hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
21,397 Commits
4 Branches
8 Tags
169 MiB
Commit Graph

8620 Commits (847afa343fce680e84bbfdfbf7890af3b7e62e75)

Author SHA1 Message Date
Florian Fainelli f8386ecbc6 cleanup image generation 
SVN-Revision: 33065
 2012-08-08 21:50:55 +00:00
John Crispin 64b385dda7 pci gpio mapping 
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 33054
 2012-08-08 12:14:43 +00:00
Jonas Gorski 4feeda756e bcm63xx: fix USB base registers and IRQs for BCM6328 
SVN-Revision: 33005
 2012-08-05 23:18:22 +00:00
Hauke Mehrtens a0fb060211 update tg3 driver 
SVN-Revision: 33004
 2012-08-05 20:27:40 +00:00
Hauke Mehrtens 35661401da generate image for Linksys e3200 
SVN-Revision: 33003
 2012-08-05 13:14:00 +00:00
Hauke Mehrtens a71f347c30 brcm47xx: update gpio patch 
SVN-Revision: 33001
 2012-08-05 12:40:05 +00:00
Hauke Mehrtens 1d40a652ee brcm47xx: fix patch which moves the flash struct in wgt634u code 
SVN-Revision: 33000
 2012-08-05 12:39:15 +00:00
John Crispin 5f438c3565 W502V/ARV4525 wireless mac bugfix 
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
 2012-08-04 20:14:52 +00:00
Hauke Mehrtens 0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself. 
SVN-Revision: 32992
 2012-08-04 19:46:25 +00:00
John Crispin 060b161ca6 cleanup patches 
SVN-Revision: 32953
 2012-08-03 08:53:02 +00:00
Florian Fainelli 162e272b4b nuport-mac: properly protect the phy interrupt handler 
SVN-Revision: 32951
 2012-08-02 18:13:17 +00:00
John Crispin f45132d1d4 Codel: avoid a nul rec_inv_sqrt 
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 32950
 2012-08-02 13:39:50 +00:00
John Crispin c2d3274ffc fixes i2c clock enable 
SVN-Revision: 32949
 2012-08-02 13:29:49 +00:00
Gabor Juhos e320a7e649 ar71xx: simplify misc IRQ handling 
SVN-Revision: 32948
 2012-08-02 11:25:49 +00:00
Gabor Juhos 3e1e52a524 ar71xx: fix AR934X_EHCI_SIZE 
SVN-Revision: 32947
 2012-08-02 11:25:46 +00:00
Gabor Juhos b873051706 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND 
SVN-Revision: 32946
 2012-08-02 09:54:41 +00:00
Gabor Juhos e29d6bec6f ar71xx: image: allow to use board specific code in the lzma-loader 
SVN-Revision: 32945
 2012-08-02 09:54:33 +00:00
Gabor Juhos 79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board 
SVN-Revision: 32944
 2012-08-02 09:54:28 +00:00
Gabor Juhos e2782eae8e generic: rtl836x: add hw_reset field to struct rtl8366_smi 
It will be used to start/stop the switch if that is
supported by the given board.

SVN-Revision: 32943
 2012-08-02 09:54:21 +00:00
Gabor Juhos 614ca3cc9e generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls 
SVN-Revision: 32942
 2012-08-02 09:54:13 +00:00
Florian Fainelli 9f011e7225 add missing netmask to the network config 
SVN-Revision: 32941
 2012-08-01 22:09:13 +00:00
Florian Fainelli 5133a44785 assume the link is up and full-duplex by default 
SVN-Revision: 32940
 2012-08-01 21:56:54 +00:00
Florian Fainelli 56aac45139 add a default and suitable network config file 
SVN-Revision: 32939
 2012-08-01 21:56:49 +00:00
Gabor Juhos 563400ef10 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
 2012-08-01 12:24:57 +00:00
Gabor Juhos 8eabe64e6b ar71xx: ew-dorin: added USB support 
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32933
 2012-08-01 12:24:56 +00:00
Gabor Juhos 1af4fd7660 ar71xx: Buffalo WLAE-AG300N wireless led patch 
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32932
 2012-08-01 12:24:54 +00:00
Gabor Juhos 010aec0619 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
 2012-08-01 12:24:52 +00:00
Florian Fainelli df48d71d72 resync defconfig enable XZ compression 
SVN-Revision: 32930
 2012-08-01 12:01:27 +00:00
Florian Fainelli 3cd753408d properly generate squashfs, jffs2 and initramfs images and kernels 
SVN-Revision: 32927
 2012-07-31 23:09:50 +00:00
Florian Fainelli c0561a42e7 disable crashlog on ARM platforms for the moment 
It is currently badly broken on ARM, until fixed, disable it

SVN-Revision: 32926
 2012-07-31 23:09:46 +00:00
John Crispin f5f36911f0 add lantiq svip support 
SVN-Revision: 32925
 2012-07-31 18:49:54 +00:00
Jonas Gorski 07c4524d33 bcm63xx: Add nb6 support (BCM6362 SoC base boards) 
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

