0c597a8f53
kernel: add missing config option
...
SVN-Revision: 37978
2013-09-13 20:39:23 +00:00
b73b915c54
brcm47xx: board detection, GPIO for Linksys E1000 V2.1
...
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.
This fixes bug #14135 . Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.
Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37977
2013-09-13 19:24:08 +00:00
6c14f5f3a6
brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
...
Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37970
2013-09-13 16:00:52 +00:00
15ea1a6d66
kernel: gsc depends on kmod-i2c-core
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37960
2013-09-12 23:38:54 +00:00
e4c837f6d6
kernel: fix imx sata module
...
The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37950
2013-09-11 22:08:46 +00:00
a43c2d4e6f
kernel: add imx sata module
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37937
2013-09-10 22:26:37 +00:00
7d73153e86
kernel: allow hwmon GSC driver for all targets
...
- enable using hwmon GSC driver on all targets
- add a kmod package for it
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37933
2013-09-10 22:26:30 +00:00
247299bfa0
rt2x00: merge an rt2800 initialization order fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37922
2013-09-09 17:31:53 +00:00
768e6750d7
ath9k: clean up some patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37919
2013-09-08 09:38:38 +00:00
249c396583
mac80211: merge a big batch of upstream changes/improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37918
2013-09-08 09:38:32 +00:00
bdc04e379f
mac80211: kmod-rtl_pci: fix dependencies
...
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37905
2013-09-05 20:17:28 +00:00
f9b790bd55
kernel: kmod-libphy, kmod-tg3: fix load order
...
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37904
2013-09-05 19:57:44 +00:00
9af52f3a2c
kernel: kmod-ssb, kmod-b44: fix load order
...
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)
Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37903
2013-09-05 19:56:04 +00:00
fd561a47c5
kernel: kmod-firewire: fix dependencies
...
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37902
2013-09-05 19:53:21 +00:00
11ae55cc95
mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
...
linux-firemware contains the same version we loaded without this patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37901
2013-09-05 19:43:38 +00:00
14a65f1cfb
kernel: kmod-fs-xfs: fix dependencies
...
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37900
2013-09-05 19:41:00 +00:00
09a55136d7
kernel: kmod-usb-serial-keyspan: fix dependencies
...
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37899
2013-09-05 19:39:55 +00:00
82a2969100
ath10k: enable Atheros 802.11ac driver
...
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.
This goes build tested, not run time tested.
[Hauke: I did some minor changes]
Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37898
2013-09-05 19:35:14 +00:00
b85c090177
package/rotary-gpio-custom: fix checkpatch errors module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37875
2013-09-02 08:45:32 +00:00
1928106d0d
package/w1-gpio-custom: fix checkpatch errors in module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37874
2013-09-02 08:45:31 +00:00
f18a0d9547
package/i2c-gpio-custom: fix checkpatch errors in module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37873
2013-09-02 08:45:30 +00:00
6bb50e4df1
package/kernel: add spi-gpio-custom module
...
The package makes it possible to create custom SPI
buses via GPIO lines.
This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.
Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
- change subject,
- extend and reformat commit message,
- cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37872
2013-09-02 08:45:29 +00:00
0a85c59040
netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration
...
SVN-Revision: 37866
2013-09-01 17:59:48 +00:00
6c29525f42
mac80211: add a bunch of rt2x00 specific changes
...
Backport some rt2x00 specific changes from
wireless-testing/master-2013-08-26 to add
support for RT3573 based devices.
Also refresh the rt2x00 specific patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37843
2013-08-27 10:44:06 +00:00
eaa8cb7834
mac80211: merge a few ad-hoc mode fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37840
2013-08-26 17:31:23 +00:00
9cf157ac75
mac80211: disable CCK rates for 802.11n clients on brcmsmac to fix crash issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37839
2013-08-26 17:31:15 +00:00
b04baf0d0c
crypto: add missing depends for crypto-manager
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37817
2013-08-21 00:36:19 +00:00
2fc0c28345
broadcom-diag: remove BUFFALO_UNKNOWN
...
This was itriggered by to many non buffalo devices
This closes #14043 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37804
2013-08-17 13:43:07 +00:00
e12b5ec8df
broadcom-wl: Add 'N' mode support to broadcom-wl
...
This is partly based on patches sent by Łukasz Kwestarz (See https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014356.html ).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37802
2013-08-17 13:38:30 +00:00
d03d3aa58c
mac80211: merge upstream change to fix mesh rssi thresholds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37793
2013-08-15 13:57:11 +00:00
bbf4412bee
ath9k: merge a few more cleanups/fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37767
2013-08-13 10:35:18 +00:00
253d2b511b
ath9k: reorganize patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37766
2013-08-13 10:35:14 +00:00
ead5aa354c
mac80211: merge upstream patch to suppress unnecessary ad-hoc mode scan with fixed-freq, fixed-bssid
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37764
2013-08-13 10:35:04 +00:00
acb9bc0f5e
kernel: remove imx-sdma-fw because of license issues
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37755
2013-08-12 10:48:05 +00:00
556e850dfd
kernel: add imx-sdma-fw package
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37753
2013-08-11 15:10:42 +00:00
fd586c0275
ath9k: fix an rx descriptor processing race condition
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37746
2013-08-10 14:00:33 +00:00
39ab281fae
mac80211: Handle concurrent AP/STA beaconing properly
...
