ffc0ea6c5d
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
...
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.
SVN-Revision: 33540
2012-09-25 12:57:41 +00:00
e2504a977a
ar71xx: add missing backslash to uci-defaults/leds ( closes #12240 )
...
SVN-Revision: 33537
2012-09-25 12:49:43 +00:00
e70ad61e44
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
SVN-Revision: 33535
2012-09-24 18:45:56 +00:00
9a11f882d7
ar71xx: revert DIR-825-B1 wholeflash image support.
...
It should be implemmented in a cleaner way.
This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"
SVN-Revision: 33459
2012-09-18 14:30:57 +00:00
0f254b4b67
dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images).
...
SVN-Revision: 33447
2012-09-17 14:17:12 +00:00
aa2f4d4c8d
ar71xx: add initial support for RB2011UAS-2HnD
...
SVN-Revision: 33349
2012-09-09 14:05:32 +00:00
6ae5ec16e0
ar71xx: add preliminary support for Mikrotik RB2011L
...
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.
[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 33344
2012-09-09 14:05:22 +00:00
c3b7139ab2
dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
...
SVN-Revision: 33326
2012-09-06 18:15:26 +00:00
02cb5f9dcd
ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
...
SVN-Revision: 33308
2012-08-29 10:37:53 +00:00
5fdbb33db4
ar71xx: Buffalo WZR-HP-AG300H LED support
...
An improved LED support for Buffalo WZR-HP-AG300H.
There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.
[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 33294
2012-08-29 10:11:55 +00:00
4079f3163f
ar71xx: sysupgrade for the ALL0315N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33285
2012-08-27 14:55:36 +00:00
abffa4ecfb
ar71xx: rename all0258n.sh to allnet.sh
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33284
2012-08-27 14:55:35 +00:00
1d96b0275c
ar71xx: detect ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33282
2012-08-27 14:55:32 +00:00
8744f8d183
ar71xx: TEW-712BR user space support
...
SVN-Revision: 33232
2012-08-22 20:12:24 +00:00
5a694e09c8
ar71xx: add ALL0305 board alias
...
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33224
2012-08-22 12:33:22 +00:00
0517183b9c
ar71xx: add support for TP-Link TL-WDR3600
...
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 33219
2012-08-22 09:43:18 +00:00
182a18a369
ar71xx: setup WLAN LED for the TL-WA901ND v2
...
Closes #11889 .
SVN-Revision: 33202
2012-08-16 07:11:30 +00:00
5fc4b7f5fd
ar71xx: uci-defaults/leds for ALL0258N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33165
2012-08-13 14:01:38 +00:00
563400ef10
ar71xx: ew-dorin: added router firmware generation
...
[juhosg: remove dead code]
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
SVN-Revision: 32934
2012-08-01 12:24:57 +00:00
1af4fd7660
ar71xx: Buffalo WLAE-AG300N wireless led patch
...
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32932
2012-08-01 12:24:54 +00:00
010aec0619
ar71xx: Buffalo WLAE-AG300N initial support
...
The patch set for Buffalo WLAE-AG300N initial support.
There is another patch for wireless led support that
is posted separately.
Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.
[juhosg: fix coding style]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32931
2012-08-01 12:24:52 +00:00
7daf851adf
ar71xx: fix PB44 board detection
...
SVN-Revision: 32737
2012-07-15 17:52:50 +00:00
33220828dc
ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0
...
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:
TL-WDR4300:
00000040 43 00 00 01 00 00 00 01 00 00 00 00 76 fb 83 40 |C...........v..@|
TL-WDR4310:
00000040 43 10 00 01 00 00 00 01 00 00 00 00 38 2b 50 6c |C...........8+Pl|
[juhosg: change commit message, use a different model name]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
SVN-Revision: 32683
2012-07-12 13:38:40 +00:00
b020a7e7c3
ar71xx: OM2P LC sysupgrade patch
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
SVN-Revision: 32635
2012-07-06 11:11:58 +00:00
b2f0476871
ar71xx: OM2P sysupgrade support
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
SVN-Revision: 32613
2012-07-05 08:26:57 +00:00
797944d3f1
ar71xx: add support for the OpenMesh OM2P-LC board
...
Patch-by: Marek Linder <marek@open-mesh.com>
SVN-Revision: 32611
2012-07-05 08:26:53 +00:00
b219848bfc
ar71xx: AP136 user-space support
...
SVN-Revision: 32608
2012-07-05 08:26:50 +00:00
2d97a52045
ar71xx: add user space support for the TL-WDR4300
...
SVN-Revision: 32460
2012-06-19 11:51:18 +00:00
27fea0b6d7
ar71xx: correctly detect NETGEAR WNDRMAC
...
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
SVN-Revision: 32453
2012-06-19 10:13:38 +00:00
26cf21df02
ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
...
SVN-Revision: 32447
2012-06-19 00:22:04 +00:00
7f00e5ffc6
uboot-envtools: update to 2012.04.01
...
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
cd7ab1d30b
ar71xx: add default LED setup for the DB120 board
...
SVN-Revision: 31997
2012-05-29 16:39:23 +00:00
4e40bdc190
ar71xx: use the generic uci-default functions for initial LED setup
...
SVN-Revision: 31992
2012-05-29 16:39:17 +00:00
758f670376
ar71xx: add support for TP-Link TL-MR3040
...
