Commit Graph

6640 Commits (7c932579fa099e0c7a8fbdea763b5526170c99fa)

Author SHA1 Message Date
Jo-Philipp Wich 17f5287b0e hostapd: change wpa_supplicant.sh to pass 64 byte hex psk unquoted and remove the undocumented usepasspharse option, this makes it match the logic of the hostapd setup
SVN-Revision: 32614
2012-07-05 12:25:29 +00:00
Gabor Juhos 79910a3e71 uboot-envtools: OM2P partition information
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32612
2012-07-05 08:26:55 +00:00
Gabor Juhos 518a70f06c package/om-watchdog: add om2p-lc support
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32610
2012-07-05 08:26:52 +00:00
Jo-Philipp Wich 38cb1da868 mtd - remove partition table assumption when writing fis table
When mtd alters the fis partition table it assumes that the first partition
table entry also is the first logical parition table entry. For instance our
table could look like this (irrelevant partitions put aside):
 * vmlinux.bin.l7 0xA8710000
 * rootfs         0xA8030000
Here mtd would assume vmlinux.bin.l7 being the first partition and use its
address to calculate the size and offset which ultimately leads to a broken
partition table.
This patch alters the behavior by checking what partition has the smaller
address to do the calculations based on that address.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32601
2012-07-04 11:56:25 +00:00
Jo-Philipp Wich 0b83775202 mtd - add partition offset parameter
The offset parameter can be used to write the data at the offset
instead of writing it to the beginning of the partition.

Signed-off-by: Marek Linder <lindner_marek@yahoo.de>

SVN-Revision: 32600
2012-07-04 11:37:53 +00:00
Travis Kemen 62d9f257a1 mac80211: make channel bandwidth setting generic
SVN-Revision: 32596
2012-07-04 00:25:46 +00:00
Travis Kemen 9452ad74bb commit patch from https://lists.ath5k.org/pipermail/ath5k-devel/2011-November/005043.html, fixed up for newer ath5k and added in more radios.
SVN-Revision: 32595
2012-07-04 00:09:18 +00:00
Felix Fietkau 5cd249655d ath9k: add a patch to make the hw queue length configurable via debugfs
SVN-Revision: 32589
2012-07-03 21:00:47 +00:00
Gabor Juhos 5ad36ca723 mac80211: add support for AR9550
SVN-Revision: 32588
2012-07-03 18:05:04 +00:00
Jo-Philipp Wich ff3161a6c4 base-files: ensure that /sys is available during sysupgrade, some essential services like om-watchdog need it
SVN-Revision: 32587
2012-07-03 15:43:43 +00:00
Jo-Philipp Wich b2e2de794e 6to4: fix ifname resolving for adv_interface option (#11796)
SVN-Revision: 32576
2012-07-02 12:14:50 +00:00
Jo-Philipp Wich bcacf552fd netifd: repair dhcp client id option Busybox udhcpc dropped support for the -c option, instead it can be emulated by using -x 0x3d:id, change the dhcp protocol script accordingly and filter all colons from the id while we're at it. This change supersedes http://patchwork.openwrt.org/patch/1810/
SVN-Revision: 32573
2012-07-01 12:43:14 +00:00
Jo-Philipp Wich faab751760 dnsmasq: introduce "add_local_hostname" and "add_local_domain" options - add_local_domain defaults to 1 and controls whether the local domain is written as search directive to the local resolv.conf - add_local_hostname defaults to 1 and controls whether A and PTR records are created automatically for the local hostname These change supersedes http://patchwork.openwrt.org/patch/2207/ and http://patchwork.openwrt.org/patch/2208/
SVN-Revision: 32570
2012-07-01 11:32:46 +00:00
Jo-Philipp Wich c49f8068cd package/dnsmasq: permit UCI configuration of --dhcp-fqdn option
This adds a new boolean option, fqdn, to the "config dnsmasq" section of
/etc/config/dhcp. The default is off. When set on, it enables the dhcp-fqdn
option to dnsmasq. dhcp-fqdn causes dnsmasq's DNS server to not resolve
unqualifed local hostnames. The "domain" option is required when using "fqdn".
Local hostnames will remain available for lookup using fully-qualified names.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 32569
2012-07-01 11:32:45 +00:00
Jo-Philipp Wich 7f573ef7e3 package/dnsmasq: permit dhcp_option in global dnsmasq config section
dnsmasq currently permits dhcp_options to be specified only in "config dhcp"
sections of /etc/config/dhcp. When dnsmasq is providing DHCP service for
multiple subnets and there are multiple "config dhcp" sections without "option
ignore", it makes sense to allow dhcp_options that should apply globally in
the "config dnsmasq" section of /etc/config/dhcp. dhcp_option is a list option.

