Commit Graph

41 Commits (73ed2369070d6839611fb8675030e4902c6a87ef)

Author SHA1 Message Date
Luka Perkov 4f679c1775 kernel: drop dead pwm code
The files have last been used with 2.6.x kernel.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37810
2013-08-18 01:25:41 +00:00
Luka Perkov a2dccb958c kernel: drop dead glamo code
The code is not used since the s3c24xx target was removed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37809
2013-08-18 01:25:40 +00:00
Jonas Gorski 29954b9ffc kernel: remove gpio_buttons
It hasn't been buildable for a long time, and there are no users of it
anymore left as all of them have been switched to the upstream accepted
version.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37436
2013-07-19 13:20:41 +00:00
Gabor Juhos a1f91282b4 generic: ar8216: allow to specify SGMII config via platform data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36798
2013-05-30 17:38:26 +00:00
Gabor Juhos c170d3c3e4 generic: ar8216: add get_port_link callback
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36797
2013-05-30 17:38:22 +00:00
Jonas Gorski a33dd13c98 kernel: add missing bcma defines and header file for bcrmfmac
Fixes build failure when having kmod-mmc and brcmfmac selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36468
2013-04-28 11:10:42 +00:00
John Crispin fff58a5801 allow loading port maps from OF
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36283
2013-04-09 14:19:09 +00:00
Jonas Gorski bb0118c66f generic: add b53 swconfig switch driver
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35305
2013-01-23 10:12:33 +00:00
Gabor Juhos d4b4c7d102 generic: ar8216: add sgmii_delay_en field to ar8327_platform_data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34881
2012-12-25 18:45:31 +00:00
Gabor Juhos 3931c9524c generic: ar8316: allow to configure port 6 via platform data on AR8327
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34847
2012-12-22 12:12:37 +00:00
Gabor Juhos a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
Gabor Juhos a860153cce generic: disintegrate UAPI from include/linux/switch.h
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34677
2012-12-14 12:11:41 +00:00
Gabor Juhos dfd718d13d mac80211: ath9k: allow to load EEPROM data via firmware API
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34606
2012-12-10 15:46:15 +00:00
Gabor Juhos 6c1fbb2d5c mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
[juhosg: move ramips specific stuff into a followup patch]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34269
2012-11-20 07:19:09 +00:00
Gabor Juhos e8fc46b7c5 generic: allow to disable [25]GHz support in ath9k via platform data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33954
2012-10-27 08:55:36 +00:00
Gabor Juhos 0045449b1b generic: add driver for the the RTL8367R{B,-VB} switches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33839
2012-10-18 07:22:56 +00:00
John Crispin ba6751058b gpiodev/gpioctl RIP
SVN-Revision: 33725
2012-10-11 11:58:09 +00:00
Gabor Juhos 2323120d5e generic add WLAN calibration data ID to routerboot.h
SVN-Revision: 33346
2012-09-09 14:05:26 +00:00
Gabor Juhos f3ecbea052 adm5120: move common routerboot definitions into a separate header file
Those will be used on the ar71xx platform as well.

SVN-Revision: 33341
2012-09-09 11:55:42 +00:00
Gabor Juhos e2782eae8e generic: rtl836x: add hw_reset field to struct rtl8366_smi
It will be used to start/stop the switch if that is
supported by the given board.

SVN-Revision: 32943
2012-08-02 09:54:21 +00:00
Gabor Juhos b934fa2f16 generic: ar8216: allow to configure AR8327 LEDs via platform data
SVN-Revision: 32456
2012-06-19 10:44:16 +00:00
Felix Fietkau 9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
Felix Fietkau 5f799a0e97 ath9k: make endian check optional
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

SVN-Revision: 31084
2012-03-27 13:21:53 +00:00
Gabor Juhos faf82f3e10 generic: ar8216: add support for the AR8327 chip
SVN-Revision: 31011
2012-03-18 22:06:55 +00:00
Felix Fietkau b957208807 swconfig: use a mutex instead of a spinlock, many swconfig calls sleep
SVN-Revision: 30952
2012-03-15 19:32:31 +00:00
Gabor Juhos 759c341e68 generic: swconfig: add a generic get_port_link implementation
SVN-Revision: 30839
2012-03-07 16:32:33 +00:00
Gabor Juhos 799e9cbec8 generic: add disable_[25]ghz to struct rt2x00_platform_data
SVN-Revision: 30630
2012-02-18 17:36:13 +00:00
Gabor Juhos 1c4f6b4308 generic: add WPE72 ID to myloader.h
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29911
2012-01-26 17:01:38 +00:00
Gabor Juhos 8b567fb508 generic: add driver for the RTL8367R/M switches
SVN-Revision: 29678
2012-01-07 19:36:31 +00:00
Gabor Juhos 5fa65cba6e kernel: swconfig: introduce a generic switch LED trigger
SVN-Revision: 29627
2011-12-31 15:02:30 +00:00
Gabor Juhos 975355a2b1 kernel: swconfig: add get_port_{link,stats} callbacks
SVN-Revision: 29625
2011-12-31 15:02:24 +00:00
Felix Fietkau e3017bc05e ath9k: add support for registering extra leds connected to the wmac gpio lines
SVN-Revision: 29530
2011-12-14 20:21:36 +00:00
Felix Fietkau 4a441570ca kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets
SVN-Revision: 29516
2011-12-13 15:14:59 +00:00
Jonas Gorski eaa935658b swconfig: Add generic switch identifiers
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.

SVN-Revision: 27800
2011-07-27 18:00:18 +00:00
Felix Fietkau 5b32d62fcf rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB
SVN-Revision: 27755
2011-07-24 14:40:31 +00:00
Felix Fietkau 1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
Gabor Juhos 129217e127 generic: add rt2x00_platform.h
SVN-Revision: 27390
2011-07-03 15:01:57 +00:00
Gabor Juhos 4f1f672d9e generic: rtl8366s: allow initial register values to be passed via platform_data
SVN-Revision: 25120
2011-01-26 20:35:46 +00:00
Felix Fietkau bd6324190f swconfig: cleanup of kernel drivers and interface - add some comments to a few data structures - add a switch_dev_ops data structure for attributes and callback to replace the stupid template memcpy - get rid of the switch_dev.priv pointer - using container_of() is better
SVN-Revision: 22476
2010-08-04 00:43:40 +00:00
Gabor Juhos 4bb11f9a39 generic: move ath5k_platform.h from ar71xx to generic files
SVN-Revision: 22189
2010-07-15 07:36:58 +00:00
Felix Fietkau da1bb88a2b rename target/linux/generic-2.6 to generic
SVN-Revision: 21952
2010-06-26 20:42:58 +00:00