Commit Graph

10235 Commits (7d1cd9dfab5a76ca770e749047491dad57af8489)

Author SHA1 Message Date
Jonas Gorski 7d1cd9dfab bcm63xx: Improve CFE version mod patch.
Fix "cfe-" string length copy.
Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f.
Add support for Huawei CFE versions ("cfe-vd").

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3766/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37101
2013-06-30 13:10:05 +00:00
Jonas Gorski 6df83c3f89 bcm63xx: enable all SoCs for both subtargets
Now that SMP kernels also work on older SoCs, also enable them for SMP.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37100
2013-06-30 13:10:03 +00:00
Jonas Gorski e7d93889d7 bcm63xx: make smp kernels boot on older SoCs
Enhance BMIPS support so SMP kernels work on older chips.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37099
2013-06-30 13:10:00 +00:00
Jonas Gorski 66f8f30f47 bcm63xx: update patches
Update patches with their upstream versions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37098
2013-06-30 13:09:50 +00:00
John Crispin 124ef95f5f lantiq: add v3.9 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37089
2013-06-29 18:16:56 +00:00
John Crispin bfc7007226 lantiq: Add support for loading athxk eeproms through mtd
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37087
2013-06-29 16:33:46 +00:00
John Crispin fe8ecbd972 lantiq: fix kernel config for DEU support
Trying to load the DEU modules results in unresolved symbols. This
provides them. This requires the previous patch to be applied first.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 37086
2013-06-29 16:33:37 +00:00
John Crispin b4f36358ff lantiq: make xrx200 network driver use a tasklet for rx housekeeping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37085
2013-06-29 16:33:28 +00:00
John Crispin aff84655f5 lantiq: remove 3.7 kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37084
2013-06-29 16:33:18 +00:00
John Crispin 6875316646 ramips: unbreak initramfs generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37080
2013-06-29 08:41:03 +00:00
Florian Fainelli 8ea5e19823 targets: fix remaining targets for initramfs builds
Fix some bugs that slipped through while making initramfs non exclusive.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37079
2013-06-28 22:56:34 +00:00
Felix Fietkau 7acb84dde7 kernel: add global menuconfig option to enable kexec support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37073
2013-06-28 11:27:20 +00:00
Felix Fietkau 900f78e3be orion: disable normal router support for the harddisk subtarget
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37069
2013-06-28 11:27:06 +00:00
Felix Fietkau 059003fa90 orion: disable CONFIG_VM_EVENT_COUNTERS by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37068
2013-06-28 11:27:02 +00:00
Felix Fietkau 84ad1782f9 orion: dynamically generate /etc/config/network, the LaCie 2big Network does not use DSA
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37061
2013-06-28 11:26:37 +00:00
Felix Fietkau 6d6296e214 orion: add support for the lacie 2big network device
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37059
2013-06-28 11:26:29 +00:00
John Crispin 77b9fd52a6 ramips: fix ethernet driver
make sure the driver does not crash under load

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37058
2013-06-28 11:22:11 +00:00
Florian Fainelli 6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
John Crispin 36209234ab ramips: fix rt2x00 ethernet compile bug
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37043
2013-06-27 16:45:40 +00:00
John Crispin 0d4e00c337 ramips: add missing symbols to rt288x config
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37042
2013-06-27 16:45:26 +00:00
John Crispin 1706c8d29a ramips: fix ethernet stability issue introduced by recent kernel upgrade
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37041
2013-06-27 16:28:06 +00:00
Zoltan Herpai e5c7a93d71 imx23: add new target for i.MX233-based boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37038
2013-06-27 10:12:03 +00:00
Zoltan Herpai 41ad05299c kernel/generic: add missing regulator symbols for 3.9
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37036
2013-06-26 21:48:17 +00:00
Jonas Gorski 9a077f70de bcm63xx: fix DSL-274xB F1 default network config
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37032
2013-06-24 20:35:54 +00:00
John Crispin 5063f712a6 ramips: move ESW reset to preinit on RT305x/RT5350
RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet
interface, otherwise the driver will panic.
As we already init the ethernet in preinit we therefor need to reset the switch
before that.