Use the "start_disabled" option in hostapd that was added
in the earlier patch.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37732
2013-08-06 17:59:09 +00:00
bdb2859a48
ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37716
2013-08-06 10:31:10 +00:00
5bce86faa2
mac80211: refresh a patch that was using the wrong patch style
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37715
2013-08-06 10:31:06 +00:00
48b3b74da7
mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37714
2013-08-06 10:31:02 +00:00
592f2c6e2b
ath9k: add some more fixes for the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37713
2013-08-06 10:30:58 +00:00
3f351e2770
mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37711
2013-08-05 21:57:48 +00:00
9d4145efe5
kernel: fix DMA error when BCM4331 is connected to BCM4706
...
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37709
2013-08-05 16:17:05 +00:00
6743f2625b
gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37702
2013-08-05 10:32:13 +00:00
259c36358f
mac80211: fix rt2x00 dependency
...
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37699
2013-08-05 09:24:19 +00:00
885cf1f19f
mac80211: rt2x00: fix LED polarity patch
...
The patch causes compiler warning ...
<...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
<...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
... and runtime errors on PCI/USB devices:
[ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
[ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
[ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
[ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
[ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37698
2013-08-05 09:09:41 +00:00
3573494b19
mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
...
Closes #13951 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37697
2013-08-05 09:09:40 +00:00
c7976ae5f8
mac80211: add rtlwifi drivers
...
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
usb dependencies, backport upstream fixes for Kconfig
issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37687
2013-08-04 15:32:36 +00:00
2fcaba306e
brcm47xx: change board detection for some Asus devices
...
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37680
2013-08-04 12:36:13 +00:00
0d9ecfa564
kernel: kmod-appletalk: fix dependencies
...
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.
This fixes the missing dependency of kmod-appletalk on psnap.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37673
2013-08-04 09:51:07 +00:00
7dea39fda2
broadcom-diag: show error message in case something goes wrong with gpio irq
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37668
2013-08-03 17:12:07 +00:00
309123bbfd
broadcom-diag: add gpio config for Asus RT-N66U
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37667
2013-08-03 17:10:37 +00:00
b1b3067a12
broadcom-diag: add gpio config for Linksys E4200v1
...
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37666
2013-08-03 17:09:39 +00:00
18e37d8caf
gpio-button-hotplug: cleanup, fix compiler warning
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37665
2013-08-03 11:56:27 +00:00
4281026dda
gpio-button-hotplug: fix active_low handling, possibly broken in r37643
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37664
2013-08-03 11:49:50 +00:00
d2ed54596d
kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is set
...
SVN-Revision: 37661
2013-08-03 10:10:16 +00:00
f43b6b2bea
kernel: add missing module to video-core for kernel < 3.6
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37659
2013-08-02 20:08:20 +00:00
65ef965e6e
kernel: fix usb-chipidea compilation with kernel <= 3.9
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37658
2013-08-02 20:07:11 +00:00
58274d68fb
broadcom-diag: add support for the ASUS RT-N12
...
This adds button and led info, which I determined
by manually poking the gpio values.
Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37655
2013-08-02 15:44:04 +00:00
af970e66bf
broadcom-diag: increase version number
...
There are some changes in there and this should be rebuild.
SVN-Revision: 37654
2013-08-02 15:06:14 +00:00
1972a131a0
mac80211: backport a few upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37653
2013-08-02 10:02:35 +00:00
0fe808d032
kernel: load libphy before tg3
...
SVN-Revision: 37651
2013-08-01 22:19:19 +00:00
2b55968f5d
brcm47xx: improve detection of Linksys WRTSL54GS
...
This closes #13319
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37647
2013-08-01 19:33:59 +00:00
1eabf431df
gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.
...
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be
used to swtich between 3 positions. At leat 1 button is in pressed state
in any of those positions. Initialize 'last_state' as 0 (released) will
cause the device to automatically enter failsafe mode on every bootup.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37643
2013-08-01 14:31:28 +00:00
ef96422920
gpio-button-hotplug: use gpio_button_get_value() to fetch state.
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37642
2013-08-01 14:31:24 +00:00
2c19af6ac5
gpio-button-hotplug: add inline function gpio_button_get_value().
