base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
...
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
SVN-Revision: 27127
2011-06-07 17:00:43 +00:00
60f66ded72
base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration
...
SVN-Revision: 26990
2011-05-24 09:31:37 +00:00
9b8a5e604a
base-files: mark /etc/crontabs/ as config directory
...
SVN-Revision: 26986
2011-05-24 09:27:23 +00:00
ed8f726dab
ipcalc.sh CIDR notation Hi,
...
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
SVN-Revision: 26930
2011-05-18 09:50:06 +00:00
ba1c1e9016
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others ( #9352 )
...
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
3b1b49a49b
base-files: fix a typo in etc/banner
...
SVN-Revision: 26841
2011-05-07 09:23:33 +00:00
ff4203b9bd
base-files: cleanup permissions of device files in common hotplug rules ( #9211 )
...
SVN-Revision: 26808
2011-05-03 19:37:59 +00:00
144bee2090
base-files: fix stale space in eglibc library install section ( #9270 )
...
SVN-Revision: 26720
2011-04-19 13:18:39 +00:00
2f6361832e
base-files: return success on lib-copying with external toolchain when using an external toolchain the base-files package copies libc, libgcc and others from the library directory.
...
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
2011-04-12 20:37:43 +00:00
980190367c
base-files: Use -h instead of deprecated -L for symlink check
...
SVN-Revision: 26485
2011-04-05 15:09:43 +00:00
48465d3d63
base-files: fix minor problem in init.d/boot
...
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
SVN-Revision: 26483
2011-04-05 15:09:32 +00:00
d5542b4f59
block-mount base-files: Added additional check to pi_include to ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt.
...
SVN-Revision: 26479
2011-04-05 12:12:57 +00:00
e4e63b9c1b
base-files: bridge config, avoid having a random ipv6 ll address
...
So far, we are setting the bridge interface up before having added any
bridge interface ports. This results in the bridge assigning a random
mac address to its bridge interface and therefore IPv6 assigning a
matching link local address to the bridge interface as soon as the
bridge interface is up. After adding the first bridge port interface,
the bridge's mac address is reset correctly, however the IPv6 link
local address stays the same.
This commit ensures that we are at least having the IPv6 link local
address of the first interface added to the bridge instead of a random
one.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
SVN-Revision: 26426
2011-04-03 01:23:45 +00:00
fe8b9d5232
base-files: properly handle vlans on top of wireless interfaces
...
SVN-Revision: 26230
2011-03-18 18:24:51 +00:00
a3b9971d84
base-files: overlayfs whiteouts depend on a specific xattr entry, which does not get preserved by the tmpfs->overlay copy. work around this by cleaning all copied "(overlay-whiteout)" symlinks after the switch to jffs2
...
SVN-Revision: 26208
2011-03-17 19:09:43 +00:00
66bcd1d049
base-files: add initial support for mounting overlayfs
...
SVN-Revision: 26207
2011-03-17 19:09:39 +00:00
629e73938e
base-files: update sysctl.conf for modern kernels
...
SVN-Revision: 26204
2011-03-17 15:35:41 +00:00
1b66204ccd
base-files: Autodetect newly added wireless hardware
...
SVN-Revision: 26166
2011-03-15 00:44:15 +00:00
4bcca969dc
base-files: link libpthread against libc
...
SVN-Revision: 26161
2011-03-14 19:27:45 +00:00
71e83bd2e1
base-files: add a default /etc/services files
...
SVN-Revision: 26142
2011-03-13 19:47:42 +00:00
c33f2efbb2
base-files: add users ftp (for ftp servers), network (network related daemons such as tor, quagga, ...)
...
SVN-Revision: 26138
2011-03-13 19:10:28 +00:00
f5c130cfda
base-files: add an ftp group as well
...
SVN-Revision: 26136
2011-03-13 19:04:32 +00:00
554cbe7f18
base-files: add a few default groups to /etc/group so that we can get rid of a few postinst scripts
...
SVN-Revision: 26133
2011-03-13 18:56:34 +00:00
e8491ab2a5
base-files: make library relinking uclibc specific and fix libpthread installation for the non-relinked variant
...
SVN-Revision: 26003
2011-03-10 12:27:46 +00:00
32d8fac477
base-files: only relink libraries if the linaro toolchain is selected
...
