ed20caeb65
ramips: fix image format for WSR-1166
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43812
2015-01-02 21:53:31 +00:00
10c2bdbc4f
ramips: disable ethernet checksum offloads for mt7621, they are broken
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43811
2015-01-02 21:53:24 +00:00
51b1f0ca5c
ramips: use netif_receive_skb instead of napi_gro_receive when rx csum offload is unavailable
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43810
2015-01-02 21:53:18 +00:00
81e3014e6d
ramips: rework and fix m25p80 chunked-io support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43808
2015-01-02 21:53:02 +00:00
aefd3c569c
ramips: split mt7621 spi into a separate driver, increase maximum transfer size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43807
2015-01-02 21:52:53 +00:00
6bfd210ade
honor the bootloader's bootargs
...
Only overwrite the bootloader's bootargs if "chosen" exists in the dtb
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43802
2015-01-02 16:48:20 +00:00
0ffb7323d0
ralink: remove partitoon map from mt7621.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43720
2014-12-15 15:55:37 +00:00
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
fbea00b031
ramips: update mtd patches to apply after changes from r43700
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43709
2014-12-15 09:10:43 +00:00
6f2b7567b8
ralink: drop old pinmux nodes from dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43701
2014-12-14 08:57:16 +00:00
263070a2e7
ramips:Add support for Aigale Ai-BR100
...
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 43681
2014-12-13 08:07:03 +00:00
6c4e7b22eb
ralink: fix lenovo y1 wan port mapping
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43667
2014-12-12 16:17:31 +00:00
b1f7a027da
ralink: make uartf functional on AWM002
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43664
2014-12-12 16:17:03 +00:00
1ef2106725
ralink: mt7621 was missing a symbol that made the CC builder fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43629
2014-12-11 18:54:30 +00:00
9a495f6bbb
kernel: refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
8a123f6f66
ramips: generate factory images for Nexx devices
...
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 43541
2014-12-07 16:53:22 +00:00
d04c4a311e
ralink: mt7621 is a 1004Kc
...
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 43514
2014-12-03 20:22:42 +00:00
506cf51b53
ralink: fix pci reset patch
...
sorry, forgot to make target/update before commiting the last patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43374
2014-11-24 20:39:48 +00:00
41f9765acd
ralink: add proper reset of pci core
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43370
2014-11-24 19:12:35 +00:00
d93dc245e5
ralink: various fixes to the wm8960 setup code
...
still no sound but the codec is properly detected now, powers up and i can hear
noise on the speakers.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43305
2014-11-19 09:20:12 +00:00
989bfd815b
ralink: make the dmaengine driver compile under 3.14
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43304
2014-11-19 09:20:02 +00:00
e1f6d0dd0a
ralink: fix tx vlan offload and hardware status
...
hardware status and tx vlan offload support on all targets
except rt5350. so i modify the IS_ENABLE condition only for
mt7621.
support mt7621 hardware status reference by SDK. but i don't
have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE
to 0 to let software count.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 43303
2014-11-19 09:19:57 +00:00
a5f562993e
ralink: support netconsole
...
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 43302
2014-11-19 09:19:49 +00:00
9c5dfd9546
ralink: improve tx vlan offload
...
hardware tx vlan offload only support max 16 vids
now use add/delete vlan interface to update vlan id table
when duplicate vlan id index detect.
disable hardware tx vlan offload support.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 43301
2014-11-19 09:19:43 +00:00
510ff1f1b8
ralink: merge the mt7620a/n subtargets
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43300
2014-11-19 09:19:38 +00:00
752745a85a
ralink: set ralink_soc on mt7621
...
sdhci failed to init because of this
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43293
2014-11-17 21:58:30 +00:00
32d4348540
ralink: fix pcie reset
...
some old mt7620a uboots dont reset the pcie core properly. work around this
issue in the kernel driver.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43292
2014-11-17 16:27:48 +00:00
28b26fa603
ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166D
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43283
2014-11-16 12:26:53 +00:00
b3f2d3d01b
ramips: use mediatek,mtd-eeprom instead of ralink for mt76
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43282
2014-11-16 12:26:47 +00:00
02c319c27a
ramips: fix default config breakage on whr-1166d
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43281
2014-11-16 11:39:19 +00:00
c073bf6bdf
ralink: few updates tot he sdhci probe code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43275
2014-11-15 14:35:32 +00:00
ce1c580efb
ralink: make the sdhci module build again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43274
2014-11-14 18:51:41 +00:00
7cc72e4b93
ralink: dont define pm_poweroff
...
this makes gpio-poweroff work
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43254
2014-11-14 16:53:40 +00:00
be23eaa8c3
ralink: fix bank detection in mt7621 gpio driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43253
2014-11-14 16:53:34 +00:00
6d4282086d
ralink: enable the proper drivers in the mt7621 config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43252
2014-11-14 16:53:29 +00:00
0767ee848a
ralink: fix broken pinmux function naming inside mt7621.c
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43251
2014-11-14 16:53:21 +00:00
8cde8a05c9
ralink: update sdhci driver
...
the new driver handles newer SoCs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43250
2014-11-14 16:53:15 +00:00
66463a5b5d
ralink: update pcie driver to load ranges from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43249
2014-11-14 16:53:07 +00:00
7963782b86
ralink: add a new global ralink_soc variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43248
2014-11-14 16:53:01 +00:00
caa29dea2c
ralink: update ethernet driver to use new ralink_soc variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43247
2014-11-14 16:52:52 +00:00
bf8bb5b611
ralink: fix the 10mbit bug on mt7621
...
a missing "val =" caused the AN bit in the phy0 reg to be flushed.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43246
2014-11-14 16:52:47 +00:00
194ca6127e
ralink: improve mt7530 support
...