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37641
2013-08-01 14:31:20 +00:00
e77339b9e2
broadcom-wl: fix compile error with kernel 3.10
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37626
2013-07-31 17:42:55 +00:00
5bd3f8b164
mac80211: rt2x00: add missing of.h header
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37618
2013-07-29 22:45:57 +00:00
36e6d4ca53
ath9k: fix several issues in the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37616
2013-07-29 19:44:05 +00:00
2b906791be
mac80211: rt2x00: fix default register settings for rt5350
...
Comparing the RTSDK driver and mac80211 revealed, that this register needs
to have a special setup on rt5350.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37608
2013-07-29 13:10:12 +00:00
7f895c6776
mac80211: rt2x00: enable setting wifi led polarity from OF
...
This patch enables setting the wifi led polarity from OF.
It can be used in a DTS' wmac section like this:
ralink,led-polarity = <1>;
Valid values are 0 or 1.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37607
2013-07-29 13:09:16 +00:00
1ff304e5f5
rt2x00: merge fix for queue stopping
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37603
2013-07-29 12:49:01 +00:00
c67a12711d
mac80211: add support for verbose builds using V=sc
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37597
2013-07-29 09:38:08 +00:00
181cb9f3fa
kernel: add usb-mxs-phy package
...
SVN-Revision: 37580
2013-07-28 20:34:18 +00:00
cc4bda8d67
kernel: update usb-chipidea package
...
SVN-Revision: 37579
2013-07-28 20:34:17 +00:00
769f986d9a
kernel: update usb2 package
...
SVN-Revision: 37578
2013-07-28 20:34:09 +00:00
4176b6fdd3
strict_strtoul is obsolete, use kstrtoul instead
...
based on http://patchwork.openwrt.org/patch/3827/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37562
2013-07-27 09:23:18 +00:00
4478c69b86
authsae: adapt uci scripts to use authsae
...
This patch modifies the uci scripts to be able to
start meshd-nl80211 for encrypted mesh networks,
therefor a new script (authsae.sh) is inserted.
Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
[etienne.champetier@free.fr: just update mac80211.sh path]
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 37554
2013-07-26 10:02:59 +00:00
aa81b9ed5f
kernel: be consistent with formatting style
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37545
2013-07-26 01:09:50 +00:00
3251cddf31
mac8021: add ath9k pcie id for AR9381
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37536
2013-07-25 20:28:45 +00:00
b037b0011e
kernel: ebtables depends on bridge
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37520
2013-07-23 19:53:08 +00:00
06a27059bd
lantiq: dont build ar10 drivers
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37500
2013-07-22 13:53:01 +00:00
94439c2b5d
kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37491
2013-07-21 11:55:30 +00:00
11c5730695
kernel: fix config breakage from removing the de4x5 tulip driver
...
Properly define the config symbol to n so it doesn't break build for
targets which do have it available (e.g. mostly everything except arm).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37489
2013-07-21 11:08:38 +00:00
c493e45058
kernel: fix kmod-crypto-hw-ppc4xx dependencies
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37488
2013-07-21 08:20:01 +00:00
2ea287816c
kernel: add missing config symbol for the chipidea usb driver
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37487
2013-07-21 08:19:58 +00:00
4332b7fce5
kernel: remove an exotic ethernet driver from the tulip package which does not build on some platforms
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37486
2013-07-21 08:06:56 +00:00
0494ec45f1
kernel: fix crypto-hw-talitos dependencies
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37485
2013-07-20 20:44:40 +00:00
a0129dfd8e
ath9k: add initial tx queueing rework patches
...
This forces all packets (even for un-aggregated traffic) through
software queues to improve fairness and stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37483
2013-07-20 16:37:50 +00:00
9ba76039d6
kernel: fix kmod-fs-btrfs dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37466
2013-07-19 23:10:40 +00:00
28752830c7
kernel: add fbdev.ko to kmod-fb on x86 dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37460
2013-07-19 22:30:35 +00:00
251b414641
kernel: fix kmod-rtc-pcf8563 dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37459
2013-07-19 22:27:31 +00:00
221ddfa19b
kernel: package the usbmon module
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37458
2013-07-19 22:19:26 +00:00
ddb0804479
kernel: simplify kmod-crypto-misc dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37448
2013-07-19 15:01:22 +00:00
4dbc5c64fa
kernel: fix kmod-et131x dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37446
2013-07-19 14:53:29 +00:00
5920feafda
kernel: fix usb-net-asix dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37445
2013-07-19 14:51:15 +00:00
0cb97db4be
kernel: fix crypto-hw-geode dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37443
2013-07-19 14:46:02 +00:00
0256b82631
kernel: fix crypto-hw-padlock dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37442
2013-07-19 14:44:12 +00:00
4a9adf4300
kernel: fix syntax error in kmod-crypto-misc
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37441
2013-07-19 14:41:33 +00:00
7642a4eeaa
kernel: add missing module for mmc-spi
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37440
2013-07-19 14:13:45 +00:00
85fb0fb29e
ltq-deu: add missing dependency
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37439
2013-07-19 14:10:18 +00:00
d6e9934924
kernel: fix kmod-usb-chipideai syntax
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37438
2013-07-19 13:35:28 +00:00
c12085a578
kernel: fix kmod-usb-chipideai dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37437
2013-07-19 13:23:47 +00:00
29954b9ffc
kernel: remove gpio_buttons
...
