9b2c7be0c4
ramips: important patch for HG255D
...
r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!!
This patch shrink firmware part in mtd layout to exclude origin factory part, and I will prepare another patch to fix the eeprom extract issue for box with origin u-boot.
Signed-off-by: Leon Xu <ylxu72@gmail.com>
SVN-Revision: 37530
2013-07-25 16:01:58 +00:00
3ad136d9e3
ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
...
Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html
Signed-off-by Jon Smirl <jonsmirl@gmail.com>
SVN-Revision: 37521
2013-07-24 08:54:41 +00:00
3f3cac6136
ramips: fix HG255D VLAN initial detect issue
...
Signed-off-by: Leon Xu <ylxu72@gmail.com>
SVN-Revision: 37517
2013-07-23 13:07:00 +00:00
0cc1e2acb4
ramips: Add support for Huawei HG255D in trunk
...
HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them.
This patch is tested to work except trivial LED issues.
Signed-off-by: Leon Xu <ylxu72@gmail.com>
SVN-Revision: 37505
2013-07-22 15:36:39 +00:00
ef944dcb85
kernel: update 3.10 to 3.10.2
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37502
2013-07-22 15:31:13 +00:00
8d0cd50f30
ralink: set remove dwc_otg from default packages and use dwc2 instead
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37499
2013-07-22 13:52:52 +00:00
ffe389c4c5
ralink: remove dwc_otg from modules.mk
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37498
2013-07-22 13:52:44 +00:00
5525b2136e
ralink: set v3.10 as default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37497
2013-07-22 13:52:32 +00:00
b1b4e7db13
kernel: move CONFIG_NET_IP_TUNNEL to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37465
2013-07-19 22:58:01 +00:00
8028fb8096
ramips: add sysupgarde support for wl-330n3g
...
https://dev.openwrt.org/ticket/13891
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37376
2013-07-17 09:44:57 +00:00
dd22304691
ramips: make the old dwc driver depend on v3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37357
2013-07-15 21:06:03 +00:00
072e1a254c
ramips: add v3.10 kernel config files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37356
2013-07-15 21:05:58 +00:00
cb6375c20a
ramips: fix ehci/ohci OF binding
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37354
2013-07-15 21:05:47 +00:00
12a099eb07
ramips: update dtsi files to work with dwc2 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37353
2013-07-15 21:05:42 +00:00
e8ebcffd02
ramips: add a explicit reset to dwc2
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37352
2013-07-15 21:05:36 +00:00
bd78f2b56e
ramips: add a patch to make dwc2 work with boards that have an old bootloader
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37339
2013-07-15 11:34:13 +00:00
a0de18807b
ramips: add ralink v3.10 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37331
2013-07-15 10:06:55 +00:00
f7cf157712
ramips: disable ill_acc driver by default
...
The driver seems to be causoing boot rpoblems on some SoCs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37314
2013-07-14 18:01:00 +00:00
89c0392736
ralink: drop v3.8 support
...
Signed-off-by: John Crispin <blogic@opewnrt.org>
SVN-Revision: 37311
2013-07-14 18:00:34 +00:00
e574f75d16
kernel: update to kernel 3.9.10 and refresh patches
...
SVN-Revision: 37274
2013-07-13 22:43:10 +00:00
099188695a
ralink: vlan offloading is causing problems. disable it
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37203
2013-07-08 16:34:52 +00:00
a6091a5c71
ralink: unbreak ralink i2c support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37202
2013-07-08 09:01:57 +00:00
a154693bab
ralink: add i2c-ralink kmod info
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37200
2013-07-08 09:01:47 +00:00
2da37a713e
ramips: fix RT-N13U gpio buttons
...
https://dev.openwrt.org/ticket/13795
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37163
2013-07-04 13:31:23 +00:00
5986a18c16
ramips: update wlan firmware hotplug script for new eeprom size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37112
2013-06-30 21:03:48 +00:00
0d9f760f27
kernel: update linux 3.9 to 3.9.8
...
Includes memory allocation fixes as well as several networking fixes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
6875316646
ramips: unbreak initramfs generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37080
2013-06-29 08:41:03 +00:00
77b9fd52a6
ramips: fix ethernet driver
...
make sure the driver does not crash under load
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37058
2013-06-28 11:22:11 +00:00
6a4f2922f6
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
36209234ab
ramips: fix rt2x00 ethernet compile bug
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37043
2013-06-27 16:45:40 +00:00
0d4e00c337
ramips: add missing symbols to rt288x config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37042
2013-06-27 16:45:26 +00:00
1706c8d29a
ramips: fix ethernet stability issue introduced by recent kernel upgrade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37041
2013-06-27 16:28:06 +00:00
5063f712a6
ramips: move ESW reset to preinit on RT305x/RT5350
...
RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet
interface, otherwise the driver will panic.
As we already init the ethernet in preinit we therefor need to reset the switch
before that.
Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 37027
2013-06-24 12:39:28 +00:00
d3723f93c6
ramips: make rt3883 usb work properly
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37024
2013-06-24 12:06:56 +00:00
dca18caa79
ramips: revert gpio regulator dts update
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37021
2013-06-24 11:09:50 +00:00
55fb6f3a05
ralink: update patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37016
2013-06-23 15:50:49 +00:00
67f5f188b1
base-files: input/button drivers get loaded before preinit by procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37000
2013-06-21 16:53:47 +00:00
e6ef318802
base-files: diag does not need to insmod any drivers, procd already did it for us
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36999
2013-06-21 16:53:43 +00:00
fc9532aeaa
ramips: add HAME MPR-A2 support
...
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2
Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
SVN-Revision: 36898
2013-06-10 08:24:56 +00:00
30786d2dd0
ramips: add support for belkin F7C027 wemo/homeautomatisation plug
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 36897
2013-06-10 08:24:50 +00:00
1756047518
ramips: set correct description for rt305x subtarget
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36775
2013-05-30 15:59:56 +00:00
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
036fb79052
ramips: drop 3.7 support
...
Signed-off-by; John Crispin <blogic@openwrt.org>
SVN-Revision: 36572
2013-05-07 10:58:44 +00:00
16a17b318a
ramips: properly setup the FEATURES variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36571
2013-05-07 10:58:30 +00:00
bd6e12d904
ramips: fix memory detection rt5350
...
Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 36568
2013-05-06 18:23:56 +00:00
899120ddef
ramips: enable dsp extensions for rt305x and rt3883
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36567
2013-05-06 16:45:59 +00:00
849ff98669
ramips: fix fypo in ethernet driver rt288x, rt3883
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36565
2013-05-06 16:45:43 +00:00
eddd7f5773
ramips: Update ARC Freestation profile
...
These devices are actually built around the 8devices Carambola dev board.
ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History
Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.
- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
actually reports itself as being an RT3350 while still having
RT3050F markings.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36564
2013-05-06 16:45:35 +00:00
John Crispin
Gabor Juhos
Jonas Gorski
Hauke Mehrtens
Felix Fietkau
Florian Fainelli