[jow: rework patch to apply after dhcp-option-force handling got introduced]

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 32568
2012-07-01 11:32:29 +00:00
Jo-Philipp Wich 6e419fbdeb Fix extroot by UUID
Extroot works fine when the target device is specified by a path. It fails
however if the device is specified by UUID (the target partition gets mounted
much later by hotplug hooks). This is because the blkid command is no longer
compiled into BusyBox (since changeset [1]) so it's unavailable for the
preinit phase.

The closest bug report I was able to find is [2], although the reporting person
mentions that /tmp/overlay-disabled showed up which wasn't there in my case.

This patch sets PATH and LD_LIBRARY_PATH environment variables so that the
blkid command installed on the target device can be used by that particular
preinit script.

[1] https://dev.openwrt.org/changeset/26245
[2] https://dev.openwrt.org/ticket/10653

Signed-off-by: Jaroslaw Swierczynski <jarek1701@gmail.com>

SVN-Revision: 32567
2012-07-01 11:06:32 +00:00
Jo-Philipp Wich 5d3f21904f kernel/modules: load pppol2tp after pppox
l2tp_ppp needs to be loaded after pppox, otherwise it ends up like this:
l2tp_ppp: Unknown symbol pppox_ioctl (err 0)
...
during boot.
I also fixed the dependency, it should be pppox rather than pppoe.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32562
2012-07-01 10:34:45 +00:00
Jo-Philipp Wich b2e5c5f82e base-files: implement network_get_dnsserver() and network_get_dnssearch() in /lib/functions/network.sh
SVN-Revision: 32531
2012-06-29 19:04:11 +00:00
Felix Fietkau 5c49ad2096 ath9k: revert an upstream initval update to fix a rx sensitivity regression on ar9380 (fixes #11756)
SVN-Revision: 32528
2012-06-29 17:59:39 +00:00
Jo-Philipp Wich e654014352 base-files: only consider enabled default routes when finding the wan iface (#11774)
SVN-Revision: 32525
2012-06-29 11:58:35 +00:00
Jo-Philipp Wich 1f8d8dca76 netifd: update to current git head, exposes enabled state, mtu and metric overrides for routes
SVN-Revision: 32524
2012-06-29 11:42:15 +00:00
Felix Fietkau dd80e8de1f ath9k: de-duplicate initvals, reduces uncompressed binary size by 24 KB
SVN-Revision: 32517
2012-06-28 00:34:19 +00:00
Felix Fietkau 669e79a45b ath9k: update the ar934x initvals
SVN-Revision: 32516
2012-06-27 22:32:56 +00:00
Felix Fietkau cbf93f02ba ath9k: remove the queue length limiting patch, the approach was experimental, not used by default and a different solution is required
SVN-Revision: 32515
2012-06-27 22:32:51 +00:00
Felix Fietkau 6c2a295245 base-files: enable TCP timestamps, enable sack/dsack. (patch by Dave Täht)
A year of testing in the cerowrt project shows not using timestamps
to be a very bad idea in nearly any TCP at speeds above a few Mbit.

