aaa20ae2c2
bcm53xx: update USB 3.0 driver with version submitted upstream
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47248
2015-10-23 22:32:38 +00:00
5682b0d954
bcm53xx: use Broadcom's proposed SMP implementation
...
This replaces our SMP implementation with a very similar version which
is Broadcom currently trying to get into mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47247
2015-10-23 22:29:05 +00:00
dc01c61664
bcm53xx: Add BCM SVK DT files
...
Add device tree files for Broadcom Northstar based SVKs. Since the
bcm5301x.dtsi already exists, all that is necessary is the dts files to
enable the UARTs. With these files, the SVKs are able to boot to shell.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47246
2015-10-23 22:26:49 +00:00
99a468a9dd
bcm53xx: remove support for kernel 3.18
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47198
2015-10-17 11:49:01 +00:00
0cd478518f
kernel: update 4.1 to 4.1.10
...
Fixes a regression on spi flash devices (upstream commit 1583eaece6fa).
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.7
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.8
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.9
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.10
096-ipv4-off-by-one-in-continuation-handling-in-proc-net.patch was applied
upstream and dropped.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
[update from 4.1.9 to 4.1.10]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47104
2015-10-04 11:34:39 +00:00
c6401c6d61
bcm53xx: add early support for Linksys EA6300 V1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47052
2015-09-26 22:57:33 +00:00
41f9b5e42e
bcm53xx: add NAND flash chip description for Asus RT-AC87U
...
This should fix #20492 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46892
2015-09-12 11:10:34 +00:00
450aebcdce
bcm53xx: reorder some arch patches
...
This moves arch patches affecting many DTS files. Thanks to this change
we can put some ready-to-mainline patches at 300-319 and simplify
backporting process.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46889
2015-09-11 22:36:05 +00:00
b075d5e734
bcm53xx: update to kernel 4.1
...
This makes bcm53xx use kernel 4.1 by default now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46877
2015-09-11 18:52:18 +00:00
f87990840d
bcm53xx: support sysupgrade with Netgear R7000 original firmware
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46732
2015-08-26 15:21:14 +00:00
8f77e9f668
bcm53xx: add OpenWrt specific stuff for Netgear R7000
...
This adds DT things that couldn't be upstreamed yet.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46731
2015-08-26 15:21:07 +00:00
36a8075d90
bcm53xx: use pending Netgear R7000 patch
...
It includes support for LEDs and buttons.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46730
2015-08-26 14:51:47 +00:00
1111782e20
bcm53xx: use backported patches for UART0 and profiling
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46729
2015-08-26 14:39:06 +00:00
6856535e29
kernel: move linux, part-probe dt parsing in generic code
...
The "linux,part-probe" dts parsing is a pretty neat generic feature.
It has been posted to kernel.org and could easily be reused by all
targets.
This change moves the patch to the 3.18 and 4.1 generic folders, and
makes the feature available to all platforms who may want to use it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46654
2015-08-17 06:17:37 +00:00
4ecae78c16
image.mk: replace all Build/netgear-chk with a generic implementation
...
Instead of letting each target define it themselves, create on in
include/image.mk and let the targets use it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46596
2015-08-14 13:05:14 +00:00
b6abb59975
bcm53xx: prefix netgear specific device variables with NETGEAR_
...
Rename BOARD_ID to NETGEAR_BOARD_ID and REGION to NETGEAR_REGION.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46593
2015-08-14 13:03:36 +00:00
a5c3407474
bcm53xx: allow device tree to override SPI flash partition layout
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46538
2015-07-31 20:55:30 +00:00
ac96a1665a
bcm53xx: update Disable MMU and Dcache during decompression
...
This replaces the old patch with the version from Florian.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46504
2015-07-26 15:52:59 +00:00
91abbde594
bcm53xx: update config
...
This activates CONFIG_MULTIUSER and sets the maximal number of cpus to 2.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46500
2015-07-26 15:51:37 +00:00
60cecc6fa5
bcm53xx: fix usb3 build with kernel 4.1
...
One argument was removed with kernel 4.1 from xhci_handshake() which
caused a compile error.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46369
2015-07-14 18:51:23 +00:00
cf93a8f227
bcm53xx: add early support for Netgear R7000
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46363
2015-07-14 10:25:46 +00:00
29039f51b3
kernel: refresh patches on linux 3.18
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46308
2015-07-12 13:47:16 +00:00
901a7fa067
kernel: update 3.18 to 3.18.17
...
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46150
2015-06-30 23:26:09 +00:00
cc758e7de0
bcm53xx: port last 2 UART patches to 4.1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46141
2015-06-29 06:59:45 +00:00
d3544a20a8
bcm53xx: rework patch enabling UART support
...
Follow upstream patch and handle it using &uart0. Also disable &uart1 as
it's most likely unused. This will allow us to get valuable reports and
upstream these changes.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46140
2015-06-29 06:48:41 +00:00
099f3cb7ec
bcm53xx: use UART serial DT patch sent upstream
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46139
2015-06-29 06:48:08 +00:00
52e042ea55
bcm53xx: add upstream nand driver
...
