Commit Graph

37894 Commits (60a52cd4b458a23e4b019d7354fba3e40dc26843)

Author SHA1 Message Date
Joseph C. Sible 0bf85ef048 dropbear: enable SHA256 HMACs
The only HMACs currently available use MD5 and SHA1, both of which have known
weaknesses. We already compile in the SHA256 code since we use Curve25519
by default, so there's no significant size penalty to enabling this.

Signed-off-by: Joseph C. Sible <josephcsible@users.noreply.github.com>
2017-02-10 11:05:57 +01:00
Koen Vandeputte 2c416b1db0 cns3xxx: switch to linux 4.9
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-10 11:05:57 +01:00
Koen Vandeputte 1db4135e32 cns3xxx: add preliminary 4.9 support
Adds preliminary kernel 4.9 support for this target.

- Refreshed/Updated all patches

Added 3 new patches:
- 093 --> Add virtual PCI MMIO mapping
- 230 --> Remove deprecated code
- 240 --> Rework AT24 eeprom code to use the new NVMEM API

Compiled & tested on cns3xxx (gw2388)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-10 11:05:57 +01:00
Felix Fietkau b96566aad4 build: drop circular dependency
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-10 11:05:57 +01:00
Felix Fietkau e690280a16 mxs: enable nvmem support
fixes build error due to missing kernel config options

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-10 11:05:57 +01:00
Rafał Miłecki db866154fc kernel: move upstream accepted bcm47xxpart TRX cleanups
Use 0xx prefix for accepted patches.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-10 08:30:16 +01:00
Rafał Miłecki 368cc8ef47 mac80211: update brcmfmac backporting brcmf_err cleanups
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-10 00:40:49 +01:00
Daniel Gonzalez Cabanelas 41ad9ed13a brcm63xx: Add Observa VH4032N support
Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 22:02:45 +01:00
Hans Dedecker be4842f5de odhcpd: update to git HEAD version (FS#396)
8df4253 ndp: harden netlink event socket error handling
b02f3e6 ndp: close proc file descriptor also during error handling
8a615ad npd: rework IPv6 relay logic (FS#396)
0129f79 config: restore interface defaults when cleaning interface

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-02-09 21:20:44 +01:00
Felix Fietkau fe1e3622a2 build: make Host/Install/Default use Host/Compile/Default with an extra argument
Allows parallelizing compile steps that might be necessary during install

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 14:49:35 +01:00
Michal Sojka 202ae4cc6a build: Pass -iremap gcc option as a single argument
Passing -iremap argument separately causes problems with projects that
use scons and its ParseFlags function. Consider this SConscript
example:

    env = Environment()
    d = env.ParseFlags("-iremap one:two")

ParseFlags will interpret one:two as a file name and the returned dict
d will contain only "-iremap". When the -iremap is passed to the
compiler without an argument, compilation obviously fails.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
2017-02-09 14:49:34 +01:00
Felix Fietkau 7096ed58fd kernel: remove kmod packages for bridge, stp, llc and 8021q
Remove CONFIG_VLAN_8021Q overrides for two targets
These features are built into the kernel image for all targets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 14:49:34 +01:00
Felix Fietkau 0f5d17a7e6 toolchain/gcc: parallelize make install
If the staging dir was deleted, the build needs to recompile some files.
This change speeds up this corner case significantly

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 14:49:34 +01:00
Felix Fietkau 43332f513b toolchain/musl: parallelize make install
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 14:49:33 +01:00
Etienne Haarsma 0928b6d2ab cmake: update to version 3.7.2
Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
2017-02-09 14:49:25 +01:00
Jonas Gorski 0127c480bb brcm63xx: Neufbox 6: fix switch by probing through DT
Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski 8b741d5cd1 brcm63xx: fix lzma loader for BCM6362
BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Paul Wassi 9d4f8ff4f6 brcm63xx: add support for Pirelli/ADB P.DG AV4202N
This patch adds support for the ADB P.DG AV4202N aka Pirelli PRG AV4202N.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski 31d5c5bc90 brcm63xx: setup internal switch leds for bcm6368
Setup the GPIO_MODE register bits for used internal switch port leds.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski c7f31b280f brcm63xx: do a full reset phy cycle
Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski dd7079e79a brcm63xx: implement gpio_to_irq for bcm63xx-gpio
Add support for mapping some GPIO lines to IRQs. GPIO to IRQ mappings
were found out through experimentation, helped by having the GPIO as
output still toggling the IRQ input.

