Commit Graph

20 Commits (624505df567ada22374f8414df17f867cf8cd77f)

Author SHA1 Message Date
Jonas Gorski 3fc76fb781 bcm63xx: build images for 6328 reference boards with various flash sizes
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

SVN-Revision: 32004
2012-05-30 10:27:46 +00:00
Jonas Gorski e5575fe335 bcm63xx: add support for DSL-274XB rev F1
SVN-Revision: 31882
2012-05-27 13:22:43 +00:00
Jonas Gorski 72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh
SVN-Revision: 31872
2012-05-27 13:22:11 +00:00
Jonas Gorski dd37687de0 bcm63xx: use the exact board id as board identification string
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
2012-05-27 13:22:08 +00:00
Florian Fainelli 16dfe8b4d1 add support for BT Voyager 2110 (#8810)
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 26959
2011-05-20 10:06:25 +00:00
Florian Fainelli 6c8387fe15 add support for DSL-2640B rev B2
Signed-off-by: Adrian Feliks <mexit@o2.pl>

SVN-Revision: 26958
2011-05-20 10:06:22 +00:00
Florian Fainelli 9c8a2d5961 bcm63xx: Add support for the T-Home Speedport W 303V
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
Florian Fainelli 7d3b735854 bcm63xx: Update support for the DSL-274xB revision C
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26876
2011-05-11 13:33:50 +00:00
Daniel Dickinson 44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
SVN-Revision: 24442
2010-12-10 18:59:58 +00:00
Daniel Dickinson 8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
SVN-Revision: 24305
2010-12-07 15:15:54 +00:00
Daniel Dickinson e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
SVN-Revision: 24302
2010-12-07 15:15:41 +00:00
Daniel Dickinson ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
SVN-Revision: 24276
2010-12-06 06:46:03 +00:00
Daniel Dickinson 314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V.
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24190
2010-11-28 22:04:44 +00:00
Daniel Dickinson c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2.
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
2010-11-28 22:04:36 +00:00
Daniel Dickinson fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit.
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
2010-11-28 22:04:26 +00:00
Daniel Dickinson d391ca2c8c base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit
SVN-Revision: 22465
2010-08-02 19:32:59 +00:00
Daniel Dickinson 40c53c6556 brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21629
2010-05-30 01:33:20 +00:00
Daniel Dickinson 82edb6eafa brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21628
2010-05-30 01:33:09 +00:00
Daniel Dickinson bd8cfa63f4 brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21626
2010-05-30 01:32:47 +00:00
Florian Fainelli 0d7f5f8d2c add support for sysupgrade (#5117)
SVN-Revision: 15900
2009-05-17 16:53:57 +00:00