SVN-Revision: 25983
2011-03-09 20:36:29 +00:00
e52b720870
gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically
...
SVN-Revision: 25952
2011-03-08 13:10:11 +00:00
357018e7e5
base-files: the relinked libpthread needs to be linked against libdl, otherwise calls to dlopen() fail ( fixes #8978 )
...
SVN-Revision: 25950
2011-03-08 12:48:36 +00:00
0b9cfab2a2
base-files: fix Build/Compile override handling, fixes ar7 compile
...
SVN-Revision: 25911
2011-03-06 22:36:42 +00:00
4e155b5283
base-files: do not build or use libgcc on m68k and avr32
...
SVN-Revision: 25852
2011-03-03 14:50:00 +00:00
1cc0bcfffc
base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs
...
SVN-Revision: 25800
2011-03-01 05:40:38 +00:00
73468de8d1
base-files: fix sysctl handling, do not react on fake ifaces in route hotplug handler
...
SVN-Revision: 25713
2011-02-25 22:44:37 +00:00
e6100a161b
boot.sh: Tabs are used for indent. Also use tabs in jffs2_ready()
...
SVN-Revision: 25635
2011-02-20 22:40:47 +00:00
16a300ea66
base-files: Add "-o noatime" to mount wrapper
...
noatime is cheaper than default relatime.
SVN-Revision: 25634
2011-02-20 22:39:08 +00:00
3a12229c1d
Fix whitespace
...
SVN-Revision: 25632
2011-02-20 21:25:45 +00:00
090c042089
base-files: Add /etc/nsswitch.conf to targets running glibc/eglibc, otherwise name resolution fails
...
SVN-Revision: 25568
2011-02-18 10:37:26 +00:00
e5e6dfe384
base-files: librt should depend on libpthread, not the other way around
...
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt
depends on libpthread.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25548
2011-02-16 02:42:24 +00:00
9f7f8110e7
base-files: remove a stale reference to /usr/lib/common.awk (thx, swalker)
...
SVN-Revision: 25528
2011-02-13 19:06:20 +00:00
e4589a2e5f
it's time for some attitude adjustment ;)
...
SVN-Revision: 25514
2011-02-13 11:20:09 +00:00
c672eeffc9
remove the shared object stubs of libnsl and libresolv - let the compiler use the static variants instead
...
SVN-Revision: 25511
2011-02-13 03:26:10 +00:00
803e9ceb90
base-files: /usr/lib/common.awk is only used by /bin/ipcalc.sh, move the code there
...
SVN-Revision: 25495
2011-02-13 01:44:57 +00:00
74ab5be3d7
base-files: remove ptbtime3 rdate server, its dead
...
SVN-Revision: 25479
2011-02-12 17:54:01 +00:00
8b1b99ba73
base-files: update rdate server list
...
SVN-Revision: 25478
2011-02-12 17:46:36 +00:00
ee3a4c2ee9
base-file: cleanup ipv6 enabling in unbridge
...
SVN-Revision: 25473
2011-02-12 16:14:15 +00:00
875ff44592
base-files: - properly disable IPv6 on bridge ports - introduce accept_ra option, defaults to true for dhcp interfaces, false for others - introduce send_rs option, defaults to true for static interfaces, false for others
...
SVN-Revision: 25454
2011-02-11 00:39:11 +00:00
4e34fc521c
base-files: derive lease_acquired dhcp state var from /proc/uptime
...
SVN-Revision: 25452
2011-02-10 20:05:05 +00:00
d063af3fcf
base-files: Add include for target specific hotplug rules
...
SVN-Revision: 25415
2011-02-07 22:28:09 +00:00
99c66237f0
hotplug2 rules: Run /etc/hotplug.d/firmware/ scripts (if any) on firmware load events
...
SVN-Revision: 25383
2011-02-06 14:35:07 +00:00
b33ce3109d
base-files: remove remaining conffiles reference to /etc/banner
...
SVN-Revision: 25368
2011-02-04 23:05:12 +00:00
3d82109add
base-files: don't stop hotplug events for ppp interfaces, similar fix like the earlier one for tun/tap interfaces
...
