954004eccc
kernel: disable INET_LRO by default
...
INET_LRO deprecated and there are exactly two drivers using it, neither
being included in any of the targets enabling INET_LRO. At the same time
both drivers needing it select it.
So just disable it for everyone.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45584
2015-04-28 13:31:08 +00:00
9feb1361c4
brcm63xx: fix bcm6348 ext irqc compatible name
...
This was a remnant of an old version.
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45583
2015-04-27 11:06:05 +00:00
5e7f4ab632
brcm63xx: fix bcm3368.dtsi typo.
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45582
2015-04-27 11:06:00 +00:00
d2e02d6377
sdk: filter out CONFIG_SIGNED_PACKAGES for generated config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45581
2015-04-25 12:39:02 +00:00
51d0476ab0
kernel: implement RENAME_EXCHANGE support for jffs2 - overlayfs requires it
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45580
2015-04-25 10:47:18 +00:00
33e597b241
bcm53xx: sort ports from NVRAM entries before matching them
...
Some devices have unsorted ports which may lead to broken config.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45575
2015-04-24 07:47:25 +00:00
00fb1bc098
netlogic: copy initramfs image to $(BIN_DIR)
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45574
2015-04-23 22:31:36 +00:00
e175b199f8
kernel: backport rest of bgmac patches to 4.0
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45573
2015-04-23 19:11:11 +00:00
6bfb1a4b11
kernel: backport few bgmac patches to 4.0
...
I still need to test following patch before backporting:
bgmac: leave interrupts disabled as long as there is work to do
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45571
2015-04-23 12:30:51 +00:00
8d1580c4bb
brcm47xx: add patches for kernel 4.0
...
SVN-Revision: 45570
2015-04-23 11:31:54 +00:00
c7d5fee204
generic/4.0: bump to final version
...
Linux 4.0 was released on 2014-04-12
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45559
2015-04-22 09:35:36 +00:00
16127b3429
brcm63xx: fix leds bcm963269bhr
...
Fix the led naming and gpios.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45558
2015-04-21 17:00:39 +00:00
5e8eedb897
brcm63xx: add missing bcm96329bhr profile and dts
...
Hopefully the last missing board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45557
2015-04-21 16:43:46 +00:00
03dd7b6bdb
ralink: the systick clocksource was calculating a bad bogo mips value
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45554
2015-04-21 12:42:42 +00:00
a34db67857
Add support for Ubiquiti Rocket M XW devices
...
This patch adds support for the XW version of the Rocket M series devices
manufactured by Ubiquiti, based on the Atheros AR9342 SoC.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 45553
2015-04-21 12:42:13 +00:00
8a777768a8
ar71xx: spi cleanup for ap121, db120, ubnt-xm and ap136
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45552
2015-04-21 12:42:05 +00:00
1200296d38
ar71xx: merge ap81 patches into one
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45551
2015-04-21 12:41:55 +00:00
23f9c83594
kernel: backport an upstream PPPoE shutdown fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45548
2015-04-21 11:24:46 +00:00
866fe3895d
bcm53xx: sysupgrade: check if new kernel fits partition size
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45547
2015-04-21 11:21:34 +00:00
457d9caf4d
bcm53xx: sysupgrade: improve NAND warnings
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45546
2015-04-21 11:04:38 +00:00
5b9d70c888
bcm53xx: image: prepare for generating serial flash images
...
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45545
2015-04-21 08:42:41 +00:00
a86e7330dc
bcm53xx: sysupgrade: drop some debugging message
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45544
2015-04-21 08:34:25 +00:00
688c1d74b9
bcm53xx: sysupgrade: allow flashing NAND devices without --force
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45543
2015-04-21 08:32:59 +00:00
d263c8e1a9
bcm53xx: sysupgrade: support flashing TRX with UBI image
...
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45542
2015-04-21 08:20:06 +00:00
92875dbd3d
bcm53xx: append only 1 block (with erasing mark) to UBI
...
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45541
2015-04-21 08:20:00 +00:00
ac6879caaa
bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades
...
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45540
2015-04-21 08:19:53 +00:00
34a82b7ef9
ar71xx: add TP-LINK TL-WR710N v2
...
TP-Link TL-WR710n v2 looks like v1, but has less memory (4MB).
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 45538
2015-04-21 07:15:55 +00:00
0ddebefc74
ipq806x: add db149 support to OpenWrt init scripts
...
DB149 is a IPQ8064 based platform. This patch adds the init scripts to
detect it, configure the network accordingly, and generate a flashable
image for it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45537
2015-04-21 07:15:47 +00:00
0fd202f3e5
ipq806x: add db149 dts files
...
DB149 is an IPQ806x based development platform. This patch adds the dts
files to support it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45536
2015-04-21 07:15:37 +00:00
be5f3b9016
ipq806x: enable AT803x driver
...
Certain IPQ806x based platforms are making use of this PHY. So we'll
enable it so it gets detected as such.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45535
2015-04-21 07:15:30 +00:00
ca7fe0d4c6
kernel: fix generic/3.18 wpan symbols
...
-removed symbol because it should be handled by wpan.mk
-add missing FAKEHARD symbol (this symbol is removed in Kernel 4.0)
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45530
2015-04-21 06:59:18 +00:00
48d81861a6
ar71xx: refresh patches
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45528
2015-04-20 20:47:53 +00:00
9d76de9771
ar71xx: add support for compex wpj344
...
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45527
2015-04-20 20:47:48 +00:00
0a4b20166d
ar71xx: Increase RXD/RDV to 2 on OM5P-AN
...
It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV
but 2. These was found when testing with a NetGear GS752TP POE switch with a
cable length of 50ft and 250ft.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45524
2015-04-20 15:01:00 +00:00
f4e6418a32
ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x
...
The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared
by the function ath79_setup_ar934x_eth_cfg. Clearing these in the
ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they
rely on the preset value by the bootloader.
Instead another function is introduced which also works on ETH_CFG on AR934x.
It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on
machines which require special settings.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45523
2015-04-20 15:00:52 +00:00
c75a0e86b1
ar71xx: add mask and shift for RXD/RDV bits in AR934X register file
...
The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X
register file") introduced definitions for some bits in the RDV/RXD part of the
ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is
specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit
only specified the lower bits. The upper bits also have to be unset when the
lower bits should only be set.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45522
2015-04-20 15:00:41 +00:00
5c6925a23b
ar71xx: Remove TX/RX delay from pll_1000 for OM5P-AN
...
The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the
enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY.
Othwise the throughput in gigabit mode is heavily reduced.
Signed-off-by: Sven Eckelmann <sven@open-mesh.org>
SVN-Revision: 45521
2015-04-20 15:00:20 +00:00
0ee9504911
all: replace genext2fs with make_ext4fs
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45517
2015-04-20 13:57:43 +00:00
610ce30c3a
Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)
...
Profile definitions need to be checked and fixed before this patch can
be applied again.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45511
2015-04-19 19:19:12 +00:00
d808d9be86
ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45507
2015-04-19 16:31:54 +00:00
0dfba24e9a
kernel: refresh generic patches
...
Refresh patches to remove the trailing whitespaces caused by an old
diffutils version on osx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45506
2015-04-19 11:38:46 +00:00
681eb8c3de
brcm63xx: fix bcm63268 rgmii port rgmii configuration
...
This should rather be done by passing appropriate platform_data/OF, but
should suffice for now.
Fixes e.g. GbE ports on BCM963268BU_P300.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45505
2015-04-19 11:38:42 +00:00
440124dcbb
brcm63xx: allow using all four rgmii ports on bcm6316x
...
At least the third rgmii port is available on 63169, so assume all are
available. Simplifies cpu vs. variant handling.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45504
2015-04-19 11:38:24 +00:00
c1ea714d43
brcm63xx: BCM963268BU_P300 reference board fixes
...
- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45499
2015-04-18 22:33:50 +00:00
d9ebcce56c
ar71xx/image: remove duplicated rootfs in new tplink initramfs images
...
The new building code included the rootfs twice when building tplink initramfs images.
To make it more readable move initramfs into an own build step
Build/mktplinkfw-initramfs.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45491
2015-04-18 10:19:28 +00:00
09c4b0e8f3
ar71xx/image: move TPLINK-LZMA image to new build code
...
There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45490
2015-04-18 10:19:23 +00:00
13204f6a35
ar71xx/image: add template tplink-16mlzma
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45489
2015-04-18 10:19:14 +00:00
1efdccc055
ar71xx/image: fix imagesize of template tplink-8mlzma
...
The new image size is verified by a running tplink device and checked
against mktplinkfw source code.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45488
2015-04-18 10:19:09 +00:00
6232e845da
brcm63xx: fix bcm96318ref_p300 profile name
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45486
2015-04-18 09:34:17 +00:00
c73adc80a3
bcm53xx: add profiling support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45480
2015-04-17 18:52:15 +00:00
22045c383d
imx6: put uboot-envtools in DEFAULT_PACKAGES
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45478
2015-04-17 13:47:13 +00:00
cc8628a6a3
kirkwood: put uboot-envtools in DEFAULT_PACKAGES
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45477
2015-04-17 13:47:09 +00:00
9c02b23a77
brcm47xx: add buttons support for WRT310N v2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45474
2015-04-17 08:12:00 +00:00
9e03c36259
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45473
2015-04-17 06:03:00 +00:00
b12e85a451
brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45472
2015-04-17 05:45:46 +00:00
e85294a957
brcm47xx: rework vendor fw handling to don't duplicate upgrade calls
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45470
2015-04-16 21:43:27 +00:00
c8eed9a50a
brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
...
