Commit Graph

1045 Commits (604a3e5134a57dcbdb435d8083b612f2382c0257)

Author SHA1 Message Date
John Crispin bbfb3baaed ramips: add missing rt3352 usb phy node to dts
Signed-off-by: michael <igvtee@gmail.com>

SVN-Revision: 41476
2014-07-02 16:37:30 +00:00
John Crispin 62287e589d ramips: fix target rt5350 only have 28 gpios
Signed-off-by: michael <igvtee@gmail.com>

SVN-Revision: 41475
2014-07-02 16:37:26 +00:00
John Crispin 80e3282739 ralink: make xhci platform depend on mt7621
this broke CONFIG_ALL builds for mt7620

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41471
2014-07-02 14:32:43 +00:00
John Crispin 3d81a4ef82 ralink: add Wansview NCS601W IP Camera
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41453
2014-07-02 07:42:44 +00:00
John Crispin c749b310ed ralink: register wifi firmware for WRTnode
After r41444 wifi working on WRTnode. Tested.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41452
2014-07-01 18:17:55 +00:00
John Crispin 9c84f72f85 ramips: set default vid of each vlan, so it won't need be set explicitly.
Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>

SVN-Revision: 41448
2014-07-01 13:18:27 +00:00
John Crispin 4ddc0f9ff3 ramips: add WHR-1166 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41447
2014-07-01 10:26:42 +00:00
John Crispin 3c88de0d47 ramips: sync the WHR-600D flash layout with that of the vendor FW
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41446
2014-07-01 10:26:38 +00:00
John Crispin 2e8c6e4128 ramips: add wmac to mt7620a device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41445
2014-07-01 10:26:33 +00:00
John Crispin 5f6e7e1f44 ramips: add wmac to mt7620n device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41444
2014-07-01 10:26:30 +00:00
John Crispin bbd8f9c96a ramips: enable wmac clock for mt7620
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41443
2014-07-01 10:26:25 +00:00
John Crispin 22c4f2475b ralink: refresh kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41353
2014-06-26 13:47:50 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
John Crispin 975728813a ralink: fix up WRTNode vs WRTNODE in the dts file
https://dev.openwrt.org/ticket/16899

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41343
2014-06-26 11:43:26 +00:00
John Crispin 021e728962 ralink: Update MT7530 switch driver.
- Support set VLAN ID of each vlan.
- Support untag feature.
- Replace register address with C MACRO.
- There are 8 ports for MT7530 actually.

Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>

SVN-Revision: 41331
2014-06-24 18:14:14 +00:00
John Crispin 9284956ad8 ramips: cleanup some rt305x profiles
move both asus boards to asus.mk
rename HW5503G profile to HW550-3G to match name in image/Makefile
(fixes #16599)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41271
2014-06-19 14:13:07 +00:00
John Crispin dc5fe5f73f ramips: RT-N56U support fixes and factory image creation
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>

SVN-Revision: 41224
2014-06-16 18:57:20 +00:00
John Crispin 4d7ed2a8a0 ramips: fixes XDXRN502J reset button
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41217
2014-06-16 18:54:53 +00:00
John Crispin 2fe435081d ramips: add vlan configuration for asiarf awm002-evb
Without this, the ports all end up on vlan 1.  This enables a separate
WAN port that works.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41216
2014-06-16 18:54:48 +00:00
John Crispin ab390d6c05 ramips: restore AWM002-EVB profile in asiarf.mk
In a recent revision (r41177) John Crispin removed the profile for the
AsiaRF AWM002 eval board while adding another AsiaRF board.  This
patch restores AWM002 and also corrects a misspelling and an
apparently errant reference to an Allnet ALL0239-3G device.