Signed-off-by: Felix Kaechele <felix@fetzig.org>

SVN-Revision: 37027
2013-06-24 12:39:28 +00:00
John Crispin d3723f93c6 ramips: make rt3883 usb work properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37024
2013-06-24 12:06:56 +00:00
John Crispin dca18caa79 ramips: revert gpio regulator dts update
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37021
2013-06-24 11:09:50 +00:00
John Crispin 55fb6f3a05 ralink: update patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37016
2013-06-23 15:50:49 +00:00
Felix Fietkau 3df61e8279 kernel: fix a reference counting bug in overlayfs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37014
2013-06-22 14:00:12 +00:00
John Crispin 44b1688e6c lantiq: Tune the XWAY subtarget cflags
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 37006
2013-06-21 16:54:15 +00:00
John Crispin 5d441ae7ea lantiq: set mips16 support.
Set mips16 support in XWAY subtarget.

This patch is based in changeset #36600

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37005
2013-06-21 16:54:07 +00:00
John Crispin 81c57ec131 lantiq: Fix ARV7518 DTS definitions
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37004
2013-06-21 16:54:03 +00:00
John Crispin 67f5f188b1 base-files: input/button drivers get loaded before preinit by procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37000
2013-06-21 16:53:47 +00:00
John Crispin e6ef318802 base-files: diag does not need to insmod any drivers, procd already did it for us
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36999
2013-06-21 16:53:43 +00:00
John Crispin 39df8d1a45 brcm47xx: dont manually insmod switch drivers
Signed-off-by: John Crispin <bloic@openwrt.org>

SVN-Revision: 36993
2013-06-21 16:53:15 +00:00
John Crispin 2be717560a ar71xx: drop procd_init console hack
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36992
2013-06-21 16:53:11 +00:00
Imre Kaloz c228ed04a1 increase kernel partition size to fix boot issues
SVN-Revision: 36982
2013-06-21 10:57:05 +00:00
Florian Fainelli 4ef56823e0 brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8
We currently used 16 DMA Ethernet channels, but the hardware only
supports up to 8 (with 2 per enet and the remaining for USB slave).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36979
2013-06-20 18:47:36 +00:00
Felix Fietkau 2a5e1910d5 linux-3.8: backport a leds-gpio.c crash fix (fixes #13721)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36968
2013-06-18 22:23:38 +00:00
Florian Fainelli 28535aad38 brcm63xx: refresh 3.9 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36958
2013-06-18 10:54:28 +00:00
Florian Fainelli a9d4bdee43 brcm63xx: provide a default sane MAC address for Cable Modem devices
Cable modem devices currently poke at some random location in RAM and
may end up having an invalid MAC address which is not suitable. Provide
a default one which is sane.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36957
2013-06-18 10:54:24 +00:00
Florian Fainelli 8ae2b1155d brcm63xx: create initramfs HCS images
Cable Modem devices cannot load an ELF file directly so we need to
provide them with a HCS image even when targetting initramfs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36954
2013-06-17 22:57:04 +00:00
Florian Fainelli 0ce75bc440 brcm63xx: simplify HCS image creation
$(KDIR)/vmlinux is already a binary image, there is no need to create
another one.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36949
2013-06-17 19:32:56 +00:00
Florian Fainelli 78a66975d6 brcm63xx: remove support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36948
2013-06-17 19:32:47 +00:00
Florian Fainelli d2894412d8 brcm63xx: switch to 3.9 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36947
2013-06-17 19:32:42 +00:00
Florian Fainelli f03bbaf065 brcm63xx: fix missing antislash in BCM6345 ethernet patch
This would cause build failure when disabling support for particular
CPUs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36946
2013-06-17 19:32:35 +00:00
Felix Fietkau d3a7b5633c kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36937
2013-06-15 11:50:50 +00:00
Hauke Mehrtens 9492d445de brcm47xx: run make kernel_oldconfig for 3.9 kernel config
SVN-Revision: 36928
2013-06-12 14:51:50 +00:00
Hauke Mehrtens 87f994d16d brcm47xx: remove support for kernel 3.6
SVN-Revision: 36927
2013-06-12 14:48:45 +00:00
Hauke Mehrtens 990423f3ef brcm47xx: add initial support for kernel 3.9
SVN-Revision: 36926
2013-06-12 14:47:53 +00:00