This adds the upstream Broadcom nand driver and makes use of it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46131
2015-06-25 22:00:36 +00:00
164e82099d
bcm53xx: add upstream PCIe driver
...
This patch adds the missing parts to use the upstream Broadcom PCIe
driver and makes use of it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46130
2015-06-25 21:56:34 +00:00
ca49bcadae
bcm53xx: add arm l2c overwrite options like in mainline kernel
...
Instead of setting the l2c_aux_val variable in the board code make it
possible to set these through device tree and make use of that.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46129
2015-06-25 21:43:16 +00:00
37fb5ab893
bcm53xx: add support for kernel 4.1
...
This only removes the patches already applied upstream and makes the
rest apply cleanly.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46128
2015-06-25 21:33:53 +00:00
b0cdcf4e93
bcm53xx: respect ACTIVE_LOW when powering USB using GPIO
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46088
2015-06-21 16:47:05 +00:00
90d425039b
bcm53xx: enable USB power on Buffalo WZR-1750DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46087
2015-06-21 16:26:23 +00:00
0049d0ca75
bcm53xx: update SPROM driver to include just-sent patch
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46086
2015-06-21 14:26:03 +00:00
167a2dc12e
bcm53xx: enable USB power on Netgear R6250
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46083
2015-06-21 11:09:49 +00:00
64d3e52ad0
bcm53xx: update xHCI patch
...
This drops some debugging pr_info and adds platform_device_unregister.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46082
2015-06-21 11:09:30 +00:00
63bc66cfcd
bcm53xx: fix enabling GPIO-controlled USB power
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46081
2015-06-21 10:18:52 +00:00
b3afbe4918
bcm53xx: add xHCI support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46080
2015-06-21 10:18:43 +00:00
9a59b350b7
kernel: update 3.18 to 3.18.16
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
351a2ec15f
bcm53xx: use USB patches sent upstream by Hauke
...
This stabilizes USB support. The old patch was handling initialization
in a different order that was causing some problems with few USB 3.0
devices. Some weren't detected, some were working unstable, sometimes
USB 3.0 could hang the whole controller.
A still known issue (but not a regression) is controller hang triggered
by connecting USB 1.1 device when not having OHCI controller enabled
(kmod-usb-ohci).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45997
2015-06-16 08:28:46 +00:00
950c0191c2
bcm53xx: update NVRAM driver to MIPS version from upstream-sfr
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45943
2015-06-10 20:34:32 +00:00
e011a5c375
bcm53xx: backport the latest 4.2 ARM BCM5302X patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45922
2015-06-07 14:41:05 +00:00
2364dd9331
bcm53xx: refresh kernel config
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45916
2015-06-06 22:34:37 +00:00
46a25c6e8a
bcm53xx: fallback to default_do_upgrade if NAND upgrade fails
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45915
2015-06-06 17:52:53 +00:00
3d4f163df1
bcm53xx: sysupgrade: drop useless shift in platform.sh
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45914
2015-06-06 17:26:05 +00:00
54fb91f0cf
bcm53xx: extract TRX from image on the fly
...
Extracting TRX to separated file in /tmp/ just wastes some RAM while we
can just pass a proper extracting command to the default_do_upgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45912
2015-06-06 17:23:03 +00:00
5e90144aec
bcm53xx: sysupgrade: extract TRX partitions directly from vendor image
...
Extracting full TRX out of vendor format is not needed as otrx supports
passing TRX offset. This saves some RAM during sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45911
2015-06-06 17:05:31 +00:00
48da51ed03
bcm53xx: update NVRAM driver to support getting contents
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45907
2015-06-05 21:49:57 +00:00
9845d729a9
bcm53xx: build images for Asus devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45790
2015-05-27 16:20:06 +00:00
47eca7a1ca
bcm53xx: add OHCI (USB 1.1) support
...
There is also a OHCI controller, activate it for USB 1.1 support.
This should close #19601 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45716
2015-05-23 14:54:44 +00:00
76d079204d
kernel: update 3.18 to 3.18.14
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14
Build tested on brcm63xx and ipq806x, runtested on brcm63xx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
63bb7c51db
bcm53xx: add Asus RT-AC87U partitioning hacky workaround
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45694
2015-05-17 12:10:38 +00:00
75b8e247e3
bcm53xx: try to fix network on Asus RT-AC87U
...
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).
One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45692
2015-05-16 17:14:25 +00:00
ab83610563
bcm53xx: use backported Asus RT-AC87U DT patch
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45691
2015-05-16 15:44:00 +00:00
abed46aacc
bcm53xx: enable RT-AC87U UART console
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 45690
2015-05-16 11:45:52 +00:00
3dd9274332
bcm53xx: add support for SmartRG SR400ac
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45686
2015-05-13 20:01:15 +00:00
b4ecf19faa
bcm53xx: replace DT patches with backports from stblinux
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45685
2015-05-13 20:01:03 +00:00
af019cad56
bcm53xx: use of_machine_is_compatible helper in b53 fix
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45684
2015-05-13 14:34:23 +00:00
afb98aea4d
bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45683
2015-05-13 13:12:57 +00:00
610ee0d85a
bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45682
2015-05-13 13:11:17 +00:00
2d3aaa2d2f
bcm53xx: fix default network interface on Netgear R8000
...