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected. The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2. Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45469
2015-04-16 21:20:37 +00:00
582b20c4e2
kernel: accidentally committed a few patches in the wrong place, move them
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468
2015-04-16 20:43:11 +00:00
b860db2c63
bcm53xx: add power button for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467
2015-04-16 20:09:55 +00:00
c9aeb21405
bcm53xx: add power button for Buffalo WZR-1750DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45466
2015-04-16 20:09:48 +00:00
a7f768bdc8
bcm53xx: add USB LED for Buffalo WZR-1750DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45465
2015-04-16 20:09:42 +00:00
f6cbbe1332
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45464
2015-04-16 20:09:36 +00:00
d51420eedc
bcm53xx: increate trx maxlen to prevent build failures with bigger images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45461
2015-04-16 20:09:15 +00:00
f8d499fd3f
bcm53xx: fix WXR-1900DHP power led name and add usb led
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45460
2015-04-16 20:09:08 +00:00
76330e9b57
mvebu: better integrate xp-gp
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45459
2015-04-16 13:53:57 +00:00
c64fdadea7
bcm53xx: make use of the new board detection layer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45458
2015-04-16 12:18:34 +00:00
2705cda813
mvebu: add support for the Linksys Caiman and Cobra
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
0926e4c22f
mvebu: bring back CONFIG_CPU_THERMAL
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45455
2015-04-16 00:23:34 +00:00
a635c0a04e
mvebu: refresh kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45454
2015-04-16 00:10:42 +00:00
dade4535bb
mvebu: fix typo in marvell profile
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45453
2015-04-15 16:23:20 +00:00
a046ce235f
mvebu: better integrate 385-ap-db
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45452
2015-04-15 16:23:10 +00:00
147e005fcf
bcm53xx: add USB 2.0 power control for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45451
2015-04-15 16:06:20 +00:00
83e31eb7e7
bcm53xx: add USB 2.0 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
3edb55143d
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45445
2015-04-14 20:50:59 +00:00
3cb8bf44e6
otrx: change command line API to start with a mode
...
This will allow adding more modes without options conflict.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
911cf6da60
ar71xx: Enable AT803X_PHY to set special flags
...
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45439
2015-04-14 19:00:57 +00:00
efbdc168ff
ar71xx: fix ethernet packet loss issues on OM5P-AN
...
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.
The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45438
2015-04-14 19:00:51 +00:00
5c9c670616
kernel: update bgmac patches to the latest version submitted
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45431
2015-04-14 12:17:20 +00:00
923bef1678
bcm53xx: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426
2015-04-13 22:23:37 +00:00
d0ba3bb1e2
kernel: finally remove layer7 filter support
...
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423
2015-04-13 22:23:14 +00:00
87f854059a
kernel: fix more bgmac dma init/cleanup issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45422
2015-04-13 20:08:30 +00:00
232c61742e
mvebu: copy the initramfs files to the bin dir
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45421
2015-04-13 20:06:47 +00:00
1bf8e555bb
kernel: sync bgmac changes with latest upstream submission
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45420
2015-04-13 17:32:33 +00:00
24e9f52106
bcm53xx: add support for the Buffalo WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419
2015-04-13 17:32:25 +00:00
1e48a48915
bcm53xx: fix GPIO pins > 16
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418
2015-04-13 17:32:18 +00:00
6bc743ef6f
kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45417
2015-04-13 17:32:12 +00:00
1f70f452cc
bcm53xx: add missing l2 cache controller AUXCTL bit
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416
2015-04-13 17:32:05 +00:00
8c684f42e5
mvebu: add support for the in-CPU RTC on the Armada 38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45415
2015-04-13 13:06:34 +00:00
c9e6c7c836
mvebu: add comments to image generation
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45414
2015-04-13 12:15:40 +00:00
e3bd4f0969
mvebu: stop legacy image generation
...
If you can't find the firmware for you board, send proper patches.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45413
2015-04-13 12:08:42 +00:00
96c793f529
mvebu: generate a single firmware for the 385-db-ap
...
This has been done without having a board, but should work.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45412
2015-04-13 12:06:56 +00:00
4da8f96754
mvebu: reflect Armada 38x support in the name
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45411
2015-04-13 11:30:39 +00:00
d24388da44
bcm53xx: add a comment about the gpio base patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45408
2015-04-12 22:10:44 +00:00
afafbc0d74
kernel: bgmac: add more DMA related fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45407
2015-04-12 22:10:40 +00:00
09722d0bdc
ppc40x: upgrade to 3.18
...
left "broken" as I'm not sure if my only board is to blame.. testers welcomed
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45406
2015-04-12 20:48:13 +00:00
e55532b7af
orion: upgrade to 3.18 (compile tested only)
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45405
2015-04-12 20:45:55 +00:00
77c75e6fa3
bcm53xx: try to handle Netgear R8000 VLANs config
...
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45403
2015-04-12 20:11:25 +00:00
06ac2f5c74
b53: improve overriding CPU port state on BCM5301X
...
On BCM5301X there are two different cases to handle: CPU port 8 vs. any
other one. Support for CPU port 8 was already partially implemented but
it lacked setting some extra bit for 2G speed. It also will need to be
extended to implement "SMP dual core 3 GMAC setup". That's the reason
for handling it in separated code block.
This patch also adds overriding CPU port state for port other than 8. It
requires using recently defined GMII_PORT registers.
It was tested for regressions on BCM53011 revs 2 & 3. It was also
confirmed to fix switch on some internal Broadcom board.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45402
2015-04-12 20:00:42 +00:00
ceb7321e13
mvebu: refresh patches
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45401
2015-04-12 17:30:41 +00:00
b0ad24f0d5
mvebu: migrate mamba support to the upstreamed code
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45400
2015-04-12 17:29:50 +00:00
2dbe131a62
bcm53xx: fix bcma gpio chip base
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45399
2015-04-12 17:22:04 +00:00
808fb7a0bd
kernel: add missing memory barrier to bgmac
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45398
2015-04-12 16:39:24 +00:00
6f01238398
mvebu: handle other SKUs as well
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45396
2015-04-12 15:04:14 +00:00
d1bedfbdf5
mvebu: include the ahci driver in the default profile
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45395
2015-04-12 15:03:25 +00:00
6cfe1539da
generic: make sure we only try to mangle bootargs we do have
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45393
2015-04-12 14:46:19 +00:00
95ef64a779
bcm53xx: allow sysupgrade firmwares without UBI containing rootfs
...
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45392
2015-04-12 12:04:13 +00:00
24d40980b0
bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade
...
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45391
2015-04-12 11:46:16 +00:00
a04b71d330
bcm53xx: rework vendor fw handling to don't duplicate upgrade calls
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45389
2015-04-12 10:42:27 +00:00
8904cd1dcc
kernel: add bgmac fixes for various issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45388
2015-04-12 10:35:21 +00:00
503ccc502d
bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation
...
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45387
2015-04-12 10:20:59 +00:00
a62fa2d365
mvebu: reformat the damaged syscfg partition on the mamba
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45386
2015-04-12 08:35:33 +00:00
1a797043e5
kernel: revert section sorting change from r41951
...
It currently does not seem to make a difference anymore, except by
increasing compressed kernel image size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45385
2015-04-11 21:21:03 +00:00
bb828e30b0
imx6: add missing patches from 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45378
2015-04-11 10:46:20 +00:00
e8126cbfbd
kernel: remove kernel module checks/dependencies for 3.14
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45377
2015-04-11 10:43:46 +00:00
8865505665
generic: drop 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45375
2015-04-11 10:28:14 +00:00
b66b0ae632
brcm47xx: drop 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45374
2015-04-11 10:28:11 +00:00
fc08d7a3eb
adm8668: drop 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45373
2015-04-11 10:28:06 +00:00
b976ac8b86
mcs814x: drop 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45372
2015-04-11 10:28:03 +00:00
d21b92af8e
imx6: drop 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45371
2015-04-11 10:28:00 +00:00
912a6371f8
imx6: switch to 3.18
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45370
2015-04-11 10:27:49 +00:00
4fd21b203e
mxs: reinstate rootfs image creation and dtb copy
...
Signed-off-by: Harald Geyer <harald@ccbib.org>
Acked-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 45369
2015-04-10 21:36:33 +00:00
db4ce3d16c
mxs: Include the right kernel image in the rootfs
...
Signed-off-by: Harald Geyer <harald@ccbib.org>
Acked-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 45368
2015-04-10 21:34:21 +00:00
6d0ad03fac
kernel: remove references to kmod-of-i2c
...
these break the IB since the module is part of i2c-core now
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45363
2015-04-10 13:39:33 +00:00
9428c5609b
kernel: add jffs2 RENAME_WHITEOUT support, fixes overlayfs renames ( #19432 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45362
2015-04-10 11:52:59 +00:00
e1f0a91dfe
kernel: remove linux 3.10 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45360
2015-04-10 11:52:47 +00:00
4e826d8303
b53: clean up code to match kernel style better
...