SVN-Revision: 32924
 2012-07-31 14:27:47 +00:00
Jonas Gorski 820c224029 bcm63xx: add basic bcm6362 support 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32923
 2012-07-31 14:27:42 +00:00
Jonas Gorski dcd339ac9d bcm63xx: enable usb for bcm6328 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32922
 2012-07-31 14:27:34 +00:00
Jonas Gorski 94d257a851 bcm63xx: update enetswitch driver 
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
 2012-07-31 14:27:31 +00:00
Jonas Gorski fa75bd977a bcm63xx: reorder patches 
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
 2012-07-31 14:27:25 +00:00
Florian Fainelli d1ab4df0d6 move i2c module to target modules.mk 
SVN-Revision: 32910
 2012-07-29 13:20:51 +00:00
Florian Fainelli a5738c960a resync config 
SVN-Revision: 32908
 2012-07-29 13:20:39 +00:00
Florian Fainelli 17244dea00 use the same description as other omap platforms (without the dash) 
SVN-Revision: 32907
 2012-07-29 13:20:35 +00:00
John Crispin ee0946a5f4 refresh pwm patch 
SVN-Revision: 32905
 2012-07-29 11:53:06 +00:00
John Crispin 101766fb00 clean up pwm patches and drivers 
SVN-Revision: 32901
 2012-07-28 20:47:08 +00:00
Hauke Mehrtens f0fe59648a add config option CONFIG_I2C_MV64XXX to fix kirkwood build 
SVN-Revision: 32898
 2012-07-28 11:36:52 +00:00
Florian Fainelli 67891c26ec resync config 
SVN-Revision: 32895
 2012-07-27 15:35:15 +00:00
Florian Fainelli a4d699ccf0 fix DVA-G3810BN image generation 
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
 2012-07-27 15:35:12 +00:00
Florian Fainelli c6813d33f3 add D-link DVA-G3810BN-TL-1 support 
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
 2012-07-27 15:35:09 +00:00
Florian Fainelli 18206793b2 Add CT6376-1 board support 
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
 2012-07-27 15:35:05 +00:00
Florian Fainelli 4acdbb1d87 Add brcmsmac profile 
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32890
 2012-07-27 15:34:57 +00:00
John Crispin 0ba7b18cfd Add leds back after migration to sysfs 
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>

SVN-Revision: 32885
 2012-07-26 17:06:55 +00:00
Florian Fainelli 46611b2cbf add more missing config symbols 
SVN-Revision: 32884
 2012-07-26 17:03:08 +00:00
Florian Fainelli ac30beaaa7 add more USB-related config symbols 
SVN-Revision: 32883
 2012-07-26 17:03:05 +00:00
Florian Fainelli a077e785cf make sure target modules depend on the target 
SVN-Revision: 32882
 2012-07-26 17:03:02 +00:00
Hauke Mehrtens 0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16 
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
 2012-07-26 15:42:18 +00:00
John Crispin 87a72d68f1 fix typo in modules.mk 
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32870
 2012-07-25 19:52:30 +00:00
Florian Fainelli d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 
SVN-Revision: 32869
 2012-07-25 19:36:19 +00:00
Florian Fainelli adc2b21be8 move isp116x driver to target specific modules.mk 
SVN-Revision: 32865
 2012-07-25 15:50:45 +00:00
Florian Fainelli 1627b2bb4b move rt305x-dwc driver to target specific modules.mk 
SVN-Revision: 32864
 2012-07-25 15:50:42 +00:00
Florian Fainelli c7a69869f7 move ubsec-ssb driver to target specific modules.mk 
SVN-Revision: 32863
 2012-07-25 15:50:38 +00:00
Florian Fainelli d1b2087a35 move ssb-gige to target specific modules.mk 
SVN-Revision: 32862
 2012-07-25 15:50:36 +00:00
Florian Fainelli c14d907b8b move usb driver to target specific modules.mk 
SVN-Revision: 32861
 2012-07-25 15:50:33 +00:00
Florian Fainelli 3b5a8548f4 move mmc driver to target specific modules.mk 
SVN-Revision: 32859
 2012-07-25 15:50:26 +00:00
Florian Fainelli 18038c803c move ixp4xx-eth to target specific modules.mk 
SVN-Revision: 32858
 2012-07-25 15:50:23 +00:00
Florian Fainelli 4000de357e move crypto module to target specific modules.mk 
SVN-Revision: 32856
 2012-07-25 15:50:16 +00:00
Florian Fainelli a282e37c09 move i2c driver to target modules.mk 
SVN-Revision: 32855
 2012-07-25 15:50:13 +00:00
Florian Fainelli accbc20045 move watchdog driver to target specific modules.mk 
SVN-Revision: 32854
 2012-07-25 15:50:10 +00:00
Florian Fainelli 23ffbad602 move target specific spi modules 
SVN-Revision: 32853
 2012-07-25 15:50:04 +00:00
Florian Fainelli 1859500829 move target specific leds modules to ar71xx modules.mk 
SVN-Revision: 32852
 2012-07-25 15:50:02 +00:00
Florian Fainelli c3b9a987b7 move leds modules back to target modules.mk 
SVN-Revision: 32851
 2012-07-25 15:49:57 +00:00
Florian Fainelli bca45d6d8a move i2c modules back to target modules.mk 
SVN-Revision: 32850
 2012-07-25 15:49:54 +00:00
Florian Fainelli 2bfb2a797c move more x86-specific modules back to target modules.mk 
SVN-Revision: 32848
 2012-07-25 15:49:49 +00:00
Florian Fainelli d973768580 move x86 specific ide/pata modules to x86' modules.mk 
SVN-Revision: 32846
 2012-07-25 15:49:42 +00:00
Hauke Mehrtens e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. 
SVN-Revision: 32845
 2012-07-25 14:52:00 +00:00
Florian Fainelli ab2cb9ce61 add yet another framebuffer symbol 
SVN-Revision: 32844
 2012-07-25 14:01:57 +00:00
Florian Fainelli 89a312bf48 split framebuffer helper modules to their own packages 
SVN-Revision: 32843
 2012-07-25 14:01:54 +00:00
Florian Fainelli ba9f6a46b1 remove broken flag 
SVN-Revision: 32842
 2012-07-25 14:01:51 +00:00
Florian Fainelli 03c06178e3 package buttons driver separately 
SVN-Revision: 32841
 2012-07-25 14:01:49 +00:00
Florian Fainelli 83b7462ac9 package cobalt lcd as a module 
SVN-Revision: 32840
 2012-07-25 14:01:46 +00:00
John Crispin 7ee4798be2 add unset CONFIG_FB_XGI to fix fullbuilds 
SVN-Revision: 32836
 2012-07-25 09:05:23 +00:00
John Crispin 94a550cc87 cleanup config-3.3, remove =m 
SVN-Revision: 32835
 2012-07-25 09:05:18 +00:00
John Crispin 1cbfa0c0f5 laguna: fix eeprom read buffer size during platform configuration 
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna.  The model name read in is 16 bytes but the original buffer was only 8 bytes.