Based-on: http://patchwork.ozlabs.org/patch/660534/
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:43 +01:00
Jonas Gorski 94bbd1f057 brcm63xx: fix external interrupts on BCM6318
Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:43 +01:00
Felix Fietkau 66a63d25c4 mac80211: fix build on linux 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 14:22:26 +01:00
Felix Fietkau 3cd7f43017 build: fix package build after deleting staging dir
Ensure that the <package>.provides files are always created

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 13:51:40 +01:00
Felix Fietkau d826af2cbb build: make <subdir>/install opt-in, use it for target/ only
Fixes buildbot errors on running make target/install or
toolchain/install

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 13:51:35 +01:00
Ben Kelly da0b9110fc uclibc++: patch bugfix erase() on derived __base_associative
When calling erase() on a containers derived from __base_associative
(e.g. multimap) and providing a pair of iterators a segfault will
occur.

Example code to reproduce:

	typedef std::multimap<int, int> testmap;
	testmap t;
	t.insert(std::pair<int, int>(1, 1));
	t.insert(std::pair<int, int>(2, 1));
	t.insert(std::pair<int, int>(3, 1));
	t.erase(t.begin(), t.end());

Signed-off-by: Ben Kelly <ben@benjii.net>
2017-02-09 12:26:55 +01:00
Alberto Bursi a9d347c11c uboot-kirkwood: fix goflexhome/net bootcommand
Goflexhome/net use uImage, and to boot an uImage the u-boot
must use bootm command, not bootz.

Fixes the "i cannot boot LEDE with this u-boot" issue that I
found out myself with my goflexnet.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-09 12:26:48 +01:00
Alberto Bursi a6ef5933f8 uboot-kirkwood: remove obsolete patches
all patches for CONFIG_SYS_GENERIC_BOARD are obsolete for
uboot 2016 sources.

Run-tested with the uboot of goflexnet, also the md5sum of
all other uboots is the same with or without these patches.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-09 12:26:42 +01:00
Daniel Engberg 2faa1edd91 iperf3: Update to 3.1.6
Update to 3.1.6

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-02-09 12:26:36 +01:00
Daniel Engberg 0af460b38c utils/e2fsprogs: Update to 1.43.4
* Update to 1.43.4
* Use xz tarball which saves about 2Mbyte in size

Changelog: http://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.43.4

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [use @KERNEL instead of hardcoded URL]
2017-02-09 12:26:25 +01:00
Felix Fietkau 849ced84f6 build: support make tools/<name>/install again
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 12:26:19 +01:00
Daniel Engberg 34ba64fe70 tools/e2fsprogs: Update to 1.43.4
* Update to 1.43.4
* Refresh patches
* xz tarball which saves about 2M in size

Changelog: http://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.43.4

Tested by Etienne Haarsma (ar71xx), Daniel Engberg (kirkwood)

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [use @KERNEL instead of harcoded URL]
2017-02-09 12:26:13 +01:00
Piotr Dymacz f5416b0622 ar71xx: image: drop redundant CONSOLE assignment
Default CONSOLE value for ar71xx target is "ttyS0,115200", so there
is no need to specify the same value in device profiles.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-09 09:45:27 +01:00
Alexey Brodkin aab344d227 arc770: backport upstream fix for unaligned access
This commit reverts 42f3c1f ("arc770: fix broken upstream change")
and simultaneously adds back-ported fix from Linus' tree:
a524c218bc94 ("ARC: [arcompact] brown paper bag bug in unaligned
access delay slot fixup").

Note mentioned patch will appear in stable trees soon as well so
IMHO there's not much sense in adding this separate patch in lede/master branch.
As well as we will get rid of it here in 17.01 once we bump 4.4 kernel here
later down the line.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Jo-Philipp Wich <jo@mein.io>
2017-02-09 09:14:45 +01:00
John Crispin 1f3de99547 procd: update to latest git HEAD
cdc3dab ujail: fix signal forwarding

Signed-off-by: John Crispin <john@phrozen.org>
2017-02-09 09:14:45 +01:00
Claudio Leite 290ca2ba46 ramips: fix AR670W partition alignment
mtdsplit_lzma requires that the rootfs be aligned to a block boundary.
Pad the kernel partition to make this so.

