Commit Graph

1174 Commits (90c15beee62431fc0915f7ed167063ac194209b8)

Author SHA1 Message Date
John Crispin 850b3169ed ramips: rt288x: add missing symbol
Defaulting to disabled, based on the value of
the (old?) CONFIG_RALINK_USBPHY

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 44500
2015-02-22 08:28:42 +00:00
John Crispin 0ba8217008 ramips: nexx wt3020: fix status led
For Nexx WT3020 board_name is wt3020, not nexx-wt3020

root@OpenWrt:~# . /lib/ramips.sh; echo $(ramips_board_name)
wt3020

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44499
2015-02-22 08:28:35 +00:00
John Crispin 52b2a2c398 ralink: bump to v3.18
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44495
2015-02-19 14:04:47 +00:00
John Crispin 64db436416 ramips: fix the mt7628 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44494
2015-02-19 14:04:41 +00:00
John Crispin 3618391514 ramips: Buffalo WZR-AGL300NH target support
I got work with this patch.
Ethernet switch (includes VLAN), WiFi connected via PCIe, LEDs, buttons.

In mtd partion map of DTS file, I renamed Linux firmware regions (kernel + root squashfs) to “firmware”because it allows kernel to split kernel and roots and rootfsdata.

signed-off-by: ngc@ff.iij4u.or.jp
——
——

SVN-Revision: 44470
2015-02-16 21:19:18 +00:00
John Crispin f440414c55 ramips: enables rt288x PCIe
To choose whether bulid or not RT288x PCIe bus driver, CONFIG_SOC_RT2880 is wrong.
Here is its fix, and enables PCIe bus driver for some targets which have 2nd WiFi chipset via PCIe bus.

signed-off-by: ngc@ff.iij4u.or.jp
————
————

SVN-Revision: 44469
2015-02-16 21:18:59 +00:00
John Crispin 428dd56a60 ralink: fix the config files
oops, accidently moved instead of copied them

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44454
2015-02-14 20:48:53 +00:00
John Crispin 44b929fcdd ralink: make the mt7621 irq core with with the new CM api
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44418
2015-02-12 08:07:39 +00:00
John Crispin 0f4431758b ralink: fix when tx done is 0 also need to clean interrupt status
Signed-off-by: michael lee <igvtee@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44401
2015-02-11 13:05:14 +00:00
Nicolas Thill 29a57ce073 ramips/mt7620: add missing config symbol
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 44399
2015-02-11 12:13:49 +00:00
John Crispin 07352ca2c7 ralink: fix hw status almost full not work on mt7620 and mt7621
the old FE_INT_STATUS register becomes two registers.
FE_INT_STATUS and INT_STATUS. so the hw status almost full
must change to read from FE_INT_STATUS register.
tx/rx done read from INT_STATUS register.

mt7620 datasheet define CNT_GDM1_AF at BIT(29).
but after test it should be BIT(13). why?

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44371
2015-02-09 19:34:49 +00:00
John Crispin 525cd8aedb ralink: change rt3883 cpu type to 74kc
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44370
2015-02-09 19:34:32 +00:00
John Crispin 4ce7053b2b ramips: Kingston MLW221 and MLWG2 cleanup
MLW221 dts use tabs NOT spaces.
MLWG2 dts typo and 1 tab not spaces
01_leds and diag.sh cleanup

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 44356
2015-02-09 12:15:45 +00:00
John Crispin 2c03605028 ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi Mini
This patch sets the correct location of the mt76 radio in the pcie bridge
(pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44355
2015-02-09 12:15:17 +00:00
John Crispin 2dd7bce338 ramips: Add mt76 node for Lenovo Y1 and Y1S.
Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch.
Tested on Lenovo Y1.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 44354
2015-02-09 12:15:00 +00:00
John Crispin 654bc380ec ralink: add 3.18 support
keep default as 3.14, mt7621 gic need to be ported to 3.18

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44349
2015-02-09 12:13:55 +00:00
Luka Perkov 4b0fbf3072 ramips: fix patches after 3.14.32 bump
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44324
2015-02-08 15:42:42 +00:00
Luka Perkov 81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov 92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
John Crispin df22a8e3d0 ralink: fix USB host function for Intenso M2M
The ubootloader of the M2M sets the reset bits for
both USB device and USB host during initialization
(to save a few mA of power during boot).

However, for the usb<->sata bridge to be properly
detected, it is necessary to clear both reset bits
as otherwise the kernel logs will just be filled
with:

usb 1-1: device descriptor read/64, error -145
...

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

SVN-Revision: 44248
2015-02-03 10:11:11 +00:00
John Crispin b41bf7479e ralink: cleanup firefly default packages
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44244
2015-02-02 09:02:35 +00:00
John Crispin 043f462be4 ralink: add FireWRT button detail
Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 44242
2015-02-02 09:02:16 +00:00
John Crispin d725678a43 ralink: add FireWRT led detail
Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 44241
2015-02-02 09:02:10 +00:00
John Crispin 1258b4cc94 ralink: add ethernet macaddr to dts for FireWRT
Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 44240
2015-02-02 09:02:02 +00:00
John Crispin 70db4e4639 ramips: add support for Xiaomi MiWiFi Mini devices
This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio
wireless router based on the MediaTek MT7620a SoC.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44238
2015-02-02 09:01:07 +00:00
Felix Fietkau 10c8d8c483 ramips: fix ethernet driver tx completion polling
- budget is decremented with completed frames, so don't check if done is
smaller
- ACK the interrupt before processing further frames to fix a small race
condition.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44234
2015-02-01 08:20:37 +00:00
John Crispin c56cf3edc7 ralink: check ethernet MAC address whether it is valid
The mac address usually write in factory block. but sometime user erase this block , the mac address will change to ff:ff:ff:ff:ff:ff.
This patch is purpose to fix this issue.

