11c4128770
improve BCM6345 support
...
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control
SVN-Revision: 27880
2011-08-02 18:55:46 +00:00
4e6c93bef1
bcm63xx: Fix SPI commands and register offsets for BCM6348
...
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.
Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>
SVN-Revision: 27774
2011-07-25 19:52:47 +00:00
9c7294f7c7
add ehci support to DWV-S0 board ( #9059 )
...
SVN-Revision: 27622
2011-07-16 08:39:04 +00:00
930485561c
fix GEN_SPI_RSET_BASE macro ( #9697 )
...
SVN-Revision: 27604
2011-07-13 09:33:11 +00:00
00ad56b73e
move board_HW553 inside the ifdef ..BCM6358 .. endif block
...
SVN-Revision: 27484
2011-07-06 10:00:39 +00:00
1141165bb9
Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
...
SVN-Revision: 27471
2011-07-06 06:35:24 +00:00
9dc72505a2
profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
...
SVN-Revision: 27470
2011-07-06 06:35:22 +00:00
7c3bbe150a
hw553: fix missing has_uart0 in board definition ( #9533 )
...
SVN-Revision: 27448
2011-07-04 15:04:58 +00:00
c5821c1a3a
kernel: update kernel to 2.6.39.2
...
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
ca979845cc
kernel: update ssb and bcma to linux-next next-20110627
...
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
3f40c0f7df
remove gpiodev, prefer sysfs gpio
...
SVN-Revision: 27284
2011-06-25 19:26:17 +00:00
f6e4eb15bc
register SSB sprom after ethernet devices
...
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.
SVN-Revision: 27258
2011-06-22 12:32:03 +00:00
5a76c6bdd7
fix tab damage in 141-led_count.patch
...
SVN-Revision: 27254
2011-06-21 20:52:58 +00:00
3f0f8d9c87
fix and make usable kmod-pcmcia-rsrc
...
This module is also needed for e.g: kmod-bcm63xx-pcmcia
SVN-Revision: 27253
2011-06-21 20:52:53 +00:00
9bdf6abb9d
use macros to generate SPI registers table and switches
...
SVN-Revision: 27246
2011-06-21 10:05:51 +00:00
ab74628c10
dev-spi.c checks for running CPU, not board code
...
SVN-Revision: 27236
2011-06-19 20:46:00 +00:00
4dd4cbeb43
fixup patches after r27234
...
SVN-Revision: 27235
2011-06-19 20:28:38 +00:00
7819b530da
remove accidental bcm6345 related patches
...
SVN-Revision: 27234
2011-06-19 20:16:59 +00:00
12db3df666
remove support for 2.6.37 and 2.6.38
...
SVN-Revision: 27233
2011-06-19 20:14:22 +00:00
6bb0a608dc
switch to 2.6.39
...
SVN-Revision: 27232
2011-06-19 20:12:45 +00:00
426dccd019
bcm63xx: Add support for Linux 3.0-rc3
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27192
2011-06-16 14:34:40 +00:00
016e8dee34
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27019
2011-05-27 09:54:52 +00:00
590c82cec1
bcm63xx: Add support for 2.6.38
...
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27018
2011-05-27 09:54:48 +00:00
68cb138154
fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
...
SVN-Revision: 27014
2011-05-26 13:53:00 +00:00
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
2011-05-26 13:52:56 +00:00
2785e3fc12
renumber board patches
...
SVN-Revision: 27012
2011-05-26 12:09:15 +00:00
16dfe8b4d1
add support for BT Voyager 2110 ( #8810 )
...
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959
2011-05-20 10:06:25 +00:00
6c8387fe15
add support for DSL-2640B rev B2
...
Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958
2011-05-20 10:06:22 +00:00
031ea08ef0
refresh patches
...
SVN-Revision: 26957
2011-05-20 10:06:18 +00:00
3e83f60a66
add support for D-Link DVA-G3810BN/TL
...
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956
2011-05-20 10:06:15 +00:00
f0a99c1692
add support for BT Voyager 2500 ( #9070 )
...
SVN-Revision: 26954
2011-05-20 10:06:07 +00:00
acf0ec224f
add support for USR9108 LEDs ( #9372 )
...