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 31845
2012-05-23 21:05:24 +00:00
ab897ab04e
ar71xx: add support for the TP-Link TL-WR1041N v2 board
...
Patch-by: Vince Huang <axishero@foxmail.com>
SVN-Revision: 31608
2012-05-05 17:02:35 +00:00
59b0c1b2b9
ar71xx: TL-WR741NDv4: add WLAN LED config
...
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 31461
2012-04-24 11:38:44 +00:00
e295a077ce
ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
...
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.
To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router
Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]
SVN-Revision: 31208
2012-04-06 06:45:07 +00:00
fe6d66afe2
ar71xx: add rb750 to diag.sh
...
Support status led in diag.sh for RB750
Patch from: Evangelos Arkalis <arkalis.e@gmail.com>
SVN-Revision: 31207
2012-04-06 06:45:04 +00:00
e6b685650b
ar71xx: use modules for LED triggers
...
SVN-Revision: 31107
2012-03-27 19:37:59 +00:00
8a2e4b49de
ar71xx: add initial support for RB750GL
...
SVN-Revision: 31025
2012-03-19 15:57:04 +00:00
6ac12fbb3c
ar71xx: use AR8327 on the DB120 board
...
SVN-Revision: 31012
2012-03-18 22:06:58 +00:00
6036151187
ar71xx: add support for the jjPlus JA76PF2 board
...
SVN-Revision: 30957
2012-03-16 18:00:34 +00:00
a680662391
ar71xx: change LED name prefix on the jjplus boards
...
SVN-Revision: 30956
2012-03-16 18:00:26 +00:00
c918810414
ar71xx: switch to kmod-gpio-button-hotplug
...
SVN-Revision: 30660
2012-02-20 10:51:48 +00:00
1c57a22aae
ar71xx: add model detection for TL-WR842N/ND
...
SVN-Revision: 30507
2012-02-13 17:11:57 +00:00
61f48beadd
ar71xx: fix db120 board detection
...
SVN-Revision: 30408
2012-02-10 11:46:31 +00:00
48e85cd47b
ar71xx: add support for the TRENDNet TEW-673GRU board
...
SVN-Revision: 30376
2012-02-08 16:26:25 +00:00
41bd6bd282
ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards
...
SVN-Revision: 29978
2012-01-31 20:49:34 +00:00
dd47afc197
ar71xx: fix ethernet LEDs on the DIR-600-A1 board
...
SVN-Revision: 29975
2012-01-31 18:37:24 +00:00
8200f0c61a
ar71xx: unify LED names on D-Link boards
...
SVN-Revision: 29974
2012-01-31 18:37:15 +00:00
faeca86e50
ar71xx: support for D-LINK DIR-615 rev. E4
...
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.
It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.
[juhosg: add 3.2 support]
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
SVN-Revision: 29973
2012-01-31 18:37:09 +00:00
97e4ddd012
ar71xx: add support for TP-Link TL-MR11U
...
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.
Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade
[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]
Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>
SVN-Revision: 29972
2012-01-31 18:37:01 +00:00
eeb00634a7
add support for the Atheros AP113 reference board
...
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch
SVN-Revision: 29935
2012-01-28 13:19:49 +00:00
e1e84badaa
ar71xx: add support for Compex WPE72/WPE72NX
...
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.
[juhosg: add support to 3.2 as well]
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 29912
2012-01-26 17:01:41 +00:00
038d4e0d77
ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour
...
This patch fixes the board detection of the TL-MR3020.
The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.
The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.
[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
SVN-Revision: 29905
2012-01-25 07:44:45 +00:00
23e1b451dc
ar71xx: preset WLAN LED config on MZK-W300NH
...
SVN-Revision: 29896
2012-01-24 18:40:36 +00:00
a1dcbc66a6
ar71xx: add initial support for the TL-WR2543N/ND board
...
The WLAN LEDs are not working yet.
SVN-Revision: 29680
2012-01-07 19:36:35 +00:00
f638c6207b
ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards
...
SVN-Revision: 29672
2012-01-06 15:54:59 +00:00
1e848b17ad
ar71xx: add support for Redwave RW2458N
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 29669
2012-01-06 07:20:59 +00:00
84cd8a5ee0
ar71xx: fix RB-750 network configuration
...
SVN-Revision: 29668
2012-01-06 07:20:54 +00:00
232eb83f74
ar71xx: fix LED configuration on the RB-750
...
SVN-Revision: 29666
2012-01-05 18:08:28 +00:00
b8f0d86115
ar71xx: add inital support for the ALFA Network AP96 board
...
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.
SVN-Revision: 29662
2012-01-04 21:13:54 +00:00
2f53f82203
ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
...
These models are based on the AP99 reference board,
and uses the AR7241 SoC.
SVN-Revision: 29658
2012-01-04 17:30:57 +00:00
301b1b4f92
ar71xx: show correct model name on TL-WA701N/ND boards
...
SVN-Revision: 29657
2012-01-04 17:30:55 +00:00
72019009c7
ar71xx: fix network configuration for the TL-WA901N/ND boards
...
SVN-Revision: 29654
2012-01-04 17:30:52 +00:00
90bfef9ec9
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
...
SVN-Revision: 29653
2012-01-04 17:30:50 +00:00
5eb502d9c1
ar71xx: add default LED configuration for the TL-MR3020
...