It hasn't been buildable for a long time, and there are no users of it
anymore left as all of them have been switched to the upstream accepted
version.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37436
2013-07-19 13:20:41 +00:00
1b5aa23ca2
button-hotplug: add missing dependency on kmod-input-core
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37429
2013-07-19 10:38:48 +00:00
f71d47e58e
linux: fix platform dependency of kmod-usb2-fsl
...
SVN-Revision: 37428
2013-07-19 10:34:40 +00:00
dd61797e96
linux: kmod-ipt-filter depends on kmod-ipt-conntrack
...
SVN-Revision: 37427
2013-07-19 10:08:26 +00:00
1f59f8ed40
kernel: change ipt depends to a select
...
Fixes recursive dependencies with kmod-ipt-core.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37426
2013-07-19 09:59:34 +00:00
108b880748
mac80211: add missing dependencies
...
Add missing dependencies for rt2800-lib and lib80211.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37422
2013-07-19 09:49:04 +00:00
85cf95b73a
kernel: video-core depends on i2c-core if i2c-core is selected
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37421
2013-07-18 20:40:17 +00:00
fe1a84ad71
kernel: kmod-gpio-mcp23s08 depends on i2c-core
...
But only if it is selected, so make it a conditionl dependency.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37420
2013-07-18 20:40:15 +00:00
5e239a0fa4
kernel: kmod-pcmcia-serial requires kmod-serial-8250
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37419
2013-07-18 20:40:13 +00:00
f3755ec53c
kernel: kmod-e1000e depends on pip for 3.8+
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37418
2013-07-18 20:40:10 +00:00
eee81c5fbf
kernel: net-zd1201 depends on usb-core
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37416
2013-07-18 17:26:43 +00:00
3b985bae1b
kernel: fix usb-net-cdc-mbim dependencies
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37415
2013-07-18 17:26:39 +00:00
b30b62619c
kernel: usb-serial-qualcomm depends on usb-serial-wwan
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37414
2013-07-18 17:26:36 +00:00
6fc24f7768
kernel: usb-serial-keyspan needs to include ezusb.ko
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37413
2013-07-18 17:26:32 +00:00
2bc5b4a02a
kernel: usb-serial-ipw depends on usb-serial-wwan
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37412
2013-07-18 17:26:28 +00:00
225cb7a3d7
kernel: mtdtests depends on nand
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37411
2013-07-18 17:26:24 +00:00
ec5f8304b2
kernel: bluetooth depends on crypto-hash
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37410
2013-07-18 17:26:21 +00:00
3dfe4bc893
kernel: rfkill depends on input-core
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37409
2013-07-18 17:26:17 +00:00
9ea4b73748
kernel: split slhc into a separate package and make slip depend on it
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37408
2013-07-18 17:26:13 +00:00
b4a847be93
kernel: fix accidental depends line duplication
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37407
2013-07-18 16:49:55 +00:00
f766aa2dee
kernel: sctp depends on ipv6 if ipv6 is enabled
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37406
2013-07-18 16:46:11 +00:00
58f50a7dbd
kernel: make kmod-sched depend on kmod-ipt-core
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37404
2013-07-18 16:32:12 +00:00
5308e258da
kernel: reduce spurious rebuilds of simple kmod-* packages
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37403
2013-07-18 16:32:07 +00:00
32d810e75a
linux: introduce new kmod-iptunnel for Linux 3.10+, add missing dependencies to netsupport packages
...
SVN-Revision: 37402
2013-07-18 15:47:13 +00:00
44fd7d9626
linux: add missing netfilter dependencies
...
SVN-Revision: 37401
2013-07-18 15:47:08 +00:00
a5f93fad9d
linux: add missing dependency to kmod-i2c-tiny-usb
...
SVN-Revision: 37399
2013-07-18 13:57:40 +00:00
8500a3fea4
linux: add missing dependencies to kmod-fs-msdos and kmod-fs-xfs
...
