7c6f7b716b
bcm53xx: switch to 3.18
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44852
2015-03-16 22:24:56 +00:00
0a9b7ea932
bcm53xx: support NVRAM prefixes with extra / in devpath
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44755
2015-03-14 16:35:56 +00:00
2b56913734
bcm53xx: fixup early device id 8012
...
Looks like the BCM53012 has a similar problem to the BCM53011.
Signed-off-by: Ian Kent <raven@themaw.net>
SVN-Revision: 44680
2015-03-11 17:32:02 +00:00
4c67f1d464
bcm53xx: fix typo in bcm47xx sprom driver
...
Fix thinko' in the bcm47xx sprom driver.
Signed-off-by: Ian Kent <raven@themaw.net>
SVN-Revision: 44679
2015-03-11 17:10:19 +00:00
c3b9b35155
bcm53xx: fix printing NAND controller revision
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44622
2015-03-07 12:31:42 +00:00
d15ac306fa
kernel: move KERNFS to generic config
...
KERNFS symbol is selected by SYSFS, so place it in generic config.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
f04a268a04
kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
...
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
6617845711
kernel: move MTD_SPLIT_SUPPORT to generic config
...
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
c2cf1abf8f
bcm53xx: switch to IRQ buttons (keys)
...
Now bcma provides IRQ domain we don't have to poll anymore.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44596
2015-03-03 23:15:55 +00:00
a416029d4d
bcm53xx: add one more NVRAM possible size (0x180000)
...
Size 0x160000 was added to support Buffalo WZR-600DHP2, however Netgear
devices (R6250, R8000) require 0x180000.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44497
2015-02-20 07:07:53 +00:00
08b45f73db
bcm53xx: include kmod-brcmfmac in default profile
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44467
2015-02-16 19:51:21 +00:00
44253d311f
bcm53xx: sprom: extract for PCI host
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44464
2015-02-16 16:13:23 +00:00
4c98253648
bcm53xx: sprom: prepare to support other hosttype-s
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44463
2015-02-16 16:10:05 +00:00
b5310e180d
bcm53xx: use bcm47xx_wdt for restarting device
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44408
2015-02-11 14:41:07 +00:00
6bafb2f810
bcm53xx: backport bcm47xx_wdt changes to 3.18 to use this driver in future
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44390
2015-02-11 10:11:00 +00:00
ddcbef5766
kernel: backport bcma patches queued for 3.20
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44385
2015-02-11 10:04:51 +00:00
3ae30df7db
bcm53xx: drop unused (and broken) GPIOLIB patch
...
First of all this patch was broken since adding 3.18 for bcm53xx. It was
modifying ARCH_BRCMSTB instead of ARCH_BCM_5301X.
Secondly we don't need it as ARCH_MULTIPLATFORM selects
ARCH_WANT_OPTIONAL_GPIOLIB for us.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44383
2015-02-11 08:42:34 +00:00
3dbaab6f67
bcm53xx: fix loading SPROM content by bcma init change
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44367
2015-02-09 18:43:05 +00:00
539cd23892
bcm53xx: fix partitions on Netgear R8000
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44219
2015-01-30 07:25:43 +00:00
1d1a1c19bf
bcm53xx: fix booting BCM4709
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44218
2015-01-30 06:58:35 +00:00
ee75859533
bcm53xx: fix Netgear R8000 serial console
...
Thanks raven-auand.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44217
2015-01-30 06:30:44 +00:00
251b42d491
bcm53xx: early support for Netgear R8000
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44186
2015-01-28 21:55:43 +00:00
bba98a3c53
bcm53xx: backport official Buffalo WZR-900DHP patch
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44070
2015-01-21 07:23:31 +00:00
3b701e8023
bcm53xx: backport spi-nor changes to add gd25q128 support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44069
2015-01-21 06:53:15 +00:00
f0d73a4381
bcm53xx: use final (backported) patch fixing serial console
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44059
2015-01-20 08:04:27 +00:00
ea1fe45fae
bcm53xx: backport 3 BCM5301X patches from Hauke repo
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44058
2015-01-20 07:21:30 +00:00
9758327d83
bcm53xx: rename patches modifying DTS files
...
Ths will allow us to use early 3xx numbers for patches designed for
sending mainline.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44057
2015-01-20 06:58:03 +00:00
78b0da393b
bcm53xx: add support/firmware for Asus RT-AC87U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44051
2015-01-19 11:05:22 +00:00
71c8ec020d
bcm53xx: drop hacky patch making bcma init later
...
The only reason this patch was helping was moving bcma init *after*
of_serial init. It was a bit of luck because both drivers use
device_initcall.
It isn't really a correct way to provide early logging.
Now we have earlyprintk support in bcm53xx we can drop this patch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43981
2015-01-16 15:59:29 +00:00
4ae1e883e8
bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43972
2015-01-14 13:41:05 +00:00
f59c84c431
bcm53xx: enable earlyprintk on more devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43965
2015-01-14 07:42:48 +00:00
8e95c2c5be
bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43964
2015-01-14 07:03:42 +00:00
55e766d78d
bcm53xx: refresh configs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43963
2015-01-14 07:03:17 +00:00
d1a28cfbb2
bcm53xx: support flashing CHK and CyberTAN images
...
SVN-Revision: 43800
2014-12-30 17:45:53 +00:00
e7d7f59171
bcm53xx: support WAN connected to switch port 0
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43754
2014-12-20 15:09:01 +00:00
192e945479
bcm53xx: PCIe: add link check again
...
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43748
2014-12-18 16:23:42 +00:00
e21e9c5548
bcm53xx: backport spi-nor changes and update bcm53xxspiflash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43738
2014-12-17 14:53:25 +00:00
dd9ca05249
bcm53xx: sysupgrade support for devices with serial flash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43719
2014-12-15 15:43:46 +00:00
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
3aaee1ba02
bcm53xx: failsafe support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43639
2014-12-11 20:31:07 +00:00
b55199cf41
bcm53xx: support LEDs on Buffalo devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43616
2014-12-11 11:23:26 +00:00
40d94a3ef0
bcm53xx: backport NVRAM driver sent upstream
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43612
2014-12-10 21:50:57 +00:00
ba81966001
bcm53xx: use bcma callback in SPROM driver to fill the SPROM
...
This is required because it has to be called at very precise moment. See
comment in driver for details.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43611
2014-12-10 21:24:11 +00:00
b0b43e1ef9
bcm53xx: use static NVRAM pointer for now
...
This will allow us to sync with code sent for upstream.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43608
2014-12-10 19:56:56 +00:00
960130e99c
bcm53xx: clean up nvram header
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43606
2014-12-10 18:29:26 +00:00
7093580424
bcm53xx: move SPROM driver to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43604
2014-12-10 18:07:01 +00:00
27a91a99d9
bcm53xx: move NVRAM driver to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43603
2014-12-10 18:01:24 +00:00
3fab0d818c
bcm53xx: move NVRAM header to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43602
2014-12-10 17:37:24 +00:00
613bc3ef3f
bcm53xx: bcm_nand: fix compilation
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43584
2014-12-08 18:28:54 +00:00
aed6b26431
bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43580
2014-12-08 17:39:07 +00:00
Rafał Miłecki
John Crispin
Hauke Mehrtens