Signed-off-by: wengbj <linux.c@foxmail.com>

SVN-Revision: 44166
2015-01-28 12:06:22 +00:00
Felix Fietkau bef829efa5 ralink: fix ethernet feature TSO not work
* fix TSO features verify on mt7621 firewrt board
* improve tx clean up. no need to access uncached
  memory. also use TX_DTX register instead of
  read tx ring DONE bit
* mt7621 need napi weight 64 to get more performance
* remove netif_receive_skb, after kernel version
  3.7 tcp4_gro_receive can handle tcp checksum.
  on rt2880 use iperf tcp LAN to WAN throughput test.
  with gro 135 Mbits/sec. without gro 80.4Mbits/sec.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44118
2015-01-24 22:45:28 +00:00
Felix Fietkau 3ec294a825 ralink: init tx/rx vlan offload register for mt7621
on mt7621 don't have tx vlan vid registers.
so set FE_REG_FE_DMA_VID_BASE to 0.
set rx vlan offload register to disable.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44117
2015-01-24 22:45:23 +00:00
Felix Fietkau e634e07893 ralink: use fe_max_buf_size to get rx buffer size
the rx_buf_size now is 1534 when mtu is 1500.
the ethernet frame with vlan tag and FCS is 1522.
so the buffer is enough.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44116
2015-01-24 22:45:16 +00:00
Felix Fietkau 5d4837706a ramips: fix ethernet vlan tx offload support check
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44115
2015-01-24 22:45:10 +00:00
John Crispin 36d19e46df ramips: add support for Tenda 3G150B
Add suport for Tenda 3G150B:
- cpu: Ralink RT5350F
- flash: 4MB
- ram: 32MB
- 1x USB 2.0
- 1x RJ45
- one reset button
- battery powered (BP-4L, 3.7V 1450mAh)

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44073
2015-01-22 09:35:22 +00:00
John Crispin deb66a555e ramips: improve and fix Memory 2 Move support
This patch is a follow up for my previous patch:
"ramips: add support for Intenso Memory 2 Move USB 3.0".

It fixes a couple of errors in the DTS (one of which broke
the gpio-buttons). The kmod-leds-gpio dependency has been
dropped as it is already part of the ramips target.

Furthermore the ramdisk/uImage image is generated by default
for the rt3050 subtarget. This image is needed to flash
OpenWrt for the first time onto the device via TFTP.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

SVN-Revision: 44072
2015-01-22 09:35:12 +00:00
John Crispin 607ecb249c ralink: add support for firewrt
this is a mt7621 based board

Signed-off-by: wengbj <linux.c@foxmail.com>

SVN-Revision: 44055
2015-01-20 06:34:28 +00:00
Felix Fietkau 9e7cc83edc ralink: fix ethernet rx buffer size breakage
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44047
2015-01-18 20:17:41 +00:00
Felix Fietkau a4460ca5a7 ralink: improve check rx sg function. use check frags instead of function call
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44046
2015-01-18 20:17:28 +00:00
Felix Fietkau b3ca42ec8f ralink: correct handle hardware rx 2bytes offset
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44045
2015-01-18 20:17:18 +00:00
Felix Fietkau 03ea0cf6f1 ralink: use fe_reset to control all reset
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44044
2015-01-18 20:17:07 +00:00
Felix Fietkau 50588ef192 ralink: improve tx_timeout function
* use default timeout value
* print more debug ring info
* move timeout reset function to workqueue

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44043
2015-01-18 20:16:50 +00:00
Felix Fietkau 69ee1807ed ralink: add ethernet fe and esw reset control bit
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44042
2015-01-18 20:16:44 +00:00
Felix Fietkau a5b578c2d9 ralink: reduce access to uncached tx/rx dma ring buffer
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44041
2015-01-18 20:16:35 +00:00
Felix Fietkau 68f50c4e2d ramips: downgrade mt7621 "Spurious GIC Interrupt" to debug messages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44028
2015-01-18 09:25:49 +00:00
Felix Fietkau b0e6e6e2f2 ramips: add mt7621 cpu feature overrides
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44027
2015-01-18 09:25:43 +00:00
Felix Fietkau f66cca61d2 ramips: refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44025
2015-01-18 09:25:32 +00:00
Felix Fietkau 632be658d5 ramips: add missing copyright info for relocate stub
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44017
2015-01-17 21:22:36 +00:00
Felix Fietkau 40b740b232 ramips: add preliminary support for DIR-860L B1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44016
2015-01-17 21:20:05 +00:00
Felix Fietkau 33848f14d3 ramips: add code for relocating a kernel to the right place
(used if the boot loader wants a different loadaddr/entry)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44014
2015-01-17 21:19:38 +00:00
Felix Fietkau 82f21058a1 ramips: enable the seama mtdsplit parser
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44013
2015-01-17 21:19:30 +00:00
Felix Fietkau 590e0d7f81 ramips: register mt76 device tree info for WSR-1166DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44010
2015-01-17 16:50:59 +00:00
Felix Fietkau 070f67aa9b ramips: register mt7621 pcie through device tree
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44009
2015-01-17 16:50:51 +00:00