Signed-off-by: Claudio Leite <leitec@gmail.com>
2017-02-09 09:14:45 +01:00
Rafał Miłecki 76eb62e5af kernel: backport bcm47xxsflash support for reading 32 MiB flashes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-09 08:41:23 +01:00
Daniel Golle 9eacb9d7fc rt2x00: mt7620: lots of improvements
This commit combines all the changes I've made on my staging tree
into a single commit fixing many issues with our patch for MT7620.

First of all, checkpatch.pl revealed numerous code style issues with
the patch, so fix all the white-space and commets. Also use
usleep_range instead of legacy timing and relax timing for VCO
calibration just like the vendor driver does.

Several line programming registers were commented out in the patch.
Originally this came from the features present but disabled by default
in the vendor's driver (RTMP_TEMPERATURE_CALIBRATION and
ADJUST_POWER_CONSUMPTION_SUPPORT). Remove the dead code for now, it can
easily be re-added if we actually intend to support those features.

Move values from mt7620_freqconfig type into the existing rf_channel
struct, this shouldn't be a new typedef and it is possible to use the
existing struct because rf_channel got 4 32-bit fields, so two of the
8-bit values from mt7620_freqconfig can easily be stored in the same
32-bit field.

Map values such that
Rdiv -> rf1
N    -> rf2
K    -> rf3[0:7]
D    -> rf3[8:15]
Ksd  -> rf4

This makes the channel switching logic already look a bit more like
what we are used to in rt2x00... Probably many of the read-modify-write
calls could still be replaced by macros intended for that.

iq calibration seems to be identical to RT5592, so just enable it.
Test shows that this improves things quite a lot, datarates went up
by a couple of megabits when running iperf, signal quality seems jumpy
in the first few seconds once a station connencts, the stabelizes on a
value significantly better than what it was before.

Add description to the patch and reference the original OpenWrt commit
by which it was added.

The patch now passes checkpatch.pl and can thus be discussed with the
upstream authors of the rt2x00 driver.

Funded-by: https://www.kickstarter.com/projects/1327597961/better-support-for-mt7620a-n-in-openwrt-lede/

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-02-08 22:21:26 +01:00
Álvaro Fernández Rojas 48b71a0b07 brcm2708: bcm2708: fix build
buildbot fails to build without regmap, which I couldn't reproduce locally.
Hopefully this fixes it.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 17:43:40 +01:00
Felix Fietkau 412cf4cc51 sdk: add missing change from r3328-f55c29e4c7
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-08 12:01:59 +01:00
Hans Dedecker b516b38f2f odhcp6c: update to GIT head version
cfd986c odhcp6c: fix possible stack corruption when parsing proc if_inet6

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-02-08 11:12:39 +01:00
Álvaro Fernández Rojas ba9dbc3dd5 brcm2708: add more patches for linux 4.9
Also removes unneeded wireless patches

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 09:59:53 +01:00
Álvaro Fernández Rojas 7ef713c9c4 brcm2708: bcm2710: add 64 bit support for Raspberry Pi 3
64 bit support for Raspberry Pi 3 is experimental. However, bcm2709 subtarget
should serve as a stable and compatible 32 bit support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 00:41:51 +01:00
Álvaro Fernández Rojas 77a00027c3 brcm2708: bcm2709: add support for Raspberry Pi 3
This adds support for Raspberry Pi 3 on the bcm2709 subtarget, in order to
keep 32 bit image support when 64 bit support is added on bcm2710 subtarget.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 00:41:48 +01:00
Álvaro Fernández Rojas de1f83097a generic: add missing symbols for linux 4.9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 00:41:09 +01:00
Álvaro Fernández Rojas fd94fa61a7 mac80211: brcmfmac: update Raspberry Pi patches for linux 4.9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:16:26 +01:00
Álvaro Fernández Rojas e9e52761d3 brcm2708: remove duplicated gzip from image generation
Images are now automatically gziped so remove custom image command

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:24 +01:00
Álvaro Fernández Rojas d9d090e520 brcm2708: remove linux 4.4 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:21 +01:00
Álvaro Fernández Rojas ada91d8a24 brcm2708: switch to linux 4.9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:18 +01:00
Álvaro Fernández Rojas 96aa0c6b0b brcm2708: add linux 4.9 support
Patches from Raspberry Pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.9.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:16 +01:00