SVN-Revision: 37398
2013-07-18 13:57:36 +00:00
a842efc8cd
kernel: btrfs supports raid6 in 3.10, thus depends on lib-raid6
...
btrfs now supports raid5/6 and added appropriate depenendcies for 3.10.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37396
2013-07-18 13:08:35 +00:00
eaadc5c4f9
kernel: move xor into its own package
...
xor.ko is needed by btrfs in 3.10+, so split it out into its own
package. Make it hidden as it does not provide any functionality on its
own.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37395
2013-07-18 13:08:33 +00:00
050061a565
kernel: split out lib-raid6
...
raid_pq.ko is needed by btrfs in 3.10+, so split it out into its own
package. Make it hidden as it does not provide any functionality on its
own.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37394
2013-07-18 13:08:31 +00:00
69de869b0f
kernel: kmod-dm depends on crypto
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37393
2013-07-18 13:08:29 +00:00
9a38971a3e
kernel: crypto: add missing dependencies and files
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37392
2013-07-18 13:08:27 +00:00
5b931b9ec0
kernel: drop kmod-ata-sis
...
it was broken since 2.6.21, evidently nobody uses it and we can just
remove it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37391
2013-07-18 13:08:23 +00:00
b44ece50d4
linux: add missing dependencies to kmod-ip6tables
...
SVN-Revision: 37389
2013-07-18 11:57:19 +00:00
6640b83a3e
build: add kernel modules to package provides info (along with shared libs)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37385
2013-07-18 10:47:00 +00:00
8aa106cf43
imx23: ChipIdea changes
...
- move ci_hdrc into generic modules
- add separate package for imx-specific modules
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37384
2013-07-17 22:49:16 +00:00
eb8d23819f
ath5k: fix AHB support dependency ( #13896 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37377
2013-07-17 13:58:15 +00:00
d530ad0732
kernel: add sound-soc-imx-sgtl5000
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37360
2013-07-15 23:18:34 +00:00
b3ec189cdb
kernel: add sound-soc-imx
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37359
2013-07-15 23:18:33 +00:00
a5e70c13f8
mac80211: fix a crash in legacy minstrel when no STA exists
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37342
2013-07-15 12:35:23 +00:00
3cfa187818
kernel: add usb-dwc2 kmod
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37338
2013-07-15 11:08:04 +00:00
13f3c9dbe5
mac80211: b43: load b43 on core rev 17 and 18.
...
This is now controlled by a module parameter and the default
configuration depends on brcmsmac being installed.
This patch causes b43 to take core rev 17 and 18 always by default.
SVN-Revision: 37307
2013-07-14 14:23:04 +00:00
71230b33c1
mac80211: b43: activate LP-Phy support every time
...
SVN-Revision: 37305
2013-07-14 14:13:32 +00:00
a5c0ad6354
brcm47xx: add initial support for kernel 3.10
...
SVN-Revision: 37287
2013-07-14 13:44:45 +00:00
ef0b9be95e
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
SVN-Revision: 37284
2013-07-14 12:59:00 +00:00
9a5a262324
broadcom-diag: make it work with kernel 3.10
...
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.
SVN-Revision: 37280
2013-07-14 11:30:31 +00:00
c7370edf98
broadcom-diag: check the correct value for not null.
...
This also fixes a compile warning.
SVN-Revision: 37279
2013-07-14 11:28:37 +00:00
63d818a219
broadcom-diag: reoder some parts.
...
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.
SVN-Revision: 37278
2013-07-14 11:26:35 +00:00
299c2ceafa
mac80211: tweak mac address allocation
...
Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37269
2013-07-13 11:39:48 +00:00
92961e0917
mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37265
2013-07-12 08:10:19 +00:00
f8543faec4
mac80211: merge a fix for PS-Poll handling, refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37264
2013-07-12 07:59:59 +00:00
e389c2b410
mac80211: remove bogus module params from compat.ko
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37263
2013-07-12 07:59:51 +00:00
bec39b26ad
kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37256
2013-07-11 20:56:30 +00:00
c38b7b3913
kernel: make libsas depend on x86
...
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37254
2013-07-11 20:56:22 +00:00
0e479250a6
kernel: package the HW random core module
...
And update the crypto-hw-hifn-795x to use it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37231
2013-07-10 19:42:48 +00:00
eba9b8a324
kernel: unbreal of_i2c selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37201
2013-07-08 09:01:52 +00:00
fc40051569
lantiq: move dsl tools to package/network/config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37198
2013-07-08 09:01:38 +00:00
8fdf418c96
ltq-hcd: remove prebuilt module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37190
2013-07-08 00:37:50 +00:00
a1734998ee
kernel: fix 8250 ko name for 3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37164
2013-07-04 13:31:28 +00:00
cb179cb262
mac80211: make rt2x00_soc depend on !rt3883
...
https://dev.openwrt.org/ticket/13777
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37162
2013-07-04 13:31:18 +00:00
e15a16bfd7
button-hotplug: Add KEY_POWER handling
...
When running OpenWrt within KVM KEY_POWER is generated from the ACPI
button driver when restarting or powering down the VM.