the SDK does a bit of extra init that we did not do yet when using an external mt7530.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43245
2014-11-14 16:52:42 +00:00
0371dabc13
ralink: add support for WSR-600/1166
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43244
2014-11-14 16:52:36 +00:00
062828aee0
ralink: mt7621 has a different base addr for PVID
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43243
2014-11-14 16:52:30 +00:00
938e1e03fb
ralink: drop some unused code from pci-mt7620a
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43242
2014-11-14 16:52:25 +00:00
bfcdc8711c
ralink: fix up dts for mt7621 eval board
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43238
2014-11-12 14:55:00 +00:00
86e3315ece
ralink: add support for mt7621 ethernet
...
somehow all switch ports still come up as 10mbit.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43237
2014-11-12 14:54:50 +00:00
45814d150a
ralink: more mt7530 fixes
...
make 1166 wan port work. this broke due to the esw_polling bug
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43236
2014-11-11 11:46:16 +00:00
e399931376
ralink: fix mdio polling of external phys if only 1 phy exists
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43235
2014-11-11 11:46:09 +00:00
6623feb572
ralink: remove IC plus phy driver
...
this driver confuses some boards
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43234
2014-11-11 11:46:02 +00:00
da53ac677f
ralink: DCS-930: enable sound
...
Camera has microphone; in order to use it by default enable sound support.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43232
2014-11-11 00:08:05 +00:00
494c6e7f6e
ralink: update DCS-930 dts
...
* read MAC address from factory partition
* remove port defines since there is only one port (most likely C/P error)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43231
2014-11-11 00:05:14 +00:00
9e98d559f6
ramips: fix initramfs image build handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43219
2014-11-08 15:40:17 +00:00
455ba77b6a
ramips: add eeprom data for 802.11ac wlan on WHR-1166D
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43218
2014-11-08 14:15:49 +00:00
29f71d384f
ramips: add missing size/address-cells to device tree include files
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43217
2014-11-08 14:15:44 +00:00
604a3e5134
ralink: fix a regression that broke pcie on mt7621
...
i accidentally dropped 2 lines while adding mt7628 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43216
2014-11-08 13:45:26 +00:00
07754ac297
ramips: enable sysupgrade for whr-600d, whr-1166d
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43213
2014-11-08 12:18:58 +00:00
503a34ca50
ralink: fix the compat string for mt7620a pci
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43211
2014-11-08 12:12:05 +00:00
89f74722b7
ralink: assign default ranges inside the pci driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43207
2014-11-07 10:51:08 +00:00
9007e2244f
ralink: mt7628 does not actually need this fix for the ethernet driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43206
2014-11-07 10:51:00 +00:00
c32ad22e40
ralink: improve r43200
...
r43200 tries to detect if the fixup is needed or not. control the behaviour via
OF instead and disable unused ports.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43201
2014-11-06 12:19:53 +00:00
0cc0ba2b3a
ralink: only apply ephy1 fixup if the phy is present
...
this broke e1700 lan2 as the fixup was applied to the phy inside the mt7530.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43200
2014-11-06 11:11:44 +00:00
78b6222851
ralink: tweak e1700 dts file
...
the current driver code wont know which mt7530 to apply the llllw setting to.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43199
2014-11-06 09:31:45 +00:00
c5954fc510
ralink: make pci driver handle mt7628
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43198
2014-11-06 09:31:37 +00:00
cadf517107
ralink: add support for mt7628
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43197
2014-11-06 09:31:31 +00:00
f8404aaf9e
ralink: add mt7628 support to the ethernet driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43196
2014-11-06 09:31:19 +00:00
26504289df
ralink: cleanup ethernet Makefile/Kconfig
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43195
2014-11-06 09:31:09 +00:00
d524fe46fd
ralink: move ethernet driver to files/
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43194
2014-11-06 09:31:03 +00:00
d738d22bf8
add support for the Linksys E1700
...
SVN-Revision: 43186
2014-11-05 14:37:13 +00:00
b25b58a96a
ralink: add pci bidge node to mt7620a dts file
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43172
2014-11-03 20:20:46 +00:00
cc142739f2
ralink: fix wan port on whr-1166
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43171
2014-11-03 20:20:40 +00:00
cc5194cf03
ramips: add support for Airlink101 AR670W
...
This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader
is a hacked u-Boot that reads an LZMA image directly, so we skip
generating the uImage header and enable the lzma mtdsplit parser.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43153
2014-11-03 08:00:13 +00:00
2f30ba5328
ralink: make sure a mii_bus is loaded before accesing its state
...
this caused a crash on boot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43120
2014-10-30 10:10:57 +00:00
0b64dca49d
ralink: load mt7530 driver on the 3 buffalo units
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43119
2014-10-30 10:10:51 +00:00
0b19244498
ralink: mt7530 - force wan port up
...
some bootloaders (linksys e1700) set wonky hw trap values. reset this upon boot to make all ports work.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43117
2014-10-30 08:44:00 +00:00
38692d14f2
ralink: fix mt7530 for newer silicon revisions
...
latest mt7530 silicon seems to have a different phy id.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43113
2014-10-30 08:07:49 +00:00
152d692a1f
ramips: improve ralink ethernet driver
...
Change list:
* add tx scatter gather function.
* add software rx vlan offload to let GRO work.
* add jumbo frame support. because use build_skb so max MTU is 3812.
* enable hardware tx vlan.
* enable GRO and remove LRO. because it can improve performance and can work on forwarding.
* enable/fix tx padding function.
* let napi handle tx clean up.
* support ethtool operation. now support message level, hardware status and coalesce.
* ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it.
Notes:
* build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a.
* TCP NAT performance improve. test with netperf.
