Commit Graph

26484 Commits (6b62eef492b5ad73e1367ab52085f61a3f992400)

Author SHA1 Message Date
Florian Fainelli bd540554a4 brcm63xx: 96368MVWG supports USB gadget, enable it
Enable the use of the USB gadget device at the board level so we can use
bcm63xx_udc on this board.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39292
2014-01-14 23:56:46 +00:00
Florian Fainelli 092a7105ec brcm63xx: replace gadget driver build fix with upstream submission
Also fixing a build warning due to a misplaced parenthesis in the
previous submission.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39291
2014-01-14 23:56:28 +00:00
Hauke Mehrtens 45e3898a11 gpio-button-hotplug: add wwan button
The wimax key will be used as a generic wwan key starting with Linux
3.13. The brcm47xx target uses this key for the 3g buttons. Also remove
the ifdef around KEY_WPS_BUTTON, this is in the kernel for a long time
now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39290
2014-01-14 23:11:10 +00:00
Hauke Mehrtens bf662d7cb0 packages: kernel: reverse kernel dependencies logic
This will select the correct dependencies also for more recent kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39289
2014-01-14 22:51:30 +00:00
John Crispin 4ae2d6f293 hostapd: fix mcast_rate setting
Introduced by ("netifd: add wireless configuration support and port mac80211 to
the new framework")

Reported-by: René van Weert <r.vanweert@sowifi.com>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

SVN-Revision: 39288
2014-01-14 19:35:55 +00:00
Zoltan Herpai 795db05efb ipt-tproxy: nf_tproxy_core was moved out of 3.12, adding a check for kernel version
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39287
2014-01-14 14:09:35 +00:00
Florian Fainelli 01f465df05 brcm63xx: add support for the BCM96318REF_P300 board
Very similar to the BCM96318REF board except for the name and the
SDRAM/DDR configuration which is totally transparent for us.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39286
2014-01-14 05:24:19 +00:00
Florian Fainelli c104e863d3 busybox: enable the devmem applet
The devmem applet allows poking at HW registers and as such is a
valuable tool to have to avoid recompiling kernels or resorting to
external HW adapters to modify HW behavior.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39285
2014-01-14 05:24:09 +00:00
Florian Fainelli 6f48336dc4 brcm63xx: enable 6318 support
BCM6318 support is usable enough to be enabled by default, turn it on.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39284
2014-01-14 05:23:58 +00:00
Florian Fainelli 93ab8adef2 brcm63xx: add basic support for the BCM96318REF board
Add basic support for the BCM96318REF board which is comprised of:
- HS-SPI flash support
- Ethernet switch support
- USB slave device support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39283
2014-01-14 05:23:49 +00:00
Florian Fainelli 0ecdc42f60 brcm63xx: improve BCM6318 support
Provide clock toggling for the USB host and slave controller as well as
for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use
request_mem_region() as the Roboswitch register overlaps with the
Roboswitch IUDMA channels, hence making the driver return -EBUSY. A
future fix might be to use variable size RSET_ENETSW sizes depending on
the chip we are targetting.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39282
2014-01-14 05:23:39 +00:00
Florian Fainelli 7951993efd brcm63xx: package the USB gadget module (bcm63xx_udc)
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39281
2014-01-14 05:23:20 +00:00
Florian Fainelli 8bdc92f5d6 brcm63xx: target supports USB gadget devices
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39280
2014-01-14 05:23:08 +00:00
Florian Fainelli fb8ae05760 brcm63xx: fix USB gadget build failure after 6345 Ethernet
While adding support for BCM6345 Ethernet, some changes in the macros
ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget
driver fail to build. Fix this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39279
2014-01-14 05:22:59 +00:00
Florian Fainelli a6425f8437 brcm63xx: allow HSSPI registration on 6318
A missing condition check in dev-hsspi.c prevented the controller from
being registered on 6318 where it is fully functional.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39278
2014-01-14 05:22:45 +00:00
Florian Fainelli 49ae212eee brcm63xx: fix build failure on varid
varid might both unused and unitialized when building for e.g: bcm6318,
fix these two warnings turned into errors.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39277
2014-01-14 05:22:31 +00:00
Zoltan Herpai d8afb543d0 sunxi: fix image generation
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39276
2014-01-13 16:18:02 +00:00
Zoltan Herpai 9a1e392592 fix 3.12 dependencies
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39275
2014-01-13 15:47:15 +00:00
Jonas Gorski e83c1ec61c brcm63xx: fix ohci frame number offset
BCM63XX's ohci controller does not need the frame number shift, but that
was guarded with a PPC symbol. Fix this by making the no-fix generally
available.

This is a regression from the previous conversion to ohci platform driver.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39274
2014-01-13 12:21:08 +00:00
Jonas Gorski 1315058bda brcm63xx: fix spi flash setup on (at least) some reference boards
CFE seems to leave the SPI flash mapping in an invalid state after
loading the kernel on some reference boards, so fix it up on boot.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39273
2014-01-13 12:14:12 +00:00
Jonas Gorski 4aa92df0d8 brcm63xx: add initial support for BCM6318
Add inital support for BCM6318, but keep it disabled for now until
most things are supported.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39272
2014-01-13 12:14:02 +00:00
Jonas Gorski 3bdcf040aa brcm63xx: add initial support for BCM63268
Add initial support for the BCM63268 family of SoCs, but keep it
disabled for now as most things don't work yet.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39271
2014-01-13 12:13:51 +00:00
Jonas Gorski ab8897045c brcm63xx: fix the pcie window size
The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big,
not 16 MiB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39270
2014-01-13 12:13:39 +00:00
Jonas Gorski 76164e1a36 brcm63xx: add support for chip variants
Some SoCs have variants which are mostly the same, but use a different
chip id (or not). Add code for detecting them and handling them as
their standard counterparts.