Extend button-hotplug to allow user space handlers for these events.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/3799/
SVN-Revision: 37160
2013-07-04 13:31:09 +00:00
6988613f7a
gpio-button-hotplug: add support for EV_SW
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37130
2013-07-02 10:45:31 +00:00
16079fbd9a
rt2x00: fix rf id override for RT5350
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37109
2013-06-30 17:54:20 +00:00
2d8990256c
mac80211: use a new tarball with updated backport code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37105
2013-06-30 14:49:14 +00:00
12c033dfd9
mac80211: update to wireless-testing 2013-06-27, fix ATH_USER_REGD handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37097
2013-06-30 10:44:19 +00:00
0f6e9c9fcc
gpio-button-hotplug: improve gpio button debouncing, verify state changes over multiple polls. fixes spurious failsafe triggers ( #13784 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37090
2013-06-29 19:01:49 +00:00
ae6fc0e4bd
ath9k: fix tx queue pending frame counter when dropping packets
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37081
2013-06-29 12:38:15 +00:00
78ac19be04
mac80211: fix cck rate sampling in minstrel_ht
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37078
2013-06-28 19:14:54 +00:00
1761b7b370
mac80211: disable rt2x00 on mt7620a
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37037
2013-06-27 07:25:13 +00:00
0f003be010
ath9k: fix a minor rcu issue
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37013
2013-06-22 13:59:55 +00:00
fdb8d23745
mac80211: fix compile error on rt2x00 when buildin for SoC
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37008
2013-06-21 16:54:46 +00:00
4ebf19b48f
packages: clean up the package folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37007
2013-06-21 16:54:37 +00:00
4e0c649783
kernel: add dependencies for kernel 3.10
...
SVN-Revision: 36925
2013-06-12 13:59:34 +00:00
dff1529d2a
modules: make all led and button modules used during boot priority 1
...
This makes sure the modules are symlinked in /etc/modules-boot.d/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36892
2013-06-10 08:24:25 +00:00
eed8141976
kmod-usb-net-cdc-mbim: fix module loading
...
cdc_mbim should be loaded after cdc_ncm (closes : #13562 )
SVN-Revision: 36856
2013-06-05 14:34:50 +00:00
8170c9cfb0
add some more symbols
...
SVN-Revision: 36834
2013-06-04 11:23:27 +00:00
87203c4049
kernel: adapt module paths for 3.10-rc1
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36662
2013-05-19 18:36:09 +00:00
dc00dbd085
kernel: modules: kmod-fs-isofs depends on kmod-lib-zlib
...
Add missing dependency. Fixes #11624 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36593
2013-05-09 20:50:10 +00:00
826b4e36c4
kernel: add veth module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36540
2013-05-03 15:16:50 +00:00
7f2743d458
kernel: netfilter.mk: Explicitly set the order of autoloaded modules
...
In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.
So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 36512
2013-05-02 11:25:18 +00:00
af30e5e6bb
Enable hidraw support.
...
It's needed for dealing with certain UART-to-USB adapters built into
e.g. weather stations, and increases the hid module package only
slightly (e.g. on ar71xx: 35k -> 37k).
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36415
2013-04-24 09:49:09 +00:00
2cea3d3949
Add kernel module package for hid-generic driver.
...
Needed to support e.g. keyboards and mice.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36414
2013-04-24 09:49:03 +00:00
49799d344d
kernel: add kmod-mcp23s08 package
...
Package up the Microchip MCP23S08 I/O expander driver. Needed on the
CalAmp LMU5000 board.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
[jogo@openwrt.org: fix subject]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36393
2013-04-23 09:21:55 +00:00
38b4865a68
package/kernel: only include i2c-of if CONFIG_OF enabled
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36227
2013-04-06 16:55:25 +00:00
bf57f33f02
kernel: Allow talitos crypto hw module selection
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36224
2013-04-06 12:41:06 +00:00
1c8d2aec18
unbreak i2c-mv64xxx dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36192
2013-04-03 12:58:06 +00:00
8baf097b84
fix borken of-i2c dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36191
2013-04-03 12:51:12 +00:00
30ee3ef24e
add cdc-mbim module
...
http://patchwork.openwrt.org/patch/3370/
Signed-off-by: Rusink Rusinkoff <rzrusink@gmail.com>
SVN-Revision: 36184
2013-04-03 10:00:55 +00:00
219313833a
Add INA2XX current sensor module.
...
This is a I2C current/voltage/power sensor.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36182
2013-04-03 10:00:44 +00:00
7852c48ffd
add lm92 kernel module
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36181
2013-04-03 10:00:40 +00:00
62b5098b35
add pcf857x kernel module
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36180
2013-04-03 10:00:36 +00:00
c9254f5b5d
make OF_I2C build as part of i2c-core
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36179
2013-04-03 10:00:32 +00:00
c9544f4af0
kernel: add some fixes for kernel 3.9
...
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.
SVN-Revision: 36098
2013-03-20 21:59:24 +00:00
b48e5f2111
kernel: enable SND_COMPRESS_OFFLOAD for kernels >= 3.3
...