* properly enclose macro arguments in paranthesis on use
* remove trailing white space
* convert C99 // comments
* add missing blank lines after declaration
* remove braces from single statement blocks
* split lines > 80 chars (except for one)
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45356
2015-04-10 10:29:04 +00:00
61885f95f0
b53: define registers available and needed on BCM5301X
...
They are also present on some BCM63xx switches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45355
2015-04-10 10:28:46 +00:00
9d6e04a4f1
bcm53xx: build image for ASUS RT-AC56U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45353
2015-04-10 09:58:00 +00:00
71fcbffc91
bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45352
2015-04-10 09:42:48 +00:00
3bc1f36e2b
sunxi: don't enable ARMTHUMB XZ BCJ filter in kernel
...
Having CONFIG_XZ_DEC_ARMTHUMB enabled breaks squashfs when ARM BCJ
filter was used to create the filesystem (and that's what we do on
all ARM targets). Thus unset CONFIG_XZ_DEC_ARMTHUMB to fix
squashfs on sunxi.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45347
2015-04-10 08:29:26 +00:00
6adf864770
ipq806x: automatically select kmod-usb-phy-qcom-dwc3
...
kmod-usb-phy-qcom-dwc3 is required to get USB working on ipq806x. It was
missed in previous commit so let's enable it automatically.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45345
2015-04-10 08:28:44 +00:00
607a7a35be
ralink: fix cevt-r4k hack
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45342
2015-04-10 08:27:44 +00:00
f4edd1b918
generic/3.18: add missing wireless symbols
...
triggered by enabling RFKILL in global build options
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45335
2015-04-09 10:33:11 +00:00
b7f19a5b26
ramips: Add support for Microduino MicroWRT
...
MicroWRT is an wireless router with 2 USB,1 ethernet port. It
has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
combine with the core board. The detailed information, please refer to
https://www.microduino.cc/wiki/index.php?title=Main_Page
This patch adds support for it.
Because there is only one port,so disabled VLAN and use eth0 as lan
port. and only a power LED control by power pin.
Signed-off-by: 盛凯 <shengkai81@gmail.com>
SVN-Revision: 45331
2015-04-09 10:32:37 +00:00
8f92e94a74
ar71xx: enable LEDs on Hornet-UB X2
...
None of the LEDs are enabled by default on the Hornet-UB X2 board
(the 16/64MB version of the Hornet-UB), because it uses a different
board-name ("hornet-ub-x2"); but hornet-ub and hornet-ub-x2 boards
are equivalent WRT their LEDs.
SIgned-off-by: Joshua Judson Rosen <jrosen@harvestai.com>
SVN-Revision: 45328
2015-04-09 10:32:08 +00:00
fb0534bcc3
generic: add a few missing symbols for 4.0
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45324
2015-04-09 10:28:59 +00:00
2198db252c
bcm53xx: switch to the otrx for verifying TRX images
...
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45320
2015-04-09 06:33:56 +00:00
c6f9582116
brcm47xx: image: use "-" separator for device version
...
This makes legacy subtarget follow two other.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45319
2015-04-09 05:40:37 +00:00
a8b0e75291
brcm47xx: verify also standard TRX images during sysupgrade
...
It allows detecting data corruption for plain TRX as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45318
2015-04-09 05:36:16 +00:00
3fad95446a
brcm47xx: fix WRT300N devices magics for sysupgrade check
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45317
2015-04-09 05:22:10 +00:00
44b128b0aa
brcm47xx: switch to the otrx for verifying TRX images
...
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45316
2015-04-09 05:22:04 +00:00
1630498e4c
kernel: remove ATHEROS_AR{231X,71XX} config symbols from the patches
...
Those don't exist anymore.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45314
2015-04-08 16:21:04 +00:00
80971cd0f9
brcm47xx: image: use new (& fixed) FILESYSTEM variable for trx command
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45313
2015-04-08 09:50:57 +00:00
4c1ee6f24d
bcm53xx: replace few BCM5301X patches with versions sent upstream
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45311
2015-04-08 09:22:02 +00:00
705651884d
brcm47xx: update legacy subtarget description
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45310
2015-04-08 05:55:32 +00:00
7798074429
brcm47xx: add fix "Data bus error" on CardBus ssb SoCs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45308
2015-04-08 05:09:42 +00:00
1d2abb6f16
brcm47xx: reverse 2 LEDs polarity on WRT320N v1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45307
2015-04-08 04:46:27 +00:00
a9d2a1aa29
kernel: backport ssb patches up to changes queued for 4.1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45306
2015-04-07 22:06:17 +00:00
8100b227a9
generic/4.0: upgrade to 4.0-rc7
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45305
2015-04-07 21:34:38 +00:00
95f7fb8f49
brcm47xx: define rest of LEDs & buttons for WRT320N
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45304
2015-04-07 21:31:36 +00:00
7a9fe56452
generic/3.18: upgrade to 3.18.11
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45303
2015-04-07 21:29:26 +00:00
be2d60465d
mvebu: disable cpu idle on a38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45302
2015-04-07 21:13:44 +00:00
0bd06aca20
ar71xx: add user-space support for RB911G-5HPacD
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45300
2015-04-07 20:04:14 +00:00
d0a6b278db
ar71xx: add initial support for RB911G-5HPacD
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45299
2015-04-07 20:04:03 +00:00
96b006eb32
ar71xx: routerboot: export extended wlan data via sysfs
...
Export the data to make it accessible from user-space.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45298
2015-04-07 20:03:43 +00:00
76b5a9aa7d
ar71xx: routerboot: add support for extended radio data
...
On newer Mikrotik boards, the radio calibration data
is stored differently and uses LZO compression instead
of RLE.
Update the RouterBOOT helper code to support the new
format.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45297
2015-04-07 20:03:35 +00:00
f0cbd004ee
ar71xx: select RLE_DECOMPRESS directly by the RouterBOOT helper code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45296
2015-04-07 20:03:24 +00:00
298a46c0b3
kernel: add support for the MX25L512E and SI25CD512 SPI flash chips
...
These are used on some MikroTik boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45295
2015-04-07 20:03:15 +00:00
f60fea1923
Upstream commits 43b68879de27b1993518687fbc6013da80cdcbfe and ce6031c89a35cffd5a5992b08377b77f49a004b9 improve the cpuidle driver on Armada XP. The latter commit improves performance at the slight expense of power consumption.
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45294
2015-04-07 18:13:51 +00:00
503d845522
brcm47xx: drop old patch disabling cardbus mode on Netgear WNR834B
...
First of all this patch was affecting other devices, not just Netgear
WNR834B. E.g. Linksys WRT300N v1 also has boardtype 0x0472.
This was breaking PCI on WRT300N, ssb couldn't detect core working in
hostmode (due to mips_busprobe32 failing).
Secondly this patch should not be needed for years now. From the analyze
of #8861 it seems it was needed just to make devices at slots other than
0 discoverable. Setting cardbus to 0 was simply making ssb allow access
to PCI config for devices other than bridge.
With the upstream commit a6c8462 (ssb: fix cardbus slot in hostmode) we
allow accessing device at slot 1 which should be enough for CardBus.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45293
2015-04-07 15:40:51 +00:00
b6e8da2e14
bcm53xx: image: share function checking TRX in provided firmware
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45292
2015-04-07 14:14:08 +00:00
7abd779730
bcm53xx: display all errors (not just the 1st one) when checking image
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45291
2015-04-07 14:14:02 +00:00
a19b69a717
bcm53xx: compare provided firmware magic with device magic
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45290
2015-04-07 14:13:56 +00:00
e2b59e4dbc
brcm47xx: detect Linksys WRT320N v1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45289
2015-04-07 13:08:17 +00:00
9f740ddc0d
brcm47xx: backport MIPS BCM47XX patches queued for 4.1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45288
2015-04-07 12:54:23 +00:00
3fa00eeda2
brcm47xx: group MIPS BCM47XX backported patches by source kernel
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45287
2015-04-07 11:54:18 +00:00
df7bb89edd
ar71xx: fix new mktplinkfw image code - flags for sysupgrade vs factory were swapped ( fixes #19400 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45281
2015-04-06 19:26:30 +00:00
a6d4d1e152
x86: set ARCH_PACKAGES for the x86_64 subtarget ( fixes #19425 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45278
2015-04-06 10:07:43 +00:00
bf26426fd8
ipq806x: another missing symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45277
2015-04-05 07:53:32 +00:00
10a71220f2
kernel: CONFIG_BRIDGE should not be overridden
...
this breaks ebtables, netfilter, ... during fullbuilds
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45276
2015-04-05 07:40:38 +00:00
2738cfcfda
arm64: remove CGROUPS override
...
