hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
24,378 Commits
4 Branches
8 Tags
167 MiB
Commit Graph

10376 Commits (6a4e78dca6ecd4325504f0a74cd1816275157eea)

Author SHA1 Message Date
John Crispin 036fb79052 ramips: drop 3.7 support 
Signed-off-by; John Crispin <blogic@openwrt.org>

SVN-Revision: 36572
 2013-05-07 10:58:44 +00:00
John Crispin 16a17b318a ramips: properly setup the FEATURES variable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36571
 2013-05-07 10:58:30 +00:00
John Crispin bd6e12d904 ramips: fix memory detection rt5350 
Signed-off-by: Felix Kaechele <felix@fetzig.org>

SVN-Revision: 36568
 2013-05-06 18:23:56 +00:00
John Crispin 899120ddef ramips: enable dsp extensions for rt305x and rt3883 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36567
 2013-05-06 16:45:59 +00:00
John Crispin 849ff98669 ramips: fix fypo in ethernet driver rt288x, rt3883 
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 36565
 2013-05-06 16:45:43 +00:00
John Crispin eddd7f5773 ramips: Update ARC Freestation profile 
These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36564
 2013-05-06 16:45:35 +00:00
John Crispin 4f1ff28f08 ramips: Support setting active_low in devicetree gpio-export 
Support setting active_low in devicetree gpio-export.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36563
 2013-05-06 16:45:27 +00:00
John Crispin 6af3b6721b ralink: unbreak uart pinmux handling 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36562
 2013-05-06 16:45:20 +00:00
John Crispin 7c04b3bd66 ramips: fix gpio base numbering 
make banks 0 based to unbreak userland ABI

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36561
 2013-05-06 16:45:12 +00:00
John Crispin 338ff04cab ramips: add gpio base properties to dtsi files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36560
 2013-05-06 16:45:04 +00:00
John Crispin 65760ede8b ramips: unbreak rt2880 support 
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36559
 2013-05-06 16:44:56 +00:00
John Crispin 28bdb9efe9 ramips: fix DIR-602D1 flash size 
Fix DIR-620D1 flash size.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 36558
 2013-05-06 16:44:47 +00:00
John Crispin 1c89a60431 ramips: unbreak gpio handling for uart mux group 
this should fix the handling of corner cases

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36543
 2013-05-04 11:36:51 +00:00
Gabor Juhos bb429757c8 at91: build .dtb file for the CalAmp LMU500 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36542
 2013-05-03 19:01:00 +00:00
Gabor Juhos ccf95fe938 ar71xx: Fix AP135 PCI 
AP135 has a pluggable PCIE slot unlike AP136.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36541
 2013-05-03 19:00:58 +00:00
Felix Fietkau 18c588a570 ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36530
 2013-05-03 09:12:19 +00:00
Felix Fietkau 30c4360345 kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36529
 2013-05-02 15:59:57 +00:00
Jonas Gorski 24636fcabf bcm63xx: split into two subtargets, generic and SMP 
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36527
 2013-05-02 15:28:31 +00:00
Jonas Gorski d11efa1428 bcm63xx: add SMP support for BCM6362 and BCM6368 
BCM6358 requires further work due to its shared TLB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36526
 2013-05-02 15:28:26 +00:00
Jonas Gorski 8f15326acc kernel: generic: don't strip /proc/irq on SMP 
/proc/irq is needed for changing the SMP affinity of interrupts.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36525
 2013-05-02 15:28:12 +00:00
Jonas Gorski a80a4f3ec2 bcm63xx: fix hsspi flash registration for BCM6362 
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36524
 2013-05-02 15:28:10 +00:00
Jonas Gorski 999a956f4c bcm63xx: fix/enable livebox minipci 
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 36523
 2013-05-02 15:28:07 +00:00
Jo-Philipp Wich 6ac2b3b76a atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead. 
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/.