Also use the system LED for diagnostic.
SVN-Revision: 29652
2012-01-04 17:30:49 +00:00
1045c83527
ar71xx: add support for TP-Link TL-MR3020
...
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.
I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
USB is working and has been tested with USB mass storage and USB UMTS
stick.
Wifi also seems to work.
Ethernet is working too.
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
SVN-Revision: 29651
2012-01-04 17:30:47 +00:00
1e68f10b87
ar71xx: add support for the ALFA Network N2/N5 boards
...
SVN-Revision: 29635
2012-01-01 19:30:25 +00:00
5c067db8a7
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
...
SVN-Revision: 29631
2011-12-31 15:02:46 +00:00
557009bbdb
ar71xx: fix LEDs on the WRT400N
...
SVN-Revision: 29624
2011-12-31 13:54:11 +00:00
76dacee995
ar71xx: enable sysupgrade support for airrouter
...
Works for me! ;-)
Patch-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 29614
2011-12-27 16:59:43 +00:00
c6ee919b2a
ar71xx: fix sysupgrade on PB42/PB44 boards
...
SVN-Revision: 29613
2011-12-27 16:57:01 +00:00
8799627ef0
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
...
Thanks netprince for reporting and testing.
SVN-Revision: 29595
2011-12-21 19:32:40 +00:00
0cc056cb7e
ar71xx: add support for the wzr-hp-g300nh2
...
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
SVN-Revision: 29567
2011-12-18 22:20:17 +00:00
67c7980290
ar71xx: connect GMAC0 to the internal switch on DB120
...
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
SVN-Revision: 29557
2011-12-15 22:25:38 +00:00
b9c5cb5c9a
ar71xx: add support for ALFA Network's Hornet-UB board
...
SVN-Revision: 29535
2011-12-14 20:54:10 +00:00
058998acdb
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
...
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 29513
2011-12-13 14:59:40 +00:00
8eb8a6e1e7
ar71xx: fix WNDR3x00 model detection
...
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.
r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.
I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 29472
2011-12-07 06:55:39 +00:00
f7a482d382
ar71xx: add TP-Link board detection
...
SVN-Revision: 29459
2011-12-05 21:11:01 +00:00
c6bcf8d1d8
ar71xx: verify hardware id of firmware images on TP-Link boards
...
SVN-Revision: 29455
2011-12-05 18:11:51 +00:00
1f809532de
ar71xx: add preliminary support for wzr-hp-g450h
...
SVN-Revision: 29441
2011-12-05 14:20:51 +00:00
4cc2b9bb06
ar71xx: rewrite WNDR3700/3800 handling
...
SVN-Revision: 29434
2011-12-05 13:03:54 +00:00
78699c2e51
add some missing wndr3800 base-files definitions
...
SVN-Revision: 29433
2011-12-05 12:56:21 +00:00
5177814ade
ar71xx: change user-space board detection
...
SVN-Revision: 29432
2011-12-05 12:56:20 +00:00
f188f1bad5
ar71xx: add support for Ubiquiti AirRouter
...
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>
SVN-Revision: 29395
2011-12-01 22:49:02 +00:00
0612667c34
ar71xx: configure default led behavior for the OM2P
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
SVN-Revision: 29394
2011-12-01 22:48:59 +00:00
39348e387f
ar71xx: use /lib/functions/uci-defaults.sh
...
SVN-Revision: 29385
2011-12-01 22:48:47 +00:00
c20d7378e5
ar71xx: fix wndr3800 machine name
...
This fixes the machine name in /proc/cpuinfo and luci status page machine name.
Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>
SVN-Revision: 29326
2011-11-24 20:09:38 +00:00
d461fdd519
ar71xx: add diag support for the DB120 board
...
SVN-Revision: 28975
2011-11-12 10:54:10 +00:00
8687fc3e41
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
...
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28971
2011-11-12 10:54:04 +00:00
87704b8078
ar71xx: create TL-WA901ND network config from uci-defaults
...
SVN-Revision: 28833
2011-11-07 21:44:24 +00:00
09fdfa444f
ar71xx: create ALL0258N network config from uci-defaults
...
SVN-Revision: 28832
2011-11-07 21:44:23 +00:00
63348f5fed
ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults
...
SVN-Revision: 28831
2011-11-07 21:44:20 +00:00
c3692c8331
ar71xx: create WZR-HP-G300NH network config from uci-defaults
...
SVN-Revision: 28830
2011-11-07 21:44:17 +00:00
ee1a07a11d
ar71xx: create RB-493G network config from uci-defaults
...
SVN-Revision: 28829
2011-11-07 21:44:12 +00:00
d82d063d81
ar71xx: create TL-WR1043ND network config from uci-defaults
...
SVN-Revision: 28828
2011-11-07 21:44:11 +00:00
68be590894
ar71xx: create WRT160NL network config from uci-defaults
...
SVN-Revision: 28827
2011-11-07 21:44:09 +00:00
83901e47c9
ar71xx: create PB92 network config from uci-defaults
...
SVN-Revision: 28826
2011-11-07 21:44:08 +00:00
22ab9fc9ad
ar71xx: create DIR-825-B1 network config from uci-defaults
...
SVN-Revision: 28825
2011-11-07 21:44:07 +00:00
e866ba5753
ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults
...