Signed-off-by: Galen Seitz <galens@seitzassoc.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41215
2014-06-16 18:54:42 +00:00
John Crispin 6d213a644d ramips: add asiarf awapn2403 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41177
2014-06-13 09:16:15 +00:00
Felix Fietkau 231f15c9db ramips: fix rt2x00 handling of default packages for subtargets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41145
2014-06-11 17:01:19 +00:00
John Crispin 3306a4f9ab ralink: fix asiarf/awm002 switch setup
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40939
2014-06-02 12:44:57 +00:00
John Crispin 7437d84814 ralink: add seama image can be upgrade by sysupgrade
generate sysupgrade image by combine two images.
one is kernel image with seama header.
another is root fs image.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40922
2014-06-02 12:43:49 +00:00
John Crispin f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
John Crispin 712dec1027 ramips: add missing profile for DIR-615-D
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40911
2014-06-02 12:43:07 +00:00
John Crispin 9b728bebfb ramips: fix not set lan/wan mac address
The first switch case is default case. Then it will only
match default case. cause not update the lan/wan mac address.
And in the default switch case the param lan_mac is empty.
it will case error message 'arithmetic syntax error' when
call macaddr_add function.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40910
2014-06-02 12:43:04 +00:00
John Crispin 813a7c3827 ralink: Add support for samsung cy-swr1100 wireless router
It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40908
2014-06-02 12:42:52 +00:00
John Crispin efd09832fe ramips: Support for Teltonika RUT5XX
Hi Hartmut,

Thanks for your feedback, I have reformated the patch accordingly.

Added support for Teltonika RUT5XX hardware.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>

SVN-Revision: 40907
2014-06-02 12:42:48 +00:00
John Crispin 583b908bc7 ralink: Enable Asus RT-N10+ in menuconfig targets
This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk).
Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org>

SVN-Revision: 40903
2014-06-02 12:41:45 +00:00
John Crispin 4a7a0d2536 ralink: add dir-645 to the eeprom hotplug script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40561
2014-04-23 07:52:56 +00:00
John Crispin 720a0a1df1 ramips: register clock device for the WMAC on RT3883
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40557
2014-04-23 07:51:57 +00:00
John Crispin cd5f3584e2 ramips: Add support for the 7Links PX-4885 wireless router.
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>

SVN-Revision: 40554
2014-04-22 08:08:51 +00:00
John Crispin 284ada8a3e ramips: build factory-compatible image for AR725W
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40552
2014-04-22 08:08:42 +00:00
John Crispin cb91087991 ramips: add Airlink101 AR725W userland support
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40550
2014-04-22 08:08:35 +00:00
John Crispin 2b2d274bfa ramips: Add Airlink101 AR725W board support
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40549
2014-04-22 08:08:31 +00:00
John Crispin 010dcd092f ralink: add port_init for rt2880
Forgotten patch to fix ethernet for rt2880.
Based on previously submitted patch from Claudio.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40504
2014-04-13 18:01:08 +00:00
John Crispin 7ae1d573ae Fix Asus rt-n15 board support
* gpio leds and buttons
* ethernet

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40494
2014-04-12 21:22:04 +00:00
John Crispin 3d6ba83fe4 rt2880 DT fixes
* add pinctrl
* fix ethernet port
* make wifi available by default

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40493
2014-04-12 21:22:00 +00:00
John Crispin fa86c30538 Fix pinmux-rt2880
The last arg to FUNC() is count, not last pin.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40492
2014-04-12 21:21:56 +00:00
John Crispin 73160c1ad6 Add wmac clock for rt2880
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40491
2014-04-12 21:21:53 +00:00
John Crispin 72803e0e27 Don't try to generate whr-g300n image if it's going to be more than 4M
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40489
2014-04-12 21:21:44 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
John Crispin f1e31f8266 ralink: fix WHR-300HP2 mtd size
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40419
2014-04-07 15:10:26 +00:00
Felix Fietkau 8f41856f1f ramips: fix regression from r39949 (#15382)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40391
2014-04-06 00:09:50 +00:00
John Crispin 5b6ceab69b ralink: fix chuncked-io module
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40342
2014-03-30 19:03:55 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
John Crispin 4835ea949f ralink: add missing OF node
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39950
2014-03-18 19:22:13 +00:00
John Crispin 332b94fbd5 ralink: refresh patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39949
2014-03-18 19:21:56 +00:00
John Crispin 375e02ac3d ralink: add missing clk_set_rate()
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39896
2014-03-12 19:33:01 +00:00
John Crispin 96fa58bafd ralink: add support for wrtnode
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39786
2014-03-07 09:54:59 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
John Crispin b56bef28d7 ralink: add support for na930
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39611
2014-02-18 13:33:25 +00:00
John Crispin 55383946dc ralink: add gpio_uartf mux group
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39610
2014-02-18 13:33:20 +00:00
John Crispin 363512b8c6 ralink: fix the gpio mode mapping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39609
2014-02-18 13:33:16 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
John Crispin ebaa3817a7 ralink: activate xhci config
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39330
2014-01-19 17:27:31 +00:00
John Crispin a818a3cf8f ralink: backport various fixes from linux-mti
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39329
2014-01-19 17:27:22 +00:00
John Crispin a75b692557 ralink: add xhci driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39328
2014-01-19 17:27:13 +00:00
John Crispin f3a243c3dd ramips: Add profile for the Edimax BR-6475nD
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39299
2014-01-15 18:29:51 +00:00
John Crispin beb29461ff ramips: Add userspace support for the Edimax BR-6475nD
The rt2x00 wifi driver may still need updating to
function with this device.

Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39298
2014-01-15 18:29:44 +00:00
John Crispin 62dd252b86 ramips: rt3883: Fix a typo in rt3883.dtsi
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39297
2014-01-15 18:29:03 +00:00
John Crispin 9821ce8ed6 ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39248
2014-01-12 17:26:24 +00:00
John Crispin 03ef20ce6f ralink: fix eeprom loading
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39245
2014-01-12 14:03:15 +00:00
John Crispin 4282d796ea ralink: fix WHR-600D and WHR-300HP image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39241
2014-01-12 12:12:58 +00:00
John Crispin a7f53759f5 ralink: fix WHR-600D pcie support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39240
2014-01-12 12:12:53 +00:00
John Crispin 3a64ddd0a1 ralink: add HLK-RM04 support
https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39237
2014-01-12 12:07:40 +00:00
John Crispin aa2be01076 ralink: switch to askconsole
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39236
2014-01-12 12:07:34 +00:00
John Crispin 665c51935e ralink: fix uartf memory range size
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39235
2014-01-12 12:07:30 +00:00
John Crispin 6278a892d8 ralink: honour memory@0 node
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39234
2014-01-12 12:07:26 +00:00
John Crispin 0ac291d073 ralink: fix rt5350 ethernet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39233
2014-01-12 12:07:20 +00:00
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
John Crispin 9715b61b3c ralink: fix tso regression in the ethernet driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39168
2013-12-27 21:14:49 +00:00
John Crispin 9739a0b41b ramips: add support for RT-N14U (mt7620n based) board
added dts file and userspace scripts modified to support Asus RT-N14U board

current support status:
usb        works
ethernet   works
buttons    reset, wps
leds       asus:blue:[usb|lan|wan|air|power]
i2c        not tested
uart       not tested
wifi       not yet

Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>

SVN-Revision: 39163
2013-12-25 17:04:50 +00:00
John Crispin 93d8dc870e ramips: add gpio pin 72 in mt7620 chips to dtsi files
describes register set to control last gpio pin on mt7620 platfrom

Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>

SVN-Revision: 39162
2013-12-25 17:04:34 +00:00
John Crispin 6218da5a41 ralink: fix dir810 networking
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39093
2013-12-16 10:16:33 +00:00
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
John Crispin b4b0a55aab ralink: add mt7621 support
there are still various missing pieces for full support.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39040
2013-12-13 10:53:34 +00:00
John Crispin 0ef939c93b ralink: add TSO
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39019
2013-12-09 17:29:29 +00:00
John Crispin 09a933ed73 ralink: fix typo in gpio irq handling
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39018
2013-12-09 17:29:24 +00:00
John Crispin a65c9e5b20 ralink: add mt7620a gdma info to dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39017
2013-12-09 17:29:19 +00:00
John Crispin d203784841 ralink: add asoc modules
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39016
2013-12-09 17:29:14 +00:00
John Crispin be10895651 ralink: add partially working asoc driver. codec is not fully functional yet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39015
2013-12-09 17:29:08 +00:00
John Crispin 231eca9375 ralink: add helper that identifies the mt7620 ECO
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39014
2013-12-09 17:29:03 +00:00
John Crispin 833943b410 ralink: add dma engine support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39013
2013-12-09 17:28:43 +00:00
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
John Crispin 2370126b9b ramips: Fix initial network configuration for few boards
Argus ATP52B:      ethernet didn't work because of unconfigured switch
Sparklan WCR150GN: add switch config and make single port to be LAN
Dlink DIR-645:     seems to be a redundant case