Lastly sack/dsack help on recovery from larger amounts of packet
loss.

SVN-Revision: 32513
2012-06-27 22:32:44 +00:00
Felix Fietkau 0615bde13a ath9k: improve ani behavior during scanning
SVN-Revision: 32511
2012-06-27 12:45:00 +00:00
Felix Fietkau d4c6868027 ath9k: more ani fixes
SVN-Revision: 32510
2012-06-27 02:15:25 +00:00
Felix Fietkau 1e884c0923 ath9k: enable rx for tx antennas earlier (and only for multi-stream devices) to fix some validation corner cases
SVN-Revision: 32509
2012-06-27 01:29:56 +00:00
Felix Fietkau d20470702f ath9k: make antenna mask validation more flexible, allow arbitrary tx chain combinations, enable rx for chains that have enabled tx as well, fix using the second antenna for single-stream diversity based devices
SVN-Revision: 32508
2012-06-27 01:23:17 +00:00
Felix Fietkau 3d83a7b636 ath9k: reject invalid antenna mask configurations
SVN-Revision: 32507
2012-06-27 01:10:18 +00:00
Felix Fietkau 2479910d45 netifd: update to latest version, fixes bridge member interface settings
SVN-Revision: 32506
2012-06-26 23:34:07 +00:00
Jo-Philipp Wich bc41cc82ec broadcom-wl: fix WDS hotplug for multiple networks
SVN-Revision: 32505
2012-06-26 15:43:09 +00:00
Jo-Philipp Wich 089a80ae55 linux-atm: remove defunct ipoa protocol support
SVN-Revision: 32504
2012-06-26 15:40:03 +00:00
Jo-Philipp Wich f2dde4f5ba base-files: allow wireless ifaces to be part of multiple networks
SVN-Revision: 32503
2012-06-26 15:25:33 +00:00
Felix Fietkau 8e1583475d ath9k: fix a dynamic WEP related regression
SVN-Revision: 32492
2012-06-23 17:30:45 +00:00
Felix Fietkau 0b88abd58d ath9k: merge a patch for improving ad-hoc mode performance
SVN-Revision: 32491
2012-06-23 17:30:40 +00:00
Jo-Philipp Wich 7ed9369cb3 ppp: the pptp buffering option is not supported anymore, remove it
SVN-Revision: 32482
2012-06-21 19:41:47 +00:00
Felix Fietkau 3143f03568 toolchain: move eglibc-files from base-files to toolchain, it is packaged as part of the libc package
SVN-Revision: 32467
2012-06-20 13:45:01 +00:00
Vasilis Tsiligiannis 82dc07f6f2 busybox: Enable ibs, obs and conv options on 'dd'
SVN-Revision: 32464
2012-06-19 22:34:49 +00:00
Jo-Philipp Wich 6387e8e458 ppp: annotate most patches with description and S-o-b
SVN-Revision: 32463
2012-06-19 17:03:24 +00:00
Felix Fietkau 431e612d9e mac80211: fix linux 3.5 compatibility
SVN-Revision: 32449
2012-06-19 00:59:19 +00:00
Felix Fietkau 5e204a09cf mac80211: fix AP multi-BSSID support (#11698)
SVN-Revision: 32448
2012-06-19 00:53:20 +00:00
Jo-Philipp Wich 231f5ebb28 zlib fix for btrfs
Hi,

yes, it is true...

In the standard, unpatched trunk is zlib_inflate.ko compiled, but not included
in any package... So, my previous version was functional, but with system bug.

Here is fixed patch.