SVN-Revision: 25355
2011-02-03 22:43:11 +00:00
79b22b246b
base-files: make the skipping of ppp interfaces in 10-net hotplug more explicit, this allows users to rely on hotplug events for ppp0 .. ppp9 interfaces spawned by other programs
...
SVN-Revision: 25354
2011-02-03 22:34:30 +00:00
bd8a1549eb
base-files: Fix alsa raw audio device hotplug rule
...
SVN-Revision: 25301
2011-02-02 01:23:34 +00:00
824331a594
hotplug2: Use stricter matching for rule regular expressions
...
SVN-Revision: 25282
2011-02-01 16:37:53 +00:00
3a3d95b191
base-files: Remove deprecated hotplug2 commands, update old commands to new
...
SVN-Revision: 25268
2011-01-31 22:29:31 +00:00
a0b2eba08c
base-files: fix a typo in processing of additional dhcp request opts
...
SVN-Revision: 25239
2011-01-29 17:06:07 +00:00
a8edd9d50e
base-files: fix handling of dhcp "reqopts" option
...
SVN-Revision: 25237
2011-01-29 13:45:16 +00:00
d7fe921089
base-files: support port_state in led config ( #6763 )
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
SVN-Revision: 25172
2011-01-27 21:49:46 +00:00
25feec0c9c
package/base-files: add get_magic_long() to common upgrade script
...
Patch-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25117
2011-01-26 20:35:37 +00:00
f93b6cb844
base-files: Fix typo in option name for disabling failsafe announcment Thanks to Andrey Zholos for this patch
...
SVN-Revision: 25040
2011-01-18 14:46:25 +00:00
3b6851aa82
base-files: implement "reqopts" parameter for dhcp interfaces to specify additional dhcp options to request
...
SVN-Revision: 24780
2010-12-22 07:20:24 +00:00
3bd7985a0b
base-files: the busybox update to v1.15.3 completely broke udhcpc route option handling, repair default.script to work with the new format ( #6435 )
...
SVN-Revision: 24778
2010-12-22 07:07:15 +00:00
deb9661785
Âbase-files: don't mark /etc/banner as conffile
...
SVN-Revision: 24742
2010-12-20 19:51:05 +00:00
63c786dde7
base-files: add support for the usbdev LED trigger
...
SVN-Revision: 24647
2010-12-17 17:10:14 +00:00
5a351509aa
base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
...
SVN-Revision: 24540
2010-12-13 08:01:21 +00:00
ebe7bdba88
adds a --help option to /sbin/wifi
...
Signed-off-by: Sebastian Philipp <sebastian@spawnhost.de>
SVN-Revision: 24258
2010-12-05 11:22:56 +00:00
9a996248d4
base-files: derive connect_time from uptime as local system time may warp due to rdate, ntp and other means
...
SVN-Revision: 24212
2010-12-01 19:55:24 +00:00
a8c3d1ab6d
base-files: save the connect time of interfaces in uci state
...
SVN-Revision: 24206
2010-12-01 17:37:32 +00:00
ca829e805b
base-files: disable ipv6 on bridge ports, this prevents stray RA assigned and link local addresses on bridge member devices
...
SVN-Revision: 24194
2010-11-30 00:46:21 +00:00
d0ab35c115
base-file: add metric option for static and dhcp protos, this simplifies the management of multiple default routes
...
SVN-Revision: 24020
2010-11-17 19:11:50 +00:00
59a3841c9c
base-files: mark libc as hold and essential, opkg should now bail out if someone tries to uninstall libc
...
SVN-Revision: 23960
2010-11-11 16:18:58 +00:00
c5711cadd3
base-files: change /dev permissions to 0755 when hotplug2 is used ( #6039 )
...
SVN-Revision: 23908
2010-11-07 00:28:15 +00:00
a8efa34da3
Fix permissions for /etc and other dirs after clean flash ( #6039 )
...
During the first OpenWrt boot after a clean flash (when the jffs2
partition is not yet initialized) tmpfs is used instead of the usual
jffs2 overlay filesystem. If this tmpfs is mounted with default
options, all directories created there (/etc, /etc/config, other
subdirectories in /etc) get permissions 1777 by default, and these
permissions then persist in the created jffs2 at least until
subsequent sysupgrade. Mounting tmpfs with mode=0755 fixes the
permission problem.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
SVN-Revision: 23906
2010-11-07 00:26:00 +00:00
cfe4db7bda
base-files: mark /etc/shadow as conffile
...