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38960
2013-11-30 08:36:56 +00:00
John Crispin f8fe6a090a ramips: Fix dts typos
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38959
2013-11-30 08:36:47 +00:00
John Crispin bb2b428a5c ralink: dts fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38917
2013-11-26 09:51:57 +00:00
John Crispin 6295f38c8f ralink: add mac address detection for Asus RT-G32 b1
http://patchwork.openwrt.org/patch/4463/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38910
2013-11-25 14:09:08 +00:00
John Crispin 93e9a71538 base-files: allow users to delect debug level during boot
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38909
2013-11-25 08:34:55 +00:00
John Crispin 8ee2b91ddd ralink: fix up the mt7530 driver to work properly with gmac2
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38905
2013-11-25 08:34:23 +00:00
John Crispin d84238ad26 ralink: add LRO support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38904
2013-11-25 08:34:12 +00:00
John Crispin f732ed4500 ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X family
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38903
2013-11-25 08:34:01 +00:00
John Crispin 5b437e204f ralink: set the mac addr via the dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38902
2013-11-25 08:33:42 +00:00
John Crispin d175740783 ralink: set wmr-300 mac properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38872
2013-11-19 21:13:24 +00:00
John Crispin 40109bb89b ralink: add missing CONFIG_ symbol to mt7620n
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38867
2013-11-19 16:33:43 +00:00
John Crispin 82e6242798 ralink: add support for ralink mt7620 nand eval board
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38848
2013-11-18 09:35:41 +00:00
John Crispin a17e5159ac ralink: improve mt7620n detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38847
2013-11-18 09:35:32 +00:00
John Crispin f307b35c8b ralink: add mt7620 nand driver
This is a minor rework of the SDK driver. This driver needs a full rewrite.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38846
2013-11-18 09:35:23 +00:00
John Crispin 9d4eb0ac91 ralink: make all none 3x5x boards default to a vlan1/2 setup
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38845
2013-11-18 09:35:14 +00:00
John Crispin 3d547b740a ralink: make usb work on the mt7530 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38844
2013-11-18 09:34:46 +00:00
John Crispin 269cbfa06a ralink: add mt7620n dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38829
2013-11-17 13:22:01 +00:00
John Crispin 5c2e867460 ramips: fix wmr300 network detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38828
2013-11-17 13:14:46 +00:00
John Crispin dce9b292bf ralink: add mt7620n support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38823
2013-11-16 20:28:52 +00:00
Felix Fietkau 9aca892304 ramips: use dd bs=4096k instead of bs=4M to make it more portable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38806
2013-11-14 19:16:04 +00:00
Felix Fietkau 682e134b02 ramips: select kmod-rt2800-soc by default (if available)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38784
2013-11-13 10:29:10 +00:00
John Crispin 191af20982 ramips: use gpio-button-hotplug in favour of the input variant
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38735
2013-11-11 13:40:20 +00:00
John Crispin 33111eff95 ramips: make the rfkill switch work on fonera20n
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38734
2013-11-11 13:40:17 +00:00
John Crispin 3de4bdc36f ralink: revert 38348 as it breaks network on the hame-mpr
https://dev.openwrt.org/changeset/38348
https://dev.openwrt.org/ticket/14403#comment:1

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38669
2013-11-07 12:45:52 +00:00
John Crispin 4bb29e9df6 ralink: fix c&p error in gpio driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38668
2013-11-07 12:45:48 +00:00
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Gabor Juhos 379b509362 ramips: enable building of TEW-692GR images
The TEW-692GR images are missing since r36169. Uncomment
the board specific macro in image/Makefile, in order to
generate those again.

