25ac1447ed
tools/firmware-utils: add tool for DIR-651-H1 firmware generation
...
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
SVN-Revision: 33204
2012-08-17 17:56:02 +00:00
cf1698c637
use HOST_STATIC_LINKING instead of hardcoding -static
...
SVN-Revision: 33140
2012-08-12 12:34:30 +00:00
e2e55d7acd
firmware-utils: link statically
...
SVN-Revision: 33117
2012-08-10 19:27:08 +00:00
fb81e7a802
adds mkdapimg
...
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32822
2012-07-24 20:38:49 +00:00
cd1a204365
Support booting the Speedport W502V using BRN-BOOT.
...
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1 .
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
ccb6b0a063
tools: clean up Makefiles / make ccache work
...
SVN-Revision: 29754
2012-01-15 11:43:13 +00:00
aadbbc4bac
Add firmware tool for generating factory images for Edimax devices
...
SVN-Revision: 28688
2011-10-30 22:57:41 +00:00
9d980dc121
tools/firmware-utils: add yet another buffalo tool
...
SVN-Revision: 27475
2011-07-06 08:04:53 +00:00
1c5b7d0a32
tools/firmware-utils: add new firmware tool for the DIR-300-B1 board
...
SVN-Revision: 27438
2011-07-04 06:48:42 +00:00
fb9a672c78
tools/firmware-utils: add buffalo specific fw tools
...
SVN-Revision: 27050
2011-05-31 22:53:21 +00:00
dce13b8c4d
bcm63xx: Add firmware helpers for T-Home Speedport W 303V
...
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26877
2011-05-11 13:34:05 +00:00
41b3383499
brcm47xx: Add edimax PS1208mfg support
...
Thank you clemvangelis for the patches. (closes #7672 )
SVN-Revision: 24217
2010-12-02 21:27:54 +00:00
eadb5c84fa
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
...
SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
7bf8159991
tools/firmware-utils: new tool for the Zcomax devices
...
SVN-Revision: 22883
2010-09-03 18:14:40 +00:00
7640f89045
brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
...
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/
This closes #7702 .
SVN-Revision: 22516
2010-08-06 20:21:32 +00:00
39fa664f99
Revert r21806 there are no users of it yet
...
SVN-Revision: 21808
2010-06-14 21:49:03 +00:00
3a332f39de
add hcsmakeimage, for cable modems/routers based on bcm33xx
...
SVN-Revision: 21806
2010-06-14 21:47:21 +00:00
04a4638910
add mktitanimg to create Titan (AR7-based) images ( #6632 )
...
SVN-Revision: 21689
2010-06-06 19:16:43 +00:00
14f6a53b6d
firmware-utils: unify cc and cc2 macros, simplifies Makefile
...
SVN-Revision: 19487
2010-02-01 01:56:02 +00:00
e0933ce6e6
firmware-utils: copy bcm_tag.h to src/ and get rid of cc3 macro, fixes imagetag compilation
...
SVN-Revision: 19485
2010-02-01 01:17:46 +00:00
6d2fa1c896
ar71xx: create images for the WNDR3700, which can be flashed via the factory web interface
...
SVN-Revision: 18571
2009-11-28 09:28:25 +00:00
09b5ed9641
firmware-utils: add WNDR3700 image fixing tool (thanks to Anael Orlinski)
...
SVN-Revision: 18569
2009-11-28 08:25:53 +00:00
86d7900724
firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)
...
SVN-Revision: 16792
2009-07-12 08:59:18 +00:00
c79ee4222e
firmware-utils: add a tool to compute crc value for the 5gxi firmware
...
SVN-Revision: 16557
2009-06-25 09:41:06 +00:00
c1a4eef483
firmware-utils: add a file {en,de}cryption tool, based on the PC1 encryption algrithm
...
SVN-Revision: 16550
2009-06-24 16:35:38 +00:00
a6d8f8be9e
firmware-utils: add a small utility for generating nand flash images with ecc info
...
SVN-Revision: 16458
2009-06-14 20:42:28 +00:00
01118457e8
rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson ( fixes #4987 ).
...
SVN-Revision: 16393
2009-06-09 08:04:52 +00:00
34ad500e2c
tools/firmware-utils: Added encode_crc, for Freecom devices.
...
SVN-Revision: 14961
2009-03-22 11:39:32 +00:00
4a518ddf1c
firmware-utils: add new firmware generation tool for the TP-LINK TL-WR941ND device
...