SVN-Revision: 26953
2011-05-20 10:06:04 +00:00
9c8a2d5961
bcm63xx: Add support for the T-Home Speedport W 303V
...
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
7d3b735854
bcm63xx: Update support for the DSL-274xB revision C
...
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
2011-05-11 13:33:50 +00:00
0fb1c2d537
bcm63xx: Accept any led with power in its name as power led
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
2011-05-11 13:33:45 +00:00
c6af9c23b7
bcm63xx: Decouple Board ID and image name for fixup
...
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
2011-05-11 13:33:41 +00:00
de02a2795b
fill maintainer infos for a couple of targets
...
SVN-Revision: 26836
2011-05-06 12:37:36 +00:00
fcb1557a3e
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
...
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
3dbb8c5088
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
1fcd26091b
brcm63xx: remove patches/configs for 2.6.35
...
SVN-Revision: 26709
2011-04-17 18:39:46 +00:00
8b18ce6807
Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch.
...
SVN-Revision: 26699
2011-04-17 01:15:47 +00:00
0d722113b9
Generate images for RTA1320_16M-based routers
...
SVN-Revision: 26681
2011-04-15 14:31:36 +00:00
f83c5938d2
bcm63xx: Move the OpenWrt rootfs length field
...
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26680
2011-04-15 12:18:25 +00:00
50c743e79e
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
33b864e899
Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices.
...
SVN-Revision: 26387
2011-03-31 06:16:23 +00:00
aa580d336b
bcm63xx: Really fix the flash driver in 2.6.37
...
Read back the actual rootfs length from the image tag.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25938
2011-03-07 16:55:01 +00:00
9dd1454044
fix patches after 2.6.37 update, patch from KanjiMonster
...
SVN-Revision: 25810
2011-03-01 16:02:38 +00:00
94a22b91fc
add support for 2.6.37, patches from KanjiMonster
...
SVN-Revision: 25629
2011-02-20 19:59:22 +00:00
8cc16aa14e
add support for HW553 bcm6358-based boards ( #8844 )
...
SVN-Revision: 25590
2011-02-19 15:44:06 +00:00
b7f8e1276d
add support for 'MAGIC' bcm6348-based board
...
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.
I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )
Thanks to KanjiMonster for the support on the IRC channel.
Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>
SVN-Revision: 25584
2011-02-19 12:44:27 +00:00
31709b2c76
update to 2.6.35.11
...
SVN-Revision: 25582
2011-02-19 12:44:16 +00:00
2d3ed6dc2d
fix T-Com Speedport W 500V default config
...
The device is called SPW500V, not SP500W.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25431
2011-02-09 13:09:02 +00:00
e75274de89
fix build of brcm-wl
...
The fallback needs to be exported for bcm63xx, too. Runtime tested with a
BCM4322 on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25420
2011-02-08 13:46:12 +00:00
bed53c93d6
give some credits to Tanguy Bouzeloc in the spi driver
...
SVN-Revision: 25133
2011-01-27 02:11:08 +00:00
c6d9ec5173
multiple SPI driver fixes
...
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 24849
2010-12-29 16:19:59 +00:00
dc9c1ac1f7
patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen).
...
SVN-Revision: 24843
2010-12-28 08:10:32 +00:00
5ee2a6c696
patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working.
...
SVN-Revision: 24842
2010-12-28 04:05:04 +00:00
093ebfe217
spi driver: remove bcm_rset usage
...
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced by
"bs->regs" field for all I/O operation.
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 24840
2010-12-28 00:24:50 +00:00
fc3a1d0ba3
Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24838
2010-12-26 04:18:13 +00:00
6ee5411686
base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24836
2010-12-26 04:18:04 +00:00
31f7259e3e
mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24834
2010-12-26 04:17:56 +00:00
44e22cbd49
Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
...
SVN-Revision: 24442
2010-12-10 18:59:58 +00:00
7224337d71
Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.
...
SVN-Revision: 24316
2010-12-08 00:40:31 +00:00
2a86dcc3d6
Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.
...
SVN-Revision: 24315
2010-12-08 00:40:28 +00:00
c6ef9a0720
Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile
...
SVN-Revision: 24314
2010-12-08 00:40:24 +00:00
f8ed133c0a
patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.
...
