caff3b5aee
broadcom-diag: fix 'autoload' number of diag.ko
...
Change the autoload number from '5' to '05' so the module loads earlier (as intended).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38293
2013-10-02 23:14:08 +00:00
302d27f268
c80211: add iwldvm to iwlwifi, this is needed to support the old wifi card.
...
This closes #14258
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38277
2013-10-01 22:41:46 +00:00
c57ac5fcb7
kernel: add industrialio-triggered-buffer.ko only when the config option is selected.
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38276
2013-10-01 22:40:32 +00:00
1158f22b02
ep93xx: fix sound dependencies for ep93xx
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38274
2013-10-01 22:38:40 +00:00
391ec155a0
kernel: lib-textsearch needs to be auto probed for amanda nat to work
...
https://dev.openwrt.org/ticket/14232
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38262
2013-09-30 20:48:12 +00:00
17be4e9d14
mac80211: add AP inactivity handling / probing fixes to improve stability
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38257
2013-09-29 19:42:00 +00:00
f07713f7cf
mac80211: really fix the long standing wds ap tx power regression ( #14153 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38255
2013-09-29 12:53:21 +00:00
2beabf6c11
ath9k: fix an AP mode powersave issue with aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38249
2013-09-29 11:07:58 +00:00
32d54de3b9
kernel: disable kmod-iio for linux 3.6 as well (to avoid build issues due to missing config symbol changes)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38247
2013-09-28 05:22:05 +00:00
e2420239ae
kernel: exclude regmap-spi.ko if SPI support cannot be selected
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38245
2013-09-27 21:12:15 +00:00
1f037b5248
kernel: make sound-soc-core depend on kmod-ac97
...
it has a conditional #ifdef based dependency on it, which trips up on
some targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38242
2013-09-27 21:12:04 +00:00
3c045e9933
kernel: remove old kernel compat code for pcmcia
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38239
2013-09-27 20:47:09 +00:00
e232a92c08
kernel: mark kmod-thermal menuconfig symbol as hidden to avoid building it on targets with no thermal drivers
...
Should fix build errors with Linux 3.3/3.6 targets, which use different
kconfig symbols
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38238
2013-09-27 20:44:11 +00:00
eb486aadb8
kernel: add thermal modules
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38230
2013-09-27 10:49:33 +00:00
7530971113
package/kernel: add support for industrial-io and AD799x
...
Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38187
2013-09-25 18:00:35 +00:00
4fcc9ce9ff
package/kernel: add hwmon driver for ADT7410
...
Add support for the ADT7410 hwmon driver, a high precision
I2C temperature sensor.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38186
2013-09-25 18:00:34 +00:00
6ac0dfb280
package/kernel: move I2C-GPIO drivers from i2c.mk to other.mk
...
Move pca953x support from i2c.mk to other.mk, where other
GPIO drivers are located. Remove duplicate pcf857x support
from i2c.mk.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, and reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38185
2013-09-25 18:00:33 +00:00
9d24525b1d
kernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38055
2013-09-19 06:33:53 +00:00
5799adc238
lantiq: fix bug in hcd gpio detetcion code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38043
2013-09-18 16:31:49 +00:00
4c52ed50d7
brcm47xx: update board detection patches
...
This is now the version which was send for mainline Linux kernel
inclusion. The data needed to detection a board is now stored in init
data.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38036
2013-09-18 14:33:54 +00:00
50bc1a7593
ath9k: add missing tx locking
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38034
2013-09-18 13:24:55 +00:00
1878a3d6ab
lantiq: add v3.10 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
2b0cb17d42
lantiq: update packages for v3.10
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38028
2013-09-17 21:45:56 +00:00
f12f4074af
kernel: make most modules use AutoProbe
...
now that we have modprobe we can set more than half of the modules to AutoProbe
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38021
2013-09-17 21:45:17 +00:00
b3ceaf834d
ath9k: merge a fix for PS-Poll responses + aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38017
2013-09-17 10:07:56 +00:00
5d8cdd84e8
kernel: fix config symbol for kmod-crypto-hash
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38015
2013-09-17 09:54:05 +00:00
fd44388bbf
mac80211: drop spoofed packets in ad-hoc mode ( fixes #12427 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38013
2013-09-17 09:17:40 +00:00
bf8cf89fc9
broadcom-diag: add GPIO configuration for Linksys E2000 V1
...
Thank you Javier Achirica for the patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38008
2013-09-16 19:52:23 +00:00
2b4e96fe09
broadcom-diag: Add WRT310N v1 gpio leds and buttons
...
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38007
2013-09-16 19:50:14 +00:00
86405f2c4c
brcm47xx: add detection code for Huawei E970
...
This is based on a patch by Mathias Adam.
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38001
2013-09-15 17:00:45 +00:00
7a704be4bb
ath9k: add another minor tx path fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37985
2013-09-14 15:30:13 +00:00
6eeb0261e6
ath9k: merge a fix for tx processing issues with aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37982
2013-09-14 14:46:39 +00:00
0c597a8f53
kernel: add missing config option
...
SVN-Revision: 37978
2013-09-13 20:39:23 +00:00
b73b915c54
brcm47xx: board detection, GPIO for Linksys E1000 V2.1
...
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.
This fixes bug #14135 . Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.
Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37977
2013-09-13 19:24:08 +00:00
6c14f5f3a6
brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
...
Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37970
2013-09-13 16:00:52 +00:00
15ea1a6d66
kernel: gsc depends on kmod-i2c-core
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37960
2013-09-12 23:38:54 +00:00
e4c837f6d6
kernel: fix imx sata module
...
The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37950
2013-09-11 22:08:46 +00:00
a43c2d4e6f
kernel: add imx sata module
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37937
2013-09-10 22:26:37 +00:00
7d73153e86
kernel: allow hwmon GSC driver for all targets
...
- enable using hwmon GSC driver on all targets
- add a kmod package for it
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37933
2013-09-10 22:26:30 +00:00
247299bfa0
rt2x00: merge an rt2800 initialization order fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37922
2013-09-09 17:31:53 +00:00
768e6750d7
ath9k: clean up some patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37919
2013-09-08 09:38:38 +00:00
249c396583
mac80211: merge a big batch of upstream changes/improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37918
2013-09-08 09:38:32 +00:00
bdc04e379f
mac80211: kmod-rtl_pci: fix dependencies
...
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37905
2013-09-05 20:17:28 +00:00
f9b790bd55
kernel: kmod-libphy, kmod-tg3: fix load order
...
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37904
2013-09-05 19:57:44 +00:00
9af52f3a2c
kernel: kmod-ssb, kmod-b44: fix load order
...
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)
Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37903
2013-09-05 19:56:04 +00:00
fd561a47c5
kernel: kmod-firewire: fix dependencies
...
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37902
2013-09-05 19:53:21 +00:00
11ae55cc95
mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
...
linux-firemware contains the same version we loaded without this patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37901
2013-09-05 19:43:38 +00:00
14a65f1cfb
kernel: kmod-fs-xfs: fix dependencies
...
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37900
2013-09-05 19:41:00 +00:00
09a55136d7
kernel: kmod-usb-serial-keyspan: fix dependencies
...
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37899
2013-09-05 19:39:55 +00:00
82a2969100
ath10k: enable Atheros 802.11ac driver
...
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.
This goes build tested, not run time tested.
[Hauke: I did some minor changes]
Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37898
2013-09-05 19:35:14 +00:00
Hauke Mehrtens
John Crispin
Felix Fietkau
Luka Perkov
Gabor Juhos