SVN-Revision: 36513
 2013-05-02 11:46:53 +00:00
Gabor Juhos 8a9fe26f20 kernel: update linux 3.8 to 3.8.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
 2013-05-01 22:15:18 +00:00
Florian Fainelli db02b0e4ee brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch 
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36506
 2013-05-01 21:52:25 +00:00
Florian Fainelli 292368409e brcm63xx: add missing binary operands to BCM6345 ethernet patch 
Thanks to Emilio Arias for reporting it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36505
 2013-05-01 21:12:40 +00:00
Florian Fainelli 6f48ccea02 brcm63xx: remove 3.7 kernel support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36504
 2013-05-01 21:12:26 +00:00
Gabor Juhos 0ae43dbe9d ar71xx: rename WNR2000v3 support patch 
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36498
 2013-04-30 10:44:11 +00:00
Gabor Juhos d557a51a40 x86/geos: switch to 3.8.10 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36496
 2013-04-30 10:44:09 +00:00
Gabor Juhos 0fa71ca3e5 linux/3.9: implement pcibios_get_phb_of_node for MIPS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36495
 2013-04-30 10:44:08 +00:00
Gabor Juhos 41445b41cc linux/3.8: use backported pcibios_get_phb_of_node patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36494
 2013-04-30 10:44:07 +00:00
Gabor Juhos f718179af5 kernel: update linux 3.8 to 3.8.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
 2013-04-30 10:43:59 +00:00
Gabor Juhos 8e466dcdf4 at91: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36492
 2013-04-30 10:43:58 +00:00
Gabor Juhos d35545f3d7 linux/3.{8,9}: add missing symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36491
 2013-04-30 10:43:57 +00:00
Gabor Juhos 25c45c0d53 linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL 
It is forced to 'y' since r36342.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36490
 2013-04-30 10:43:56 +00:00
John Crispin eff12a630d ramips: move dlink profile to correct sub folder - 2nd try 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36489
 2013-04-30 10:34:20 +00:00
John Crispin 1db4587bc7 ramips: move dlink profile to correct sub folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36487
 2013-04-30 08:24:26 +00:00
Hauke Mehrtens ca7f9638d5 broadcom-diag: support for the WNDR3700v3 
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 36482
 2013-04-28 21:11:17 +00:00
Hauke Mehrtens 7dee0dae35 brcm47xx: use kernel 3.8.10 as default kernel 
The biggest change with this kernel is a new partition parser.

SVN-Revision: 36480
 2013-04-28 18:25:16 +00:00
Hauke Mehrtens 00a7ace7cf brcm47xx: add board detection for NETGEAR WNDR4500 V2 
SVN-Revision: 36478
 2013-04-28 18:19:31 +00:00
Hauke Mehrtens e7e4afbb64 kernel: fix a memory leak in split_rootfs_data() 
allocate_partition() copies all the content of dpart into a new struct.

SVN-Revision: 36475
 2013-04-28 17:01:56 +00:00
Hauke Mehrtens 1bac172c44 kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. 
SVN-Revision: 36473
 2013-04-28 16:52:11 +00:00
Jonas Gorski ad1d3f00cb kernel: update linux 3.9 patches to rc8 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36469
 2013-04-28 11:55:23 +00:00
Jonas Gorski a33dd13c98 kernel: add missing bcma defines and header file for bcrmfmac 
Fixes build failure when having kmod-mmc and brcmfmac selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36468
 2013-04-28 11:10:42 +00:00
Gabor Juhos 7c2632fbc5 ar71xx: add user-space support for WNR2000v3 
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36461
 2013-04-26 17:00:54 +00:00
Gabor Juhos b29b7b65ea ar71xx: add profile and build image for WNR2000v3 
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36460
 2013-04-26 17:00:53 +00:00
Gabor Juhos 9b3c0d11a2 ar71xx: Add Netgear WNR2000v3 support 
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36459
 2013-04-26 17:00:52 +00:00
Gabor Juhos 183e2af1c7 ar71xx: add profile and build image for the TL-WR720N v3 board 
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36458
 2013-04-26 17:00:50 +00:00
Gabor Juhos 7c4e2c1f72 ar71xx: add user-space support for the TL-WR720N v3 board 
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36457
 2013-04-26 17:00:49 +00:00
Gabor Juhos 5c11773f8a ar71xx: add kernel support for TPLINK WR720N v3 
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.

The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.

Tested on my device and they worked fine.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36456
 2013-04-26 17:00:48 +00:00
Gabor Juhos c0691e29f1 mpc85xx: Add subtargets Generic and P1020 
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36454
 2013-04-26 16:57:43 +00:00
Gabor Juhos 36d4fd70bc kernel: update linux 3.8 to 3.8.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
 2013-04-26 16:55:42 +00:00
Gabor Juhos 988ae9cbf8 at91: upgrade to kernel 3.8.7 and use devicetree 
This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.

Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36452
 2013-04-26 16:55:40 +00:00
Gabor Juhos c63bb1a18e ramips: rt3883: fix build error 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36451
 2013-04-26 16:55:28 +00:00
John Crispin b42a173664 lantiq: make leds and network work on VG3503J 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
 2013-04-25 19:03:41 +00:00
John Crispin 520bf46375 lantiq: fix board detection helpers 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36444
 2013-04-25 19:03:37 +00:00
John Crispin 157c86371f lantiq: move dts files to thir own folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
 2013-04-25 19:03:32 +00:00
John Crispin 4664e21293 generic: fix rtl8366_smi compile warning 
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36442
 2013-04-25 19:03:29 +00:00
John Crispin 9ae3adbe3c lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36441
 2013-04-25 19:03:25 +00:00
John Crispin d3d18ae812 lantiq: make lzma-loader based images for VG3503J 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36440
 2013-04-25 19:03:21 +00:00
John Crispin a46acc80e4 lantiq: update VG3503J.dts to match new partition layout 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36439
 2013-04-25 19:03:17 +00:00
John Crispin 46306c2e47 lantiq: add lzma-loader source 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36438
 2013-04-25 19:03:13 +00:00
John Crispin e141b73f9d ramips: remove now unneeded user-space board detection 
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36436
 2013-04-25 19:03:05 +00:00
John Crispin cf3885eb0f ramips: introduce DTS for ALL5003 
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36435
 2013-04-25 19:03:01 +00:00
John Crispin 978567a89e ramips: set preinit interface to eth0 by default. 
This makes any ramips device accessible via ethernet in failsafe mode.

Based on: https://dev.openwrt.org/changeset/36322

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36434
 2013-04-25 19:02:57 +00:00
John Crispin 7bfab6e308 ramips: Add Alpha ASL-26555 support. 
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36433
 2013-04-25 19:02:53 +00:00
John Crispin c7216d0cab ramips: Add support of D-link DIR-620D1 
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36432
 2013-04-25 19:02:48 +00:00
John Crispin deb3635923 ramips: sync kernel patches with the mips-next tree 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36431
 2013-04-25 19:02:42 +00:00
John Crispin 831c7ea04f preinit: move cmdline failsafe= handling ot the generic code 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36430
 2013-04-25 19:02:37 +00:00
Jonas Gorski 90986b5581 bcm63xx: update patches with upstream submissions 
SVN-Revision: 36407
 2013-04-23 13:55:36 +00:00
Jonas Gorski 2a1a16d2d5 bcm63xx: switch to linux 3.8 
SVN-Revision: 36406
 2013-04-23 13:55:17 +00:00
Steven Barth 4e8f7f37ed Change default IPv6 config to enable DHCPv6-PD 
SVN-Revision: 36384
 2013-04-22 19:40:16 +00:00
Felix Fietkau a8a01b42ae kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL 
SVN-Revision: 36378
 2013-04-22 15:01:36 +00:00
Felix Fietkau cd35ea2174 ar71xx: merge more unaligned access hacks from cerowrt-next 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36374
 2013-04-22 12:53:21 +00:00
Felix Fietkau f58dcb59c6 kernel: backport SSB/BCMA changes in preparation for a compat-wireless update 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36367
 2013-04-19 12:39:40 +00:00
Gabor Juhos f03960723a linux/3.9: add missing config symbol 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36365
 2013-04-19 08:07:38 +00:00
Gabor Juhos e07848664c linux/3.[89]: update bridge_remove_ipv6_dependency patch 
Fixes the following warning:

    CC [M]  net/ipv6/addrconf.o
  net/ipv6/addrconf.c: In function 'addrconf_init':
  net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36364
 2013-04-19 08:07:37 +00:00
Gabor Juhos 151cadfe32 kernel: update linux 3.8 to 3.8.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
 2013-04-19 08:07:34 +00:00
Felix Fietkau 96bb7c123b build: consistently use 'depends on' instead of 'depends' 
make the syntax more compatible with kernel menuconfig

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36351
 2013-04-17 15:36:41 +00:00
John Crispin e3003ea2a9 fix prepare_generic_squashfs 
prepare_generic_squashfs was called twice on the generated images breaking mount_root