Signed-off-by: David Acker <dacker@rajant.com>

SVN-Revision: 32833
 2012-07-25 08:01:38 +00:00
John Crispin 0e9e7dcd10 adds target used by rapsberry pi 
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32825
 2012-07-24 20:39:17 +00:00
John Crispin 5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode 
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
 2012-07-24 20:38:55 +00:00
John Crispin 799d6deab0 D-Link DAP-1350 initial support 
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
 2012-07-24 20:38:43 +00:00
John Crispin b891eec700 MI424WR - add rev D support 
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

SVN-Revision: 32820
 2012-07-24 20:38:36 +00:00
John Crispin 03be8d08ac initial LED configuration for Fonera 2.0n 
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
 2012-07-24 20:38:31 +00:00
John Crispin 2d2479a033 add ALL5002 userspace support 
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
 2012-07-24 20:38:14 +00:00
John Crispin e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F. 
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
 2012-07-24 20:38:08 +00:00
John Crispin a65eee9ac3 add image build for ALL5002 
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
 2012-07-24 20:38:03 +00:00
John Crispin 0a08a776fb add support for Allnet ALL5002 to kernel 
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
 2012-07-24 20:37:56 +00:00
John Crispin 6641024f50 uart_clk on Rt3352F is always 40MHz 
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
 2012-07-24 20:37:50 +00:00
Florian Fainelli 93dc8c8d1b move omap specific modules to modules.mk 
SVN-Revision: 32810
 2012-07-24 19:43:54 +00:00
Florian Fainelli 82c7e05d42 move n810 battery module to omap24 modules.mk 
SVN-Revision: 32809
 2012-07-24 19:43:49 +00:00
Florian Fainelli 25e20b0b57 move target specific modules to target's module.mk 
SVN-Revision: 32808
 2012-07-24 19:43:45 +00:00
Florian Fainelli 587f85ac20 package ep93xx framebuffer 
SVN-Revision: 32807
 2012-07-24 19:43:35 +00:00
Florian Fainelli 5915c85d80 remove crypto symbols override 
SVN-Revision: 32806
 2012-07-24 19:43:31 +00:00
Florian Fainelli c238862651 add missing framebuffer related symbols 
SVN-Revision: 32804
 2012-07-24 19:43:23 +00:00
Florian Fainelli 9f55e6f954 remove broken flag, since it works 
SVN-Revision: 32803
 2012-07-24 19:43:19 +00:00
Florian Fainelli c531ce0301 fix sound modules loading order and dependencies 
SVN-Revision: 32802
 2012-07-24 19:43:15 +00:00
Florian Fainelli 598ef2a2e0 package ep93xx touchscreen driver as a module 
SVN-Revision: 32799
 2012-07-24 19:42:49 +00:00
Florian Fainelli 0db5f35846 set DEVICE_TYPE to developerboard 
SVN-Revision: 32798
 2012-07-24 19:42:44 +00:00
John Crispin 5178c177dc rebase config-3.3 
SVN-Revision: 32797
 2012-07-24 17:28:25 +00:00