SCHED_AUTOGROUP was turned on by default which forces the use of
CGROUPS, conflicting with the options we offer from menuconfig, remove
that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45275
2015-04-04 19:33:32 +00:00
3e6c6e0c7b
mcs814x: switch to 3.18 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45274
2015-04-04 18:01:26 +00:00
b1ba4c5096
mcs814x: add support for 3.18
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45273
2015-04-04 18:01:07 +00:00
67f4c4b992
xburst: mark the asoc modules as BROKEN until the upstream fixes get merged
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45267
2015-04-03 20:41:50 +00:00
4ad0ad9817
ipq806x: enable usb3 packages in default profile
...
Default profile already enables usb2 so we'll do the same for usb3 now
that we have support for it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45262
2015-04-03 19:06:38 +00:00
5d52f4b51d
ipq806x: add platform usb support
...
This change adds DWC3 QCOM USB phys and TCSR drivers. These are
cherry-picked from the following LKML threads:
*dwc3 qcom: https://lkml.org/lkml/2014/9/12/599
*tcsr: https://lkml.org/lkml/2015/2/9/579
We're also adding an additional patch to add the corresponding dev nodes
in the IPQ806x and AP148 dts files.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45261
2015-04-03 19:06:30 +00:00
114338003a
kernel: add package for dwc3 usb driver used on ipq806x
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45260
2015-04-03 19:06:21 +00:00
654312267c
ipq806x: enable usb support
...
This change doesn't make USB functional but it does make it selectable
from a configuration perspective.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45259
2015-04-03 19:06:11 +00:00
e26f0d86e8
ipq806x: another missing symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45257
2015-04-03 19:05:57 +00:00
541f569a9d
linux: Add missing config options to generic configs
...
These missing options have been noticed while enabling the following
configuration options on ipq806x, but they're available in the standard
kernel:
*ARCH_QCOM
*CONFIG_USB_SUPPORT
*CONFIG_USB_DWC3
*CONFIG_MFD_SYSCON
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45256
2015-04-03 18:48:10 +00:00
4869387480
ipq806x: clean-up kernel config file
...
Options that used to be in target config have been added to the generic
config file, so remove them.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45255
2015-04-03 18:47:51 +00:00
a1b1be473e
omap: add missing symbols
...
enabled by default like other TWL4030 symbols
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45238
2015-04-02 14:32:01 +00:00
69aa85a0d2
omap: add profile for BeagleBoard
...
original BeagleBoard has no Ethernet
provide a profile with all available USB Ethernet adapters
EBVBeagle comes with a kmod-usb-net-mcs7830 compatible device
tested with BeagleBoard C4
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45237
2015-04-02 14:31:51 +00:00
245ebe83dc
omap: remove patch wlcore Add-support-for-DT-platform-data
...
- does not compile with 3.18
compile error: 'struct wl12xx_platform_data' has no member named 'gpio'
- different version was sent 2015 but cannot be tested by me
see "[PATCH v7 0/6] wlcore: add device-tree support" series
in linux-omap
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45235
2015-04-02 14:31:32 +00:00
509cce44bd
bcm53xx: sprom: sync with mainline driver
...
The main difference now is bcm53xx registering it as platform (DT)
driver.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45230
2015-04-02 12:02:56 +00:00
91071e366c
bcm53xx: sprom: simplify reading NVRAM after last backports
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45229
2015-04-02 12:01:56 +00:00
bb0e931298
ipq806x: add missing symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45228
2015-04-01 22:57:54 +00:00
aefcd2b84c
brcm47xx: backport two MIPS nvram.c patches
...
Also replace SPROM patch with (the same) mainlined version.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45227
2015-04-01 20:23:37 +00:00
0bba806cb7
kernel: add missing symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45218
2015-04-01 13:06:14 +00:00
eeff1f0a12
ixp4xx: fix beeper module dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45214
2015-04-01 09:03:13 +00:00
3ec7ccf501
config: add an option to enable KPROBE
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45212
2015-04-01 08:33:04 +00:00
bf7eeea7ee
ipq806x: clean up kernel conf
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45211
2015-04-01 08:32:29 +00:00
d3a9fc4586
ipq806x: add support for 4.0 kernel
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45210
2015-04-01 08:32:03 +00:00
2d74104b52
ipq806x: move 020-add-ap148-bootargs.patch in patches-3.18
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45209
2015-04-01 08:31:52 +00:00
449c5f7b30
ramips: Add support for ZTE Q7
...
ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC.
I can,t find any information about this router on ZTE's website.
But I found this : http://en.cctairmobi.com/plus/list.php?tid=40
This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D
This patch adds support for it.
Because there is only one port,I disabled VLAN and use eth0 as lan port.
I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-(
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 45208
2015-04-01 08:31:46 +00:00
e078fbdacf
kernel: add missing symbols to config and modules
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: changes in input.mk broke the patch, some of the CONFIG_SND_*
stuff was added already
SVN-Revision: 45205
2015-04-01 08:31:26 +00:00
bf828d3fd0
bcm53xx: use bcm47xx_nvram.c with the latest patches
...
This will be hopefully a mainline version.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45204
2015-04-01 07:21:59 +00:00
36e10677df
ar71xx: fix platform device support in the gpio-74x164 driver
...
Platform device support has been removed from the gpio-74x164
driver in 3.14. Restore that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45203
2015-03-31 21:31:36 +00:00
9c5aa7c528
brcm47xx: image: share function checking TRX in provided firmware
...
This will allow us to calculate crc32 in a shared code.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45202
2015-03-31 21:16:19 +00:00
f079ad97ce
mvebu: use CONFIG_MANGLE_BOOTARGS
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45200
2015-03-31 19:27:59 +00:00
77f322e0d7
mvebu: add missing a38x dts labels
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45199
2015-03-31 19:23:32 +00:00
9bb302ff9e
generic/4.0: upgrade to 4.0-rc6
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45198
2015-03-31 19:22:28 +00:00
35df52f89f
generic/3.18: upgrade to 3.18.10
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45197
2015-03-31 19:21:13 +00:00
17fb965d6b
generic: add CONFIG_MANGLE_BOOTARGS and disable it by default
...
Enabling this option renames the bootloader supplied root=
and rootfstype= variables, which might have to be know but
would break the automatisms OpenWrt uses.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45196
2015-03-31 19:18:03 +00:00
b9c4dadc11
mvebu: deal with the new path in the fan control script for Linux 4.0+
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45195
2015-03-31 19:12:27 +00:00
82f0308be9
kernel: update yaffs code to the latest version
...
Use the latest version of the yaffs code. Fetched from the
yaffs2 git tree and it is based on the following commit:
commit 7e5cf0fa1b694f835cdc184a8395b229fa29f9ae
Author: Charles Manning <cdhmanning@gmail.com>
Date: Thu Aug 7 11:25:05 2014 +1200
yaffs-direct: Basic tests. Add lpthread flag for background gc support
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45188
2015-03-31 15:31:57 +00:00
ad9f61d3bb
kernel: add a couple missing symbols for 4.0
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45186
2015-03-31 13:23:46 +00:00
090a510576
brcm47xx: image: convert legacy Linksys & Netgear devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45184
2015-03-31 12:44:31 +00:00
4faba3cc2e
brcm47xx: image: convert generic subtarget to the new images system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45183
2015-03-31 12:17:08 +00:00
3d481d31ed
brcm47xx: image: convert all mips74k images to the new building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45181
2015-03-31 11:26:50 +00:00
184c0af4e2
brcm47xx: image: add helpers for defining devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45180
2015-03-31 11:26:45 +00:00
a709beb4ae
brcm63xx: fix zyxel kernel name
...
Accidentally left over development artifact.
Reported-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45179
2015-03-31 09:54:15 +00:00
6c1852cb26
brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings
...
KERNEL_IMAGE is used as target rule so reusing the same name causes:
Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Unfortunately this will cause copying vmlinux.lzma over and over like:
cp vmlinux.lzma FOO-kernel.bin
which is redundant on brcm47xx where we never modify kernel image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45178
2015-03-31 08:56:08 +00:00
cc9600a1eb
ar71xx/mikrotik: disable atnoher two non MikroTik boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45177
2015-03-31 08:30:56 +00:00
04ba95f6d3
ar71xx/mikrotik: disable non MikroTik boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45176
2015-03-31 07:56:25 +00:00
26800ef074
ar71xx/mikrotik: use correct symbol to disable overlayfs
...
The Kconfig symbol has been changed in 3.18.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45175
2015-03-31 07:56:22 +00:00
8ec31f25e3
brcm47xx: fix checking cross-vendors firmware images
...
This change won't allow installing e.g. Netgear firmware on Linksys
device.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45174
2015-03-31 07:26:30 +00:00
463a449f84
brcm47xx: update Linksys firmwares (add new E2500 versions)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45173
2015-03-31 07:26:22 +00:00
a445846305
brcm47xx: display all errors (not just the 1st one) when checking image
...
This way people forcing upgrade will know what may go wrong.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45172
2015-03-31 06:05:35 +00:00
44dfe17576
brcm47xx: recognize more device specific firmwares
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45171
2015-03-31 05:39:33 +00:00
b34040f990
brcm47xx: compare provided firmware magic with device magic
...
This makes sysupgrade reject firmware images for different devices.
Right now only support for 2 sample devices is implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45170
2015-03-30 22:06:11 +00:00
a54b8303d2
brcm63xx: don't build non-dtb kernels anymore
...