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45681
2015-05-13 13:11:04 +00:00
45ec92fa30
bcm53xx: bgmac: add support for the 3rd core
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45680
2015-05-13 13:11:00 +00:00
d2e5e2bf54
bcm53xx: sync NVRAM and SPROM drivers with upstream version
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45678
2015-05-13 08:30:45 +00:00
3a6cdac37c
kernel: backport first bcma patches from 4.2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45652
2015-05-09 17:38:48 +00:00
33e597b241
bcm53xx: sort ports from NVRAM entries before matching them
...
Some devices have unsorted ports which may lead to broken config.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45575
2015-04-24 07:47:25 +00:00
866fe3895d
bcm53xx: sysupgrade: check if new kernel fits partition size
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45547
2015-04-21 11:21:34 +00:00
457d9caf4d
bcm53xx: sysupgrade: improve NAND warnings
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45546
2015-04-21 11:04:38 +00:00
5b9d70c888
bcm53xx: image: prepare for generating serial flash images
...
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45545
2015-04-21 08:42:41 +00:00
a86e7330dc
bcm53xx: sysupgrade: drop some debugging message
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45544
2015-04-21 08:34:25 +00:00
688c1d74b9
bcm53xx: sysupgrade: allow flashing NAND devices without --force
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45543
2015-04-21 08:32:59 +00:00
d263c8e1a9
bcm53xx: sysupgrade: support flashing TRX with UBI image
...
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45542
2015-04-21 08:20:06 +00:00
92875dbd3d
bcm53xx: append only 1 block (with erasing mark) to UBI
...
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45541
2015-04-21 08:20:00 +00:00
ac6879caaa
bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades
...
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45540
2015-04-21 08:19:53 +00:00
c73adc80a3
bcm53xx: add profiling support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45480
2015-04-17 18:52:15 +00:00
9e03c36259
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45473
2015-04-17 06:03:00 +00:00
582b20c4e2
kernel: accidentally committed a few patches in the wrong place, move them
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468
2015-04-16 20:43:11 +00:00
b860db2c63
bcm53xx: add power button for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467
2015-04-16 20:09:55 +00:00
f6cbbe1332
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45464
2015-04-16 20:09:36 +00:00
d51420eedc
bcm53xx: increate trx maxlen to prevent build failures with bigger images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45461
2015-04-16 20:09:15 +00:00
f8d499fd3f
bcm53xx: fix WXR-1900DHP power led name and add usb led
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45460
2015-04-16 20:09:08 +00:00
c64fdadea7
bcm53xx: make use of the new board detection layer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45458
2015-04-16 12:18:34 +00:00
147e005fcf
bcm53xx: add USB 2.0 power control for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45451
2015-04-15 16:06:20 +00:00
83e31eb7e7
bcm53xx: add USB 2.0 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
3edb55143d
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45445
2015-04-14 20:50:59 +00:00
3cb8bf44e6
otrx: change command line API to start with a mode
...
This will allow adding more modes without options conflict.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
923bef1678
bcm53xx: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426
2015-04-13 22:23:37 +00:00
24e9f52106
bcm53xx: add support for the Buffalo WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419
2015-04-13 17:32:25 +00:00
1e48a48915
bcm53xx: fix GPIO pins > 16
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418
2015-04-13 17:32:18 +00:00
1f70f452cc
bcm53xx: add missing l2 cache controller AUXCTL bit
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416
2015-04-13 17:32:05 +00:00
d24388da44
bcm53xx: add a comment about the gpio base patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45408
2015-04-12 22:10:44 +00:00
77c75e6fa3
bcm53xx: try to handle Netgear R8000 VLANs config
...
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45403
2015-04-12 20:11:25 +00:00
2dbe131a62
bcm53xx: fix bcma gpio chip base
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45399
2015-04-12 17:22:04 +00:00
95ef64a779
bcm53xx: allow sysupgrade firmwares without UBI containing rootfs
...
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45392
2015-04-12 12:04:13 +00:00
24d40980b0
bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade
...
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45391
2015-04-12 11:46:16 +00:00
a04b71d330
bcm53xx: rework vendor fw handling to don't duplicate upgrade calls
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45389
2015-04-12 10:42:27 +00:00
503ccc502d
bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation
...
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45387
2015-04-12 10:20:59 +00:00
9d6e04a4f1
bcm53xx: build image for ASUS RT-AC56U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45353
2015-04-10 09:58:00 +00:00
71fcbffc91
bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45352
2015-04-10 09:42:48 +00:00
2198db252c
bcm53xx: switch to the otrx for verifying TRX images
...
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45320
2015-04-09 06:33:56 +00:00
4c1ee6f24d
bcm53xx: replace few BCM5301X patches with versions sent upstream
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45311
2015-04-08 09:22:02 +00:00
b6e8da2e14
bcm53xx: image: share function checking TRX in provided firmware
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45292
2015-04-07 14:14:08 +00:00
Hauke Mehrtens
Rafał Miłecki
John Crispin
Jonas Gorski
Felix Fietkau