e67f4477bb
kernel: update linux 3.0 to 3.0.18
...
SVN-Revision: 29965
2012-01-31 09:43:53 +00:00
d1c07b3657
brcm47xx: add fix for cardbus host controller
...
These devices have two devices on the bus, the host controller itself and the device.
SVN-Revision: 29923
2012-01-27 20:10:51 +00:00
26d4e1876c
brcm47xx: add support for pcie host controller on bcma based SoCs.
...
This also adds minimal support for the BCMA43224 pcie wireless card.
SVN-Revision: 29843
2012-01-21 22:39:20 +00:00
034cf5643f
brcm47xx: add support for kernel 3.2
...
SVN-Revision: 29756
2012-01-15 21:18:34 +00:00
c3d134af12
brcm47xx: run kernel_oldconfig
...
SVN-Revision: 29755
2012-01-15 14:53:32 +00:00
d5bc3a994b
brcm47xx: update usb driver
...
Add workarround for BCM5357 and BCM4749.
This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
kmalloc'ed is never freed anywhere while platform_device_add_resources
will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
CONFIG_PM is selected.
SVN-Revision: 29734
2012-01-13 20:11:23 +00:00
e49d3e1d5b
kernel: update linux 3.0 to 3.0.17
...
SVN-Revision: 29725
2012-01-13 14:10:44 +00:00
11125d68ed
brcm47xx: fix usb on more recent bcma based devices.
...
SVN-Revision: 29605
2011-12-23 17:21:52 +00:00
0cd03df3b1
brcm47xx: remove patch starting adding brcm4716 to ssb
...
brcm4716 is supported by bcma now we do not need this patch
SVN-Revision: 29576
2011-12-19 23:55:20 +00:00
5b8686c303
brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
...
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.
SVN-Revision: 29575
2011-12-19 23:39:13 +00:00
1aa5a61754
kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
...
SVN-Revision: 29574
2011-12-19 23:33:03 +00:00
91d0ef6f19
brcm47xx: remove support for kernel 2.6.39
...
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.
SVN-Revision: 29573
2011-12-19 23:26:15 +00:00
6e2ae90f4a
linux: update 3.0 to 3.0.12
...
SVN-Revision: 29469
2011-12-06 19:50:25 +00:00
8bac0df4ae
linux: update 3.0 to 3.0.9
...
SVN-Revision: 29264
2011-11-19 18:39:12 +00:00
de7cae82e9
brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit
...
SVN-Revision: 28585
2011-10-25 16:19:52 +00:00
a9e64493d8
target: globally disable BSD process accounting
...
SVN-Revision: 28584
2011-10-25 16:18:36 +00:00
3802769ea1
add vlan definitions for Siemens SE505v2
...
Hi,
this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.
It also fixes two whitespace issues.
Tested with brcm47xx on both trunk and backfire branch and works as
expected.
Signed-off-by: Manuel Munz <freifunk@somakoma.de>
SVN-Revision: 28336
2011-09-30 12:55:33 +00:00
24dfe525c2
brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default
...
SVN-Revision: 28125
2011-08-29 21:23:51 +00:00
464539b074
kernel: update to version 3.0.3
...
SVN-Revision: 28043
2011-08-18 12:54:12 +00:00
ebb152295b
fix the default network configuration for the ASUS WL-330gE ( #8751 )
...
SVN-Revision: 28024
2011-08-17 03:16:59 +00:00
77218b0338
brcm47xx: fix flash detection on chipcommon less devices.
...
This closes #9906
Thank you for the report Kim
SVN-Revision: 27967
2011-08-12 16:37:22 +00:00
51be984655
kernel: update to kernel version 3.0.1
...
SVN-Revision: 27918
2011-08-06 09:51:55 +00:00
77966b81d8
brcm47xx: use kernel 3.0
...
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported.
SVN-Revision: 27906
2011-08-04 20:10:24 +00:00
8428ebd8e8
brcm47xx: update patches
...