On Wed, Jun 13, 2012 at 05:00:02PM +0200, Jo-Philipp Wich wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> - -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi.
>
> Shouldn't you also add CONFIG_ZLIB_DEFLATE to KCONFIG then?
>
> ~ Jow
> - -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.12 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iEYEARECAAYFAk/YqrcACgkQdputYINPTPM6dgCfYDgzK1XHiKDJNSdc/+HgIoRp
> HSgAoKdUxcqXzHqTLiyEkiQqCnDuuVmu
> =0DUX
> - -----END PGP SIGNATURE-----
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.12 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iEYEARECAAYFAk/YqvIACgkQdputYINPTPNMagCePNwPSYHfoCd5eXywQ+sTATqQ
> 2CQAoJW/Fez+DqflHlJVcvng/LvsfrCm
> =s6B0
> -----END PGP SIGNATURE-----
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Signed-off-by: Michal Heppler <mhepp@ics.muni.cz>

SVN-Revision: 32444
2012-06-18 23:59:57 +00:00
Jo-Philipp Wich c2b78f87d9 openssl does not compile with uml and arch x86_64
Hi,

I found that openssl did not compile on the uml target under x86_64. The
attached patch should
correct this and is working for me. Is this the right way to do it?

thanks,
Thomas

SVN-Revision: 32443
2012-06-18 23:54:08 +00:00
Felix Fietkau cfe79471d1 kmod-ipt-nathelper-extra: fix missing nf_conntrack_broadcast.ko
kmod-ipt-nathelper-extra is missing the package nf_conntrack_broadcast.ko

if it is not included into the kmod-ipt-nathelper-extra packge the modules
nf_conntrack_snmp and nf_nat_snmp_basic cant get loaded:

[   44.500000] nf_conntrack_snmp: Unknown symbol nf_conntrack_broadcast_help (err 0)
[   44.664000] nf_nat_snmp_basic: Unknown symbol nf_nat_snmp_hook (err 0)

Signed-off-by: Peter Wagner <tripolar@gmx.at>

SVN-Revision: 32434
2012-06-18 23:30:48 +00:00
Jo-Philipp Wich 3cf347124a kernel: split kmod-pppoe into kmod-pppox and kmod-pppoe, make kmod-pptp depend on kmod-pppox (#11677)
SVN-Revision: 32433
2012-06-18 23:26:36 +00:00
Jo-Philipp Wich d65c855203 6rd: apply the same simplifications done in 6to4 and 6in4
SVN-Revision: 32432
2012-06-18 23:08:20 +00:00
Jo-Philipp Wich fdfffd0fbe Add new package for configuring 6rd tunnels.
This patch adds support for manually configuring 6rd tunnels. It depends on
the netifd patches I sent earlier, which add 6rd support.

A basic interface configuration looks like:

    config interface 'wan6'
      option proto '6rd'
      option peeraddr '192.0.2.1'
      option ip6prefix '2123::'
      option ip6prefixlen '16'
      option ip4prefixlen '0'

Where ip4prefixlen is optional and actually defaults to 0, which would use all
bits of the IPv4 in the calculated IPv6 subnet.

I believe it should be possible to configure a regular 6to4 tunnel using this,
and that we may want to merge the two eventually, but there are some larger

differences between the two at the moment:

 - 6rd addresses can be more difficult to calculate. My ISP, for example, has
   a setup with a v6 mask of 43 bits, and a v4 mask of 19.

 - 6to4 has support for configuring radvd. This is something we want, of
   course, but it seems best to deal with this in a separate patch.

Just creating a new package looked like the quickest way to get this in.

This work is based on the 6in4 package, and work by Stijn Tintel.

Signed-off-by: Stéphan Kochen <stephan@kochen.nl>

SVN-Revision: 32431
2012-06-18 23:08:18 +00:00
Jo-Philipp Wich 985eab3706 netifd: bump again to git head, fix device present state after reconnecting shell protos
SVN-Revision: 32430
2012-06-18 23:01:04 +00:00
Felix Fietkau 575f47b36e netifd: update to latest version again, fixes route6 issues (#11528)
SVN-Revision: 32429
2012-06-18 21:52:28 +00:00