Commit Graph

194 Commits (89701ec518741ab8a550eeb48e9d840abcab0dbb)

Author SHA1 Message Date
Jonas Gorski b31108e0a8 tools: imagetag: add parameter for padding images
Allow images to be padded to a certain size. This prevents CFE from
flashing them to the second image offset.

SVN-Revision: 31875
2012-05-27 13:22:19 +00:00
Gabor Juhos de7324674a firmware-utils/mktplinkfw: add support for the TL-WR1041N v2
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31609
2012-05-05 17:02:38 +00:00
Gabor Juhos 84267683bb firmware-utils/mkfwimage: allow to override firmware magic
SVN-Revision: 30627
2012-02-18 14:45:54 +00:00
John Crispin cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
Gabor Juhos 1338af2640 firmware-utils/mkmylofw: add WPE72 support
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29913
2012-01-26 17:01:43 +00:00
John Crispin ccb6b0a063 tools: clean up Makefiles / make ccache work
SVN-Revision: 29754
2012-01-15 11:43:13 +00:00
Gabor Juhos 8a8e5bde15 firware-utils/mktplinkfw: add TL-WR2543N/ND support
SVN-Revision: 29681
2012-01-07 19:36:40 +00:00
Gabor Juhos 923e5d3543 firmware-utils/mktplinkfw: add support for TL-WA701N/ND
SVN-Revision: 29655
2012-01-04 17:30:53 +00:00
Gabor Juhos 55e13f4e6a firmware-utils/mktplinkfw: add support for TL-MR3020
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29650
2012-01-04 17:30:44 +00:00
Gabor Juhos 29a2c2ea80 firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image
SVN-Revision: 29544
2011-12-15 22:03:42 +00:00
Gabor Juhos 2592c0a283 tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layout
SVN-Revision: 29466
2011-12-06 16:26:41 +00:00
Gabor Juhos 54c8d61b03 firmware-utils/mktplinkfw: allow to align the rootfs on a specified boundary
SVN-Revision: 29445
2011-12-05 14:52:31 +00:00
Gabor Juhos 81cda3e2f1 firmware-utils/mktplinkfw: fix combined image creation
SVN-Revision: 29409
2011-12-03 16:57:21 +00:00
Gabor Juhos 6632e38d08 firmware-utils/mktplinfw: use htonl/ntohl
Based on a patch by Adrian Chadd <adrian@freebsd.org>

SVN-Revision: 29327
2011-11-24 20:09:40 +00:00
Gabor Juhos 13b0ec6cf7 firmware-utils/mktplinkfw: add TL-WR741ND v4
SVN-Revision: 28707
2011-11-01 11:20:54 +00:00
Vasilis Tsiligiannis aadbbc4bac Add firmware tool for generating factory images for Edimax devices
SVN-Revision: 28688
2011-10-30 22:57:41 +00:00
Gabor Juhos 500a8e2014 firmware-utils/mktplinkfw: fix hardware id of the TL-WR740 v3
SVN-Revision: 28602
2011-10-26 13:34:48 +00:00
Gabor Juhos 712521955b firmware-utils/mktplinkfw: add support for TL-WR703N v1
Patch-by: dongyuqi <729650915@qq.com>

SVN-Revision: 28278
2011-09-21 11:47:55 +00:00
Gabor Juhos ffbdaf8ec8 firmware-utils/mktplinkfw: add support for TL-WR743ND v1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 28270
2011-09-21 11:47:42 +00:00
Gabor Juhos 9faace4327 firmware-utils/mktplinkfw: add support for TL-WR740N v3
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

SVN-Revision: 28268
2011-09-21 11:47:39 +00:00
Felix Fietkau bdb676b90d firmware-utils: rename the devname variable in mkwrgimg to avoid a clash with a BSD stdlib function
SVN-Revision: 27553
2011-07-08 05:20:24 +00:00
Gabor Juhos 9d980dc121 tools/firmware-utils: add yet another buffalo tool
SVN-Revision: 27475
2011-07-06 08:04:53 +00:00
Gabor Juhos 533067b8f5 tools/firmware-utils: allow to create buffalo image from two files
SVN-Revision: 27473
2011-07-06 08:04:50 +00:00
Gabor Juhos ea6bc8858a tools/firmware-utils: allow to create buffalo tags w/o hw version
SVN-Revision: 27472
2011-07-06 08:04:49 +00:00
Gabor Juhos 1c5b7d0a32 tools/firmware-utils: add new firmware tool for the DIR-300-B1 board
SVN-Revision: 27438
2011-07-04 06:48:42 +00:00
Hauke Mehrtens fbed51a8b5 firmware-utils: fix build on big endian systems
This closes #9446

SVN-Revision: 27255
2011-06-21 21:13:58 +00:00
Gabor Juhos 0d7a558f23 tools/firmware-utils: fix buffalo csum calculation
Also print an error message if decryption fails.