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates
SVN-Revision: 27902
2011-08-04 20:04:54 +00:00
4815eaa4c3
brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci
...
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.
SVN-Revision: 27758
2011-07-24 15:18:29 +00:00
49f4d4217e
brcm47xx: build bcma into the kernel
...
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.
SVN-Revision: 27733
2011-07-23 11:19:58 +00:00
b07b5fc7b6
brcm47xx: remove old kernel versions
...
SVN-Revision: 27724
2011-07-22 18:41:24 +00:00
b988168906
brcm47xx: update bcma and ssb to master-2011-07-21
...
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus
SVN-Revision: 27723
2011-07-22 16:30:42 +00:00
39f491e479
kernel: update to linux-3.0 and refresh patches.
...
Thank you Peter Wagner for the patch
SVN-Revision: 27722
2011-07-22 16:04:25 +00:00
8976fa2622
brcm47xx: deactivate wndr3400 for now as this device will not boot
...
SVN-Revision: 27316
2011-06-29 17:42:34 +00:00
8c62c5d109
brcm47xx: generate image to flash on Netgear WNDR3400.
...
The image will not boot because serial flash support is missing this is only for experts.
SVN-Revision: 27302
2011-06-28 22:23:21 +00:00
4c18da3df6
brcm47xx: add initial support for devices with bcma bus.
...
Ethernet and wifi are not working and this is highly experimental.
SVN-Revision: 27301
2011-06-28 22:21:57 +00:00
3f0eed15a2
kernel: refresh patches for kernel 3.0-rc5
...
SVN-Revision: 27300
2011-06-28 20:25:39 +00:00
2af4f6f634
kernel: update ssb and bcma to linux-next next-20110628
...
SVN-Revision: 27299
2011-06-28 19:33:50 +00:00
c5821c1a3a
kernel: update kernel to 2.6.39.2
...
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
4c392185a6
brcm47xx: update kernel to version 2.6.39
...
SVN-Revision: 27296
2011-06-27 21:29:20 +00:00
ca979845cc
kernel: update ssb and bcma to linux-next next-20110627
...
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
e439de144f
brcm47xx: fix Linux-3.0 and fix clock rate detection.
...
SVN-Revision: 27294
2011-06-27 20:20:11 +00:00
47e218c426
brcm47xx: refresh patches
...
SVN-Revision: 27219
2011-06-18 15:53:14 +00:00
79a7343560
kernel: update to kernel 2.6.38.8
...
SVN-Revision: 27218
2011-06-18 15:52:15 +00:00
75f9e0c615
brcm47xx: add support for kernel 3.0
...
SVN-Revision: 27217
2011-06-18 15:24:44 +00:00
bf64ac730a
bcm47xx: Remove kernel checks from image Makefile
...
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27185
2011-06-15 21:11:49 +00:00
8137e35a5d
brcm47xx: initial 2.6.39 support for brcm47xx
...
Thank you Peter Wagner for the patch
SVN-Revision: 27008
2011-05-25 19:27:08 +00:00
f5f989e3fb
brcm47xx: remove old kernel
...
SVN-Revision: 27006
2011-05-25 18:05:54 +00:00
06166b01dd
brcm47xx: fix partition layout on SimpleShare devices.
...
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.
This fixes #9323
Thank you Will Holmes for the patch.
SVN-Revision: 27005
2011-05-25 17:46:34 +00:00
732abc44cc
brcm47xx: update patches
...
SVN-Revision: 26846
2011-05-07 12:49:17 +00:00
fcb1557a3e
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
...
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
54fb8868fa
brcm47xx: fix typo in patch
...
SVN-Revision: 26828
2011-05-05 13:18:35 +00:00
3dbb8c5088
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
8b837430f3
brcm47xx: upgrade to kernel 2.6.27.6.
...
This should be save now.
SVN-Revision: 26533
2011-04-08 15:12:08 +00:00
Jonas Gorski
Hauke Mehrtens
Jo-Philipp Wich
Florian Fainelli
Felix Fietkau