Commit Graph

712 Commits (99fa07d07e2b34e3040d97909bdae84d7a42cbe4)

Author SHA1 Message Date
Rafał Miłecki 3bdf05441a brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)
SVN-Revision: 43979
2015-01-16 12:48:27 +00:00
Rafał Miłecki 81b8d95f2c brcm47xx: support for flashing CHK and CyberTAN images
This will allow simple sysupgrade-s including simpler reverting to the
original firmware.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43799
2014-12-30 17:19:36 +00:00
Rafał Miłecki cca3990b16 brcm47xx: verify if CHK/CyberTAN contains valid TRX
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43798
2014-12-30 17:19:02 +00:00
Rafał Miłecki c3e9796cd5 brcm47xx: extract magics from specific upgrade images (and still reject them)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43718
2014-12-15 11:09:14 +00:00
John Crispin 019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Rafał Miłecki a5b6b7e419 brcm47xx: detect (and still reject for now) CyberTAN fw format
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43714
2014-12-15 09:59:44 +00:00
Rafał Miłecki b5b4bdc066 brcm47xx: use separated function in upgrade to detect file type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43708
2014-12-15 08:51:14 +00:00
Rafał Miłecki 73237c0c9b brcm47xx: add WNDR3400 V3 buttons
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43579
2014-12-08 17:02:28 +00:00
Felix Fietkau 9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
Hauke Mehrtens 563f963b1b kernel: refresh patches for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
Hauke Mehrtens 8e738da02c brcm47xx: remove kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43535
2014-12-07 15:34:28 +00:00
Rafał Miłecki 1020b84266 brcm47xx: add early support for WNDR3400 V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43532
2014-12-07 00:58:40 +00:00
Rafał Miłecki c84fe94b0d brcm47xx: add support for Netgear WGR614 V10
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43336
2014-11-20 22:15:21 +00:00
Rafał Miłecki ac7e0e69bb brcm47xx: mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43322
2014-11-19 17:35:24 +00:00
Hauke Mehrtens a69ebe234d kernel: update kernel 3.18 to rc4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43229
2014-11-10 22:51:30 +00:00
Hauke Mehrtens e30531cd67 brcm47xx: add config for kernel 3.18
This adds a kernel config for kernel 3.18

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43140
2014-10-31 23:54:33 +00:00
Rafał Miłecki 0100a8a68e brcm47xx: initial support for kernel 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43100
2014-10-28 10:26:00 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
John Crispin 20940138ac scripts: fix wrong usage of '==' operator
[base-files] shell-scripting: fix wrong usage of '==' operator

normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.

this patch does not change the behavior/logic of the scripts.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42911
2014-10-14 12:21:11 +00:00
Rafał Miłecki 746b80f166 brcm47xx: image: create initramfs TRX nodictionary images
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42889
2014-10-13 05:53:33 +00:00
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Hauke Mehrtens 4a9acacf53 kernel: 3.14: update bcm47xxpart
It it used by brcm47xx and bcm53xx targets, so put patches in generic.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42212
2014-08-18 21:57:54 +00:00
Hauke Mehrtens 09739f8ba5 brcm47xx: image: build alternative TRX using less optimized LZMA
There is a group of devices that lzma-loader doesn't work with. They
simply hang at "Starting program at 0x80001000" which is really hard to
debug and we didn't find any solution for this for years.

Broadcom doesn't use lzma-loader on these devices anyway. They decided
to drop lzma-loader and use less optimal LZMA compression that can be
handled by CFE itself (it doesn't use dictionary).

So support these devices we will need kernel compressed with different
parameters and trx without a loader.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42205
2014-08-18 21:00:55 +00:00
Hauke Mehrtens 32b3f9cdc6 brcm47xx/bcm53xx: improve description
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42204
2014-08-18 20:29:26 +00:00
Hauke Mehrtens ade7d7ba8c brcm47xx: update to kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42202
2014-08-18 20:28:21 +00:00
Hauke Mehrtens ba0b904d0b brcm47xx: image: update list of Netgear WNR* firmwares
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42165
2014-08-14 21:22:17 +00:00
Hauke Mehrtens 254b4df66f brcm47xx: fix brcm47xx.legacy build
we should check for ssb here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42164
2014-08-14 21:21:27 +00:00
Hauke Mehrtens 47bab2b654 brcm47xx: fix reboot problem on BCM4705/BCM4785
This adds some code based on code from the Broadcom GPL tar to fix the
reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
times and have never seen a problem. This reverts the changes in the
previous commit and adds the real fix as suggested by Rafał.

Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
async mode.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42088
2014-08-08 23:10:16 +00:00
Hauke Mehrtens 81c2466381 brcm47xx: fix reboot problem on BCM4705/BCM4785
This adds some code based on code from the Broadcom GPL tar to fix the
reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
times and have never seen a problem. This reverts the changes in the
previous commit and adds the real fix as suggested by Rafał.

Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
async mode.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42083
2014-08-08 22:52:28 +00:00
Hauke Mehrtens c371e6de02 brcm47xx: activate high mem for mips74k in the config
It is still not working.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42054
2014-08-07 20:22:00 +00:00
Hauke Mehrtens 4ec288bfa4 brcm47xx: 3.14: backport MIPS patches for early HIGHMEM support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42053
2014-08-07 20:21:11 +00:00
Hauke Mehrtens dc38211cff brcm47xx: 3.10: backport MIPS patches for early HIGHMEM support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42052
2014-08-07 20:20:38 +00:00
Hauke Mehrtens f7b3b7db7d brcm47xx: 3.14: update MIPS patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41911
2014-07-31 21:42:59 +00:00
Hauke Mehrtens 3a82681e4f brcm47xx: 3.10: update MIPS patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41910
2014-07-31 21:40:38 +00:00
Hauke Mehrtens 7a3b3b9d73 brcm47xx: don't create named switch_vlan sections
It doesn't seem to be used anywhere, it's incompatible with other
targets and can be confusing. People may think they need to update
section name every time they change VLAN ID (well, even I was doing
that).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41835
2014-07-26 12:33:48 +00:00
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
Hauke Mehrtens 7435b628c6 brcm47xx: fix switch detection with kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41706
2014-07-17 20:34:18 +00:00
Hauke Mehrtens 1636bc6704 brcm47xx: remove kmod-bgmac from profile
bgmac will be compiled into the kernel since r41594.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41667
2014-07-15 21:57:13 +00:00
Hauke Mehrtens f5955c2e6b brcm47xx: fix LEDs on WRT54GL 1.1
Ticket: #17062
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41666
2014-07-15 21:54:38 +00:00
Hauke Mehrtens 6f417d5b4b brcm47xx: fix special board handling for some devices
Some devices were renamed when converted from diag to in kernel board detection and it was not changed in netconfig. Devices not in the
kernel board detection are removed now.

This should close: #17111, #16968, #13202

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41663
2014-07-14 22:16:19 +00:00
Hauke Mehrtens 7dbea92a9c brcm47xx: improve board detection for some devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41662
2014-07-14 22:03:59 +00:00
Hauke Mehrtens ba54356d49 brcm47xx: deactivate ssb and old phy code for new devices
This deactivates ssb and G-PHY code in b43 for the mips74k profile in
brcm47xx.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41594
2014-07-12 15:39:31 +00:00
John Crispin 32e93efc73 target/linux/*: more dead package cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41571
2014-07-10 20:05:43 +00:00
John Crispin 0f76f8a16e target/linux/*: kmod-fs-ext{2,3} RIP
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41560
2014-07-10 19:16:15 +00:00
Hauke Mehrtens 0a5145e851 brcm47xx: make reboot a more reliable
A reboot is issued by setting the watchdog timer to a low value, when
the value is decreased from 1 to 0 by the hardware the system will
reboot. Setting this value to 1 does not work every time, it is a
little bit more reliable when setting it to 3. This timer runs with
some MHz or KHz so nobody will notice the increased waiting.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41548
2014-07-07 20:12:40 +00:00
Hauke Mehrtens f42c36ea60 brcm47xx: add buttons support for Netgear WNR3500L
Ticket: #14406

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41547
2014-07-07 19:14:22 +00:00
Hauke Mehrtens 4632347879 brcm47xx: remove unneeded images from generic target
broadcom-wl now builds in the mips74k profile, so remove these chips
from the generic profile.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41546
2014-07-07 17:47:24 +00:00
Hauke Mehrtens 3597b7d456 brcm47xx: image: legacy: take over old devices images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41530
2014-07-06 17:21:37 +00:00
Hauke Mehrtens 0eb3c26e7d brcm47xx: image: mips74k: take over some device images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41529
2014-07-06 17:14:29 +00:00
Hauke Mehrtens c3b3df1da8 brcm47xx: image: prepare for using mips74k subtarget
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41528
2014-07-06 17:14:06 +00:00