SVN-Revision: 27167
2011-06-13 08:12:41 +00:00
Gabor Juhos 145402e11b tools/firmware-utils: add support for hd_id tag into mkdniimg
Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 27052
2011-05-31 22:53:24 +00:00
Gabor Juhos fb9a672c78 tools/firmware-utils: add buffalo specific fw tools
SVN-Revision: 27050
2011-05-31 22:53:21 +00:00
Florian Fainelli dce13b8c4d bcm63xx: Add firmware helpers for T-Home Speedport W 303V
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26877
2011-05-11 13:34:05 +00:00
Daniel Dickinson f83c5938d2 bcm63xx: Move the OpenWrt rootfs length field
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.

To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.

Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26680
2011-04-15 12:18:25 +00:00
Hauke Mehrtens 869fb691ec firmware-utils: fix endianness bugs in firmware generation program.
Should make it work on big endian systems again, I do not have such a system.

This closes #9093.

SVN-Revision: 26543
2011-04-09 15:06:01 +00:00
Gabor Juhos 72b3c18da1 firmware-utils/mktplinkfw: add support for the TP-Link TL-WA901ND v2 board
Patch-by: Jonathan Benett <jbscience87@gmail.com>

SVN-Revision: 26118
2011-03-13 15:08:29 +00:00
Hauke Mehrtens e08740c747 brcm47xx: fix error when build firmware on x86_64 host (closes #7672)
SVN-Revision: 25472
2011-02-12 13:17:47 +00:00
Gabor Juhos 78ffb50c8e firmware-utils/mkdniimg: don't use NA region by default
SVN-Revision: 24981
2011-01-14 10:37:09 +00:00
Gabor Juhos e116785f27 firmware-utils/wndr3700: allow to specify image magic via command line
SVN-Revision: 24980
2011-01-14 10:37:04 +00:00
Daniel Dickinson fc3a1d0ba3 Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24838
2010-12-26 04:18:13 +00:00
Gabor Juhos 0f659a13dd ar71xx: add support for TL-WR740N v1
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 24811
2010-12-23 12:42:16 +00:00
Gabor Juhos 29379780a6 firmware-utils/mkzynfw: fix available flash space calculation
SVN-Revision: 24653
2010-12-17 20:34:31 +00:00
Gabor Juhos 912a140b19 firmware-utils/mktplinkfw: add support for the TL-MR3220 v1
SVN-Revision: 24438
2010-12-10 17:57:43 +00:00
Hauke Mehrtens 41b3383499 brcm47xx: Add edimax PS1208mfg support
Thank you clemvangelis for the patches. (closes #7672)

SVN-Revision: 24217
2010-12-02 21:27:54 +00:00
Daniel Dickinson eadb5c84fa imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
Daniel Dickinson 6cd4575153 brcm63xx: imagetag: Fixed occaisonal wrong CRC in image due to using strncpy to copy the CRC into the imagetag. strncpy stops copying after a 00 byte, memcpy doesn't.
SVN-Revision: 24000
2010-11-15 04:08:09 +00:00
Gabor Juhos 1d855c0890 firmware-utils/mktplinkfw: add support for the TL-MR3420 v1
SVN-Revision: 23137
2010-09-27 14:54:02 +00:00
Gabor Juhos 142fb3e229 firmware-utils/mktplinkfw: add support for the TL-WR841N v7
SVN-Revision: 23133
2010-09-27 14:53:51 +00:00
Michael Büsch f40f0c001e Zcomax device firmware tool endianness fix
SVN-Revision: 22885
2010-09-04 05:40:56 +00:00
Gabor Juhos 7bf8159991 tools/firmware-utils: new tool for the Zcomax devices
SVN-Revision: 22883
2010-09-03 18:14:40 +00:00
Hauke Mehrtens 7640f89045 brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/

This closes #7702.

SVN-Revision: 22516
2010-08-06 20:21:32 +00:00
Hauke Mehrtens da7493d8f9 mostly revert commit r22396
CFE does not boot images generated with these checksums because of
wrong checksum.

After flashing then with tftp to my Asus wl500-GPv1 the following messages
are show:
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)

SVN-Revision: 22418
2010-07-30 21:19:49 +00:00
Michael Büsch 02549b0448 firmware-utils/trx: Endianness fixes
SVN-Revision: 22414
2010-07-29 18:14:10 +00:00