Only build tested. No idea if the the image works or not,
I have bricked my TEW-692GR a few months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38603
2013-10-30 07:06:24 +00:00
Gabor Juhos dfd4311355 ramips: fix number of GPIOs for RT3352
The RT3352 SoC only supports 46 GPIO lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38602
2013-10-30 07:06:23 +00:00
Gabor Juhos 9186fb342e ramips: remove trailing whitespaces from .dts{,i} files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38601
2013-10-30 07:06:22 +00:00
John Crispin 176b41d441 ralink: add package for mt7620 sdhci
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38553
2013-10-28 06:47:56 +00:00
John Crispin 36e029b3eb ralink: dont include mt7620 sdhci support inside the kernel
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38552
2013-10-28 06:47:48 +00:00
John Crispin 7c7225a19d ralink: add support for missing mt7620 mux values
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38551
2013-10-28 06:47:39 +00:00
John Crispin 43de7c1cfa ralink: add support for 2 new mt7620 boards made by buffalo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38550
2013-10-28 06:47:31 +00:00
John Crispin 849f74f930 ralink: pinctrl fix for non muxed pins
Pins with no mux option failed to be recognized as gpios.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38540
2013-10-26 12:24:55 +00:00
Gabor Juhos b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
John Crispin 9a97c56535 ralink: fix default vlan mapping for MT7620a_MT7610e
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38418
2013-10-15 14:56:49 +00:00
Hauke Mehrtens 81e2f00367 kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
John Crispin b93e5498ae ralink: fixes mpr a1/a2 network setup
Signed-off-by: Suschman <suschman@gmx.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38348
2013-10-09 10:08:52 +00:00
John Crispin e382d2c7e6 ralink: add support for the mt7530 eval board
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38345
2013-10-08 21:10:15 +00:00
John Crispin 697bb191b0 ralink: add missing header file to mt7530 driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38344
2013-10-08 21:10:00 +00:00
John Crispin c903de043e ralink: fix asiarf image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38324
2013-10-07 15:02:44 +00:00
John Crispin ddcb800018 ralink: split mt7530 driver out of the gsw driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38323
2013-10-07 15:02:39 +00:00
John Crispin c077698e38 ralink: build recovery images for dcs930 ip cam
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38322
2013-10-07 15:02:35 +00:00
John Crispin 420c62205b ralink: DIR610A1 Fix remaining issues
This patch fixes:

 - Ethernet and Wireless LEDs
 - Wireless MAC Address
 - Remove whitespaces from dts file

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 38321
2013-10-07 15:02:31 +00:00
John Crispin 5eacfc1c60 ralink: MT7620 eval board pinmux fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38320
2013-10-07 15:02:27 +00:00
John Crispin cc58dd26d3 ralink: make cevt systick selectable via kconfig
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38319
2013-10-07 15:02:23 +00:00
John Crispin baf9d53792 ralink: fix mt7620a pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38318
2013-10-07 15:02:18 +00:00
John Crispin 65bb48cf23 ralink: dts fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38265
2013-09-30 20:48:39 +00:00
John Crispin 52fe1211b3 ralink: fix DIR-320-B1 board detection
https://dev.openwrt.org/ticket/14226

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38264
2013-09-30 20:48:34 +00:00
John Crispin 396cb4f405 ralink: Change size of image for DIR-320 B1 to 8MB
http://patchwork.openwrt.org/patch/4102/

Signed-off-by: Vladimir Stolyarov <xakep6666@yandex.ru>

SVN-Revision: 38263
2013-09-30 20:48:27 +00:00
Gabor Juhos 9c8a5ef115 kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
Felix Fietkau a30681dff0 build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
Gabor Juhos 0380904acb kernel/3.10: refresh all target patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
Gabor Juhos 76a1617063 ramips: sync 3.10 configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38181
2013-09-25 16:39:23 +00:00
John Crispin 08abb8822b ralink: make dcs930 uvc camera work
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38054
2013-09-19 05:57:00 +00:00
John Crispin c0f6bf05f4 ralink: add support for dalink dcs930l ipcam
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38053
2013-09-19 05:56:46 +00:00
John Crispin 898c164b46 ralink: add back dwc_otg driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38052
2013-09-19 05:56:31 +00:00
John Crispin 5722b32acf ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350
https://dev.openwrt.org/ticket/14129

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38040
2013-09-18 16:31:37 +00:00
John Crispin 8cd1c99707 ralink: add pinctrl driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38026
2013-09-17 21:45:44 +00:00
John Crispin 66bed0b019 ralink: change subtarget order
this will make image builder build rt305x targets per default

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38025
2013-09-17 21:45:39 +00:00
Gabor Juhos a0d6cd4f49 kernel/3.10: add new Kconfig option for firmware partition split
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38002
2013-09-15 17:03:29 +00:00
Gabor Juhos 554772a665 kernel: update 3.10 to 3.10.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38000
2013-09-15 16:00:41 +00:00
Gabor Juhos d120ec18b2 kernel: update 3.10 to 3.10.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37890
2013-09-02 19:12:54 +00:00
Gabor Juhos 043edd8074 kernel: update 3.10 to 3.10.9
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37832
2013-08-23 17:31:04 +00:00