SVN-Revision: 23590
2010-10-23 15:49:04 +00:00
d856ed78ad
base-files: add udhcpc vendorid option ( #7744 )
...
SVN-Revision: 23279
2010-10-06 21:21:28 +00:00
8dc04c9018
base-files: mark /etc/sysupgrade.conf as conffile
...
SVN-Revision: 23264
2010-10-05 22:08:23 +00:00
d80f82d7a4
base-files: - add sysupgrade support for keepfile hints * introduces /lib/upgrade/keep.d/ for per-package keepfile lists * introduces /etc/sysupgrade.conf for user defined keepfile hints - prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg - change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and opkg list-changed-conffiles
...
SVN-Revision: 23258
2010-10-05 19:24:12 +00:00
978ecae685
base-files: sysupgrade: merge info from "opkg list-changed-conffiles" to backup file list
...
SVN-Revision: 23233
2010-10-05 07:40:25 +00:00
a65975e0d6
base-files: mark /etc/rc.local as conffile
...
SVN-Revision: 23232
2010-10-05 07:32:37 +00:00
0fda5f7507
base-files: utilize uci_get_state to read the previous dhcp router address in udhcpc default script. The setup_switch() procedure provided by swconfig calls config_load() during network restart and thus confuses udhcpc's uci state keeping resulting in a missing default route on each second network restart. Bypass the cached state vars and query uci directly to make the script immune against unwanted runtime changes.
...
SVN-Revision: 23211
2010-10-04 00:07:07 +00:00
6bcdab79b6
base-files: prevent possible sourcing of JFFS2 meta files when merging overlay hooks
...
SVN-Revision: 23114
2010-09-23 17:32:58 +00:00
b125e3f68e
Fixed duplicated content in file in commit 23111
...
SVN-Revision: 23112
2010-09-23 14:06:47 +00:00
7fe34123d6
Missed file committing previous change 23110
...
SVN-Revision: 23111
2010-09-23 14:03:22 +00:00
18b473ca9b
base/block-extroot, base/block-mount: Modified preinit and block-extroot and block-mount so that use of block-mount and block-extroot do not require that block-extroot, block-mount, nor the kernel modules they depend, on are required to included in the image. That is block-extroot and dependencies may now be installed as modules onto the jffs2 part of a squashfs system and it will work. In addition packages which are installed into the jffs2 of a squashfs system may now affect preinit, so long as they do not require execution of commands that occur before the merging of the jffs2 and built-in (squashfs) preinit scripts is done.
...
Thanks jow for the preinit merge stuff!
SVN-Revision: 23110
2010-09-23 13:58:05 +00:00
1385904dfa
base-files: Add function pi_include the /lib/functions/boot.sh used by preinit, which safely sources files as well as working correctly whether the script using it is a package added to the jffs2 part of a squashfs or built into an image or on some other root filesystem.
...
SVN-Revision: 23099
2010-09-19 23:29:40 +00:00
cdd98e3f3a
base-files: bump pkg revision after r23091, r23092
...
SVN-Revision: 23093
2010-09-19 15:14:42 +00:00
52531f4eb6
base-files: kill possibly existing udhcpc instance when bringing up a dhcp iface, utilize service_kill() in dhcp shutdown. Based on patch by Stijn Tintel. Possibly related to #7314
...
SVN-Revision: 23092
2010-09-19 15:13:06 +00:00
84b7b812f3
base-files: cached state vars after scan_interfaces might be out of sync when binding dhcp leases, this could lead to an unconfigured wan interface in certain circumstances. Replace config_get calls with uci_get_state
...
SVN-Revision: 23091
2010-09-19 15:04:08 +00:00
4815de3f26
base-files: introduce service_kill() into functions.sh - a convenience wrapper for killing services by pid or pidfile with a grace period for termination before kill
...
SVN-Revision: 23087
2010-09-19 14:03:32 +00:00
91118a9500
base-files: add an experimental "-c" flag which tries to preserve *all* changed files in /overlay/etc minus some system files
...
SVN-Revision: 22977
2010-09-07 22:20:26 +00:00
5949f33b06
base-files: make build dependant on opkg/host
...
