9c1ed6447b
odhcp6c: Make SLAAC-only work without reqprefix=no
...
Previously if the upstream router did not provide any DHCPv6-service
the wan6 interface would not come up even if RAs were received. The new
behavior allows the wan6 interface to comeup with RA-only configuration
after a timeout of 10s.
SVN-Revision: 36555
2013-05-06 10:20:43 +00:00
95e139d0b2
ipset-dns: support simultaneously populating IPv4 and IPv6 sets
...
SVN-Revision: 36554
2013-05-06 10:01:45 +00:00
026271d03c
base-files: change network_find_wan() procedure to ignore default gateways in different routing tables
...
SVN-Revision: 36553
2013-05-06 09:33:56 +00:00
3c17fd41a4
Add ipset-dns - a tiny DNS proxy service which puts resolved ip addresses into a specified ipset
...
SVN-Revision: 36552
2013-05-06 08:44:54 +00:00
b693bfc710
mkimage: update to 2013.04
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36550
2013-05-05 20:11:04 +00:00
c7c243669c
sysupgrade: fixes broken pipe error during sysupgade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36548
2013-05-05 12:41:42 +00:00
6b4f3344df
toolchain/gcc: add support for 4.8-linaro
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36545
2013-05-04 13:37:41 +00:00
f8d8aadb42
toolchain/gcc: forward port missing patches to gcc 4.8.0
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36544
2013-05-04 13:37:37 +00:00
1c89a60431
ramips: unbreak gpio handling for uart mux group
...
this should fix the handling of corner cases
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36543
2013-05-04 11:36:51 +00:00
bb429757c8
at91: build .dtb file for the CalAmp LMU500 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36542
2013-05-03 19:01:00 +00:00
ccf95fe938
ar71xx: Fix AP135 PCI
...
AP135 has a pluggable PCIE slot unlike AP136.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36541
2013-05-03 19:00:58 +00:00
826b4e36c4
kernel: add veth module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36540
2013-05-03 15:16:50 +00:00
f54a6df1e1
Config.in: update options for cgroups and namespaces
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36539
2013-05-03 15:16:49 +00:00
02d4ea2774
Config.in: fix formating
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36538
2013-05-03 15:16:48 +00:00
b85c442e81
hostapd: enable 802.11r for the -full variant ( #13250 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36533
2013-05-03 10:39:57 +00:00
1b52dacef0
mac80211: merge a client mode channel switch handling fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36531
2013-05-03 09:14:03 +00:00
18c588a570
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530
2013-05-03 09:12:19 +00:00
30c4360345
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36529
2013-05-02 15:59:57 +00:00
24636fcabf
bcm63xx: split into two subtargets, generic and SMP
...
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527
2013-05-02 15:28:31 +00:00
d11efa1428
bcm63xx: add SMP support for BCM6362 and BCM6368
...
BCM6358 requires further work due to its shared TLB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526
2013-05-02 15:28:26 +00:00
8f15326acc
kernel: generic: don't strip /proc/irq on SMP
...
/proc/irq is needed for changing the SMP affinity of interrupts.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36525
2013-05-02 15:28:12 +00:00
a80a4f3ec2
bcm63xx: fix hsspi flash registration for BCM6362
...
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524
2013-05-02 15:28:10 +00:00
999a956f4c
bcm63xx: fix/enable livebox minipci
...
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523
2013-05-02 15:28:07 +00:00
f935d800bf
scripts/config: fix an option processing error that caused duplication in diffconfig.sh output ( #13384 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36522
2013-05-02 14:06:10 +00:00
4bba31b64c
firewall3: update to git head
...
- assume "tcp+udp" if no protcol is specified in rules or redirects (#13422 , #13386 )
- add support for fwmark matches and mark setting targets
SVN-Revision: 36521
2013-05-02 13:42:20 +00:00
89f9ce944f
uci: update to git head
...
- copy permission of config files to state files to allow access to state info by non root users
- properly handle empty string case when unsetting lists
SVN-Revision: 36518
2013-05-02 12:40:13 +00:00
0ed3a7b9d0
tools/mtools: disable iconv support, it breaks on some systems
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36516
2013-05-02 12:39:31 +00:00
6ac2b3b76a
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.
...
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/ .
SVN-Revision: 36513
2013-05-02 11:46:53 +00:00
7f2743d458
kernel: netfilter.mk: Explicitly set the order of autoloaded modules
...
In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.
So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 36512
2013-05-02 11:25:18 +00:00
a98cdd9892
toolchain: add missing patch to gcc v4.8.0
...
SVN-Revision: 36511
2013-05-02 11:25:13 +00:00
a0b655b8f2
Fix install of iptables pkg-config files.
...
libiptc.pc depends on libip[4|6]tc.pc, thus all of those need to be
installed.
Should fix collectd build and thus #13146 ; which should make collectd
appear in snapshots again.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36509
2013-05-02 08:10:55 +00:00
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
db02b0e4ee
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
...
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36506
2013-05-01 21:52:25 +00:00
292368409e
brcm63xx: add missing binary operands to BCM6345 ethernet patch
...
Thanks to Emilio Arias for reporting it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36505
2013-05-01 21:12:40 +00:00
6f48ccea02
brcm63xx: remove 3.7 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36504
2013-05-01 21:12:26 +00:00
292493f74d
kernel: add md5sum for 3.9 final
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36499
2013-04-30 11:29:38 +00:00
0ae43dbe9d
ar71xx: rename WNR2000v3 support patch
...
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498
2013-04-30 10:44:11 +00:00
9658206abc
firmware-utils/mktplinkfw: add description for -W option into usage output
...
Add description for -W <hwrev> option into usage output of mktplinkfw.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36497
2013-04-30 10:44:10 +00:00
d557a51a40
x86/geos: switch to 3.8.10
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36496
2013-04-30 10:44:09 +00:00
0fa71ca3e5
linux/3.9: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36495
2013-04-30 10:44:08 +00:00
41445b41cc
linux/3.8: use backported pcibios_get_phb_of_node patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36494
2013-04-30 10:44:07 +00:00
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
8e466dcdf4
at91: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36492
2013-04-30 10:43:58 +00:00
d35545f3d7
linux/3.{8,9}: add missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36491
2013-04-30 10:43:57 +00:00
25c45c0d53
linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
...
It is forced to 'y' since r36342.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36490
2013-04-30 10:43:56 +00:00
eff12a630d
ramips: move dlink profile to correct sub folder - 2nd try
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36489
2013-04-30 10:34:20 +00:00
1db4587bc7
ramips: move dlink profile to correct sub folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36487
2013-04-30 08:24:26 +00:00
73b7c776e9
toolchain: gcc: backport fixes for gcc bug 54295
...
Fix "Widening multiply-accumulate operation uses wrong value extension"
for 4.7, 4.7-linaro and 4.6-linaro, which backported the broken code to 4.6.
Vanilla 4.6 is unaffected.
Fixes #13420 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36486
2013-04-29 15:40:21 +00:00
f81cd11981
move packages related to telephony into its own feed
...
remove telephony related packages from packages.svn
and add new feed 'telephony.git' to feeds.conf.default
SVN-Revision: 36485
2013-04-29 02:17:02 +00:00
ca7f9638d5
broadcom-diag: support for the WNDR3700v3
...
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.
The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 36482
2013-04-28 21:11:17 +00:00
Steven Barth
Jo-Philipp Wich
Luka Perkov
John Crispin
Felix Fietkau
Gabor Juhos
Jonas Gorski
Florian Fainelli
Mirko Vogt
Hauke Mehrtens