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36349
 2013-04-17 11:54:09 +00:00
John Crispin 8001e6a689 fix rt305x gpio 
https://dev.openwrt.org/ticket/13359

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36343
 2013-04-16 06:58:18 +00:00
Felix Fietkau a662200205 kernel: force CONFIG_NET_SCHED=y for fq_codel (#13360) 
SVN-Revision: 36342
 2013-04-15 20:40:29 +00:00
Imre Kaloz 57b68daee9 refresh against -rc7 
SVN-Revision: 36340
 2013-04-15 16:10:01 +00:00
Gabor Juhos 604395650a kernel: update linux 3.8 to 3.8.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
 2013-04-14 09:25:53 +00:00
Gabor Juhos 68c54dc34f mpc85xx: use static SPI bus number for TL-WDR4900 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36329
 2013-04-12 19:44:41 +00:00
Gabor Juhos 54635e7f78 linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36328
 2013-04-12 19:44:38 +00:00
John Crispin d3a46c4b7f update rt2880 config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36327
 2013-04-12 18:57:01 +00:00
John Crispin 92259c4803 fix up the rt2880 patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36326
 2013-04-12 18:56:53 +00:00
John Crispin a6424245e6 fix RT-N15 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36325
 2013-04-12 18:56:44 +00:00
John Crispin 7af1fa46ad update rt2880.dtsi 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36324
 2013-04-12 18:56:36 +00:00
John Crispin 10f432ba9d fix rtl8366s OF binding 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36323
 2013-04-12 18:56:05 +00:00
Gabor Juhos 687b3f04ce mpc85xx: set preinit interface to eth0 by default 
This makes the WDR4900 accessible via ethernet in
failsafe mode.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36322
 2013-04-12 18:30:25 +00:00
Gabor Juhos 40e15b1fbf mpc85xx: Generate fdt for P1020RDB 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36321
 2013-04-12 18:30:24 +00:00
Gabor Juhos f43bdf34cd mpc85xx: Add P1020RDB board support 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36320
 2013-04-12 18:30:22 +00:00
John Crispin d5f87e193c add VG3503J support 
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36315
 2013-04-11 19:18:07 +00:00
John Crispin fbc1e3732b add FE phy firmware 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36314
 2013-04-11 19:17:48 +00:00
John Crispin 0d32469457 add missing pinmux patch 
Fix lantiq pinmux which affected PCI and USB.

Known affected boards are: ARV4518 and ARV7518.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36312
 2013-04-11 07:12:37 +00:00
Felix Fietkau 6436b3f736 cns3xxx: fix USB ehci/ohci platform driver 
Update ehci/ohci driver registration to conform to the new platform
drivers.

This fixes missing USB host support in 3.8.x

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 36309
 2013-04-10 16:20:50 +00:00
Felix Fietkau edd8048107 kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base 
Fixes booting on single-core CNS3xxx devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36308
 2013-04-10 16:07:50 +00:00
Felix Fietkau 06733c2650 kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36307
 2013-04-10 13:45:12 +00:00
Felix Fietkau 7fa2957103 kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36304
 2013-04-10 13:11:29 +00:00
Felix Fietkau df3d4690bd kernel: keep dropped stats in fq_codel 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36303
 2013-04-10 13:11:25 +00:00
Felix Fietkau ec3a8846fc kernel: tune fq_codel defaults for common netdevice speeds 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36302
 2013-04-10 13:11:21 +00:00
Felix Fietkau 307965026a kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36301
 2013-04-10 13:11:16 +00:00
Florian Fainelli 915969ff2c kernel: refresh patches against 3.9-rc6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36297
 2013-04-09 16:16:20 +00:00
Florian Fainelli c3366cd164 kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c 
Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones.

Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36296
 2013-04-09 16:16:16 +00:00
Florian Fainelli 518d6a9273 kernel: backport switch user API changes after r36283 
3.3 and 3.6 kernels do not make use of the UAPI headers, still they need
to provide an up-to-date switch.h copy for swconfig to build.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36295
 2013-04-09 15:47:01 +00:00
John Crispin fb47fd0d6b unbreak portmapping - typo fix 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36293
 2013-04-09 14:39:01 +00:00
John Crispin bc7b310959 move memory detect node to dtsi files 
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36290
 2013-04-09 14:19:36 +00:00
John Crispin 48feea4861 Add Netgear WNCE2001 (OF version) 
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
 2013-04-09 14:19:33 +00:00
John Crispin e468abcae0 remove bootargs from dts 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36288
 2013-04-09 14:19:28 +00:00
John Crispin 82c3b7ce26 add ofpart info to the devicetrees 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36287
 2013-04-09 14:19:24 +00:00
John Crispin f1e9d30ffc add sample swconfig portmap 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36286
 2013-04-09 14:19:20 +00:00
John Crispin fcd962cc71 set of_node before registring the switch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36285
 2013-04-09 14:19:17 +00:00
John Crispin fff58a5801 allow loading port maps from OF 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36283
 2013-04-09 14:19:09 +00:00
Steven Barth ea94d66b0f Adapt default network configuration for IPv6 
SVN-Revision: 36278
 2013-04-09 08:03:08 +00:00
Gabor Juhos 130f67210a ramips: TEW-691GR.dts fixes 
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36276
 2013-04-08 12:34:17 +00:00
Gabor Juhos a4a148f222 ramips: rt3883: enable the AR8216 driver 
It is needed for the TEW-69{1,2}GR boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36275
 2013-04-08 12:34:15 +00:00
Gabor Juhos a9d977b2af ramips: add profile for the Omnima EMB-HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36274
 2013-04-08 11:12:04 +00:00
Gabor Juhos 82705b30b3 ramips: OMNI-EMB-HPM.dts fixes 
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36273
 2013-04-08 11:12:03 +00:00
Gabor Juhos 909fabe574 ramips: add mdio-bus node to rt3883.dtsi 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36272
 2013-04-08 11:12:02 +00:00
Gabor Juhos 78ee80f2e8 ramips: fix MDIO/PHY handling 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36271
 2013-04-08 11:12:01 +00:00
Gabor Juhos 30e5bae84a ramips: fix console speed for OMNI-EMB-HPM 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36270
 2013-04-08 08:24:51 +00:00
Gabor Juhos cd7ce5226d ramips: avoid invalid pointer dereference in pinmux code 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36269
 2013-04-08 08:24:50 +00:00
Gabor Juhos 4c85227cf4 ramips: TEW-692GR.dts fixes 
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36268
 2013-04-08 07:11:35 +00:00
Gabor Juhos 97635d7a8e ramips: add PCI node into RTN56U.dts 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36264
 2013-04-07 20:56:22 +00:00
Gabor Juhos 474264f64c ramips: add PCI node for rt3883.dtsi 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36263
 2013-04-07 20:56:21 +00:00
Gabor Juhos 6c8951313c ramips: rt3883: enable PCI support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36262
 2013-04-07 20:56:20 +00:00
Gabor Juhos b6b0a8fbee ramips: fix RT3883 PCI driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36261
 2013-04-07 20:56:18 +00:00
Gabor Juhos 1700bf5b2e ramips: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36260
 2013-04-07 17:05:05 +00:00
Gabor Juhos 6de8743e44 ramips: add missing cpu-feature-override.h files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36259
 2013-04-07 17:05:04 +00:00
Gabor Juhos 68875710fd ramips: fix broken patch name 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36258
 2013-04-07 16:26:27 +00:00
Gabor Juhos 16d0ce52b0 ramips: fix polarity of GPIO buttons for RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36257
 2013-04-07 16:24:33 +00:00
Gabor Juhos 9e6ae6ab5d x86/generic: remove old kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36256
 2013-04-07 15:53:17 +00:00
Gabor Juhos 0d0bfe3d41 x86/generic: switch to 3.8 
Only tested within a VM.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36255
 2013-04-07 15:53:15 +00:00
Gabor Juhos f5d28ea3ce x86/generic: add config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36254
 2013-04-07 15:53:13 +00:00
Gabor Juhos 71a51e3b91 x86/alix2: remove old kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36253
 2013-04-07 15:53:11 +00:00
Gabor Juhos 15d311ec18 x86/alix2: switch to 3.8 
Tested on an alix2d13 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36252
 2013-04-07 15:53:09 +00:00
Gabor Juhos 9d05b1b683 x86/alix2: add config for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36251
 2013-04-07 15:53:08 +00:00
Gabor Juhos 89f690843f x86: add support for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36250
 2013-04-07 15:53:05 +00:00
Gabor Juhos d1f28c6d1f ramips: add nor-flash node for the RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36249
 2013-04-07 14:46:11 +00:00
Gabor Juhos 0c3c29ca38 ramips: fix pinmux settings for the RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36248
 2013-04-07 14:46:10 +00:00
Gabor Juhos 66fbe78a93 ramips: pinmux fixes 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36247
 2013-04-07 14:46:09 +00:00
Gabor Juhos aedf05caa0 ramips: remove trailing whitespaces from dts files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
 2013-04-07 13:32:37 +00:00
Gabor Juhos 017aabe292 ramips: handle PCI interrupts in plat_irq_dispatch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36245
 2013-04-07 13:25:38 +00:00
John Crispin 811f7f9f2d fix typos inside dts files 
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
 2013-04-07 11:47:03 +00:00
John Crispin 709b19ed9f fix default commandline in dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
 2013-04-07 11:46:54 +00:00
Gabor Juhos 85675528da ramips: add cfi_cmdset_0002 patches 
The parallel flash access on the RT-N56U is broken
without those patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36242
 2013-04-07 11:37:15 +00:00
Felix Fietkau fde143b66f cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36241
 2013-04-07 11:24:30 +00:00
Gabor Juhos 10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files 
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
 2013-04-07 08:19:10 +00:00
Hauke Mehrtens 4a46687d25 brcm47xx: use old partition names again for kernel 3.8 
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