Now that all supported boards have an dts there is no need for a
dtb free kernel anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45169
2015-03-30 20:21:24 +00:00
0f08442ded
brcm63xx: move DSL-275XB to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45168
2015-03-30 20:21:15 +00:00
f77b446051
brcm63xx: move bcm6318 reference boards to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45167
2015-03-30 20:21:07 +00:00
f644c1581a
brcm63xx: move VG50 to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45166
2015-03-30 20:21:01 +00:00
f973580488
brcm63xx: move V2110 to DT
...
Also readd image generation which was accidentally dropped in r43364.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45165
2015-03-30 20:20:49 +00:00
d8ba40cfcd
brcm63xx: use relocate to move the kernel back to start of ram
...
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327 ).
Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45164
2015-03-30 20:20:15 +00:00
8353a3bd45
generic: relocate: make the cacheline size configurable
...
Different targets have different cache line sizes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45163
2015-03-30 20:20:10 +00:00
703c41cf01
ramips: move relocating loader to common location
...
Allow other targets to use it, too.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45162
2015-03-30 20:20:08 +00:00
3129f0c6f2
ar71xx/mikrotik: re-enable 4KiB flash sector erase
...
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45161
2015-03-30 19:57:52 +00:00
62a8665fea
ar71xx: re-enable AR8216_PHY_LEDS
...
The setting has been lost during the transition to 3.18.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45160
2015-03-30 18:12:54 +00:00
18f6a34113
ar71xx: sync kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45159
2015-03-30 18:12:50 +00:00
2b925161d8
xburst: add missing symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45155
2015-03-30 12:47:51 +00:00
7e7f329ccf
kernel/generic: (try) fixing MAP-E patch broken in 4.0
...
Now it at least compiles, otherwise untested.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45145
2015-03-30 08:48:51 +00:00
1751676c8b
brcm47xx: convert Netgear WNDR3700 V3 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45144
2015-03-29 19:53:11 +00:00
8e4b74b9fe
brcm47xx: convert Linksys E1200 V2 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45143
2015-03-29 18:15:38 +00:00
23d37c1208
ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC
...
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
after the zero (which wasn't always visible using busybox tools, but could
confuse other scripts)
Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.
The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.
The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.
Fixes #18992 .
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45140
2015-03-29 12:58:01 +00:00
ebf1e2461a
x86_64: add description, maintainership
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45138
2015-03-29 12:17:39 +00:00
661f05262b
arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45132
2015-03-29 07:36:17 +00:00
1e2f88b17b
imx: add initial version of 3.18 support
...
This is build tested only.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45125
2015-03-29 05:48:56 +00:00
375337266d
kernel: add few missing symbols
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45118
2015-03-29 04:50:16 +00:00
d949d88ef6
kernel: add symbol
...
Several targets are not using EMAC_ROCKCHIP so define it in generic config.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45117
2015-03-29 04:43:59 +00:00
e731ea23a8
x86: add myself as maintainer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45116
2015-03-29 04:32:15 +00:00
196fb76a4c
x86: make x86_64 a subtarget instead of a standalone target
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45115
2015-03-29 04:32:01 +00:00
09aad60610
x86: remove bogus bzImage copy that breaks initramfs+no-initramfs builds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45114
2015-03-29 04:31:35 +00:00
795e7cf60d
kernel: fix linux/spi/spidev.h portability issues with musl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45105
2015-03-29 04:28:24 +00:00
9444bc1ee2
kernel: clean up fq_codel default patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45104
2015-03-29 04:28:02 +00:00
85b0d25861
adm8668: switch to 3.18
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45095
2015-03-28 18:18:50 +00:00
f51f3ee9bc
adm8668: add 3.18 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45094
2015-03-28 18:18:38 +00:00
26cf81b94b
kernel: refresh 3.18 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45093
2015-03-28 18:17:46 +00:00
0b13d69bba
arm64: update to linux 3.18
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45092
2015-03-28 13:38:52 +00:00
693e5aae41
brcm63xx: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45089
2015-03-28 13:21:09 +00:00
130acd0f4c
mxs: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45088
2015-03-28 13:21:04 +00:00
b63aa281ee
rb532: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45087
2015-03-28 13:20:58 +00:00
56c580f5f4
uml: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45086
2015-03-28 13:20:52 +00:00
7427007193
x86: remove the olpc subtarget, it has been unmaintained for a long time
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45083
2015-03-28 11:37:08 +00:00
518d2b90e6
iop32x: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45082
2015-03-28 10:44:55 +00:00
22b38f145d
cobalt: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45081
2015-03-28 10:44:49 +00:00
04182658ef
sibyte: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45080
2015-03-28 10:44:44 +00:00
e38b78926a
sparc: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45079
2015-03-28 10:44:37 +00:00
40c5bee0cd
cns21xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45078
2015-03-28 10:44:31 +00:00
65c567da13
rb532: switch to 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45073
2015-03-27 21:22:22 +00:00
2daa34da02
rb532: align partitions to 128KB
...
because block2mtd wants "erasesize must be a divisor of device size" since 3.15
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45072
2015-03-27 21:22:17 +00:00
c2d1ad30e8
rb532: add 3.18 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45071
2015-03-27 21:22:10 +00:00
85bf288428
lantiq: remove arphaned folder
...
the new buildbot was picking this up as a valid target.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45068
2015-03-27 19:47:22 +00:00
ddb5ab2acf
ralink: mt7621 add ECHI OCHI XCHI support
...
Lets hope that this time it won't break the other ralink targets.
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 45067
2015-03-27 19:07:29 +00:00
c6a29d2528
gemini: fix usb driver compilation on 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45065
2015-03-27 16:03:16 +00:00
19db04e699
mxs: update dtb path in image Makefile
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45056
2015-03-27 02:35:11 +00:00
f76a85515a
ar71xx: add missing id for WNR2000v3 image ( fixes #18959 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45054
2015-03-27 00:35:34 +00:00
a077e4af96
mxs: bump to 3.18
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45053
2015-03-26 23:35:50 +00:00
01748fbce2
mxs: add sdcard image builder
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45052
2015-03-26 23:34:43 +00:00
39370cbe25
mxs: enable uboot-mxs-duckbill build for duckbill profile
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45044
2015-03-26 23:04:27 +00:00
3012319505
generic: drop old kirkwood mach types
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45043
2015-03-26 22:48:31 +00:00
1f26498751
mxs: add 3.18 support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45041
2015-03-26 22:18:47 +00:00
65708f749a
gemini: make dd commands more portable
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45039
2015-03-26 20:37:19 +00:00
6cda886f60
gemini: switch mantainer to myself
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45038
2015-03-26 20:37:09 +00:00
17532417c7
gemini: nuke 3.10 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45037
2015-03-26 20:36:59 +00:00
b953a14036
gemini: remove broken flag
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45036
2015-03-26 20:36:49 +00:00
dc622768a7
gemini: switch to 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45035
2015-03-26 20:36:40 +00:00
44b3e3af17
gemini: don't build jffs2 image for Raidsonic board
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45034
2015-03-26 20:36:35 +00:00
a304f3d2b6
gemini: add 3.18 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45033
2015-03-26 20:36:30 +00:00
b18f5eb44a
xburst: Update to 3.18
...
Update the xburst target to kernel version 3.18 and also remove the broken 3.10 support.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
SVN-Revision: 45031
2015-03-26 19:46:01 +00:00
c25bf32f8d
ar71xx: fix image size checks for WNDR3700
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45030
2015-03-26 18:50:44 +00:00
40d25d3eb5
ralink: drop xhci patch, it break !mt7621 builds
...
will re-add it tomorrow after fixing it
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45028
2015-03-26 16:24:19 +00:00
2cedb63d84
ralink: the xhci patch broke ehci Signed-off-by: John Crispin <blogic@openwrt.org>
...
SVN-Revision: 45027
2015-03-26 14:49:26 +00:00
f6eff33b8d
mvebu: fixup usb3 support on the a38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45026
2015-03-26 14:32:45 +00:00
4bac1253c1
generic/4.0: upgrade to 4.0-rc5
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45025
2015-03-26 14:06:42 +00:00
23b880b373
mvebu: add a coherency fix which didn't make it to -stable, yet
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45024
2015-03-26 13:52:21 +00:00
21e0f98903
ralink: add default pinctrl node for mt7621 eval kit
...
fixes #19213
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45022
2015-03-26 12:23:02 +00:00
0a9e38bb21
ralink: mt7621 add ECHI OCHI XCHI support
...
The usb stroage not working since updated 3.18. Porting from MTK's source code.
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 45021
2015-03-26 10:59:51 +00:00
024e0c1835
ralink: add FireWRT power button
...
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
SVN-Revision: 45019
2015-03-26 10:59:36 +00:00
10aa09b731
ralink: MT7621 add i2c controller driver
...
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Last time i got some mess . This is new version.
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
SVN-Revision: 45018
2015-03-26 10:59:31 +00:00
ad91262a94
kernel: add missing symbol
...
