46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
4e8f7f37ed
Change default IPv6 config to enable DHCPv6-PD
...
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
151cadfe32
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
71a51e3b91
x86/alix2: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36253
2013-04-07 15:53:11 +00:00
15d311ec18
x86/alix2: switch to 3.8
...
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36252
2013-04-07 15:53:09 +00:00
9d05b1b683
x86/alix2: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36251
2013-04-07 15:53:08 +00:00
45b24fa771
kernel: add some missing config options found by the buildbot.
...
SVN-Revision: 35945
2013-03-10 20:25:19 +00:00
23b3b3a194
kernel: update linux 3.7 to 3.7.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
3f749d1e8e
kernel: update linux 3.7 to 3.7.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
162b8e23a5
kernel: update linux 3.7 to 3.7.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
bae4bfe3f8
kernel: update linux 3.7 to 3.7.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
08ff976720
kernel: update linux 3.7 to 3.7.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
ab3e3cacaa
alix2: convert from kernel version 3.3.8 to 3.7.5
...
[juhosg: use 3.7.5 instead of 3.7.3]
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35457
2013-02-02 15:31:52 +00:00
741f6ba7ef
x86: fix typo in alix2/net5501 default packages
...
SVN-Revision: 34972
2013-01-02 16:09:23 +00:00
07b5a3eea2
x86: remove support for old kernels
...
SVN-Revision: 31804
2012-05-18 20:10:42 +00:00
604e3aac0a
x86: remove subtarget specific LINUX_VERSION overrides
...
SVN-Revision: 31803
2012-05-18 20:10:38 +00:00
eb2fe5e863
x86/alix2: switch to 3.3
...
Compile tested only.
SVN-Revision: 31753
2012-05-16 10:45:02 +00:00
19f691f8e4
x86: sync 3.2 configs
...
SVN-Revision: 31750
2012-05-16 10:44:52 +00:00
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
22b4e6b882
kernel: update linux 3.2 to 3.2.16
...
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
d0bfc67e2e
kernel: x86: also update subtarget kernel versions
...
SVN-Revision: 31338
2012-04-17 21:01:43 +00:00
884f964e62
alix2: add require crypto kmods ( #10410 )
...
SVN-Revision: 30980
2012-03-18 18:56:02 +00:00
834be6c1fe
alix2, geos: Adjust CFLAGS
...
Clone of CFLAGS change from r30013 into Geos and Alix platforms.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 30353
2012-02-07 13:00:47 +00:00
c433bfb571
disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config
...
SVN-Revision: 30024
2012-02-03 19:47:55 +00:00
7a36f3d2ff
x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
...
SVN-Revision: 30019
2012-02-03 18:02:57 +00:00
7a9e4ffe8e
alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility
...
SVN-Revision: 30000
2012-02-02 19:11:52 +00:00
bf8bb9b661
alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad
...
SVN-Revision: 29999
2012-02-02 19:06:22 +00:00
047ba1e12e
alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest
...
SVN-Revision: 29998
2012-02-02 19:00:40 +00:00
3310df6b52
alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver.
...
[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/ ]
SVN-Revision: 29981
2012-02-01 15:31:23 +00:00
be49daffc8
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
d6f02b62d4
add timeserver config to target specific system configs as well
...
SVN-Revision: 28750
2011-11-04 12:53:35 +00:00
c0a625ffbf
Add patch for linux-3.0 as well.
...
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55
SVN-Revision: 28356
2011-10-03 03:09:20 +00:00
541aa8e38e
A lot of these options get set automatically when Geode is selected.
...
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27
SVN-Revision: 28353
2011-10-03 03:02:42 +00:00
d2652dee9d
update alix2 platform driver
...
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 28081
2011-08-25 09:35:45 +00:00
7ef004a144
Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"
SVN-Revision: 27929
2011-08-08 02:33:18 +00:00
4da138d899
x86/alix2: include WAN interface by default
...
Include WAN interface by default, instead of putting both ports in the LAN bridge.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27787
2011-07-26 16:37:48 +00:00
41db64f8e0
x86/alix2: fix typo in target makefile
...
Cut and paste cruft from borrowing from Geos platform.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27786
2011-07-26 16:37:44 +00:00
2975f0aaf1
alix2: add/subtract features as needed
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27411
2011-07-03 17:39:24 +00:00
1f6047496e
alix2: add config files for bridging
...
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 27286
2011-06-25 22:05:05 +00:00
9567b93e5c
x86: add additional companion chip drivers to alix2 and geos
...
Add the MFGPT high precision timers, and integration into the schedule (clock events).
Use OHCI, not UHCI usb module.
Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27038
2011-05-31 16:57:05 +00:00
68af223efe
x86: remove pata-amd driver from generic x86 images, add addition cs553x modules
...
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.
Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27037
2011-05-31 16:57:01 +00:00
f2c86a3835
Simple typo for kmod- prefix in alix2 target makefile.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26945
2011-05-19 04:29:40 +00:00
8d66bf7e72
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
...
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26880
2011-05-13 06:08:49 +00:00
Gabor Juhos
Steven Barth
Hauke Mehrtens
Felix Fietkau
Jonas Gorski
Jo-Philipp Wich
Vasilis Tsiligiannis
Daniel Dickinson
Florian Fainelli
John Crispin