Thank you russell for spotting this problem.

SVN-Revision: 36235
 2013-04-06 22:22:26 +00:00
Hauke Mehrtens 204bde8d98 brcm47xx: fix error in board detection when nvram is not available. 
SVN-Revision: 36234
 2013-04-06 19:02:25 +00:00
Gabor Juhos d45ef216e6 linux/3.8: implement pcibios_get_phb_of_node for MIPS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36233
 2013-04-06 17:33:03 +00:00
Gabor Juhos 51fa28e2c2 linux/3.8: backport devm_ioremap_resource from 3.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36232
 2013-04-06 17:33:00 +00:00
Gabor Juhos 756b810178 ramips: fix ethernet switch node in DIR-645.dts 
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
 2013-04-06 17:19:35 +00:00
Gabor Juhos 747b795b56 generic: rtl8367: add compatible string with vendor prefix 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36230
 2013-04-06 17:19:31 +00:00
Gabor Juhos f5d8d80ca9 generic: rtl8367b: fix rtl8367b_extif_init_of 
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36229
 2013-04-06 17:03:09 +00:00
Gabor Juhos 32d3b456f0 linux/3.8: add more missing symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36228
 2013-04-06 16:56:47 +00:00
Gabor Juhos 89539462a8 linux/3.8: add missing symbol 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36226
 2013-04-06 16:38:36 +00:00
Gabor Juhos 1ef39b43dd ramips: remove spi node from RTN56.dts 
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
 2013-04-06 12:37:40 +00:00
Gabor Juhos d57e662cda ramips: fix ethernet switch node in RTN56U.dts 
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
 2013-04-06 12:37:38 +00:00
Gabor Juhos 4becd8590c ramips: rt3883: enable the RTL8367 driver 
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36221
 2013-04-06 12:37:37 +00:00
Gabor Juhos 38bd9b4337 generic: rtl8367: allow to load extif config from OF 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36220
 2013-04-06 12:37:36 +00:00
Gabor Juhos 585d19d168 generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36219
 2013-04-06 12:37:34 +00:00
Gabor Juhos 68c931c637 generic: rtl8367: add vendor prefix to the compatible string 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36218
 2013-04-06 12:37:32 +00:00
Gabor Juhos 348640f4b3 ramips: rt3883: sync 3.8 config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36217
 2013-04-06 12:37:31 +00:00
John Crispin d16de0b69f fix typo pinmmux -> pinmux 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
 2013-04-06 11:46:34 +00:00
Gabor Juhos f78c902cfd kernel: update linux 3.8 to 3.8.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
 2013-04-06 11:40:44 +00:00
Gabor Juhos 202fb45deb refresh kernel configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36214
 2013-04-06 11:40:41 +00:00
John Crispin df7af06f1f fix dir-615 h1 network config 
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

