b679cac641
et131x is out of staging in 3.18
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43827
2015-01-04 18:41:32 +00:00
7996f0b313
packages: kernel: negate kernel version checks
...
Only list the kernel versions that do not match so that new kernel
versions will automatically match. This improves support for kernel
3.18.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43132
2014-10-31 22:02:07 +00:00
dcacd65281
imx6: kernel: add GW16083 Ethernet Expansion Mezzanine support
...
The GW16083 Ethernet Expansion Mezzanine adds the following to supported
Gateworks baseboards:
* 7-port Ethernet Switch
* 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module)
* 2x RJ45 ports or SFP module (ENET5-6) (auto-selected)
This series adds support for a phy driver that adds support for ENET5/ENET6
PHY adding initialization for those PHY's and a polling mechanism that detects
SFP insertion and configuration.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 42147
2014-08-11 20:35:10 +00:00
81eeec8785
kernel: fix kmod-igb dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41656
2014-07-14 18:43:12 +00:00
26a4bdc5cf
kernel: remove stray " from igp module title
...
Fixes #17108 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41645
2014-07-14 14:39:00 +00:00
7e0e5110bc
kernel: add igb kernel module
...
Added igb kernel module which supports a variety of Intel GigE PCIe devices
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 41637
2014-07-14 07:38:48 +00:00
ba54356d49
brcm47xx: deactivate ssb and old phy code for new devices
...
This deactivates ssb and G-PHY code in b43 for the mips74k profile in
brcm47xx.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41594
2014-07-12 15:39:31 +00:00
567e838a45
kernel: make b44 depend on libphy for kernel 3.14
...
In kernel 3.14 a dependency to libphy was added to b44.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40662
2014-05-02 21:10:35 +00:00
c5967446ba
kernel: add a dependency of kmod-r8169 on r8169-firmware
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40448
2014-04-10 14:43:33 +00:00
ac46cbcfc0
kernel: add missing depends on kmod-mii
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39670
2014-02-21 22:57:39 +00:00
8f0ffe9cc6
kernel: negate kernel version dependencies to fix config for new kernel versions
...
This fixes some problems on kernel 3.13 and also removes the reference to LINUX_3_7.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39532
2014-02-08 15:34:12 +00:00
bf662d7cb0
packages: kernel: reverse kernel dependencies logic
...
This will select the correct dependencies also for more recent kernel versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39289
2014-01-14 22:51:30 +00:00
df7e855df0
kernel: add vmxnet3 module
...
support VMware ethernet adapters
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 38840
2013-11-17 16:41:40 +00:00
b81685f0a4
kernel: add missing dependency for kernel 3.12 in tg3
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38605
2013-10-30 09:50:13 +00:00
ec41ca3a47
kernel: make kmod-pcnet32 depend on kmod-mii
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38531
2013-10-25 01:47:45 +00:00
294a57822e
kernel: add mii library kernel module package
...
This package is required for network drivers such as pcnet32
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38530
2013-10-25 01:47:32 +00:00
f12f4074af
kernel: make most modules use AutoProbe
...
now that we have modprobe we can set more than half of the modules to AutoProbe
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38021
2013-09-17 21:45:17 +00:00
f9b790bd55
kernel: kmod-libphy, kmod-tg3: fix load order
...
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37904
2013-09-05 19:57:44 +00:00
0fe808d032
kernel: load libphy before tg3
...
SVN-Revision: 37651
2013-08-01 22:19:19 +00:00
aa81b9ed5f
kernel: be consistent with formatting style
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37545
2013-07-26 01:09:50 +00:00
11c5730695
kernel: fix config breakage from removing the de4x5 tulip driver
...
Properly define the config symbol to n so it doesn't break build for
targets which do have it available (e.g. mostly everything except arm).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37489
2013-07-21 11:08:38 +00:00
4332b7fce5
kernel: remove an exotic ethernet driver from the tulip package which does not build on some platforms
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37486
2013-07-21 08:06:56 +00:00
4dbc5c64fa
kernel: fix kmod-et131x dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37446
2013-07-19 14:53:29 +00:00
f3755ec53c
kernel: kmod-e1000e depends on pip for 3.8+
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37418
2013-07-18 20:40:10 +00:00
ef0b9be95e
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
SVN-Revision: 37284
2013-07-14 12:59:00 +00:00
4ebf19b48f
packages: clean up the package folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37007
2013-06-21 16:54:37 +00:00
Imre Kaloz
Hauke Mehrtens
Luka Perkov
John Crispin
Jonas Gorski
Felix Fietkau
Florian Fainelli