Commit Graph

138 Commits (8c11133c9de632dca69c8464f911d8e2716effe2)

Author SHA1 Message Date
Daniel Golle a704a2c06f ltq-vdsl-fw: fix ltq-vdsl-vr9-vectoring-fw-installer package install
The package is not being generated otherwise, which is fatal because
it is part of the subtargets default package set...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-21 12:00:12 +02:00
Daniel Golle 3d20bee2cd ltq-vdsl-fw: add meaningful version information
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-20 14:39:22 +02:00
Daniel Golle 512c57e7f3 ltq-vdsl-fw: add nonshared flag
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-19 17:57:06 +02:00
Kevin Darbyshire-Bryant 83f31b7947 ltq_atm: burn ifx_atm_alloc_tx with fire
Drop code that was never used.

Tested on: BT HomeHub 5a

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-06-18 21:47:05 +02:00
Daniel Golle 70f4845777 ltq-vdsl-fw: strip legacy dsl_fw logic
We unfortunately dropped support for persistent in-flash DSL firmware.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-15 13:30:47 +02:00
Daniel Golle 0653e31270 lantiq-vdsl-fw: update to provide recent vectoring firmware
Recent Speedport firmware downloads only work over HTTPS, so the user
either needs to provide the already downloaded file or install
ustream-ssl-* as well as ca-certificates or ca-bundle.

So to get VDSL2 with vectoring on xRX200, simply run
vdsl_fw_install.sh
on the target and either provide the downloaded file as instructed or
make sure the device is connected to the Internet and can download that
HTTPS url itself.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-15 12:45:37 +02:00
Daniel Golle 8e2f8b0c83 Revert "lantiq: get rid of ltq-vdsl-fw"
This reverts commit 0938233fcd.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-15 12:45:37 +02:00
Martin Schiller eee8ab59dc ltq-vdsl-mei: reset g_tx_link_rate on showtime exit
Without this change, ifx_mei_atm_showtime_check() will always return
"showtime" after one call of MEI_InternalXtmSwhowtimeEntrySignal()
was done, even if MEI_InternalXtmSwhowtimeExitSignal() was called
in the meantime.

The ifx_mei_atm_showtime_check() function is used by the ltq-atm and
ltq-ptm driver.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2018-06-09 16:32:39 +02:00
Hauke Mehrtens d11aa1d4af ltq-vdsl-mei: Fix section mismatch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-18 14:06:00 +01:00
Hauke Mehrtens 5587b8f451 ltq-deu: Fix section mismatches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-18 14:06:00 +01:00
Mathias Kresin cde4f9008a lantiq: ltq-adsl: deactivate ASLR support
The package still leaks some user space linker options into the kernel
space. This breaks the build when ASLR is activated, deactivate it for
now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-03-06 19:49:06 +01:00
Hauke Mehrtens 45ae5c2de3 lantiq: Deactivate ASLR support for some applications
The lantiq components still leak some user space linker options into the
kernel space. This breaks with build when ASLR is activated, deactivate
it for now on these packages.

Fixes: FS#1391
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-03 12:58:55 +01:00
Hauke Mehrtens d67b3d0df8 lantiq: ltq-vmmc: Do not leak user space CFLAGS into kernel space
Do not leak the user space CFLAGS into the kernel space any more, this
allows us to activate the MIPS16 build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-03 12:58:55 +01:00
Hauke Mehrtens 58ad312755 lantiq: ltq-tapi: Do not leak user space CFLAGS into kernel space
Do not leak the user space CFLAGS into the kernel space any more, this
allows us to activate the MIPS16 build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-03 12:58:55 +01:00
Hauke Mehrtens 4d90887496 lantiq: ltq-adsl: Do not leak user space CFLAGS into kernel space
Do not leak the user space CFLAGS into the kernel space any more, this
allows us to activate the MIPS16 build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-03 12:58:55 +01:00
Hauke Mehrtens b5c5f7d203 lantiq: ltq-vdsl: Do not leak user space CFLAGS into kernel space
Do not leak the user space CFLAGS into the kernel space any more, this
allows us to activate the MIPS16 build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-03 12:58:55 +01:00
Hauke Mehrtens 13639e76dd lantiq: ltq-vdsl-mei: Do not leak user space CFLAGS into kernel space
Do not leak the user space CFLAGS into the kernel space any more, this
allows us to activate the MIPS16 build.

