Commit Graph

19 Commits (952db22551ae621deef18680625aaede453001f4)

Author SHA1 Message Date
Felix Fietkau ef68210f93 build: unify x86 target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38212
2013-09-26 17:53:24 +00:00
Jonas Gorski 1beaf031d1 target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
Felix Fietkau 741f6ba7ef x86: fix typo in alix2/net5501 default packages
SVN-Revision: 34972
2013-01-02 16:09:23 +00:00
Gabor Juhos 604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides
SVN-Revision: 31803
2012-05-18 20:10:38 +00:00
Gabor Juhos fb7da5bbde x86/net5501: switch to 3.3
Compile tested only.

SVN-Revision: 31752
2012-05-16 10:44:59 +00:00
Jonas Gorski 22b4e6b882 kernel: update linux 3.2 to 3.2.16
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
Jonas Gorski d0bfc67e2e kernel: x86: also update subtarget kernel versions
SVN-Revision: 31338
2012-04-17 21:01:43 +00:00
Jo-Philipp Wich 25d605ab0e net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30021
2012-02-03 18:14:02 +00:00
Jo-Philipp Wich d13c3cd073 net5501: adjust CFLAGS and package selection (#10893) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in.
SVN-Revision: 30013
2012-02-03 14:19:29 +00:00
Jo-Philipp Wich 7a9e4ffe8e alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility
SVN-Revision: 30000
2012-02-02 19:11:52 +00:00
Jo-Philipp Wich bf8bb9b661 alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad
SVN-Revision: 29999
2012-02-02 19:06:22 +00:00
Jo-Philipp Wich 047ba1e12e alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest
SVN-Revision: 29998
2012-02-02 19:00:40 +00:00
Jo-Philipp Wich 5523eca4e5 net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/]
SVN-Revision: 29994
2012-02-02 18:41:10 +00:00
Florian Fainelli 60c6d33e00 net5501: Add features to net5501 and remove HID support (unneeded)
Since the net5501 doesn't have a VGA port, it doesn't need HID support either --
 all console access will be over a serial port.

Also add FEATURES to it as well.

Signed-of-by: Philip Prindeville <philip@redfish-solutions.com>

SVN-Revision: 23916
2010-11-07 20:37:40 +00:00
Florian Fainelli b013e4eec4 add kmod-leds-net5501
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 23729
2010-10-30 22:35:59 +00:00
Florian Fainelli a6873b3095 Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms
Makes the builds run slightly faster on multicores.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 23495
2010-10-17 12:42:06 +00:00
Felix Fietkau 19723d09c2 x86: turn on optimizations for net5501 (patch by Philip A. Prindeville)
SVN-Revision: 23104
2010-09-20 22:14:07 +00:00
Nicolas Thill 37b02afe6a package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names
SVN-Revision: 21137
2010-04-24 14:08:49 +00:00
Florian Fainelli 15e8d2e0b7 add net5501 support
This patch brings up the net5501 platform.

Note that the x86/ target included support for all x86/ class
processors.  That's not technically correct.  This should be constrained
only to the "generic" subtarget.  Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.

It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't.  Again, moving
that to the generic subtarget.

Fortunately, this was a fairly benign tweak.

The net5501 board includes the following logic:

Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 20794
2010-04-11 12:36:55 +00:00