Signed-off-by: John Szakmeister <john@szakmeister.net>
SVN-Revision: 45017
2015-03-26 10:59:24 +00:00
67c83a6595
x86: add missing symbol to xen_domu
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45016
2015-03-26 10:59:10 +00:00
2d994f2fdc
cobalt: enable bridge
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45014
2015-03-26 10:58:59 +00:00
c67144cc05
kernel: extend seccomp with a LOG action
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45007
2015-03-26 10:58:03 +00:00
414e8ba634
bcm53xx: use the correct kernel image
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45003
2015-03-26 10:42:36 +00:00
af69bf56b6
drop 3.19 support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45002
2015-03-26 09:42:59 +00:00
34b51b6f6f
ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45000
2015-03-25 17:58:14 +00:00
8d2d62ca95
ar71xx/image: add tplink device template for new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44999
2015-03-25 17:58:10 +00:00
41785176ec
ar71xx/image: add Build/mktplinkfw as buildstep for new build code
...
Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44998
2015-03-25 17:58:05 +00:00
48c69e3022
bcm53xx: convert to new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44996
2015-03-25 17:57:44 +00:00
8ffc831bef
brcm63xx: use a lookup for bcmcia's ready gpio
...
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44995
2015-03-25 15:37:38 +00:00
1e07f8c7ff
brcm63xx: fix bcm96328avng board name
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44994
2015-03-25 15:36:26 +00:00
4dc169f9a2
brcm63xx: fix bt v2500v dts based detection
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44993
2015-03-25 15:36:15 +00:00
10cdfd04e6
brcm63xx: move RTA770(B)W to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44992
2015-03-25 15:36:12 +00:00
0e4c1ba284
brcm63xx: move MAGIC to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44991
2015-03-25 15:36:05 +00:00
582dfc52f5
brcm63xx: move CPVA502+ to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44990
2015-03-25 15:35:57 +00:00
46b4d4d1d5
brcm63xx: move dg834g v4 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44989
2015-03-25 15:35:43 +00:00
30a579c674
brcm63xx: move dsl-2640u to dts
...
Also build image again(?).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44988
2015-03-25 15:35:37 +00:00
16ea19053a
brcm63xx: move bcm963268bu_p300 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44987
2015-03-25 15:35:24 +00:00
ad218d3033
brcm63xx: fix compilation on 3.14
...
Fixes the following issue:
drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44986
2015-03-25 15:35:15 +00:00
2d3371cd0f
brcm63xx: Add BT Home Hub 2A support.
...
Support for the BT HomeHub 2.0 Type A.
This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.
The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.
Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 44985
2015-03-25 15:35:12 +00:00
065d6e9047
brcm63xx: move kernel load address to 8MiB
...
Fixes boot when uncompressed kernel is > 4 MiB (#19251 ).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44984
2015-03-25 15:34:59 +00:00
ee0140a678
brcm63xx: hcsimage: respect load address
...
Respect the vmlinux load address when generating images.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44983
2015-03-25 15:34:45 +00:00
d84fafb9f3
brcm63xx: add Livebox 1 firmware image generation
...
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the bcm63xx images
builder makefile to generate the livebox 1 firmware.
I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.
Regards
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44982
2015-03-25 15:34:40 +00:00
77e3d442b0
brcm63xx: add a dummy image recipe for boards missing proper images
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44981
2015-03-25 15:34:26 +00:00
02d68c2b57
brcm63xx: drop non-dtb image recipe
...
All images generated contain dtbs, so it is now unused.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44980
2015-03-25 15:34:23 +00:00
fafa3f57e3
kernel: merge upstream bgmac driver improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44978
2015-03-25 14:30:46 +00:00
68ca1f285c
bcm53xx: enable the full-line-of-zero optimization in the cache controller
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44977
2015-03-25 14:30:40 +00:00
621979b49f
kernel: yaffs: use new_sync_{read,write} for 3.18+
...
Using the do_sync_{read,write} functions in conjunction
with the generic_file_{read,write}_iter causes a kernel
panic like this:
root@OpenWrt:/# mount -t yaffs /dev/mtdblock5 /mnt
[ 2884.110000] yaffs: dev is 32505861 name is "mtdblock5" rw
[ 2884.120000] yaffs: passed flags ""
root@OpenWrt:/# hexdump -vC -n 64 /mnt/kernel
[ 2902.700000] CPU 0 Unable to handle kernel paging request at virtual \
address 00000000, epc == 00000000, ra == 80129414
[ 2902.710000] Oops[#1 ]:
[ 2902.710000] CPU: 0 PID: 1030 Comm: hexdump Not tainted 3.18.9 #2
[ 2902.710000] task: 878e7a20 ti: 868c6000 task.ti: 868c6000
[ 2902.710000] $ 0 : 00000000 fffffff8 00000000 00000000
[ 2902.710000] $ 4 : 868c7e70 868c7ea8 00000001 868c7f08
[ 2902.710000] $ 8 : 00000038 80064f18 80072280 00000000
[ 2902.710000] $12 : 7fa152b8 7709e3a0 00c42008 7709e3a0
[ 2902.710000] $16 : 868c7f08 86a46000 00000010 878e7a20
[ 2902.710000] $20 : 7705c4b0 00000010 00000000 00000000
[ 2902.710000] $24 : 770960bc 7707dd78
[ 2902.710000] $28 : 868c6000 868c7e58 7f8e7030 80129414
[ 2902.710000] Hi : 00000000
[ 2902.710000] Lo : ffffffff
[ 2902.710000] epc : 00000000 (null)
[ 2902.710000] Not tainted
[ 2902.710000] ra : 80129414 do_sync_read+0x7c/0xb4
[ 2902.710000] Status: 1900dc03 KERNEL EXL IE
[ 2902.710000] Cause : 00800008
[ 2902.710000] BadVA : 00000000
[ 2902.710000] PrId : 00019750 (MIPS 74Kc)
Change the yaffs code to use the new_sync_{read,write} functions
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 44974
2015-03-25 08:59:12 +00:00
8fdd0fb07c
kernel: backport rest of bcma patches
...
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44970
2015-03-24 10:39:10 +00:00
a7724918c9
kernel: mac80211: backport bcma patch renaming IRQ control function
...
This backports upstream commit 702131e2a393b45174be326f1dbe20b658b4f157
bcma: move PCI IRQ control function to host specific code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44969
2015-03-24 10:38:59 +00:00
a4d7571367
mark 3.10 targets as broken
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44968
2015-03-24 10:38:50 +00:00
02e2548b84
x86: use PARTUUID instead explicitly specifying the device by default
...
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.
It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.
Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44966
2015-03-24 10:08:12 +00:00
5d9eeab64a
build: remove obsolete references to cris and avr32
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44965
2015-03-24 10:07:40 +00:00
d830d34b00
x86_64: fix PARTUUID format with leading zeros
...
Otherwise the root device won't be found in 1/16 of the generated images
(whenever the signature starts with a zero digit).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44959
2015-03-24 10:06:40 +00:00
2450985de9
avr32: remove target
...
It depends on obsolete compilers and only works on one device (an
evaluation board).
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44956
2015-03-24 10:06:14 +00:00
3b6c70b7fc
kernel: update bcma with most patches from wireless-drivers-next
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44955
2015-03-24 07:15:31 +00:00
eb90a6d7d8
kernel: backport fixed_phy_register EXPORT fix from 3.19
...
This fixes
ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/bgmac.ko] undefined!
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44954
2015-03-23 18:39:16 +00:00
2375f37723
generic/3.18: refresh patches
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44951
2015-03-23 13:28:52 +00:00
5be4f2b5b8
mvebu: update mamba dts
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44949
2015-03-23 12:44:30 +00:00
0a84da0841
bcm53xx: add missing cache controller errata options
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44947
2015-03-23 10:14:27 +00:00
a6f914d573
bcm53xx: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44946
2015-03-23 10:14:20 +00:00
e890a3bc9a
ramips: make ethernet register map u16 instead of u32
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44940
2015-03-22 15:11:14 +00:00
fb6164a377
bcm53xx: add SMP support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44939
2015-03-22 15:07:40 +00:00
577da84c25
uml: bump to 3.18
...
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44937
2015-03-22 12:36:57 +00:00
3c0ea6eced
au1000: drop 005-fix-cpu-clk.patch
...
it has been upstreamed and treackled down with the latest 3.18 update
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44935
2015-03-22 07:03:02 +00:00
e0155ad7b0
bcm53xx: add support for Asus RT-AC68U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44934
2015-03-22 01:57:15 +00:00
79c152b56b
bcm53xx: fix Asus RT-AC87U magic (even if not used yet)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44933
2015-03-22 01:57:10 +00:00
d324dd4ff3
bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44932
2015-03-22 01:57:06 +00:00
a4523c8e1d
bcm53xx: refresh patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44931
2015-03-22 01:56:47 +00:00
35c52bc261
oxnas: remove pre kernel 3.18 support from pinctrl driver
...
just some pruning...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44923
2015-03-21 21:47:20 +00:00
3256194aff
oxnas: add support for kernel 4.0
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44922
2015-03-21 21:47:03 +00:00
908a82ab61
kernel: add two more missing config symbols
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44921
2015-03-21 21:46:47 +00:00
7d6eec16b6
brcm2708: remove a patch that was added in the stable update ( fixes #19253 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44920
2015-03-21 21:24:08 +00:00
37912d66c2
ramips: increase NAPI weight for mt7621 to improve routing performance a bit more
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44918
2015-03-21 12:08:07 +00:00
ba10454b91
kernel: backport bgmac patches
...