- rt2880(gigabit) from 5x to 12x Mbps.
- rt3x5x from 6x to 94 Mbps.
- rt5250 from 5x to 8x Mbps.
- rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame.
- mt7620 still 94Mbps.
* TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 43108
2014-10-29 19:43:59 +00:00
c0bf47232a
ralink: fix switch config on mt7530 evb
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43105
2014-10-29 18:51:02 +00:00
8223e78121
ralink: fix a off by 4 bug in mt7530
...
0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43104
2014-10-29 18:49:46 +00:00
d0bf15f235
ramips: add support for A5-V11 board (resubmit)
...
(Reposted due to an issue with the patchwork server during original submission)
Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)
Signed-off-by: Gareth Bryan <gareth@mx9.org>
SVN-Revision: 43102
2014-10-29 11:01:17 +00:00
d1a1ad3e66
ramips: fix filenames in PorayDualSize factory images
...
SVN-Revision: 43073
2014-10-26 17:18:45 +00:00
c288d2d6d9
kernel: makefiles: make use of new var KERNEL_PATCHVER
...
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
5c33e9565b
ramips: add comments for image/Makefile.
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42991
2014-10-20 06:29:51 +00:00
6e1637f8fa
firmware-utils: restore compilation of mkhilinkfw.
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42989
2014-10-20 06:29:38 +00:00
7bac455a4c
ramips: add support for Nexx WT3020 devices
...
SVN-Revision: 42983
2014-10-20 06:28:48 +00:00
5b40a150ea
ramips: sort boards in upgrade/platform.sh alphabetically
...
SVN-Revision: 42982
2014-10-20 06:28:39 +00:00
35e9d448f2
ramips: fix usercfg partition offset for WHR-1166D
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42958
2014-10-19 08:45:56 +00:00
20940138ac
scripts: fix wrong usage of '==' operator
...
[base-files] shell-scripting: fix wrong usage of '==' operator
normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.
this patch does not change the behavior/logic of the scripts.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 42911
2014-10-14 12:21:11 +00:00
06a849575d
ralink: Build 8M image for 7Links PX-4885
...
7Links PX-4885 (clones) can also be purchased with 8MB flash.
Creating images for these routers, use dtsi for common part
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 42892
2014-10-13 19:41:36 +00:00
1bbc5de86e
ralink: various i2c related fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42868
2014-10-10 08:56:53 +00:00
af1207b58c
ramips: add support for Nexx WT1520
...
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 42867
2014-10-10 08:56:43 +00:00
97c202968a
ralink: various i2c fixes
...
the driver did not handle all states correctly causing a deadlock of the i2c hw block.
Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>
SVN-Revision: 42807
2014-10-06 20:05:13 +00:00
d76b7e0221
ramips: D-Link DIR-810L: make led naming consistent with other boards
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 42789
2014-10-06 04:52:36 +00:00
98114e7cdd
ralink: Add missing code to free GPIO on Ralink SoC
...
Signed-off-by: schildt@ibr.cs.tu-bs.de
Acked-by: info@gerhard-bertelsmann.de
SVN-Revision: 42788
2014-10-06 04:52:26 +00:00
b04bb3eea7
ramips: Support for RAMIPS based Tripmate HT-TM02 board
...
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.
Signed-off-by: Ron Curry <wingspinner@gmail.com>
SVN-Revision: 42785
2014-10-06 04:52:07 +00:00
d4cc995c53
ramips: D-Link DIR-810L. Add support for SoC 2.4 GHz wireless and fix leds naming
...
SVN-Revision: 42619
2014-09-19 11:07:08 +00:00
4ef1237545
ralink: drop dwc_otg support. dwc2 seems stable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42617
2014-09-19 10:52:37 +00:00
17cf9c4593
ralink: drop 3.10 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42481
2014-09-12 06:50:46 +00:00
02629d8f87
kernel: update 3.14 to 3.14.18
...
Targets were build tested and patches are refreshed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
4662c3b847
ralink: dwc_otg->dwc2
...
the old dwc_otg driver is starting to fall apart and fails on newer 3g
modems and some storage devices. switch to the upstream dwc2 driver which
is no longer in staging/.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42446
2014-09-08 17:33:16 +00:00
bdba024c7b
ralink: add dwc2 device_reset() call
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42445
2014-09-08 17:32:52 +00:00
4d96ccd87a
target: set myself as maintainer
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42335
2014-08-30 09:59:18 +00:00
d1f8b9bd76
ralink: DIR-645 picks up incorrect MAC address in DTS file
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42321
2014-08-28 09:19:56 +00:00
24a6617585
ramips: unbreak i2c for 3.14
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42315
2014-08-28 06:05:36 +00:00
1349ebb5ba
ralink: set 3.14 as default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42305
2014-08-26 13:12:12 +00:00
0c14bea523
ralink: the mt7620 evb has a usb port
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42293
2014-08-25 16:31:13 +00:00
d3d9d55cde
ralink: a few 3.14 related fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42292
2014-08-25 16:31:09 +00:00
843fc45e27
ralink: fix mt7620 ohci 3.14
...
the ohci phy was not reset properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42291
2014-08-25 16:31:05 +00:00
ca737049d2
ralink: fix mt7620 ohci 3.10
...
the ohci phy was not reset properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42290
2014-08-25 16:31:01 +00:00
3d00a1109e
ralink: mt7620 has obchi/ehci and not dwc2
...
fix the default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42289
2014-08-25 16:30:57 +00:00
fdc41e2fd7
ramips: enable second SPI for VoCore
...
This patch enables the second SPI as spidev and also fixes some typos.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 42277
2014-08-25 06:35:46 +00:00
a3fd3dc796
ramips: second spi device on rt5350
...
This is based on Jon Smirl's patch with the following changes:
- Set CS polarity as low by default.