Most sound SoC driver enable it and rely it on to properly work.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36072
2013-03-17 19:46:00 +00:00
a5e7687e12
kernel: load regmap modules after kmod-lib-lzo
...
Otherwise regmap-core will not be able to lookup the lzo exported
symbols.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36069
2013-03-17 19:45:42 +00:00
c730da325a
package/kernel: i2c: don't skip built-in modules
...
Don't skip build-in modules when generating i2c kmod packages, to allow
empty packages to be generated for satisfying dependencies.
Closes #12259 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35755
2013-02-23 11:30:30 +00:00
316706b09c
package/kernel: add package for the Gianfar PTP driver
...
PTP for gianfar can be built as a module. Create a package for it.
[juhosg: remove the mp85xx specific patch]
Patchwork: http://patchwork.openwrt.org/patch/3344/
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35706
2013-02-20 19:14:20 +00:00
9070d701e7
package/kernel: add package for the Freescale Gianfar driver
...
[juhosg: move the fsl-pq-mdio driver into a separate package]
Patchwork: http://patchwork.openwrt.org/patch/3345/
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35705
2013-02-20 19:14:15 +00:00
330ae61b1b
package/kernel: remove trailing whitespaces from *.mk files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35691
2013-02-20 09:41:48 +00:00
97e75d03cc
package/kernel: add package for the Freescale On-Chip EHCI Controller
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35627
2013-02-16 17:13:40 +00:00
4cc962a0eb
add nForce Ethernet module
...
Signed-off-by: Zhiqiang Wang <wang.9264@gmail.com>
SVN-Revision: 35461
2013-02-02 15:40:43 +00:00
0fb081bb5a
package ncm & qmi wwan
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3134/
SVN-Revision: 35360
2013-01-28 18:20:10 +00:00
0492391922
kernel: make usb2-pci depend on usb2 and not the other way around
...
SVN-Revision: 35339
2013-01-27 21:28:26 +00:00
6f59cd3fb8
kernel: activate input-matrixkmap for kernel 3.8
...
SVN-Revision: 35338
2013-01-27 21:23:33 +00:00
0d42d05242
kernel: add ehci-platform.ko and ehci-pci.ko when build with kernel 3.8
...
SVN-Revision: 35337
2013-01-27 21:19:48 +00:00
62554217fc
kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8
...
SVN-Revision: 35336
2013-01-27 21:18:52 +00:00
a6ad512d82
kernel: 8250.ko is called 8250_core.ko on linux 3.7+, fixes package/kernel build error in snapshot builds
...
SVN-Revision: 35190
2013-01-17 09:08:09 +00:00
8b21ccae13
kernel: allow building kmod-rtc-marvell for mvebu target
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35177
2013-01-15 19:55:26 +00:00
e959b45920
package/kernel: move input modules into a separate submenu
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35161
2013-01-14 18:18:03 +00:00
f4802fa8bf
kernel: make sure that packages are generated for built-in crypto modules to avoid dependency errors with kmod-crypto-core on 3.7
...
SVN-Revision: 35158
2013-01-14 17:09:16 +00:00
10ef67ed21
kernel: avoid recursive dependency caused by kmod-i2c-mv64xxx
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35157
2013-01-14 17:03:45 +00:00
03a50b9087
netfilter.mk: add addrtype match to iptables-mod-extra (kmod-ipt-extra)
...
SVN-Revision: 35155
2013-01-14 16:12:56 +00:00
0f101497ac
kernel: make kmod-ledtrig-usbdev depend on usb core support instead of selecting it
...
SVN-Revision: 35120
2013-01-12 13:21:08 +00:00
57d6e73143
kernel: add kmod-mvsdio MMC host controller for Marvell targets
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35061
2013-01-08 22:20:30 +00:00
7e0c80bcb6
kernel: make kmod-of-i2c available for the mvebu target
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35060
2013-01-08 22:20:25 +00:00
85fbe13cf5
kernel: adjust orion/kirkwood packages to also build for mvebu target
...
Armada XP/370 boards share these hardware blocks with Orion and Kirkwood
SoCs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35059
2013-01-08 22:20:21 +00:00
c38cb63808
kernel: add more SCTP related configuration symbols
...
These symbols are used by 3.8+ kernels
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35054
2013-01-08 22:18:23 +00:00
cedbe66e9a
kernel: fix kmod-ipsec load order ( #12552 )
...
SVN-Revision: 35032
2013-01-07 10:54:56 +00:00
bef592844b
zram: add package to use compressed ram disk for swap
...
The busybox size is increased by 3.2KByte uncompressed on bcm47xx with
this commit.
This zram-swap automatically creates a zram device, a swap partition on
it and make the kernel swap pages to it.
Thank you Bastian Bittorf <bittorf@bluebottle.com> for idea and the
script.