SVN-Revision: 14672
2009-02-26 16:59:15 +00:00
7eb1589875
build system refactoring in preparation for allowing packages to do host-build steps
...
SVN-Revision: 14610
2009-02-22 04:37:20 +00:00
03f3002a17
firmware-utils/mkplanexfw: new firmware generation tool for the Planex MZK-W04NU device
...
SVN-Revision: 14410
2009-02-04 21:09:06 +00:00
15c130c762
Add makeamitbin to generate images for other RDC-based devices, thanks sn9 !
...
SVN-Revision: 13056
2008-10-28 16:26:42 +00:00
a1f36eaa94
firmware-utils: new firmware generation tool for the WILIGEAR WBD-111
...
SVN-Revision: 12975
2008-10-13 17:17:19 +00:00
7e159bbc61
replacement of the add_header utility used by various vendors
...
SVN-Revision: 11588
2008-06-27 12:18:31 +00:00
301ee97229
bcm963xx: add cfe image tagging utility
...
This replaces the proprietary bcmImageBuilder program from the Broadcom source
drops. It basically adds a 256 bytes header in front of the kernel + rootfs
which contains a few text signatures, the locations of the data as well as the
checksums of the data and the tag. It also adds a 12 bytes header in front of
the LZMA kernel which contains the load address, kernel entry and the size of
the compressed LZMA data.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11170
2008-05-18 17:29:51 +00:00
3612b1e7c0
buld images for the Ubiquiti LiteStation and NanoStation ported from http://atheros.openwrt.net . Tested on a Nanostation 2 with airos 3
...
SVN-Revision: 11061
2008-05-07 23:47:17 +00:00
4ee4c6f3f5
firmware-utils: new firmware generation tool for the Cellvision CAS-6xx/NFS-xxx devices
...
SVN-Revision: 10306
2008-01-29 08:31:54 +00:00
93575b53a7
Use $(CP) instead of $(INSTALL_BIN) for binaries.
...
Signed-off-by: Andy Boyett <agb-openwrt@padded-cell.net>
SVN-Revision: 9694
2007-12-09 18:53:06 +00:00
6bf1f9a467
ar7: add eva image generation (thanks Axel Gembe)
...
SVN-Revision: 9401
2007-10-22 14:20:02 +00:00
c6bc77ea36
build system cleanup/restructuring as described in http://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html
...
SVN-Revision: 8362
2007-08-07 00:04:25 +00:00
d1f4e5ba7f
add firmware generation tool for ZyXEL boards
...
SVN-Revision: 8318
2007-08-02 19:05:28 +00:00
324c12d220
host-build.mk used incorrectly
...
SVN-Revision: 7156
2007-05-10 07:02:04 +00:00
c2d893e891
Remove useless mksyshdr utility, replaced by mkcsysimg, Edimax images are no longer broken, and have been tested
...
SVN-Revision: 6847
2007-04-03 09:50:17 +00:00
305d012ea6
Add ADM5120 based edimax image generation utilities
...
SVN-Revision: 6840
2007-04-02 17:10:48 +00:00
4bb721a186
Add firmware generation for other Compex boards based on myloader, thanks to Juhos Gabor !
...
SVN-Revision: 6640
2007-03-22 21:36:15 +00:00
5e7833d044
Add image generation for edimax routers
...
SVN-Revision: 6627
2007-03-21 15:04:07 +00:00
3dbd8ff32f
Add srec2bin to firmware-utils
...
SVN-Revision: 6599
2007-03-18 09:33:39 +00:00
71b50f88fa
Add airlink firmware generation tool, thanks to Vassily Galinsky for that !
...
SVN-Revision: 5760
2006-12-11 17:49:05 +00:00
cf52f51b85
remove custom partition table hack, add ptgen utility for generating partition tables
...
SVN-Revision: 5704
2006-12-07 00:26:26 +00:00
ebdcc6d40c
move target/utils to tools/firmware-utils
...
SVN-Revision: 5702
2006-12-06 23:41:38 +00:00
Gabor Juhos
Jo-Philipp Wich
John Crispin
Vasilis Tsiligiannis
Florian Fainelli
Hauke Mehrtens
Daniel Dickinson
Felix Fietkau
Rod Whitby
Imre Kaloz
Travis Kemen
Eugene Konev
Mike Baker