- Add support for changing CS polarity.
- Add support for changing LSB/MSB.
- Add support for changing SPI mode.
- Fix indentations.
I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 42276
2014-08-25 06:35:42 +00:00
e9e519a147
ramips: fix OMNI-PLUG.dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42232
2014-08-21 06:41:27 +00:00
ff3ea02772
ramips: add omni plug leds
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42201
2014-08-18 16:09:21 +00:00
d04cab8dfc
ramips: Add support for Omnima MiniPlug
...
This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash
Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>
SVN-Revision: 42200
2014-08-18 16:06:48 +00:00
be6bbc7975
ramips: fix switch config for Edimax 3G-6200n
...
Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 42194
2014-08-18 13:10:04 +00:00
60bf96e3a0
ralink: clean up HAME profiles, remove unnecessary packages.
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 42192
2014-08-18 13:09:46 +00:00
a62e8bd145
ramips: add mpr-a1 to default profile
...
Add hame mpr-a1 to default ramips profile.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 42191
2014-08-18 13:09:43 +00:00
bb9a23aca2
ramips: Hame: change LED name mpr-x -> hame
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 42190
2014-08-18 13:09:39 +00:00
0fc4383d69
ramips: make use of the new board detection layer
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42186
2014-08-18 13:09:20 +00:00
3a9752bbd2
ramips: add a workaround to fix failsafe on RT5350
...
Due to TCP connections not working when VLAN is disabled, this is
needed to get failsafe functional.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 42179
2014-08-18 13:08:52 +00:00
f80312613d
ramips: enable additional GPIOs on HAME MPR-A1
...
According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose
6 unused GPIOs, only one of them working as configured in the current
DTS. This patch enables GPIO22-26.
Tested on hardware.
[1] http://i.imgur.com/kHVW2Ox.jpg
[2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 42178
2014-08-18 13:08:48 +00:00
bf1e92f526
ralink: add back the gpio_export_named() patch for 3.14
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42176
2014-08-18 13:08:33 +00:00
bc67bd2295
ralink: add 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42040
2014-08-07 14:41:19 +00:00
997ca19fd2
ralink: revert r37163
...
https://dev.openwrt.org/ticket/17071
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42036
2014-08-07 12:38:20 +00:00
17b8d9c976
ramips: add profile for easyacc wizard8800
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41986
2014-08-03 14:31:18 +00:00
058a5c85ef
firmware-utils: made mkdir615h1 work for all Senao-produced devices as mksenaofw and cleaned up some of its formatting
...
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 41962
2014-08-03 11:13:58 +00:00
04e4ff282a
ramips:support Lenovo AC1200 Wireless router
...
Lenovo AC1200 series has two types, Y1 and Y1S.
Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port.
Signed-off-by: Lintel <lintel.huang@gmail.com>
SVN-Revision: 41961
2014-08-03 11:13:52 +00:00
21845cb45d
ramips: Add support for VoCore
...
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 41939
2014-08-01 20:51:24 +00:00
7d9bac5247
ramips: Add support for SPI_CS1 pinmux
...
This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 41938
2014-08-01 20:51:14 +00:00
9efd7ebd34
ramips: add support for easyacc wizard8800
...
Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de>
SVN-Revision: 41936
2014-08-01 11:19:50 +00:00
c6674722b9
ramips: Fix LEDs on the Kingston MLW221
...
LED Fix up for the Kingston Mobilelite Wireless (MLW-221)
http://wiki.openwrt.org/toh/kingston/mlw221
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 41933
2014-08-01 11:19:39 +00:00
6fb04ff871
ramips: correct typo ubsphy -> usbphy
...
This appears to be a typo.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41859
2014-07-28 15:26:36 +00:00
6f6dc62ca2
ramips: fix mode switch gpio for AsiaRF AWM eval board
...
Fix a typo: gpio 21 is already used for the WPS led. Gpio 20 is the
right one (tested) for the mode switch. Confirmed that
/sys/kernel/debug/gpio state followed the position of the switch.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41858
2014-07-28 15:26:32 +00:00
636f2b83e6
ramips: add ethernet macaddr to dts for AWM003-EVB
...
Follows the pattern of http://patchwork.openwrt.org/patch/5970/
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41857
2014-07-28 15:26:23 +00:00
5b4abf87d7
ramips: add support for Kingston MLW221
...
This patch adds support for the Kingston Mobilelite Wireless (MLW-221)
http://wiki.openwrt.org/toh/kingston/mlw221
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 41841
2014-07-26 20:36:22 +00:00
b77e92e020
ramips: ethernet mac cleanup
...
Compile tested all subtargets and profiles.
Unfortunately I don't own any board affected by these changes, so no run tests.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41839
2014-07-26 20:36:09 +00:00
443aee86bf
ramips: fix vlan configuration for asiarf avm003
...
The earlier r41797 change was missing this part, to enable the right
vlan configuration.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41838
2014-07-26 20:36:01 +00:00
08fb5fb326
ramips: fix sysupgrade for asiarf awm003
...
Since the earlier r41797 change, the board_name for awm003 has been
miscalculated, and sysupgrade has been broken. This seems to fix it.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41837
2014-07-26 20:35:46 +00:00
0b5b8de818
ramips: fix gpio mapping on MZK-750DHP
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41811
2014-07-23 07:49:54 +00:00
e5d4e5dee3
ramips: fix missing inclusion of system.sh for mtd_get_mac_binary and friends.
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 41810
2014-07-23 07:49:50 +00:00
2c356c4bb7
ramips: add a profile for AWM003
...
same as AWM002 but with 64mb RAM
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41797
2014-07-22 09:58:21 +00:00
ba63338d3f
kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
...