This allows dropping some hacky bcm53xx bgmac patch forcing link state.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44917
2015-03-21 11:45:50 +00:00
782e432797
bcm53xx: enable FIXED_PHY, we will need it for bgmac
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44916
2015-03-21 11:45:27 +00:00
db3b862d1c
kernel: fix ipsec related regression in the netfilter rtcache patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44913
2015-03-20 22:13:34 +00:00
b95a9f01c1
mvebu: set default regdomain
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44908
2015-03-20 12:15:40 +00:00
975e1357e6
ramips: fix LAN/WAN MAC address for WSR-600/1166
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44903
2015-03-20 09:37:07 +00:00
1773aa5163
octeon: add er8 sysupgrade support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44902
2015-03-20 08:49:08 +00:00
e9b6602a84
octeon: Add MMC support for EdgeRouter ER8
...
this is a backport of a series posted on the lmo mailing list
Signed-off-by: Jonathan Thibault <jonathan@navigue.com>
SVN-Revision: 44901
2015-03-20 08:49:02 +00:00
dac483acb4
ramips: fix WSR-1166 green power LED
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44898
2015-03-19 21:51:44 +00:00
bb81ff2374
omap24xx: Add basic config for linux-4.0
...
Also remove 3.3 config. It's broken and unsupported.
SVN-Revision: 44895
2015-03-19 18:45:32 +00:00
9b1840b861
ipv6: fix throw routes
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44894
2015-03-19 15:46:03 +00:00
32a6800a41
kernel: remove linux 3.8 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44890
2015-03-19 11:58:59 +00:00
3600b84cbd
ep93xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44889
2015-03-19 11:58:54 +00:00
941ac35f77
mpc52xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44888
2015-03-19 11:58:48 +00:00
3581298348
mpc83xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44887
2015-03-19 11:58:43 +00:00
75e828c117
ar71xx: fix a double dereference in the unaligned access patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44885
2015-03-19 11:58:30 +00:00
2077b18e6b
x86_64: remove unused patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44884
2015-03-19 11:58:22 +00:00
e3d19988cf
mvebu: add Linux 4.0 support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44882
2015-03-19 10:25:44 +00:00
05bf6e0f2e
generic/4.0: fix ubi EOF marker patch
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44881
2015-03-19 10:13:21 +00:00
0d8d48641d
generic/4.0: add missing symbols
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44880
2015-03-19 10:11:20 +00:00
b011293d0b
kernel: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44877
2015-03-18 18:22:41 +00:00
17afb853ee
kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4
...
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44876
2015-03-18 18:21:08 +00:00
87568ebeac
b53: reverse duplex bit meaning for IMP state override register
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44875
2015-03-18 10:44:15 +00:00
f30358d41a
kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44873
2015-03-17 17:14:48 +00:00
553528371b
ralink: fix mt7621 i2c name
...
Signed-off-by: zouxf <fl.service@t-firefly.com>
SVN-Revision: 44868
2015-03-17 09:44:14 +00:00
29cf72ac07
lantiq/xrx200: cleanup default packages
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44867
2015-03-17 09:44:06 +00:00
55a71c1374
ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44866
2015-03-17 09:43:56 +00:00
10c5a44017
ar71xx: enable sysupgrade for the OpenMesh OM5P-AN
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44863
2015-03-17 09:43:37 +00:00
85cceb5dd0
ar71xx: add user-space support for the OpenMesh OM5P-AN
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44862
2015-03-17 09:43:31 +00:00
17a1e18ee2
ar71xx: add kernel support for the OpenMesh OM5P-AN board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44861
2015-03-17 09:43:19 +00:00
2a0fcc029f
ar71xx: detect GL.iNet model
...
There are two versions of the GL.iNet, the 6408A and the 6416A. The only
difference is the flash size.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44860
2015-03-17 09:43:13 +00:00
986af9e64e
lantiq: make xrx200 targets use the upstream dwc2 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44857
2015-03-17 09:42:56 +00:00
caf94290ce
kernel: add a few more missing config symbols
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44856
2015-03-17 07:24:51 +00:00
76811de003
brcm47xx: support SPROM/NVRAM prefixes
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44855
2015-03-17 07:07:17 +00:00
917fb76321
brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44854
2015-03-17 07:07:00 +00:00
8f63c1405f
brcm47xx: switch to 3.18
...
Tested on BCM5357B0, BCM47186B0 and BCM4706.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44853
2015-03-16 23:05:43 +00:00
7c6f7b716b
bcm53xx: switch to 3.18
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44852
2015-03-16 22:24:56 +00:00
768cf6821f
x86: refresh kvm_guest kernel config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44851
2015-03-16 21:17:45 +00:00
06cb90f8a2
kernel: add missing config symbol
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44850
2015-03-16 21:17:41 +00:00
6c42f140a0
x86: enable rtl8139 ethernet support for geode by default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44849
2015-03-16 21:00:14 +00:00
1488ed7c2c
brcm63xx: switch maintainer
...
Make Jonas the maintainer of brcm63xx.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 44848
2015-03-16 19:51:17 +00:00
2777b525c6
geode: set target to Geode GX1 to support older chips
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44847
2015-03-16 18:10:17 +00:00
343ec8d645
brcm63xx: use consistent gpio chip labeling for OF/non-OF
...
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44846
2015-03-16 13:37:38 +00:00
81e51681e7
brcm63xx: switch to 3.18
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44841
2015-03-16 11:53:22 +00:00
5d0e2d1b41
brcm63xx: call brcm63xx_detect explicitly
...
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44840
2015-03-16 11:53:14 +00:00
020e5733f9
brcm63xx: move preinit ifname detection to the preinit script
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44839
2015-03-16 11:53:06 +00:00
90da308e3b
brcm63xx: remove obsolete brcm63xx_has_reset_button
...
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44838
2015-03-16 11:52:57 +00:00
f0badcb769
brcm63xx: set status leds from within diag.sh
...
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44837
2015-03-16 11:52:49 +00:00
098377af25
brcm63xx: switch to board_name based configuration
...
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
52ffc6faa7
brcm63xx: add missing board_ids to legacy_detect
...
These boards do not have a corresponding dts file yet.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44835
2015-03-16 11:52:35 +00:00
906c9ef952
brcm63xx: add device tree based board detection
...
Use the device tree model property for detecting the board instead
of board id from nvram if present.
Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44834
2015-03-16 11:52:26 +00:00
844e92e188
brcm63xx: populate /tmp/sysinfo
...
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44833
2015-03-16 11:52:20 +00:00
9c53e344c0
brcm63xx: base-files: rename board_name to board_id
...
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44832
2015-03-16 11:52:16 +00:00
ca7f6d28c8
brcm63xx: Add DGND3700 v1 / DGND3800B support
...
This adds support for the Netgear DGND3700 v1 and DGND3800B.
DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.
The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44831
2015-03-16 11:52:10 +00:00
4fdb66373f
netlogic: bump to 3.18
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44829
2015-03-16 10:58:43 +00:00
298d67ec7b
mvebu: drop linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44828
2015-03-16 08:29:42 +00:00
d6b3eba475
kernel: add missing MTD_SPLIT_FIT_FW symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44827
2015-03-16 08:05:42 +00:00
c0a15a57bd
sunxi: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44824
2015-03-16 07:41:24 +00:00
eb396d6569
adm5120: drop 3.8 and 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44823
2015-03-16 07:41:19 +00:00
46f01fec7f
ar7: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44822
2015-03-16 07:41:10 +00:00
4d11bb0d23
ixp4xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44821
2015-03-16 07:41:05 +00:00
cc8b6c6d5b
octeon: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44820
2015-03-16 07:40:59 +00:00
a992489e4b
oxnas: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44819
2015-03-16 07:40:54 +00:00
fe33c185bd
mpc85xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44818
2015-03-16 07:40:47 +00:00
518d9fd2a0
cns3xxx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44817
2015-03-16 07:40:41 +00:00
43c66cb434
au1000: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44816
2015-03-16 07:40:19 +00:00
fb78ebb813
ar71xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44815
2015-03-16 07:40:09 +00:00
de04a1d843
realview: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44814
2015-03-16 07:40:02 +00:00
54f1c710db
malta: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44813
2015-03-16 07:39:57 +00:00
257671615b
lantiq: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44812
2015-03-16 07:39:52 +00:00
7648d80c90
ralink: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44811
2015-03-16 07:39:46 +00:00
f2f8f6974b
x86: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44810
2015-03-16 07:12:31 +00:00
9e0759ea26
x86: merge all geode based subtargets into one
...