This adds support for e.g. BCM6369.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39269
2014-01-13 12:13:26 +00:00
Jonas Gorski db36359f48 brcm63xx: remove non runtime detect and refresh affinity patches
Remove the non runtime detect code since its effectiveness is dubious
and almost never used.
Also update affinity patches to work on top of it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39268
2014-01-13 12:13:15 +00:00
Jonas Gorski d8ac24b325 brcm63xx: update bmips patches with upstream submission
Update bmips cleanup patches with upstream submission and backport a few
bmips fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39267
2014-01-13 12:13:05 +00:00
Jonas Gorski d9a20b6f46 brcm63xx: spi flash on legacy spi controller needs the workaround
Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs
additional fixes for M25P80, so it remains broken for now.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39266
2014-01-13 12:12:50 +00:00
Jonas Gorski af7e570c3b brcm63xx: fix legacy spi tranfers >= 256 bytes
Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes
are not affected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39265
2014-01-13 12:11:58 +00:00
Jonas Gorski f08f0cafc2 brcm63xx: update HSSPI driver with upstream submission
Update the HSSPI driver with the upstream submitted one that has a
workaround for the auto cs down issue.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39264
2014-01-13 12:11:45 +00:00
Zoltan Herpai d0a757147b sunxi: various changes - rename hstimer DT on sun5i to avoid confusion - add Cubietruck support - select watchdog by default - select rtc in profiles where appropriate - cosmetic changes
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39263
2014-01-12 19:23:29 +00:00
Hauke Mehrtens a248495ae9 x86: remove unused code for kernel 3.7
There are no generic patches for kernel 3.7 any more, remove this stuff.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39262
2014-01-12 19:17:49 +00:00
Zoltan Herpai 01a2ff6925 uboot-sunxi: - add support for Cubietruck - cosmetic change: have the options listed alphabetically
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39261
2014-01-12 19:16:35 +00:00
Hauke Mehrtens 6df49552fc brcm47xx: add brcmsmac + bgmac profile
Signed-off-by: Cody P Schafer <devel@codyps.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39258
2014-01-12 19:04:54 +00:00
Hauke Mehrtens 7987b3aa4d broadcom-diag: remove devices already supported by the kernel
This driver will soon be removed completely and the scripts are already
using the new API.

This also removes bcm57xx_init() which restarts the switch and is now
done by b53.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39257
2014-01-12 18:57:16 +00:00
Hauke Mehrtens f912b47931 brcm47xx: parse model from cpuinfo
Instead of looking into the proc entry provided by broadcom-diag use
the board info from /proc/cpuinfo to get the board we are on.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39256
2014-01-12 18:56:57 +00:00
Hauke Mehrtens bcdea80b0b brcm47xx: fix led indication
Use the new led api also on brcm47xx.
The led for failsafe indication is searched for.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39255
2014-01-12 18:56:36 +00:00
Hauke Mehrtens edab966e45 brcm47xx: fix network failsafe indication
Remove the code used on the old switch driver.
The Ethernet drive is loaded as a module and needs some time to get up
therefor we added some wait function.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39254
2014-01-12 18:56:15 +00:00
Hauke Mehrtens f4f31511fd brcm47xx: do not use broadcom-diag
This makes brcm47xx target use the default gpio led and button driver
and not broadcom-diag any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39253
2014-01-12 18:55:52 +00:00
Hauke Mehrtens c2992ee273 brcm47xx: add new led and button support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39252
2014-01-12 18:55:25 +00:00
Hauke Mehrtens 30cf6f5815 brcm47xx: update some patches to versions in linux mainline
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39251
2014-01-12 18:54:38 +00:00
Hauke Mehrtens 7d654de038 brcm74xx: fix patch for BCM4706 CPUs
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39250
2014-01-12 18:51:45 +00:00
Hauke Mehrtens e585841044 brcm47xx: update mtd drivers
This backports some patches from linux upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39249
2014-01-12 18:50:45 +00:00
John Crispin 9821ce8ed6 ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39248
2014-01-12 17:26:24 +00:00
Gabor Juhos 5b4a7953be mpc85xx: preallocate SPI transfer buffer
This helps to avoid high order alloction failures.
Closes #14702.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39247
2014-01-12 14:16:18 +00:00
John Crispin c990d04026 ubox: welcome to 2014
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39246
2014-01-12 14:07:01 +00:00
John Crispin 03ef20ce6f ralink: fix eeprom loading
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39245
2014-01-12 14:03:15 +00:00
John Crispin 09a06d937e ubox: update to latest git - fixes error reporting Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39244
2014-01-12 14:03:10 +00:00
John Crispin 4bf844e834 firmware-utils: mkhilinkfw breaks the build bots
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39243
2014-01-12 14:03:05 +00:00
John Crispin 8751499973 Fix build for individual profiles with dashes in names
Config symbols can have regular dashes, e.g.

CONFIG_TARGET_ramips_rt305x_UR-336UN=y

So no substitution should be performed on the last part of the symbol.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 39242
2014-01-12 12:27:32 +00:00
John Crispin 4282d796ea ralink: fix WHR-600D and WHR-300HP image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39241
2014-01-12 12:12:58 +00:00