SVN-Revision: 28824
2011-11-07 21:44:03 +00:00
9298c7afe5
ar71xx: create RB-450 network config from uci-defaults
...
SVN-Revision: 28823
2011-11-07 21:44:02 +00:00
ac256f97bd
ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults
...
SVN-Revision: 28822
2011-11-07 21:44:01 +00:00
944ac3f6cf
ar71xx: create RB-433{,U} network config from uci defaults
...
SVN-Revision: 28821
2011-11-07 21:43:58 +00:00
6e8390ae6c
ar71xx: create even more network configs from the uci-defaults script
...
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.
SVN-Revision: 28820
2011-11-07 21:43:56 +00:00
b62560413a
ar71xx: create more network configs from the uci-defaults script
...
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.
SVN-Revision: 28819
2011-11-07 21:43:54 +00:00
6c92b26bac
ar71xx: create a bunch of network configs from the uci-defaults script
...
Create the default network configuration dynamically for the boards with
a single ethernet interface.
SVN-Revision: 28818
2011-11-07 21:43:52 +00:00
0a8e5dbf7b
ar71xx: create generic network config from an uci-defaults script
...
SVN-Revision: 28817
2011-11-07 21:43:51 +00:00
54c034ae7a
ar71xx: remove AP81 defconfig, it is the same as the generic config
...
SVN-Revision: 28816
2011-11-07 21:34:33 +00:00
eb9ef60e2d
ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards
...
SVN-Revision: 28812
2011-11-07 20:25:00 +00:00
8456840d82
ar71xx: wrap long lines in the upgrade script
...
SVN-Revision: 28811
2011-11-07 20:24:59 +00:00
b27254a2c5
ar71xx: add default network configuration for the WHR-HP-GN
...
SVN-Revision: 28807
2011-11-07 13:32:43 +00:00
a801d620a7
ar71xx: add support for the Buffalo WHR-HP-GN board
...
SVN-Revision: 28805
2011-11-07 12:59:10 +00:00
4509af17ed
ar71xx: add support for the Buffalo WHR-G301N board
...
SVN-Revision: 28803
2011-11-07 12:59:07 +00:00
91f08d47c2
ar71xx: add initial support for the TL-WR741ND v4 board
...
The ethernet port LEDs are not working yet.
SVN-Revision: 28706
2011-11-01 11:20:52 +00:00
43e2e2e4ef
ar71xx: combine LEDs setup in one file
...
SVN-Revision: 28704
2011-11-01 11:20:49 +00:00
f372620ffa
ar71xx: unify LED names on Planex boards
...
SVN-Revision: 28703
2011-11-01 11:20:47 +00:00
66ab406d5a
ar71xx: unify LED names on Buffalo boards
...
SVN-Revision: 28702
2011-11-01 11:20:46 +00:00
e7586959df
ar71xx: unify LED names on TP-Link boards
...
SVN-Revision: 28701
2011-11-01 11:20:44 +00:00
3a7b12a27d
ar71xx/all0258n: sysupgrade support
...
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28700
2011-11-01 09:23:32 +00:00
f40557a692
ar71xx/all0258n: add default config
...
This adds default network and uboot-env settings for the ALL0258N.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28699
2011-11-01 09:23:31 +00:00
06d9653b36
ar71xx: remove default network config of the mzk-w04nu board as well
...
It works with the generic config.
SVN-Revision: 28695
2011-11-01 09:23:25 +00:00
693c777eaf
ar71xx: remove LED setup of nonexistent interfaces on RB750
...
SVN-Revision: 28693
2011-10-31 14:26:56 +00:00
2bcd612e72
ar71xx: remove default network config of the wnr2000 board
...
It is the same as the generic configuration.
SVN-Revision: 28692
2011-10-31 14:26:51 +00:00
39b3bfcf6a
ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value
...
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28678
2011-10-30 13:06:30 +00:00
1646346798
ar71xx: add initial support for the OpenMesh OM2P board
...
Based on a patch by Marek Lindner <marek@open-mesh.com>
SVN-Revision: 28617
2011-10-27 07:54:51 +00:00
9d51cda2db
ar71xx: Buffalo WHR-HP-G300N kernel support
...
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.
Known problem: iw phy phy0 info shows:
Coverage class: 0 (up to 0m)
Available Antennas: TX 0 RX 0
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 28567
2011-10-24 21:49:26 +00:00
d96e321bd1
ar71xx: add kernel support for the Allnet ALL0258N board
...
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28564
2011-10-24 21:49:21 +00:00
b61de9c865
base-files: make sure inittab-console-fixup returns with success ( #10275 )
...
SVN-Revision: 28562
2011-10-24 21:35:43 +00:00
a136b67604
linux: ar71xx: add support for Mikrotik Routerboard RB493G
...
SVN-Revision: 28423
2011-10-11 23:05:16 +00:00
e45d7d7006
ar71xx: enable login only on the system console by default
...
SVN-Revision: 28294
2011-09-23 19:56:38 +00:00
733399600f
ar71xx: add support for the TP-Link TL-WR703N v1 board
...
Based on a patch by dongyuqi <729650915@qq.com>
SVN-Revision: 28277
2011-09-21 11:47:53 +00:00
85b858fae6
ar71xx: enable sysupgrade on the AP96 and DB120 boards
...
SVN-Revision: 27901
2011-08-04 19:41:18 +00:00
fb77134596
ar71xx: use the same test for AP121 and Zcomax sysupgrade images
...