Build all geode platform drivers into the kernel
Remove kmod-* packages for these drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44809
2015-03-16 07:05:30 +00:00
986b8baf9a
x86: remove 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44805
2015-03-16 05:57:04 +00:00
7f7e0a21b8
kernel: remove linux 3.13 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44804
2015-03-16 05:52:02 +00:00
f26bb532cf
omap: remove old kernel versions
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44803
2015-03-16 05:51:56 +00:00
495404e9a4
omap: update to linux 3.18, it has been tested by at least one builder and 3.13 has not been built by buildbot in a long time
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44802
2015-03-16 05:51:52 +00:00
c75c90edf6
kernel: port missing ubi EOF marker support patch to 3.19 and 4.0
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44801
2015-03-16 05:16:14 +00:00
adb6d8f93f
kernel: fix duplicate use of patch number 490
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44800
2015-03-16 05:16:07 +00:00
d6fbb77bc8
kernel: add a few missing config symbols for 3.18+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44799
2015-03-16 04:47:28 +00:00
d5b99a2d74
kernel: add missing description for GRO optimization patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44798
2015-03-16 04:19:09 +00:00
270bc6427b
kernel: skip GRO for packets bridged to other hosts
...
Eliminates excessive skb copying when bridging from LAN to WLAN on
ramips.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44797
2015-03-15 20:32:09 +00:00
7ea781558f
ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions
...
While the switch positions aren't explicitly labeled as on and off, we've heard
complaints about them being wrong. This patch changes the handling to match the
stock firmware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44795
2015-03-15 19:39:47 +00:00
7f3013a480
ipq806x: fix AP148 boot from NOR
...
This patch allows AP148 to boot from NOR flash.
As we're using a FIT image as kernel (which includes kernel bin + DTB)
we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT
image and automatically split the "firmware" partition into 2 MTD parts
(kernel + rootfs).
The rootfs will then be parsed and split between rootfs + rootfs_data,
as usual.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44794
2015-03-15 19:39:41 +00:00
582232cd7b
ipq806x: add ap148 bootargs to DT
...
Only one bootargs is really needed: the tty port. All the other
information will use the OpenWrt mechanisms.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44793
2015-03-15 19:39:33 +00:00
9a863f803e
kernel: mtdsplit: add support for FIT image
...
If this option is enabled, the FIT image format will be detected and
split by the mtdsplit code. Detection is based upon the FDT magic, which
will trigger the parsing and detection of the rootfs, ending-up in the
creation of the 2 new partitions.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44792
2015-03-15 19:39:27 +00:00
5ca2ad1063
Fix (invert/revert) Hornet-UB WPS LED state
...
My previous patch regarding the Hornet-UB board
(commit: beed4d82d6a0154b0cd5f7b84e2180215ace6718) actually
causes the WPS led state to be inverted. Practically this meant
that value 0 in /sys/class/led/alfa:blue:wps/brightness would
turn the LED on and any positive value (1-255) would turn it off.
The above of course is confusing and hence reverting this value
back to the way it was before beed4d82d6a0154b0cd5f7b84e2180215ace6718.
Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>
SVN-Revision: 44791
2015-03-15 19:25:48 +00:00
085b8e0014
b53: global config is part of the management page, not the control page
...
It will now actually enable the mib counters instead of enabling rx/tx for
the first switch port.
Reported-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44788
2015-03-15 14:19:28 +00:00
eed031d460
brcm63xx: brcm63xxpart: fix buffer overrun in of parser
...
We never account for the added partitions from the tag parser, so
allocated two partioness less than needed. This can cause issues when
the memory gets reused before the mtd code can actually add the
partitions.
Fixes oopses like:
[ 0.920000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.924000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
[ 0.940000] 0x000000010000-0x0000003f0000 : "linux"
[ 0.948000] CPU 0 Unable to handle kernel paging request at virtual address 00010203, epc == 8028ddf8, ra == 801ad5d4
[ 0.956000] Oops[#1 ]:
[ 0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22
[ 0.956000] task: 8181da78 ti: 8181e000 task.ti: 8181e000
[ 0.956000] $ 0 : 00000000 10008f00 00010203 81049e40
[ 0.956000] $ 4 : 00010203 000000d0 00000000 000000fd
[ 0.956000] $ 8 : 00000000 80015490 00000000 80370000
[ 0.956000] $12 : 00000000 00000001 00000000 2f736269
[ 0.956000] $16 : 00010203 000000d0 8007bde0 81482000
[ 0.956000] $20 : 00000000 00000004 81481f80 803c4b78
[ 0.956000] $24 : 00000000 00000000
[ 0.956000] $28 : 8181e000 8181fbe8 80b20000 801ad5d4
[ 0.956000] Hi : 00000000
[ 0.956000] Lo : 00000000
[ 0.956000] epc : 8028ddf8 strlen+0x4/0x20
[ 0.956000] Not tainted
[ 0.956000] ra : 801ad5d4 kstrdup+0x30/0x84
[ 0.956000] Status: 10008f03 KERNEL EXL IE
[ 0.956000] Cause : 00800008
[ 0.956000] BadVA : 00010203
[ 0.956000] PrId : 0002a010 (Broadcom BMIPS4350)
[ 0.956000] Modules linked in:
[ 0.956000] Process swapper/0 (pid: 1, threadinfo=8181e000, task=8181da78, tls=00000000)
[ 0.956000] Stack : 8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000
81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c
8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff
8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005
81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000
...
[ 0.956000] Call Trace:
[ 0.956000] [<8028ddf8>] strlen+0x4/0x20
[ 0.956000] [<801ad5d4>] kstrdup+0x30/0x84
[ 0.956000] [<8007bde0>] allocate_partition+0x58/0x93c
[ 0.956000] [<80074ce0>] add_mtd_partitions+0x90/0x144
[ 0.956000] [<801cc228>] mtd_device_parse_register+0x78/0xcc
[ 0.956000] [<801e7870>] of_flash_probe+0x658/0x728
[ 0.956000] [<80216ee0>] platform_drv_probe+0x24/0x60
[ 0.956000] [<801221f4>] driver_probe_device+0xcc/0x214
[ 0.956000] [<800466f8>] __driver_attach+0x7c/0xb4
[ 0.956000] [<800c38bc>] bus_for_each_dev+0x94/0xa4
[ 0.956000] [<800c35e4>] bus_add_driver+0x104/0x1ec
[ 0.956000] [<80122400>] driver_register+0xac/0x100
[ 0.956000] [<80113a5c>] do_one_initcall+0x148/0x204
[ 0.956000] [<803cbd1c>] kernel_init_freeable+0x168/0x220
[ 0.956000] [<800157bc>] kernel_init+0x10/0x114
[ 0.956000] [<800108a8>] ret_from_kernel_thread+0x14/0x1c
[ 0.956000]
[ 0.956000]
Code: 03e00008 27bd0028 00801021 <80430000> 10600003 00000000 080a377e 24420001 03e00008
[ 1.192000] ---[ end trace 9d89ccbcae27fe40 ]---
[ 1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.200000]
[ 1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44787
2015-03-15 14:19:22 +00:00
9d893d39bd
brcm63xx: kmod-bcm63xx-udc: fix module path for 3.18+
...
Fix the module path for linux 3.18+.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44785
2015-03-15 14:19:10 +00:00
12301a79b7
brcm63xx: fix 6368 cpu1 reg typo
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44784
2015-03-15 14:19:07 +00:00
d8d9282372
lantiq: add a better fix to strip FCS from ethernet packets on XRX200
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44771
2015-03-15 09:47:34 +00:00
55cdb4dbb3
lantiq: enable atm-esi by default for xrx200
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44769
2015-03-15 07:57:51 +00:00
17fdf5fb85
brcm2708: fix mkdosfs command line options order
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44764
2015-03-15 05:18:50 +00:00
65a0244ff8
x86: refresh kernel config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44759
2015-03-15 04:43:37 +00:00
c062741575
x86: update to kernel 3.18
...
copied target/linux/x86/config-3.14 and target/linux/x86/patches-3.14 to
3.18 equivalents and then tweaked until it built.
Tested on alix2, soekris net4826 and soekris net4521.
Still having trouble with net4826 booting from Grub, alix2 and net4521
are fine.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 44758
2015-03-15 04:43:30 +00:00
50d4775df0
kernel: fix portability issues of the x86 vdso2c utility
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44757
2015-03-15 04:43:22 +00:00
09ac7d4697
kernel: add missing config symbol for 3.18+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44756
2015-03-15 04:40:10 +00:00
0a9b7ea932
bcm53xx: support NVRAM prefixes with extra / in devpath
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44755
2015-03-14 16:35:56 +00:00
578aa97f8c
x86: disable rts/cts for serial console in grub - fixes net48xx boot issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44753
2015-03-14 08:38:35 +00:00
c5aa269d57
kernel: linux 3.19 also needs the network namespace related fd export patch ( #19161 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44751
2015-03-14 05:38:14 +00:00
c7229b96b7
ralink: support change tx/rx ring size
...
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44741
2015-03-13 08:38:08 +00:00
2c94eef5df
ralink: use random generate mac address instead of default one.
...
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44740
2015-03-13 08:38:01 +00:00
800da5a02e
ralink: add wifi 5g dts info for cy-swr1100
...
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44739
2015-03-13 08:37:45 +00:00
Jonas Gorski
Felix Fietkau
Rafał Miłecki
Florian Fainelli
Imre Kaloz
John Crispin
Luka Perkov
Jo-Philipp Wich
Zoltan Herpai
Gabor Juhos
Steven Barth
Lars-Peter Clausen
Nicolas Thill
Michael Büsch