Commit Graph

7132 Commits (5fa4348a70de98b85720db9789f15ee0b8c2307a)

Author SHA1 Message Date
Gabor Juhos ee8077f0fe ramips: Support for NexAira BC2
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
Gabor Juhos 18452a753b ramips: fix switch-port assignment for HW550-3G
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28570
2011-10-24 21:49:32 +00:00
Gabor Juhos 68a01c0180 ramips: combine led setup for all boards in one file
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 28569
2011-10-24 21:49:31 +00:00
Gabor Juhos c8b9086ac5 ar71xx: build image for the Buffalo WHR-HP-G300N
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28568
2011-10-24 21:49:29 +00:00
Gabor Juhos 9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
2011-10-24 21:49:26 +00:00
Gabor Juhos 0ab6be2ba3 ar71xx: build image for the Allnet ALL0258N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28565
2011-10-24 21:49:23 +00:00
Gabor Juhos d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
2011-10-24 21:49:21 +00:00
Gabor Juhos ef41e0a61c ar71xx: don't override CONFIG_FSNOTIFY
SVN-Revision: 28563
2011-10-24 21:49:18 +00:00
Jo-Philipp Wich b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275)
SVN-Revision: 28562
2011-10-24 21:35:43 +00:00
Nicolas Thill b0d9bccafc x86: allow VDI & VMDK images for all subtargets (closes: #10255)
SVN-Revision: 28518
2011-10-22 13:09:15 +00:00
Jonas Gorski 40d088446f linux: generic: refresh patches for 3.1-rc10
Hopefully the last one and identical to final.

SVN-Revision: 28492
2011-10-20 10:32:44 +00:00
Jonas Gorski a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G
SVN-Revision: 28423
2011-10-11 23:05:16 +00:00
Jonas Gorski 03f91068d1 ar71xx: add a workaround for ar8316 not always driving the TA bit to low
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
to low despite returning a valid value. Ignore it and just use the
returned value anyway.

SVN-Revision: 28422
2011-10-11 23:05:13 +00:00
Jonas Gorski b7a2a74823 ar8216: use mdiobus_{read,write} to ensure proper locking
SVN-Revision: 28421
2011-10-11 23:05:10 +00:00
John Crispin 0a866293bd * update patches to 3.0
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)

SVN-Revision: 28405
2011-10-10 15:13:46 +00:00
Jonas Gorski c674c874b7 ag71xx: close a race between the phy state machine and link state
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
2011-10-08 11:37:14 +00:00
Jo-Philipp Wich ce5e1abbb7 add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver
SVN-Revision: 28376
2011-10-06 18:23:16 +00:00
Florian Fainelli 829ae01f16 add missing kernel config symbols
SVN-Revision: 28363
2011-10-04 09:15:37 +00:00
Daniel Dickinson b0345ef184 Was specifying input-polled-keys and not input-keys-polled as the module name. Philip Prindeville - 2011-10-03 03:58:17
SVN-Revision: 28357
2011-10-03 04:39:54 +00:00
Daniel Dickinson c0a625ffbf Add patch for linux-3.0 as well.
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

SVN-Revision: 28356
2011-10-03 03:09:20 +00:00
Daniel Dickinson 7e372b6dcf New x86 platform specific symbol needed for 3.1-rc3. 2011-10-03 03:06:29 +00:00
Daniel Dickinson 541aa8e38e A lot of these options get set automatically when Geode is selected.
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

SVN-Revision: 28353
2011-10-03 03:02:42 +00:00
Florian Fainelli 3802769ea1 add vlan definitions for Siemens SE505v2
Hi,

this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.

It also fixes two whitespace issues.

Tested with brcm47xx on both trunk and backfire branch and works as
expected.