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
4d22954db0
ramips: fix mac address partitions on ASL-26555
...
ASL-26555 16MB: caldata is present on uboot-env and devdata, but the proper one seems to be the devdata, since mac address corresponds to Amper, the real manufacturer, meanwhile the caldata on uboot-env corresponds to D-Link.
ASL-26555 8MB: caldata is only present on uboot-env, but its mac address corresponds to Alpha, the real manufacturer.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 41768
2014-07-20 17:30:28 +00:00
f44d3f9980
ramips: soc wmac eeprom cleanup
...
Move eeprom extraction from scripts to dts files.
Additionally there are few other changes like:
- whitespace fixes
- add partition labels where needed
- BR6524N board doesn't exist (lost in translation?)
- fix Edimax 3g-6200nl model
- add wmac eeprom to dts for Asus RT-N14U board
Compile tested all subtargets and their profiles.
Run tested on:
- Asus RT-N15
- Asus RT-N14U
- Buffalo WHR-600D
- Argus ATP52B
- Sparklan WCR-150GN
Few problems noted:
- many boards didn't have wmac eeprom information defined at all
- several boards don't have any patitions defined (see FIXME comments in dts)
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41680
2014-07-17 10:55:31 +00:00
74db9511dc
ramips: basic support for Planex MZK-750DHP
...
some gpios are still missing.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41654
2014-07-14 17:10:39 +00:00
e33584f6b8
ramips: squelch mdio debugging info on rt2880 ethernet
...
Use pr_debug rather than pr_info since it is only relevant
for debugging.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 41653
2014-07-14 17:05:40 +00:00
76ba6846a2
ramips: fix port mapping and extract wmac eeprom on ZBT-WA05 board
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41634
2014-07-14 07:38:32 +00:00
8c577d9fde
ramips: extract mac address from flash on WHR-600D board
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41633
2014-07-14 07:38:28 +00:00
4af1b51ec3
ramips: extract default lan_mac from eth0
...
The default case of ramips_setup_macs() is useful when mtd-mac-address is defined in dts.
But lan_mac is not set by default, this results in lan and wan having the same mac.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41632
2014-07-14 07:38:23 +00:00
ba3988fb16
ramips: add support for WR8305RT board
...
Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41584
2014-07-12 06:54:03 +00:00
03faf4618e
ramips: add support for Zbtlink WA05 router
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41579
2014-07-10 22:02:28 +00:00
6134a3de30
target/linux/*: more dead package cleanups
...
found 2 more
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41574
2014-07-10 20:15:50 +00:00
32e93efc73
target/linux/*: more dead package cleanups
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41571
2014-07-10 20:05:43 +00:00
94802dca60
ralink: wpa does not exist, use wpad-mini instead
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41561
2014-07-10 19:16:19 +00:00
bbfb3baaed
ramips: add missing rt3352 usb phy node to dts
...
Signed-off-by: michael <igvtee@gmail.com>
SVN-Revision: 41476
2014-07-02 16:37:30 +00:00
62287e589d
ramips: fix target rt5350 only have 28 gpios
...
Signed-off-by: michael <igvtee@gmail.com>
SVN-Revision: 41475
2014-07-02 16:37:26 +00:00
80e3282739
ralink: make xhci platform depend on mt7621
...
this broke CONFIG_ALL builds for mt7620
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41471
2014-07-02 14:32:43 +00:00
3d81a4ef82
ralink: add Wansview NCS601W IP Camera
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41453
2014-07-02 07:42:44 +00:00
c749b310ed
ralink: register wifi firmware for WRTnode
...
After r41444 wifi working on WRTnode. Tested.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41452
2014-07-01 18:17:55 +00:00
9c84f72f85
ramips: set default vid of each vlan, so it won't need be set explicitly.
...
Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>
SVN-Revision: 41448
2014-07-01 13:18:27 +00:00
4ddc0f9ff3
ramips: add WHR-1166 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41447
2014-07-01 10:26:42 +00:00
3c88de0d47
ramips: sync the WHR-600D flash layout with that of the vendor FW
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41446
2014-07-01 10:26:38 +00:00
2e8c6e4128
ramips: add wmac to mt7620a device tree
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41445
2014-07-01 10:26:33 +00:00
5f6e7e1f44
ramips: add wmac to mt7620n device tree
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41444
2014-07-01 10:26:30 +00:00
bbd8f9c96a
ramips: enable wmac clock for mt7620
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41443
2014-07-01 10:26:25 +00:00
22c4f2475b
ralink: refresh kernel patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41353
2014-06-26 13:47:50 +00:00
994e5ce2f9
kernel: update 3.10.36->3.10.44
...
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
975728813a
ralink: fix up WRTNode vs WRTNODE in the dts file
...
https://dev.openwrt.org/ticket/16899
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41343
2014-06-26 11:43:26 +00:00
021e728962
ralink: Update MT7530 switch driver.
...
- Support set VLAN ID of each vlan.
- Support untag feature.
- Replace register address with C MACRO.
- There are 8 ports for MT7530 actually.
Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>
SVN-Revision: 41331
2014-06-24 18:14:14 +00:00
9284956ad8
ramips: cleanup some rt305x profiles
...
move both asus boards to asus.mk
rename HW5503G profile to HW550-3G to match name in image/Makefile
(fixes #16599 )
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41271
2014-06-19 14:13:07 +00:00
dc5fe5f73f
ramips: RT-N56U support fixes and factory image creation
...
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>
SVN-Revision: 41224
2014-06-16 18:57:20 +00:00
4d7ed2a8a0
ramips: fixes XDXRN502J reset button
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41217
2014-06-16 18:54:53 +00:00
2fe435081d
ramips: add vlan configuration for asiarf awm002-evb
...