SVN-Revision: 24310
2010-12-07 17:32:29 +00:00
0e839ea40d
Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T."
...
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.
It belongs in generic not brcm63xx.
SVN-Revision: 24308
2010-12-07 17:02:31 +00:00
183d628485
patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise
...
SVN-Revision: 24307
2010-12-07 16:42:23 +00:00
8f9b14dafe
boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
...
SVN-Revision: 24305
2010-12-07 15:15:54 +00:00
3baa168e09
patches: Refreshed patches after led_count
...
SVN-Revision: 24304
2010-12-07 15:15:51 +00:00
b963cbde33
board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit
...
SVN-Revision: 24303
2010-12-07 15:15:47 +00:00
e5ca4d81f4
Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
...
SVN-Revision: 24302
2010-12-07 15:15:41 +00:00
ad24e14b35
base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
...
SVN-Revision: 24276
2010-12-06 06:46:03 +00:00
244db5ac6a
board definition: Fixed CPVA642 LED definitions
...
SVN-Revision: 24275
2010-12-06 06:45:57 +00:00
8316194016
board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz
...
SVN-Revision: 24274
2010-12-06 04:31:23 +00:00
7129521696
base-files: Added network defconfig because board only has one ethernet (4-port switch)
...
SVN-Revision: 24273
2010-12-06 02:01:08 +00:00
9677b65cb6
image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
...
SVN-Revision: 24191
2010-11-28 22:13:00 +00:00
314bce63e6
bcm63xx: Add support for the T-Com Speedport W 500V.
...
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24190
2010-11-28 22:04:44 +00:00
3a49f669f2
bcm63xx: Add board id override fixup.
...
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.
Also modify the image generation to generate apropriately tagged images.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24189
2010-11-28 22:04:40 +00:00
c51d772e62
bcm63xx: Finalize support for DSL-274xB, rev C2.
...
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24188
2010-11-28 22:04:36 +00:00
8fa9b24a4c
bcm63xx: Allow 'colored' power leds.
...
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24187
2010-11-28 22:04:30 +00:00
fec30c8c80
bcm63xx: Don't hardcode the switch ethernet interface in preinit.
...
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24186
2010-11-28 22:04:26 +00:00
b1b318750a
bcm63xx: Add defconfigs.
...
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24185
2010-11-28 22:04:19 +00:00
ead8ab8403
update to the latest stable kernels
...
SVN-Revision: 24136
2010-11-24 18:50:11 +00:00
195d1d7446
image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
...
SVN-Revision: 24127
2010-11-24 11:06:13 +00:00
0c0c1f017f
image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.
...
SVN-Revision: 24118
2010-11-23 20:17:08 +00:00
049e59a27b
Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known).
...
SVN-Revision: 24040
2010-11-19 13:41:54 +00:00
eadb5c84fa
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
...
SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
7583fe8668
Add wps button on alice gate
...
SVN-Revision: 23903
2010-11-06 21:08:44 +00:00
0a5da348d1
update kernels to 2.6.32.25 and 2.6.35.8
...
SVN-Revision: 23851
2010-11-04 09:01:08 +00:00
ffc84cf75c
register uart driver on livebox ( #8013 )
...
SVN-Revision: 23653
2010-10-27 10:02:13 +00:00
7bf5647070
refresh 2.6.35 patches
...
SVN-Revision: 23652
2010-10-27 10:02:08 +00:00
697d3e7066
Fix nxp_74hc164 driver compile error (builbot)
...
SVN-Revision: 23623
2010-10-24 16:10:41 +00:00
20d28f7685
fix platform_devices registration
...
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 23517
2010-10-18 19:49:54 +00:00
af0e5167bc
add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558 )
...
SVN-Revision: 23508
2010-10-17 17:45:50 +00:00
9d9e3fed62
remove 2.6.32 support
...
SVN-Revision: 23505
2010-10-17 16:32:35 +00:00
a1ea84dbb6
fix SPI driver, move register out of driver code
...