SVN-Revision: 27900
2011-08-04 19:41:17 +00:00
e18ceb1dac
ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
...
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.
SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
7afed2d86c
ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650 )
...
SVN-Revision: 27434
2011-07-04 03:03:34 +00:00
701543d3ef
revert r27043 ( #9513 )
...
SVN-Revision: 27343
2011-07-01 19:52:57 +00:00
1edef5ec98
revert r27341, it introduce wrong behaviour for other models
...
SVN-Revision: 27342
2011-07-01 19:15:45 +00:00
3b3103b2f1
turn status LED off if device finished initializing
...
SVN-Revision: 27341
2011-07-01 18:39:53 +00:00
cc56af716c
ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607 )
...
SVN-Revision: 27283
2011-06-25 13:54:42 +00:00
70106f153d
Remove trailing spaces, convert spaces to tabs
...
SVN-Revision: 27153
2011-06-09 19:30:50 +00:00
9160e06af5
ar71xx: override inittab to enable login on ttyATH0
...
SVN-Revision: 27128
2011-06-07 17:07:10 +00:00
9e435c03e0
ar71xx: add sysupgrade support for the AP121 boards
...
SVN-Revision: 27069
2011-05-31 22:53:45 +00:00
646937135f
ar71xx: add default network config for the AP121 boards
...
SVN-Revision: 27068
2011-05-31 22:53:44 +00:00
650c7cc2fd
ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
...
SVN-Revision: 27043
2011-05-31 22:53:13 +00:00
4834fdaccd
ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
...
SVN-Revision: 27042
2011-05-31 22:53:12 +00:00
b39eebdf1e
ar71xx: add uci config for the WLAN LED on the WRT160NL
...
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
SVN-Revision: 26861
2011-05-08 21:38:49 +00:00
858e2e719b
ar71xx: use phy0tpt trigger for the WLAN LEDs
...
SVN-Revision: 26860
2011-05-08 21:38:48 +00:00
cbc75a9c70
ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
...
SVN-Revision: 26779
2011-04-28 21:27:42 +00:00
f13581eedb
linux/ar71xx: update wget2nand script
...
SVN-Revision: 26747
2011-04-21 12:38:25 +00:00
e193547733
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
...
SVN-Revision: 26603
2011-04-12 09:29:21 +00:00
54ede24829
ar71xx: Add support for WZR-HP-G301NH
...
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.
While we are at it, also rename the profile to reflect that it now is for
more than one device.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26601
2011-04-12 09:29:10 +00:00
784d808d07
ar71xx: add default configuration for the switch on AP96
...
Enables forwarding of frames between the switch ports (eth0).
Patch by Jouni Malinen
SVN-Revision: 26180
2011-03-15 19:51:42 +00:00
8eb616de82
ar71xx: add support for the TP-Link TL-WA901ND v2 board
...
Patch-by: Jonathan Benett <jbscience87@gmail.com>
SVN-Revision: 26119
2011-03-13 15:08:31 +00:00
67c3e0bf7e
ar71xx: add support for the WNDR3700v2 board
...
Based on a patch by Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25118
2011-01-26 20:35:42 +00:00
061228d73c
ar71xx: make uci-default scripts executable
...
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
SVN-Revision: 24897
2011-01-04 13:44:01 +00:00
2c0596cd69
unifi: add sysupgrade and leds support
...
SVN-Revision: 24737
2010-12-20 17:28:34 +00:00
e7ea6387a3
ar71xx: use usbdev trigger for USB LEDs by default
...
SVN-Revision: 24648
2010-12-17 17:10:16 +00:00
a26c3e60e2
ar71xx: populate LED configuration for WZR-HP-G300NH
...
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>
[nand-disk trigger has been removed - juhosg]
SVN-Revision: 24642
2010-12-17 17:09:57 +00:00
a2a5598c00
ar71xx: add wlan led for the TL-WR941ND
...
SVN-Revision: 24612
2010-12-15 19:55:50 +00:00
9f38f9bf76
ar71xx: add missing files for the JA76PF board
...
SVN-Revision: 24444
2010-12-10 19:55:28 +00:00
b680f088ba
ar71xx: add support for the jjPlus JA79PF
...
Patch-by: Cezary Jackiewicz
SVN-Revision: 24440
2010-12-10 17:57:51 +00:00
5b0c83edd9
ar71xx: add support for the TP-LINK TL-MR3220 v1 board
...
SVN-Revision: 24439
2010-12-10 17:57:48 +00:00
83834da33b
ar71xx: add default network configuration file for the TL-MR3420
...
SVN-Revision: 24437
2010-12-10 17:57:40 +00:00
081796fe47
ar71xx: add nbg460n image generation
...
This adds image generation for NBG460N/550N/550NH boards.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
SVN-Revision: 24419
2010-12-10 15:17:03 +00:00
6f7e2d4ce8
tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups
...
SVN-Revision: 24215
2010-12-02 20:19:55 +00:00
5f3f1b8cd8
ar71xx: Configure WNDR3700 switch LED colors properly ( #8103 )
...
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 23879
2010-11-04 18:55:16 +00:00
b3b2227869
Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )" on submitter's request
...
SVN-Revision: 23878
2010-11-04 18:53:18 +00:00
77eee74d56
ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )
...