This decreases the size of the ipk file from 87589 bytes to 81267 bytes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-03 00:53:35 +01:00
Hauke Mehrtens c8abbf1e22 lantiq: ltq-ifxos: Do not force O3 build any more
Do not force to build with O3 optimization any more, but take what was
selected by the OpenWrt build system.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-03 00:53:35 +01:00
Hauke Mehrtens c6162fdc50 lantiq: ltq-ifxos: activate build with mips16
The build process does not leak the user space cflags into the kernel
build process any more, this allows to activate MIPS16 builds.
This was fixed with some update of ifxos.

This decreases size of the  libifxos.a and the ltq-vdsl-app
old:
78320 libifxos.a
44383 ltq-vdsl-app_4.17.18.6-2_mips_24kc.ipk

new:
66852 libifxos.a
43506 ltq-vdsl-app_4.17.18.6-2_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-03 00:35:26 +01:00
Hauke Mehrtens 73ba5e11f7 lantiq: fix lantiq applications kernel 4.14 compatiblity
This is fixing multiple compile problems with kernel 4.14 and updates the
code to take care of changes introduced between kernel 4.9 and 4.14.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-02-20 19:25:17 +01:00
Martin Schiller a8b023272d
ltq-atm: cleanup unused variables and functions
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2018-02-05 17:45:54 +01:00
Alexander Couzens 17eb826a70 ltq-atm: rewrite tx path to use IRQs
The ATM subsystem is different from the generic ethernet NICs. The ATM
subsystem requires a callback when a packet has been sent. It means a
tx skb_buff need to be used after it has sent. While the generic NIC
can fill up the TX ring and free skb_buffs if it encounter a ring buffer slot
with an already sent skbuff.
The ATM drivers need call the pop() function after it has send a
single ATM package. The ATM subsystem controls via this ways the queuing.

The ppe engine use DMA channels for read and write. Every atm_vcc has it's
own TX DMA channel and each TX DMA channel has it's own ring buffer.

The old driver had multiple issues:
- Call the subsystem callback at the beginning of tx function (ppe_send).
  Didn't allowed the ATM subsystem to control the enqueued package
  amount.
- Filled up the TX ring until full and fail futher
- copy or decouple the skb from all other subsystem before giving it
  over to TX ring

The new tx path uses interupts.
- call the subsystem callback _after_ it was sent by hardware
- no need to copy our decouple the skb any more
- gives back control to the atm subsystem over the enqueued packages
- use an interupt for every sent atm package

Using interupts shouldn't be a problem because of the slow uplink bandwidth of
ADSL.
The speed _through_ the DSL router was always as high as it should
be, only traffic generated on the router itself were affected.

After changing to new tx path, the speed of iperf's run on the
router itself reached the same speed. The master/trunk wasn't as much
affected because of TCP optimisations (reboot-5022-gb2ea46fe236a).
The following results are taken on the remote server, which receives
the stream over the internet and the DSL line.

The sync moves between every sync a litte bit, but is so far stable
Latency / Interleave Delay:               Down: Fast (0.25 ms) / Up: Fast (0.50 ms)
Data Rate:                                Down: 13.287 Mb/s / Up: 1.151 Mb/s

reboot-5521-g9f8d28285d without patch
[ ID] Interval           Transfer     Bandwidth       Retr
[  5]   0.00-10.04  sec   947 KBytes   773 Kbits/sec    0             sender
[  5]   0.00-10.04  sec   928 KBytes   757 Kbits/sec                  receiver

reboot-5521-g9f8d28285d with patch
[  5]   0.00-10.06  sec  1.16 MBytes   970 Kbits/sec    0             sender
[  5]   0.00-10.06  sec  1.15 MBytes   959 Kbits/sec                  receiver

v17.01.4-239-g55c23e44f4 without patch
[ ID] Interval           Transfer     Bandwidth       Retr
[  5]   0.00-10.04  sec  87.4 KBytes  71.3 Kbits/sec    0             sender
[  5]   0.00-10.04  sec  59.6 KBytes  48.7 Kbits/sec                  receiver

v17.01.4-239-g55c23e44f4 with patch
[ ID] Interval           Transfer     Bandwidth       Retr
[  5]   0.00-10.05  sec  1.18 MBytes   983 Kbits/sec    1             sender
[  5]   0.00-10.05  sec  1.15 MBytes   959 Kbits/sec                  receiver