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com
SVN-Revision: 23504
2010-10-17 14:09:30 +00:00
1a13c39f76
restore kernel oldconfig
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23503
2010-10-17 14:09:24 +00:00
265bf2ccb0
refresh patches
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23502
2010-10-17 14:09:04 +00:00
9f4c51acb7
refresh nb4 support. Register 74x164 device
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23501
2010-10-17 14:08:57 +00:00
8cbd9d5a2e
add spi devices board info int bcm63xx_boards
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23500
2010-10-17 14:08:51 +00:00
b65e494976
add 74x164 SPI chip support
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23499
2010-10-17 14:08:45 +00:00
cd9b90235c
backport SPI master with no RXTX support (from 2.6.36)
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23498
2010-10-17 14:08:39 +00:00
d5854cfd4d
register earlier extended platform devices
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23497
2010-10-17 14:08:34 +00:00
83d6a36019
update 2.6.35.x to 2.6.35.7
...
SVN-Revision: 23213
2010-10-04 07:42:32 +00:00
bbca651e1b
remove wpa-supplicant and iw from the Tecom GW6x00 profile
...
SVN-Revision: 23051
2010-09-13 08:30:35 +00:00
d3e206ad96
default to using 2.6.35
...
SVN-Revision: 23038
2010-09-12 21:23:53 +00:00
dc1302fdf9
remove 2.6.33 support
...
SVN-Revision: 23037
2010-09-12 21:23:47 +00:00
327ac42dca
change the Tecom GW6x00 profile to use wl instead of b43
...
SVN-Revision: 23036
2010-09-12 21:23:41 +00:00
f4f789f211
register udc and spi devices at the correct init level
...
SVN-Revision: 23035
2010-09-12 21:23:35 +00:00
fab2e77357
refresh 2.6.35 patches
...
SVN-Revision: 23034
2010-09-12 21:23:29 +00:00
867ac59ff9
enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx
...
SVN-Revision: 22846
2010-08-30 22:59:20 +00:00
2e343d9760
add 2.6.35 support
...
SVN-Revision: 22800
2010-08-25 19:56:08 +00:00
b1becffa5b
update to 2.6.32.20
...
SVN-Revision: 22766
2010-08-22 17:07:37 +00:00
a5fdf57a1b
base-files: diag.sh: For power button as preinit status led, end with led left on, not off
...
SVN-Revision: 22466
2010-08-02 19:33:08 +00:00
d391ca2c8c
base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit
...
SVN-Revision: 22465
2010-08-02 19:32:59 +00:00
99d0f9ea05
patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32
...
SVN-Revision: 22464
2010-08-02 19:32:40 +00:00
00cc52f14b
reorder profiles
...
SVN-Revision: 22390
2010-07-26 18:58:35 +00:00
7831006360
fix a typo in 040-bcm963xx_flashmap.patch
...
SVN-Revision: 22386
2010-07-25 00:10:37 +00:00
ca8f45b142
update kernel versions
...
SVN-Revision: 22289
2010-07-19 11:34:03 +00:00
f6935a4bdb
fix alice gate2 internet:green led ( #6743 )
...
SVN-Revision: 22273
2010-07-18 10:29:44 +00:00
abdf25b045
add required exports for wl.ko
...
SVN-Revision: 22174
2010-07-13 17:03:56 +00:00
2d86ea7bf3
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
...
SVN-Revision: 22145
2010-07-12 14:06:13 +00:00
1650f33f97
add a wifi profile for proprietary wl
...
SVN-Revision: 22009
2010-07-01 01:39:04 +00:00
fb94196462
add missing alice gate2 leds ( #6743 )
...
SVN-Revision: 21785
2010-06-13 12:20:53 +00:00
145fd381d7
do not override cfg80211-related config symbols
...
SVN-Revision: 21769
2010-06-12 18:10:16 +00:00
9bc1e548a1
generic: move more common options to generic configuration
...