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 23877
2010-11-04 18:48:22 +00:00
fc035b3cb6
ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
...
SVN-Revision: 23439
2010-10-14 13:41:42 +00:00
3941621dbc
ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well ( fixes #7563 )
...
SVN-Revision: 23432
2010-10-14 00:14:59 +00:00
697f5d0bdd
ar71xx: initial support for jjPlus JWAP003
...
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)
SVN-Revision: 23165
2010-10-01 07:09:29 +00:00
32d12d5e5c
ar71xx: add support for the TL-MR3420 v1 board
...
SVN-Revision: 23136
2010-09-27 14:53:59 +00:00
a7bb7dd99e
Add support for Atheros AP96 reference board
...
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.
mach-ap96.c is based on mach-wndr3700.c.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
SVN-Revision: 23125
2010-09-27 08:59:53 +00:00
b4336a8e2d
ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
...
SVN-Revision: 22882
2010-09-03 18:14:37 +00:00
523fcf0497
ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563
...
SVN-Revision: 22675
2010-08-16 19:21:57 +00:00
e35f7ef51d
ar71xx: add eap7660d board to diag.sh and sysupgrade
...
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
SVN-Revision: 22644
2010-08-14 21:07:31 +00:00
9aef272f4a
linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)
...
SVN-Revision: 22631
2010-08-14 07:48:05 +00:00
6616951c15
add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch
...
SVN-Revision: 22625
2010-08-13 19:29:51 +00:00
4ee3ae96c2
ar71xx: fix sysupgrade on the ubnt nanostation m
...
SVN-Revision: 22370
2010-07-23 18:16:47 +00:00
900aaa919b
ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528 , without the ethernet fifo cfg values)
...
SVN-Revision: 22353
2010-07-22 12:37:44 +00:00
d6d8014cfd
fix dir-825-b1 default network config after r21905
...
SVN-Revision: 22005
2010-07-01 00:03:43 +00:00
e827a12c48
ar71xx: don't use vlan 0 for devices with rtl8366s switch
...
SVN-Revision: 21905
2010-06-26 19:15:32 +00:00
7bff9c0101
ar71xx: add support for the Senao EAP7660D board
...
This patch adds support for the Senao EAP7660D board to trunk.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
SVN-Revision: 21837
2010-06-18 16:22:05 +00:00
518f43efd8
ar71xx: fix RB750 LED configuration
...
Patch-by: Ray Bellis
SVN-Revision: 21826
2010-06-17 09:24:26 +00:00
b86e4e1c6a
ar71xx: add default network config for the RB433UAH board
...
SVN-Revision: 21765
2010-06-12 13:20:41 +00:00
3045632eb0
ar71xx: add default network configuration file for the RB450/RB433 boards
...
SVN-Revision: 21730
2010-06-08 20:19:23 +00:00
6bccc41f6c
ar71xx: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced
...
SVN-Revision: 21634
2010-05-30 03:20:49 +00:00
65dba323f7
ar71xx: Make wget2nand fail if copying the kernel fails and use the correct file extension for the rootfs image
...
wget2nand didnt check the exit status after copying the kernel, if the
copying failed for some reason ( for example not enougs space on the
kernel partition) it simply continued extracting the rootfs.
I also changed the filename, which wget2nand trys to download (
.tar.gz instead of .tgz ).
Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com>
SVN-Revision: 21444
2010-05-14 08:38:39 +00:00
d6c0363884
ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
...
Cc: backfire@openwrt.org
SVN-Revision: 20752
2010-04-09 08:40:09 +00:00
23bebe33a7
Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.
...
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.
SVN-Revision: 20722
2010-04-05 23:03:16 +00:00
8701291f0f
ar71xx: add uci defaults to fix trx header on the WRT160NL boards
...
* patch by Otto Solares
SVN-Revision: 20526
2010-03-27 17:38:40 +00:00
35bb7be34d
ar71xx: Add basic WLAN LED control to TL-WR1043ND
...
* thanks to KillaB
* closes #6834
SVN-Revision: 20415
2010-03-25 07:31:17 +00:00
0095ab73f3
ar71xx: fix defconfig script to work with ImageBuilder
...
* patch from #5722
SVN-Revision: 20231
2010-03-15 13:29:16 +00:00
ed3aca86a6
ar71xx: don't break the existing network configuration in the wget2nand script
...
SVN-Revision: 20228
2010-03-15 11:03:33 +00:00
9daf566ddc
ar71xx: fix sysupgrade on the LS-SR71 board
...
SVN-Revision: 20119
2010-03-10 17:41:45 +00:00
eaccbd3fb8
ar71xx: add default network configuration for the PB44 board
...
SVN-Revision: 20099
2010-03-09 18:05:58 +00:00
18ee1b6dda
ar71xx: add uci-defaults for the RB750 board
...
SVN-Revision: 20097
2010-03-09 18:05:51 +00:00
b21308313e
ar71xx: override lan port names on the RB750
...
SVN-Revision: 20096
2010-03-09 18:05:48 +00:00
781c482e6a
ar71xx: improve wget2nand script
...
SVN-Revision: 20094
2010-03-09 18:05:42 +00:00
4d5a9fe402
ar71xx: add missing protocol definitions to default network configurations
...
SVN-Revision: 20091
2010-03-09 18:05:31 +00:00
5e8c8818ed
ar71xx: add preliminary support for the RouterBOARD 750
...