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-02-05 16:36:26 +01:00
Mathias Kresin d3fd38637f lantiq: create ATM/PTM interfaces with dsl as netdev name
Renaming an atm etherbride using 'ip link' (via hotplug) is racy since the
original netdev might disappear before br2684ctl has finished appling it's
setting:

 local2.notice br2684ctl[1667]: Interface "nas0" created sucessfully
 local2.notice br2684ctl[1667]: Communicating over ATM 0.8.35, encapsulation: LLC
 kern.info kernel: dsl0: renamed from nas0
 kern.err kernel: br2684:br2684_regvcc: tried to attach to non-existent device
 local2.err br2684ctl[1667]: Could not configure interface:No such device or address

By passing the final used netdev name to br2684ctl_wrap another race
condition workaround will be enabled again.

Change the lantiq ptm driver to create a netdev with the name dsl as well.
Albeit the rename via 'ip link' works fine so far, using a different
approach for ptm then atm could be confusing.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-10 08:08:53 +01:00
Yousong Zhou b59b799cb1 ltq-ifxos: fix compilation against glibc
Fixes FS#1196

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-11-30 14:53:16 +08:00
Jonas Gorski dea3bad84e ltq-ptm: add missing depency to ltq-?dsl-*-mei
Add the required dependency to the mei driver as cought by the depenceny
checker.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski e76340198f ltq-atm: fix dependency for xrx200
Ad the missing dependency for the xrx200 variant, which depends on the
vdsl mei driver.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski a9a78a70cc ltq-adsl-mei: use the same file name for all variant
Due to limitations in the symvers treatment and the mei drivers
exporting the same funtions, modpost might use the wrong mei driver
to link against.

Work around this by renaming them all to the same name, making it
always the "right" module name even if the wrong file was used.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Mathias Kresin 56189f1e32 ltq-atm: add missing dependency to kmod-ltq-adsl-*-mei
Commit 2e496876c6 fixed the generation of the depends line for external
kernel modules which makes it possible for the build system to
automatically detect this missing dependency.

This fixes the packaging of kmod-ltq-atm for the ar9, xway and
xway-legacy subtarget.

Fixes: FS#1124

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-03 20:04:40 +01:00
Hauke Mehrtens 1e5e005841 ltq-atm: Add missing dependency to kmod-ltq-adsl-ase-mei
Commit 2e496876c6 fixed the generation of the depends line for external
kernel modules which makes it possible for the build system to
automatically detect this missing dependency. This fixes the build bot
build of the lantiq/aes target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-29 17:01:26 +01:00
Mathias Kresin 63c436ea4b ltq-atm: remove xrx200 special handling
The lantiq ATM driver is load for all subtargets on demand now. There
is not need to handle the xrx200 ATM driver in a special way any
longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-25 08:45:05 +02:00
Mathias Kresin 1470c79ceb ltq-adsl-app: use notification based ATM/PTM driver load
This patch removes the fixed atm/ptm driver loading and
switches to notification based driver loading.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-25 08:45:05 +02:00
Mathias Kresin d07f924978 ltq-vmmc: disable for falcon
The module fails to compile with falcon. Remove the falcon depends from
the module to not (try to) compile it for falcon any longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-04 20:08:15 +02:00
Mathias Kresin bd523d4573 ltq-ptm: mark AmazonSE support as broken
Albeit ltq-ptm is supported on AmazonSE, the package fails to compile.
Mark the AmazonSE variant as broken to not mark it unnecessary harder
to fix (and test) the compile error.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-04 20:08:15 +02:00
Mathias Kresin fe36f7b0a6 ltq-vdsl-mei: revert disable optimized firmware download
This reverts commit b428f45c06.