SVN-Revision: 22948
2010-09-06 02:13:19 +00:00
62c1740676
toolchain: fix the sysroot mess by getting rid of $(TOOLCHAIN_DIR)/usr and moving it back to $(TOOLCHAIN_DIR), this change makes the toolchain relocatable again, which should fix the SDK
...
SVN-Revision: 22723
2010-08-19 12:49:51 +00:00
63991ba875
base-files, uci: properly revert list state on config_load This fixes a bug where lists end up with duplicate values if config_load was invoked multiple times.
...
SVN-Revision: 22629
2010-08-14 00:45:15 +00:00
cbc8b3968c
base_files: Remove . from end of localhost entry
...
SVN-Revision: 22508
2010-08-06 08:00:40 +00:00
8c4ac87e8f
base-files: r22444 caused interfaces to remain down if the macaddr option is used, fix it. Also localize the txqueuelen option variable
...
SVN-Revision: 22467
2010-08-02 20:45:52 +00:00
56aa129fed
add txqueuelen option, patch from Roberto Riggio
...
SVN-Revision: 22444
2010-07-31 22:32:28 +00:00
9bf9ea9802
base-files: localize variable in do_move_devtmpfs(), remove extra temporary variable and shorten conditional
...
SVN-Revision: 22380
2010-07-24 19:33:11 +00:00
6a85a3b53b
package/base-files: add support for devtmpfs (thank you rauchwolke at gmx.net)
...
SVN-Revision: 22379
2010-07-24 19:21:27 +00:00
e1a654dd9f
base-files: unconditionally unlock the rootfs_data partition ( #7437 )
...
SVN-Revision: 22377
2010-07-24 15:47:15 +00:00
1dd824a358
base-files, busybox: fix 22279, simplify code and get rid of awk
...
SVN-Revision: 22282
2010-07-18 18:36:12 +00:00
8974bc6ae2
base-files & telnet: Fixed telnet starting even with root password when shadow passwords in use.
...
SVN-Revision: 22279
2010-07-18 15:18:38 +00:00
3e75044a95
wifi: fix duplicate ht capabilities in the hostapd config file by clearing the list at config load time
...
SVN-Revision: 22099
2010-07-08 18:36:12 +00:00
506db2a57e
base-files: add "mtu" option for route sections, allows setting per-route mtu values
...
SVN-Revision: 22003
2010-06-30 23:46:34 +00:00
ce5d644ac1
base-files: enable IPv6 forwarding by default since the default firewall supports ip6tables now
...
SVN-Revision: 21766
2010-06-12 16:59:12 +00:00
93c2c81bcf
base-files: introduce option "broadcast" for proto=dhcp interface to enable the broadcast flag in DHCP requests, required by certain providers
...
SVN-Revision: 21661
2010-06-02 20:21:41 +00:00
fa244a1265
base-files: remove IPv6 LL addr from interfaces before adding them to a bridge
...
SVN-Revision: 21659
2010-06-02 17:18:38 +00:00
94db915196
base-files: - add aliases to device by default (not ifname) - introduce option "layer" to select the target ifname to attach the alias to: - 3 use tun device (tun over bridge over device) fallback to bridge or device - 2 use bridge (bridge over device) fallback to device - 1 use device
...
SVN-Revision: 21655
2010-06-02 00:22:13 +00:00
75941a19ac
base-file: move alias setup to route hotplug, this fixes alias sections for non-static interfaces like ppp, dhcp, 6in4 etc.
...
SVN-Revision: 21652
2010-06-01 21:43:52 +00:00
c14e8be337
base-files: don't skip subsequent hotplug rules when doing makedev for tun or tap interfaces - this fixes support for uci managed OpenVPN interfaces and other externally created tuntap devices
...
SVN-Revision: 21641
2010-05-31 01:22:36 +00:00
261d41a906
base-files: - use add_dns() and remove_dns() for when changing resolv.conf.auto for static or dhcp interfaces - force 0644 permissions when creating resolv.conf.auto, fixes dnsmasq permissions denied problem with pppd interfaces - revert dns servers in /sbin/ifdown - bump package revision
...
SVN-Revision: 21638
2010-05-30 18:23:43 +00:00
09df0523fd
base-files: revert r21595
...