SVN-Revision: 20029
2010-03-07 05:41:01 +00:00
52f03512dc
ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)
...
* closes #6782
SVN-Revision: 20006
2010-03-05 20:29:27 +00:00
7bda582cf7
ar71xx: fix status led detection on the RB4xx boards
...
SVN-Revision: 20005
2010-03-05 20:29:24 +00:00
e1bb4af48b
ar71xx: add default network configuration file for the TL-WR741ND board
...
SVN-Revision: 19930
2010-03-01 07:34:48 +00:00
3f7d3dc939
ar71xx: add default network configuration file for the DIR-600 rev. A1 board
...
SVN-Revision: 19929
2010-03-01 07:34:46 +00:00
a6be62a4f1
ar71xx: add default network configuration file for the TL-WR1043ND board
...
Thanks to Andrew Tarabaras.
SVN-Revision: 19840
2010-02-24 13:39:20 +00:00
187d5546db
ar71xx: use the correct name for the status LED on the WRT400 board (thanks to chuljin, patch from #6734 )
...
SVN-Revision: 19831
2010-02-24 13:38:37 +00:00
560f7173b2
ar71xx: update default network configuration file for the WNDR3700
...
Signed-off-by: Scott Dudley <spmsink@hotmail.com>
SVN-Revision: 19830
2010-02-24 13:38:31 +00:00
47990f61fb
ar71xx: add uci configuration for the WAN LED on the WNDR3700
...
Based on a patch by Scott Dudley <spmsink@hotmail.com>
SVN-Revision: 19746
2010-02-19 11:52:25 +00:00
0e84ed29ea
preinit: fix mixup between led and reset button enable on some platforms (thx, cshore)
...
SVN-Revision: 19370
2010-01-28 19:28:02 +00:00
56bc02a305
add preinit modularization work by Daniel Dickinson (cshore)
...
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
2b5ba9073f
rtl8366_smi: move RTL8366S driver into a separate file
...
SVN-Revision: 19279
2010-01-22 17:38:07 +00:00
b9328f2e04
ar71xx: change failsafe message
...
SVN-Revision: 19221
2010-01-18 09:15:35 +00:00
a9c5e3159f
ar71xx: update default network configuration for the WNDR3700/DIR-825-B1
...
Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.
SVN-Revision: 19217
2010-01-18 09:01:47 +00:00
a86a28841c
ar71xx: add some default configs for rtl8366 based devices
...
SVN-Revision: 19210
2010-01-18 00:44:52 +00:00
3cc98b09f7
adjust switch default configs for the swconfig api change
...
SVN-Revision: 19209
2010-01-18 00:38:08 +00:00
21a235bc67
ar71xx: fix typos in the ar71xx.sh
...
SVN-Revision: 19151
2010-01-15 12:11:05 +00:00
cb80426641
ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH
...
SVN-Revision: 19150
2010-01-15 12:08:03 +00:00
58301cdeb8
ar71xx: add support for the D-Link DIR-600 rev. A1 board
...
SVN-Revision: 19100
2010-01-11 08:02:10 +00:00
ac4b63a18b
ar71xx: create firmware images for the AP81/PB42/PB44 boards
...
SVN-Revision: 19011
2010-01-02 16:30:52 +00:00
cace9f4566
ar71xx: add support for the TL-WR841N v1.5 board
...
SVN-Revision: 18893
2009-12-22 19:31:28 +00:00
1f114b0dbd
ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the patch from #6186 )
...
SVN-Revision: 18818
2009-12-18 12:57:01 +00:00
8bc4e3ea14
ar71xx: enable diagnostic LED on the Routerstation Pro
...
SVN-Revision: 18782
2009-12-15 08:35:11 +00:00
e0042b55ea
fix default network config after r18699
...
SVN-Revision: 18708
2009-12-08 22:22:16 +00:00
ddc2e2270b
ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection ( #6309 )
...
SVN-Revision: 18699
2009-12-08 14:06:18 +00:00
7d8a1bf239
ar71xx: TL-WR1043ND support cleanup
...
SVN-Revision: 18697
2009-12-08 12:46:30 +00:00
f065bbdf7f
ar71xx: DIR-825 support cleanup
...
SVN-Revision: 18622
2009-12-03 15:07:41 +00:00
e4d21e0399
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater)
...
SVN-Revision: 18621
2009-12-03 15:07:34 +00:00
bd4bec689d
ar71xx: create sysupgrade image for the WNDR3700
...
SVN-Revision: 18570
2009-11-28 08:25:56 +00:00
ac8369a672
ar71xx: fix a typo in ar71xx.sh
...
SVN-Revision: 18568
2009-11-28 08:25:49 +00:00
536a4ce5b9
ar71xx: add default network configuration file for the WNDR3700
...
SVN-Revision: 18566
2009-11-27 21:21:24 +00:00
4704478682
ar71xx: add sysupgrade support for Ubiquiti XM boards
...
SVN-Revision: 18533
2009-11-25 09:51:31 +00:00
bc97b5de8b
ar71xx: enable failsafe on the Nanostation M/Rocket M
...
SVN-Revision: 18532
2009-11-25 09:51:28 +00:00
523aba9ff9
ar71xx: create combined images for the RS, RS-PRO and LS-SR71 boards, and add sysupgrade support for them
...