If the optimized firmware download is disabled, the xdsl subsystem
hangs in the "idle request" state after physically disconnecting and
reconnecting the xdsl modem from the line.

It might fix the failing line init on boot as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-09-30 20:36:48 +02:00
Mathias Kresin 36fd53f9a9 ltq-vdsl-mei: disable optimized firmware download
With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and
enabled by default. As soon as the optimized firmware download is
enabled, a watchdog based reboot is trigger between 24h to 48h of
uptime if the board isn't connected to a xdsl line.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-09-28 07:23:18 +02:00
Martin Schiller f1ae982f8d ltq-vdsl: fix PM thread suspend and resume handling
This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM
thread handling issues which lead to high system load and watchdog
trigger within 1h of uptime for boards not connected to a xdsl line.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-09-28 07:23:18 +02:00
Daniel Golle 289d190f66 lantiq: ltq-ptm: fix ADSL showtime handler
commit 2d6c7c2526 introduced a reference to g_xdata_addr which isn't
defined in that context. Use xdata_addr here instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-08-29 02:20:45 +02:00
Martin Schiller 2d6c7c2526 lantiq: ltq-atm/ltq-ptm: fix showtime handling on driver load
This is needed to be able to load the ltq-atm/ltq-ptm driver
from a notify script during synchronization, because the line can
reach showtime state before the driver is fully loaded.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-08-06 09:22:03 +02:00
Florian Eckert 4482063c34 treewide: add license tags
Add licence tags where missing.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2017-06-24 22:36:38 +02:00
Tino Reichardt 5ca2033d33 lantiq: fix lantiq_mei.c and amazonse.dsti for adsl modem firmware
The ltq-adsl-mei package is used for 3 lantiq device types:
danube, amazon-se and ar9.

These different SoC's need also different definitions.

Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
[fix LTQ_USB_OC_INT for AR9 to match documentation]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-06-03 21:34:59 +02:00
Tino Reichardt 743be70d5b lantiq: fix ifxmips_atm_amazon_se.c
Remove 6 defines, which were defined already some lines above.

Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
2017-06-03 21:14:07 +02:00
Stefan Koch 49acec5b5f lantiq: align falcon code with ar9-vr9 code
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2017-03-27 08:05:53 +02:00
Stefan Koch 001a50d314 lantiq: cleanup code ar9-vr9 parts
- remove unused code within 500-ar9_vr9.patch
- fixed return of IFX_ERROR (solves SIGSEGV in asterisk at failure)
- align it a bit with 400-falcon.patch
- remove 600-kernel-4.9.patch since changed parts
  are removed during cleanup

Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2017-03-27 08:05:53 +02:00
Stefan Koch aadd629c07 lantiq: remove residual watchdog parts from ltq-vmmc
modify 500-ar9_vr9.patch from
commit 29367aac42 ("lantiq: ltq-vmmc add support for ar9-vr9")

- remove unused dependencies to external watchdog functions
  (wdog setup is already disabled)
- using header file from kernel (asm/vpe.h) instead patched file (vpe.h)
- cleanup whitspace warning

Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2017-03-24 08:09:39 +01:00
Hauke Mehrtens 2eed1179be ltq-ptm: use netif_trans_update() only for kernel >= 4.7
This fixes a bug introduced in commit c7ce9908bd
"ltq-ptm: fix build with kernel 4.9"

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-12 01:26:33 +01:00
Hauke Mehrtens ca9b9969fb ltq-vmmc: fix build with kernel 4.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:31:47 +01:00
Hauke Mehrtens c7ce9908bd ltq-ptm: fix build with kernel 4.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:31:47 +01:00
Hauke Mehrtens 4af4f21492 ltq-vmmc: mark VOICE_CPE_VMMC_PMC as broken
We do not have the needed platform support for VOICE_CPE_VMMC_PMC. The
vmmc driver will not compile with this option activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-25 18:43:55 +01:00
Felix Fietkau 720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Mathias Kresin 57d36e5bdd ltq-hcd: drop package
Since ffd7c15500 it isn't used anymore on
any supported target.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00