Without this, the ports all end up on vlan 1. This enables a separate
WAN port that works.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41216
2014-06-16 18:54:48 +00:00
ab390d6c05
ramips: restore AWM002-EVB profile in asiarf.mk
...
In a recent revision (r41177) John Crispin removed the profile for the
AsiaRF AWM002 eval board while adding another AsiaRF board. This
patch restores AWM002 and also corrects a misspelling and an
apparently errant reference to an Allnet ALL0239-3G device.
Signed-off-by: Galen Seitz <galens@seitzassoc.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41215
2014-06-16 18:54:42 +00:00
6d213a644d
ramips: add asiarf awapn2403 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41177
2014-06-13 09:16:15 +00:00
231f15c9db
ramips: fix rt2x00 handling of default packages for subtargets
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41145
2014-06-11 17:01:19 +00:00
3306a4f9ab
ralink: fix asiarf/awm002 switch setup
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40939
2014-06-02 12:44:57 +00:00
7437d84814
ralink: add seama image can be upgrade by sysupgrade
...
generate sysupgrade image by combine two images.
one is kernel image with seama header.
another is root fs image.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 40922
2014-06-02 12:43:49 +00:00
f933a741a9
target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
...
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:
root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
712dec1027
ramips: add missing profile for DIR-615-D
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40911
2014-06-02 12:43:07 +00:00
9b728bebfb
ramips: fix not set lan/wan mac address
...
The first switch case is default case. Then it will only
match default case. cause not update the lan/wan mac address.
And in the default switch case the param lan_mac is empty.
it will case error message 'arithmetic syntax error' when
call macaddr_add function.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 40910
2014-06-02 12:43:04 +00:00
813a7c3827
ralink: Add support for samsung cy-swr1100 wireless router
...
It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 40908
2014-06-02 12:42:52 +00:00
efd09832fe
ramips: Support for Teltonika RUT5XX
...
Hi Hartmut,
Thanks for your feedback, I have reformated the patch accordingly.
Added support for Teltonika RUT5XX hardware.
Signed-off-by: Steffen Weinreich <steve@weinreich.org>
SVN-Revision: 40907
2014-06-02 12:42:48 +00:00
583b908bc7
ralink: Enable Asus RT-N10+ in menuconfig targets
...
This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk).
Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org>
SVN-Revision: 40903
2014-06-02 12:41:45 +00:00
4a7a0d2536
ralink: add dir-645 to the eeprom hotplug script
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40561
2014-04-23 07:52:56 +00:00
720a0a1df1
ramips: register clock device for the WMAC on RT3883
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40557
2014-04-23 07:51:57 +00:00
cd5f3584e2
ramips: Add support for the 7Links PX-4885 wireless router.
...
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
SVN-Revision: 40554
2014-04-22 08:08:51 +00:00
284ada8a3e
ramips: build factory-compatible image for AR725W
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40552
2014-04-22 08:08:42 +00:00
cb91087991
ramips: add Airlink101 AR725W userland support
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40550
2014-04-22 08:08:35 +00:00
2b2d274bfa
ramips: Add Airlink101 AR725W board support
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40549
2014-04-22 08:08:31 +00:00
010dcd092f
ralink: add port_init for rt2880
...
Forgotten patch to fix ethernet for rt2880.
Based on previously submitted patch from Claudio.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40504
2014-04-13 18:01:08 +00:00
7ae1d573ae
Fix Asus rt-n15 board support
...
* gpio leds and buttons
* ethernet
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40494
2014-04-12 21:22:04 +00:00
3d6ba83fe4
rt2880 DT fixes
...
* add pinctrl
* fix ethernet port
* make wifi available by default
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40493
2014-04-12 21:22:00 +00:00
fa86c30538
Fix pinmux-rt2880
...
The last arg to FUNC() is count, not last pin.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40492
2014-04-12 21:21:56 +00:00
73160c1ad6
Add wmac clock for rt2880
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40491
2014-04-12 21:21:53 +00:00
72803e0e27
Don't try to generate whr-g300n image if it's going to be more than 4M
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40489
2014-04-12 21:21:44 +00:00
d2812cb036
kernel: update 3.10 to 3.10.36
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
f1e31f8266
ralink: fix WHR-300HP2 mtd size
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40419
2014-04-07 15:10:26 +00:00
8f41856f1f
ramips: fix regression from r39949 ( #15382 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40391
2014-04-06 00:09:50 +00:00
5b6ceab69b
ralink: fix chuncked-io module
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40342
2014-03-30 19:03:55 +00:00
627baa28d3
kernel: update 3.10 to 3.10.34
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
4835ea949f
ralink: add missing OF node
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39950
2014-03-18 19:22:13 +00:00
332b94fbd5
ralink: refresh patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39949
2014-03-18 19:21:56 +00:00
375e02ac3d
ralink: add missing clk_set_rate()
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39896
2014-03-12 19:33:01 +00:00
96fa58bafd
ralink: add support for wrtnode
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39786
2014-03-07 09:54:59 +00:00
f677b1bc7e
kernel: update 3.10 to 3.10.32
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
b56bef28d7
ralink: add support for na930
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39611
2014-02-18 13:33:25 +00:00
55383946dc
ralink: add gpio_uartf mux group
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39610
2014-02-18 13:33:20 +00:00
363512b8c6
ralink: fix the gpio mode mapping
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39609
2014-02-18 13:33:16 +00:00
a2543d72d8
kernel: update 3.10 to 3.10.28
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
ebaa3817a7
ralink: activate xhci config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39330
2014-01-19 17:27:31 +00:00
a818a3cf8f
ralink: backport various fixes from linux-mti
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39329
2014-01-19 17:27:22 +00:00
a75b692557
ralink: add xhci driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39328
2014-01-19 17:27:13 +00:00
f3a243c3dd
ramips: Add profile for the Edimax BR-6475nD
...