SVN-Revision: 21597
2010-05-28 10:52:02 +00:00
482b8385d2
base-files: bring bridge port iface down before changing the mac ( #7111 )
...
SVN-Revision: 21595
2010-05-28 00:59:19 +00:00
8bc961239b
base-files: 3g connection interfaces are now called "3g-*" - adjust 10-net hotplug handler to match them
...
SVN-Revision: 21591
2010-05-28 00:35:54 +00:00
c0820d3261
base-files: respect .auto option when running coldplug_interface_*() hooks on boot
...
SVN-Revision: 21588
2010-05-27 23:04:56 +00:00
6df2ad3e70
when changing the mac address of a bridge interface, keep member interface addresses in sync (patch from #7111 )
...
SVN-Revision: 21577
2010-05-27 14:04:28 +00:00
d6a142375b
base-files: fix a preinit hang in jffs2_ready() when no rootfs_data partition is found ( #7362 )
...
SVN-Revision: 21511
2010-05-20 05:57:54 +00:00
da55c9639a
base-files ( #7316 ) - improve rdate reliability - make rdate config more ntp like - move time server list to /etc/config/timeserver - bump package revision
...
SVN-Revision: 21495
2010-05-17 19:54:35 +00:00
ea06a67eac
base-files: use uci_get() wrapper ( #7312 )
...
SVN-Revision: 21490
2010-05-17 19:34:08 +00:00
be41fdd01a
base-files: add add_dns() and remove_dns() helpers to network config, useful to merge dns entries from multiple interfaces
...
SVN-Revision: 21391
2010-05-07 01:17:47 +00:00
6a3cbba92e
base-files: add a coldplug_interface_* hook to bring up non-hotpluggable interfaces on boot
...
SVN-Revision: 21389
2010-05-06 19:50:22 +00:00
dd38b15b75
base-files, ppp: fix interface shutdown
...
SVN-Revision: 21386
2010-05-06 01:14:24 +00:00
66ab73d01f
base-files, ppp: remove protocol specific cleanup code from /sbin/ifdown and move it to protocol stop callbacks
...
SVN-Revision: 21383
2010-05-05 23:24:11 +00:00
f9591d229a
base-files: do not bring up wlan interfaces from hotplug events, so that wrong network/wireless configs are more noticeable
...
SVN-Revision: 21379
2010-05-05 15:56:58 +00:00
a481cafb55
base-files: Remove redundant stopping of watchdog
...
busybox watchdog applet should stop the watchdog before shutting down
SVN-Revision: 21341
2010-05-03 10:56:58 +00:00
20da5f495f
add stop() to watchdog init script, patch from Yury Polyanskiy
...
SVN-Revision: 21334
2010-05-03 09:05:35 +00:00
ebb5858ba8
package/base-files: fix libraries packaging on 64bits targets ( closes : #6918 )
...
SVN-Revision: 21282
2010-05-01 13:29:04 +00:00
1847940688
Fix bug in foregrounding in /etc/init.d/rcS
...
Not using the config_xxx functions correctly. Amended.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 20928
2010-04-16 18:14:08 +00:00
e5e0966186
package/base-files: fix typo in r20874 (thanks to rhk for spotting it)
...
SVN-Revision: 20878
2010-04-15 08:22:39 +00:00
15542fcdd8
package/base-files: use a single $(CP) instead of two to copy shared library files
...
SVN-Revision: 20874
2010-04-15 06:01:45 +00:00
eafa2ec962
option to allow boot to run to completion before starting shell
...
Setting the system variable "foreground" to yes causes the system to run
the init scripts in series and wait for completion.
This is useful if (a) you don't want the user getting into the console
until the system is initialized, or (b) you have things going on in your
scripts that require strict ordering (and no possible race conditions).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 20841
2010-04-13 19:57:25 +00:00
c82bcb2a29
fix jffs2 and mini_fo mount in failsafe (patch from #7134 )
...
SVN-Revision: 20838
2010-04-13 14:24:58 +00:00
Mirko Vogt
Steven Barth
Gabor Juhos
Florian Fainelli
Imre Kaloz
Felix Fietkau
Jo-Philipp Wich
Vasilis Tsiligiannis
Jonas Gorski
Nicolas Thill
Daniel Dickinson
Michael Büsch
Hamish Guthrie
Alexandros C. Couloumbis