Signed-off-by: Manuel Munz <freifunk@somakoma.de>

SVN-Revision: 28336
2011-09-30 12:55:33 +00:00
John Crispin aecc73de77 The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code.
SVN-Revision: 28310
2011-09-26 10:35:51 +00:00
John Crispin 1ef8066bff * remove obseleted m25p80 patch
SVN-Revision: 28309
2011-09-26 09:36:02 +00:00
John Crispin cf59e7255d * rebase 3.0 patches * fold some fixes into existing patches
SVN-Revision: 28308
2011-09-26 09:35:02 +00:00
Gabor Juhos 6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board
Patch-by: Lukas Kuna

SVN-Revision: 28295
2011-09-23 19:56:39 +00:00
Gabor Juhos e45d7d7006 ar71xx: enable login only on the system console by default
SVN-Revision: 28294
2011-09-23 19:56:38 +00:00
Alexandros C. Couloumbis 5fc14dfb87 linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure)
SVN-Revision: 28293
2011-09-23 10:00:13 +00:00
Gabor Juhos 49ac36e818 ar71xx: build images for the TP-Link TL-WR703N v1 board
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28279
2011-09-21 11:47:56 +00:00
Gabor Juhos 733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
2011-09-21 11:47:53 +00:00
Gabor Juhos d3617ac7d3 ar71xx: add AR933x specific USB setup function
SVN-Revision: 28276
2011-09-21 11:47:51 +00:00
Gabor Juhos 91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper
SVN-Revision: 28275
2011-09-21 11:47:50 +00:00
Gabor Juhos 9fa51d5c38 ar71xx: fix copy&paste bug in WZRHPAG300H profile description
SVN-Revision: 28274
2011-09-21 11:47:48 +00:00
Gabor Juhos 079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries
SVN-Revision: 28273
2011-09-21 11:47:47 +00:00
Gabor Juhos 73dac07c44 ar71xx: sort AR71XX_MACH_* entries
SVN-Revision: 28272
2011-09-21 11:47:45 +00:00
Gabor Juhos ef2431c8d9 ar71xx: create image for the TP-Link TL-WR743ND v1
Same hardware as WR741ND but with PoE support.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 28271
2011-09-21 11:47:44 +00:00
Gabor Juhos 76d0d1a837 ar71xx: create image for the TP-Link TL-WR740N v3
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

SVN-Revision: 28269
2011-09-21 11:47:40 +00:00
Gabor Juhos 93c093057d generic: jumbo frames support for rtl8366s
This patch adds the option to enable jumbo frames on the rtl8366s
switch. This is almost exactly the same as the first patch at
https://dev.openwrt.org/ticket/7977 and it has been requested
in a comment there.

I have tested this and it successfully allows devices on the switch
using jumbo frames to communicate.

Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk>

SVN-Revision: 28267
2011-09-21 11:47:38 +00:00
Felix Fietkau 1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins)
SVN-Revision: 28213
2011-09-11 17:44:12 +00:00
Jo-Philipp Wich ba46c7b3c6 Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz
SVN-Revision: 28197
2011-09-08 22:18:26 +00:00
Felix Fietkau 65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037)
SVN-Revision: 28182
2011-09-06 05:38:23 +00:00
Felix Fietkau de8cabe839 ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954)
SVN-Revision: 28173
2011-09-05 18:37:48 +00:00
Imre Kaloz ed2c8bdc92 upgrade testing kernel support to 3.1
SVN-Revision: 28165
2011-09-04 15:06:05 +00:00
Imre Kaloz 4f0b1a6602 cleanup config
SVN-Revision: 28164
2011-09-04 15:02:37 +00:00
Imre Kaloz 0569cff6e1 refresh patches
SVN-Revision: 28163
2011-09-04 15:01:56 +00:00
Imre Kaloz 6d17e13cde add missing symbols
SVN-Revision: 28162
2011-09-04 15:01:25 +00:00
Felix Fietkau 24dfe525c2 brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default
SVN-Revision: 28125
2011-08-29 21:23:51 +00:00
Felix Fietkau cd2c68501c ar71xx: fix ethernet PLL setting on ar7242
SVN-Revision: 28124
2011-08-29 21:23:46 +00:00
Hamish Guthrie cc037a5e27 Remove subpage align patch
SVN-Revision: 28086
2011-08-25 11:49:55 +00:00