SVN-Revision: 18531
2009-11-25 09:51:25 +00:00
a12a03de8d
ar71xx: register LEDs and buttons on the WNDR3700
...
Thanks to aorlinks (https://forum.openwrt.org/viewtopic.php?pid=97415#p97415 )
SVN-Revision: 18435
2009-11-16 17:31:25 +00:00
5ab66428b0
ar71xx: add preliminary support for the Netgear WNDR3700
...
Based on patches by Marco Porsch from:
https://forum.openwrt.org/viewtopic.php?id=22311
SVN-Revision: 18411
2009-11-13 17:11:29 +00:00
28e212cc40
ar71xx: add default network configuration for RS and RS-Pro
...
SVN-Revision: 18103
2009-10-20 19:36:47 +00:00
a525c056d5
ar71xx: add default network configuration file for the WP543 board
...
SVN-Revision: 18101
2009-10-20 12:59:45 +00:00
abffbb5da7
add a defconfig for wrt160nl which contains switch settings
...
SVN-Revision: 17826
2009-10-02 21:07:12 +00:00
4a99a9b7e3
ar71xx: use 'link4' LED for diagnostic on Bullet M
...
SVN-Revision: 17813
2009-10-01 19:41:13 +00:00
dd3b2ae8af
ar71xx: add default network configuration for the Bullet M
...
SVN-Revision: 17810
2009-10-01 19:41:06 +00:00
b6ce09fea4
ar71xx: use WPS led for diagnostic on WRT160NL
...
SVN-Revision: 17518
2009-09-05 18:46:43 +00:00
0b869ee143
preliminary failsafe support ( closes #5726 )
...
SVN-Revision: 17321
2009-08-19 20:16:01 +00:00
39b7814f25
add diag script ( closes #5725 )
...
SVN-Revision: 17320
2009-08-19 19:26:53 +00:00
a59d59be79
enable sysupgrade on the WRT160Nl
...
SVN-Revision: 17202
2009-08-09 14:12:24 +00:00
304fbfa841
init mac address on the WRT160NL board (thanks to Gerry Rozema for testing)
...
SVN-Revision: 17124
2009-08-04 17:45:00 +00:00
bfd20cb57d
init mac address on the TEW-632BRP boards ( closes #5403 )
...
SVN-Revision: 17100
2009-08-03 07:48:21 +00:00
9d1e01a159
fix sysupgrade
...
SVN-Revision: 17092
2009-08-02 09:27:38 +00:00
5f2d2695d9
enable sysupgrade support for the TL-WR741ND
...
SVN-Revision: 16982
2009-07-25 19:50:26 +00:00
227e69c0f4
add experimental sysupgrade support
...
SVN-Revision: 16364
2009-06-06 17:44:49 +00:00
656f86f810
add default network configuration for the AP83 board
...
SVN-Revision: 16360
2009-06-06 16:01:09 +00:00
f3c3e2772f
improve MZK-W300NH support (thanks to Kazuki Shimada for the board)
...
SVN-Revision: 16340
2009-06-04 18:18:36 +00:00
f6e6a733f5
add preliminary support for the WRT160NL
...
SVN-Revision: 16068
2009-05-25 18:36:49 +00:00
7807c1a29f
add experimental support for the Atheros PB44 board
...
SVN-Revision: 15928
2009-05-20 08:23:48 +00:00
aab2d9371b
add experimental support for the Linksys WRT400N board (thanks to netprince)
...
SVN-Revision: 15422
2009-04-26 06:40:02 +00:00
ef537a68da
ap81: register ethernet devices, and add default network configuration file
...
SVN-Revision: 14921
2009-03-17 18:07:16 +00:00
fa36af494f
pb42: fix ethernet, remove USB registration, add default network configuration
...
SVN-Revision: 14876
2009-03-14 18:28:33 +00:00
ceb3b8c837
tew-632brp: add default network configuration
...
SVN-Revision: 14830
2009-03-10 08:14:26 +00:00
dfd746cd47
add default network configuration for the RB-411 board
...
SVN-Revision: 14695
2009-02-28 18:55:46 +00:00
80afab21fc
add default network configuration for the AW-NR580
...
SVN-Revision: 14688
2009-02-27 20:49:51 +00:00
1adf135943
wnr2000: enable ar8216 workaround, add network config. LAN ports now work
...
SVN-Revision: 14663
2009-02-26 05:54:32 +00:00
f88c482dea
defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci
...
SVN-Revision: 14662
2009-02-26 05:54:07 +00:00
8e0e4cb3d8
mzk-w04nu: enable the ar8216 chip workaround, and add a default network configuration file
...
SVN-Revision: 14656
2009-02-25 16:48:56 +00:00
9da4abfe58
add default network configuration for the TL-WR941ND board
...
SVN-Revision: 14654
2009-02-24 18:19:02 +00:00
9be9eb8ab1
add more base-files
...
SVN-Revision: 14653
2009-02-24 18:16:40 +00:00
45a4ac68a8
add wget2nand script
...
SVN-Revision: 12263
2008-08-10 09:20:55 +00:00
Gabor Juhos
Daniel Dickinson
Felix Fietkau
Luka Perkov
Florian Fainelli
Jonas Gorski
Jo-Philipp Wich
Vasilis Tsiligiannis
Alexandros C. Couloumbis
Claudio Mignanti
Andy Boyett