SVN-Revision: 35025
2013-01-06 16:21:29 +00:00
82b3e879d4
kernel: add a module for the isl1208 rtc
...
SVN-Revision: 35022
2013-01-06 15:09:43 +00:00
e6aac19237
fix regmap debloat patch
...
SVN-Revision: 35015
2013-01-05 00:20:05 +00:00
96f3911981
kernel: move regmap bloat out of the kernel image if it is only being used in modules
...
SVN-Revision: 34999
2013-01-03 18:39:50 +00:00
1dada293bf
add kmod-fs-configfs to replace kernel bloat added by selecting kmod-mmc-over-gpio
...
SVN-Revision: 34998
2013-01-03 18:04:04 +00:00
8f6bdcffa1
brcm47xx: build b44 as a module
...
SVN-Revision: 34994
2013-01-03 02:00:25 +00:00
a730e96569
Remove remaining etrax references
...
SVN-Revision: 34968
2013-01-02 11:28:11 +00:00
075ea0d52e
fix typo in HFS kernel module
...
Signed-off-by: Ian Leonard <antonlacon@gmail.com>
SVN-Revision: 34963
2013-01-02 10:29:45 +00:00
12f36652e6
fix video modules package generation
...
The folder layout changed between 3.6 and 3.7
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 34960
2013-01-02 09:43:07 +00:00
cbc9dfc56a
package/kernel: select crypto-sha256 for cifs on 3.7+
...
Based on a patch from #12711
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34956
2013-01-01 19:04:20 +00:00
ab4ea8ad16
package/kernel: create separate package for the sha256 crypto module
...
Based on a patch from #12711
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34955
2013-01-01 19:04:17 +00:00
fcf65bdee3
package/kernel: remove obsolete CONFIG_USB_[EO]HCI_RT3883=y symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34844
2012-12-22 12:11:09 +00:00
ae97cc7d0f
kernel: fix module names for crypto modules in 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34751
2012-12-18 14:50:43 +00:00
b9d1bdb374
kernel: add a module for ipv6 gre
...
SVN-Revision: 34709
2012-12-15 21:59:56 +00:00
12cfa40375
add crypto-pcompress
...
SVN-Revision: 34685
2012-12-15 01:59:29 +00:00
3a4a6cfd64
kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko
...
SVN-Revision: 34652
2012-12-13 00:09:55 +00:00
b7f026680a
package/kernel: enable CONFIG_SND_SOC_DMAENGINE_PCM in sound-soc-core
...
This is required for 3.6+ kernels and some sound SoC modules.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34618
2012-12-10 21:05:32 +00:00
157cccaa6b
package/kernel: snd-soc-core depends on regmap
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34616
2012-12-10 21:05:15 +00:00
7685458982
package/kernel: package kmod-input-matrixkmap
...
This is required by some keyboard drivers in 3.6+
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34614
2012-12-10 21:05:06 +00:00
1820e8566e
kernel: include the xfrm_algo module on 3.6+ ( fixes #12552 )
...
SVN-Revision: 34611
2012-12-10 18:49:30 +00:00
94c1d77886
kernel: fix video-core build on 3.6+
...
SVN-Revision: 34533
2012-12-06 14:11:19 +00:00
4a1e2123eb
kernel: remove references to TARGET_ubicom32
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34431
2012-11-30 10:53:51 +00:00
203cbbd51d
modules: remove obsolete comment ( #12514 )
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34327
2012-11-25 11:41:07 +00:00
24a372b6ec
package: kernel: make crypto kmods always visible
...
Don't hide crypo submodules unless crypo-core is selected.
Fixes kmods depending on crypto modules being unselectable
until crypto core is selected (like ext4 on 3.6 or mac80211).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 34298
2012-11-22 11:55:18 +00:00
c0eb827265
kernel: modules: ext4 depends on crypto-hash on 3.6
...
SVN-Revision: 34159
2012-11-11 19:42:35 +00:00
ae912505ac
i2c-gpio-mux: fix build for 3.6+ kernels
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34152
2012-11-11 18:40:43 +00:00
cc82648600
Load schedule modules
...
They were missing the AUTOLOAD directive.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 34107
2012-11-07 19:36:56 +00:00
aa0944ff72
Add ledtrig-oneshot module for 3.6 kernels
...
This patch adds a package for the ledtrig-oneshot module, available in
3.6 and later.
[juhosg: change dependency from LINUX_3_6 to !LINUX_3_3]
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
SVN-Revision: 34079
2012-11-05 07:10:35 +00:00
47f3be57d0
add missing =y
...
SVN-Revision: 33988
2012-10-29 10:12:47 +00:00
Hauke Mehrtens
Luka Perkov
Felix Fietkau
Gabor Juhos
Steven Barth
Jonas Gorski
John Crispin
Jo-Philipp Wich
Zoltan Herpai
Florian Fainelli
Nicolas Thill
Imre Kaloz