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>
SVN-Revision: 39299
2014-01-15 18:29:51 +00:00
beb29461ff
ramips: Add userspace support for the Edimax BR-6475nD
...
The rt2x00 wifi driver may still need updating to
function with this device.
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>
SVN-Revision: 39298
2014-01-15 18:29:44 +00:00
62dd252b86
ramips: rt3883: Fix a typo in rt3883.dtsi
...
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>
SVN-Revision: 39297
2014-01-15 18:29:03 +00:00
9821ce8ed6
ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39248
2014-01-12 17:26:24 +00:00
03ef20ce6f
ralink: fix eeprom loading
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39245
2014-01-12 14:03:15 +00:00
4282d796ea
ralink: fix WHR-600D and WHR-300HP image generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39241
2014-01-12 12:12:58 +00:00
a7f53759f5
ralink: fix WHR-600D pcie support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39240
2014-01-12 12:12:53 +00:00
3a64ddd0a1
ralink: add HLK-RM04 support
...
https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39237
2014-01-12 12:07:40 +00:00
aa2be01076
ralink: switch to askconsole
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39236
2014-01-12 12:07:34 +00:00
665c51935e
ralink: fix uartf memory range size
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39235
2014-01-12 12:07:30 +00:00
6278a892d8
ralink: honour memory@0 node
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39234
2014-01-12 12:07:26 +00:00
0ac291d073
ralink: fix rt5350 ethernet
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39233
2014-01-12 12:07:20 +00:00
0e2586a774
kernel: update 3.10 to 3.10.26
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
9715b61b3c
ralink: fix tso regression in the ethernet driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39168
2013-12-27 21:14:49 +00:00
9739a0b41b
ramips: add support for RT-N14U (mt7620n based) board
...
added dts file and userspace scripts modified to support Asus RT-N14U board
current support status:
usb works
ethernet works
buttons reset, wps
leds asus:blue:[usb|lan|wan|air|power]
i2c not tested
uart not tested
wifi not yet
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 39163
2013-12-25 17:04:50 +00:00
93d8dc870e
ramips: add gpio pin 72 in mt7620 chips to dtsi files
...
describes register set to control last gpio pin on mt7620 platfrom
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 39162
2013-12-25 17:04:34 +00:00
6218da5a41
ralink: fix dir810 networking
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39093
2013-12-16 10:16:33 +00:00
952db22551
kernel: update kernel 3.10 to 3.10.24
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
b4b0a55aab
ralink: add mt7621 support
...
there are still various missing pieces for full support.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39040
2013-12-13 10:53:34 +00:00
0ef939c93b
ralink: add TSO
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39019
2013-12-09 17:29:29 +00:00
09a933ed73
ralink: fix typo in gpio irq handling
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39018
2013-12-09 17:29:24 +00:00
a65c9e5b20
ralink: add mt7620a gdma info to dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39017
2013-12-09 17:29:19 +00:00
d203784841
ralink: add asoc modules
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39016
2013-12-09 17:29:14 +00:00
be10895651
ralink: add partially working asoc driver. codec is not fully functional yet
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39015
2013-12-09 17:29:08 +00:00
231eca9375
ralink: add helper that identifies the mt7620 ECO
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39014
2013-12-09 17:29:03 +00:00
833943b410
ralink: add dma engine support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39013
2013-12-09 17:28:43 +00:00
f1ef0b92be
kernel: update 3.10 to 3.10.21
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
2370126b9b
ramips: Fix initial network configuration for few boards
...
Argus ATP52B: ethernet didn't work because of unconfigured switch
Sparklan WCR150GN: add switch config and make single port to be LAN
Dlink DIR-645: seems to be a redundant case
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 38960
2013-11-30 08:36:56 +00:00
f8fe6a090a
ramips: Fix dts typos
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 38959
2013-11-30 08:36:47 +00:00
bb2b428a5c
ralink: dts fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38917
2013-11-26 09:51:57 +00:00
6295f38c8f
ralink: add mac address detection for Asus RT-G32 b1
...
http://patchwork.openwrt.org/patch/4463/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38910
2013-11-25 14:09:08 +00:00
93e9a71538
base-files: allow users to delect debug level during boot
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38909
2013-11-25 08:34:55 +00:00
8ee2b91ddd
ralink: fix up the mt7530 driver to work properly with gmac2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38905
2013-11-25 08:34:23 +00:00
d84238ad26
ralink: add LRO support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38904
2013-11-25 08:34:12 +00:00
f732ed4500
ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X family
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38903
2013-11-25 08:34:01 +00:00
5b437e204f
ralink: set the mac addr via the dts file
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38902
2013-11-25 08:33:42 +00:00
d175740783
ralink: set wmr-300 mac properly
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38872
2013-11-19 21:13:24 +00:00
40109bb89b
ralink: add missing CONFIG_ symbol to mt7620n
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38867
2013-11-19 16:33:43 +00:00
82e6242798
ralink: add support for ralink mt7620 nand eval board
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38848
2013-11-18 09:35:41 +00:00
a17e5159ac
ralink: improve mt7620n detection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38847
2013-11-18 09:35:32 +00:00
f307b35c8b
ralink: add mt7620 nand driver
...