* CONFIG_ABX500_CORE
* CONFIG_ATOMIC64_SELFTEST
* CONFIG_BRIDGE_IGMP_SNOOPING
* CONFIG_CAIF
* CONFIG_CEPH_FS
* CONFIG_CRYSTALHD
* CONFIG_DEFAULT_SECURITY_SELINUX
* CONFIG_DEFAULT_SECURITY_SMACK
* CONFIG_DEFAULT_SECURITY_TOMOYO
* CONFIG_DT3155
* CONFIG_IP_MROUTE_MULTIPLE_TABLES
* CONFIG_L2TP
* CONFIG_LOGFS
* CONFIG_LPC_SCH
* CONFIG_MFD_JANZ_CMODIO
* CONFIG_MFD_RDC321X
* CONFIG_N_GSM
* CONFIG_RAMOOPS
* CONFIG_SERIAL_ALTERA_JTAGUART
* CONFIG_SERIAL_ALTERA_UART
* CONFIG_SERIAL_TIMBERDALE
* CONFIG_SM_FTL
* CONFIG_SQUASHFS_XATTRS
SVN-Revision: 21750
2010-06-10 10:45:51 +00:00
2f328ce488
generic: move some common symbols to generic configuration
...
* CONFIG_MUTEX_SPIN_ON_OWNER
* CONFIG_DEFAULT_HYDLA
* CONFIG_DEFAULT_VENO
SVN-Revision: 21748
2010-06-10 08:58:14 +00:00
5cad9d5c73
generic: standardize CONFIG_INLINE_* symbols usage
...
SVN-Revision: 21746
2010-06-10 08:09:41 +00:00
f296eeab53
brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design)
...
SVN-Revision: 21631
2010-05-30 02:04:56 +00:00
6a267cfa76
brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods
...
SVN-Revision: 21630
2010-05-30 01:44:37 +00:00
40c53c6556
brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00)
...
SVN-Revision: 21629
2010-05-30 01:33:20 +00:00
82edb6eafa
brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00)
...
SVN-Revision: 21628
2010-05-30 01:33:09 +00:00
cc8fba8441
brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00)
...
SVN-Revision: 21627
2010-05-30 01:32:58 +00:00
bd8cfa63f4
brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00)
...
SVN-Revision: 21626
2010-05-30 01:32:47 +00:00
e74e289fa8
update linux kernel to 2.6.32.14
...
SVN-Revision: 21583
2010-05-27 18:09:09 +00:00
46e2eea1ef
target/linux: refresh 2.6.32 patches
...
SVN-Revision: 21566
2010-05-24 20:35:46 +00:00
b18a1d217b
kernel: update kernel to version 2.6.32.13 and 2.6.33.4
...
SVN-Revision: 21540
2010-05-23 13:16:51 +00:00
f89ff525ee
revert r21085, fixes #7282
...
SVN-Revision: 21352
2010-05-04 08:07:39 +00:00
1017215649
do not write to per-port over-current register, which is bogus ( #6898 )
...
SVN-Revision: 21306
2010-05-02 19:14:10 +00:00
f87eac79bb
rename reset_buttons to buttons
...
SVN-Revision: 21255
2010-04-29 12:54:24 +00:00
ccfe1f7886
add WPS button support for nb4 boards
...
SVN-Revision: 21254
2010-04-29 12:51:41 +00:00
b29ef93886
fix gpio button key code, match button-hotplug code
...
SVN-Revision: 21253
2010-04-29 12:51:02 +00:00
5af6e7724b
fix gpio_button device register
...
SVN-Revision: 21252
2010-04-29 12:50:09 +00:00
73e450f44a
fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel
...
SVN-Revision: 21231
2010-04-28 12:30:32 +00:00
1a07f81239
extend bcm63xx_wdt driver for debugging purposes, thx Miguel
...
SVN-Revision: 21199
2010-04-27 15:45:03 +00:00
fdac9ae836
sync to kernel 2.6.32.12
...
SVN-Revision: 21195
2010-04-27 14:30:08 +00:00
8df378a918
add neufbox 4 board support, thx Miguel & Florian
...
SVN-Revision: 21193
2010-04-27 13:49:31 +00:00
266c0bf900
add NXP 74HC164 chip driver support, thx Miguel & Florian
...
SVN-Revision: 21192
2010-04-27 13:48:26 +00:00
cf1654354b
add extended platform devices patch, thx Miguel & Florian
...
SVN-Revision: 21191
2010-04-27 13:46:22 +00:00
Florian Fainelli
Jonas Gorski
Daniel Dickinson
Hauke Mehrtens
Felix Fietkau
Imre Kaloz
Claudio Mignanti
Lars-Peter Clausen
Jo-Philipp Wich
Gabor Juhos
Nicolas Thill
Raphaël Huck
Alexandros C. Couloumbis