SVN-Revision: 36213
 2013-04-05 23:37:45 +00:00
John Crispin e1a74d8ff7 fix typo that made gpiomuxing fail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
 2013-04-05 23:10:42 +00:00
Florian Fainelli 495296bba9 malta: add le64 and be64 sub targets 
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36211
 2013-04-05 12:36:48 +00:00
Florian Fainelli 12b925dcbf malta: move 32-bits options to subtarget config 
Preliminary change to add support for MIPS64-based malta subtargets.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36210
 2013-04-05 12:36:45 +00:00
Florian Fainelli 5eb8ba7f19 malta: move endianness kernel configuration to subtarget 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36209
 2013-04-05 12:36:41 +00:00
Florian Fainelli 348cae15d2 buildroot: factor knowledge of a 64bits architecture 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36204
 2013-04-05 12:36:19 +00:00
Florian Fainelli 46dfa04a08 malta: enable mips16 feature flag 
The malta platform supports mips16 advertise this feature flag.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36203
 2013-04-05 12:36:16 +00:00
Florian Fainelli 9e1d2c15d9 buildroot: allow enabling MIPS16 user-space build 
Enabling MIPS16 is made conditional on advertising the "mips16" feature
for a specific target since it requires support from the CPU
(HAS_MIPS16) and the actual use of MIPS16 for building packages
(USE_MIPS16).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36202
 2013-04-05 12:36:12 +00:00
John Crispin d9bb7ff7a5 Migrate lantiq platform to common led helper functions 
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
 2013-04-03 10:01:07 +00:00
John Crispin a4c745ee74 add a missing patch that makes board detection work again 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36186
 2013-04-03 10:01:03 +00:00
John Crispin c838ec2391 Patch for invoking (pre)init 
http://patchwork.openwrt.org/patch/3485/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36183
 2013-04-03 10:00:50 +00:00
John Crispin 93899a1329 add profile for tenda w150m board 
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
 2013-04-03 10:00:21 +00:00
John Crispin 7e54357bd5 fix ALL5002 default package selection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36175
 2013-04-03 10:00:16 +00:00
John Crispin 37401dca92 Build WW factory image for DAP-1350 
http://patchwork.openwrt.org/patch/3466/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36174
 2013-04-03 10:00:12 +00:00
John Crispin 910b705155 add Huawei D105 
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
 2013-04-03 10:00:08 +00:00
John Crispin c1710901c5 add profile for the Edimax 3g-6200NL board 
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
 2013-04-03 10:00:03 +00:00
John Crispin f3643374c4 there is no ttyS1 console 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36171
 2013-04-03 09:59:59 +00:00
John Crispin 99e0ff1123 make v3.8 the default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36170
 2013-04-03 09:59:55 +00:00
John Crispin c8d5f5e0ef add new image/Makefile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36169
 2013-04-03 09:59:51 +00:00
John Crispin 770b28f146 add the dts files that describe the boards in future 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
 2013-04-03 09:59:46 +00:00
John Crispin 2328e8389e fix upvel profile names 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36167
 2013-04-03 09:59:41 +00:00
John Crispin 94972a5268 fix rt3883 config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36166
 2013-04-03 09:59:37 +00:00
John Crispin 0716ae8abe fix rt305x config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36165
 2013-04-03 09:59:33 +00:00
John Crispin dce4945972 mark rt288x broken until the test hardware arrives in the mail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36164
 2013-04-03 09:59:16 +00:00
John Crispin 46f141637c add patches for v3.8 
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36163
 2013-04-03 09:59:10 +00:00
John Crispin 4f86ea43ca remove old ralink 3.8 patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36162
 2013-04-03 09:58:48 +00:00
John Crispin d4db00205d move files to files-3.7 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36161
 2013-04-03 09:58:44 +00:00
John Crispin 86a691144b add feature gpio 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36160
 2013-04-03 09:58:37 +00:00
John Crispin 1105bd2897 add OF support to rtl8367b driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36159
 2013-04-03 09:58:33 +00:00
John Crispin cc34858d4a make firmware loading work on v3.9 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36158
 2013-04-03 09:58:28 +00:00
Felix Fietkau 72f5901eb1 mpc85xx: enable ath9k and wpad-mini by default 
SVN-Revision: 36142
 2013-04-01 09:53:29 +00:00