This is a minor rework of the SDK driver. This driver needs a full rewrite.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38846
2013-11-18 09:35:23 +00:00
9d4eb0ac91
ralink: make all none 3x5x boards default to a vlan1/2 setup
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38845
2013-11-18 09:35:14 +00:00
3d547b740a
ralink: make usb work on the mt7530 eval kit
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38844
2013-11-18 09:34:46 +00:00
269cbfa06a
ralink: add mt7620n dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38829
2013-11-17 13:22:01 +00:00
5c2e867460
ramips: fix wmr300 network detection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38828
2013-11-17 13:14:46 +00:00
dce9b292bf
ralink: add mt7620n support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38823
2013-11-16 20:28:52 +00:00
9aca892304
ramips: use dd bs=4096k instead of bs=4M to make it more portable
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38806
2013-11-14 19:16:04 +00:00
682e134b02
ramips: select kmod-rt2800-soc by default (if available)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38784
2013-11-13 10:29:10 +00:00
191af20982
ramips: use gpio-button-hotplug in favour of the input variant
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38735
2013-11-11 13:40:20 +00:00
33111eff95
ramips: make the rfkill switch work on fonera20n
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38734
2013-11-11 13:40:17 +00:00
3de4bdc36f
ralink: revert 38348 as it breaks network on the hame-mpr
...
https://dev.openwrt.org/changeset/38348
https://dev.openwrt.org/ticket/14403#comment:1
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38669
2013-11-07 12:45:52 +00:00
4bb29e9df6
ralink: fix c&p error in gpio driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38668
2013-11-07 12:45:48 +00:00
35656042f1
kernel: update 3.10 to 3.10.18
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
379b509362
ramips: enable building of TEW-692GR images
...
The TEW-692GR images are missing since r36169. Uncomment
the board specific macro in image/Makefile, in order to
generate those again.
Only build tested. No idea if the the image works or not,
I have bricked my TEW-692GR a few months ago.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38603
2013-10-30 07:06:24 +00:00
dfd4311355
ramips: fix number of GPIOs for RT3352
...
The RT3352 SoC only supports 46 GPIO lines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38602
2013-10-30 07:06:23 +00:00
9186fb342e
ramips: remove trailing whitespaces from .dts{,i} files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38601
2013-10-30 07:06:22 +00:00
176b41d441
ralink: add package for mt7620 sdhci
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38553
2013-10-28 06:47:56 +00:00
36e029b3eb
ralink: dont include mt7620 sdhci support inside the kernel
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38552
2013-10-28 06:47:48 +00:00
7c7225a19d
ralink: add support for missing mt7620 mux values
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38551
2013-10-28 06:47:39 +00:00
43de7c1cfa
ralink: add support for 2 new mt7620 boards made by buffalo
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38550
2013-10-28 06:47:31 +00:00
849f74f930
ralink: pinctrl fix for non muxed pins
...
Pins with no mux option failed to be recognized as gpios.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38540
2013-10-26 12:24:55 +00:00
b6b06000eb
kernel: update 3.10 to 3.10.17
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
9a97c56535
ralink: fix default vlan mapping for MT7620a_MT7610e
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38418
2013-10-15 14:56:49 +00:00
81e2f00367
kernel: update kernel to 3.10.15
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
b93e5498ae
ralink: fixes mpr a1/a2 network setup
...
Signed-off-by: Suschman <suschman@gmx.net>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38348
2013-10-09 10:08:52 +00:00
e382d2c7e6
ralink: add support for the mt7530 eval board
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38345
2013-10-08 21:10:15 +00:00
697bb191b0
ralink: add missing header file to mt7530 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38344
2013-10-08 21:10:00 +00:00
c903de043e
ralink: fix asiarf image generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38324
2013-10-07 15:02:44 +00:00
ddcb800018
ralink: split mt7530 driver out of the gsw driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38323
2013-10-07 15:02:39 +00:00
c077698e38
ralink: build recovery images for dcs930 ip cam
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38322
2013-10-07 15:02:35 +00:00
420c62205b
ralink: DIR610A1 Fix remaining issues
...
This patch fixes:
- Ethernet and Wireless LEDs
- Wireless MAC Address
- Remove whitespaces from dts file
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38321
2013-10-07 15:02:31 +00:00
5eacfc1c60
ralink: MT7620 eval board pinmux fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38320
2013-10-07 15:02:27 +00:00
cc58dd26d3
ralink: make cevt systick selectable via kconfig
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38319
2013-10-07 15:02:23 +00:00
baf9d53792
ralink: fix mt7620a pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38318
2013-10-07 15:02:18 +00:00
65bb48cf23
ralink: dts fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38265
2013-09-30 20:48:39 +00:00
52fe1211b3
ralink: fix DIR-320-B1 board detection
...
https://dev.openwrt.org/ticket/14226
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38264
2013-09-30 20:48:34 +00:00
396cb4f405
ralink: Change size of image for DIR-320 B1 to 8MB
...
http://patchwork.openwrt.org/patch/4102/
Signed-off-by: Vladimir Stolyarov <xakep6666@yandex.ru>
SVN-Revision: 38263
2013-09-30 20:48:27 +00:00
9c8a5ef115
kernel: update 3.10 to 3.10.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
a30681dff0
build: unify mips target cflags
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
0380904acb
kernel/3.10: refresh all target patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
76a1617063
ramips: sync 3.10 configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38181
2013-09-25 16:39:23 +00:00
08abb8822b
ralink: make dcs930 uvc camera work
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38054
2013-09-19 05:57:00 +00:00
c0f6bf05f4
ralink: add support for dalink dcs930l ipcam
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38053
2013-09-19 05:56:46 +00:00
898c164b46
ralink: add back dwc_otg driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38052
2013-09-19 05:56:31 +00:00
5722b32acf
ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350
...
https://dev.openwrt.org/ticket/14129
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38040
2013-09-18 16:31:37 +00:00
8cd1c99707
ralink: add pinctrl driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38026
2013-09-17 21:45:44 +00:00
Felix Fietkau
Imre Kaloz
John Crispin
Rafał Miłecki
Luka Perkov
Gabor Juhos
Hauke Mehrtens
