52e042ea55
bcm53xx: add upstream nand driver
...
This adds the upstream Broadcom nand driver and makes use of it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46131
2015-06-25 22:00:36 +00:00
164e82099d
bcm53xx: add upstream PCIe driver
...
This patch adds the missing parts to use the upstream Broadcom PCIe
driver and makes use of it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46130
2015-06-25 21:56:34 +00:00
ca49bcadae
bcm53xx: add arm l2c overwrite options like in mainline kernel
...
Instead of setting the l2c_aux_val variable in the board code make it
possible to set these through device tree and make use of that.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46129
2015-06-25 21:43:16 +00:00
37fb5ab893
bcm53xx: add support for kernel 4.1
...
This only removes the patches already applied upstream and makes the
rest apply cleanly.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46128
2015-06-25 21:33:53 +00:00
b0cdcf4e93
bcm53xx: respect ACTIVE_LOW when powering USB using GPIO
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46088
2015-06-21 16:47:05 +00:00
90d425039b
bcm53xx: enable USB power on Buffalo WZR-1750DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46087
2015-06-21 16:26:23 +00:00
0049d0ca75
bcm53xx: update SPROM driver to include just-sent patch
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46086
2015-06-21 14:26:03 +00:00
167a2dc12e
bcm53xx: enable USB power on Netgear R6250
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46083
2015-06-21 11:09:49 +00:00
64d3e52ad0
bcm53xx: update xHCI patch
...
This drops some debugging pr_info and adds platform_device_unregister.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46082
2015-06-21 11:09:30 +00:00
63bc66cfcd
bcm53xx: fix enabling GPIO-controlled USB power
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46081
2015-06-21 10:18:52 +00:00
b3afbe4918
bcm53xx: add xHCI support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46080
2015-06-21 10:18:43 +00:00
9a59b350b7
kernel: update 3.18 to 3.18.16
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
351a2ec15f
bcm53xx: use USB patches sent upstream by Hauke
...
This stabilizes USB support. The old patch was handling initialization
in a different order that was causing some problems with few USB 3.0
devices. Some weren't detected, some were working unstable, sometimes
USB 3.0 could hang the whole controller.
A still known issue (but not a regression) is controller hang triggered
by connecting USB 1.1 device when not having OHCI controller enabled
(kmod-usb-ohci).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45997
2015-06-16 08:28:46 +00:00
950c0191c2
bcm53xx: update NVRAM driver to MIPS version from upstream-sfr
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45943
2015-06-10 20:34:32 +00:00
e011a5c375
bcm53xx: backport the latest 4.2 ARM BCM5302X patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45922
2015-06-07 14:41:05 +00:00
2364dd9331
bcm53xx: refresh kernel config
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45916
2015-06-06 22:34:37 +00:00
46a25c6e8a
bcm53xx: fallback to default_do_upgrade if NAND upgrade fails
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45915
2015-06-06 17:52:53 +00:00
3d4f163df1
bcm53xx: sysupgrade: drop useless shift in platform.sh
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45914
2015-06-06 17:26:05 +00:00
54fb91f0cf
bcm53xx: extract TRX from image on the fly
...
Extracting TRX to separated file in /tmp/ just wastes some RAM while we
can just pass a proper extracting command to the default_do_upgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45912
2015-06-06 17:23:03 +00:00
5e90144aec
bcm53xx: sysupgrade: extract TRX partitions directly from vendor image
...
Extracting full TRX out of vendor format is not needed as otrx supports
passing TRX offset. This saves some RAM during sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45911
2015-06-06 17:05:31 +00:00
48da51ed03
bcm53xx: update NVRAM driver to support getting contents
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45907
2015-06-05 21:49:57 +00:00
9845d729a9
bcm53xx: build images for Asus devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45790
2015-05-27 16:20:06 +00:00
47eca7a1ca
bcm53xx: add OHCI (USB 1.1) support
...
There is also a OHCI controller, activate it for USB 1.1 support.
This should close #19601 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45716
2015-05-23 14:54:44 +00:00
76d079204d
kernel: update 3.18 to 3.18.14
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14
Build tested on brcm63xx and ipq806x, runtested on brcm63xx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
63bb7c51db
bcm53xx: add Asus RT-AC87U partitioning hacky workaround
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45694
2015-05-17 12:10:38 +00:00
75b8e247e3
bcm53xx: try to fix network on Asus RT-AC87U
...
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).
One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45692
2015-05-16 17:14:25 +00:00
ab83610563
bcm53xx: use backported Asus RT-AC87U DT patch
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45691
2015-05-16 15:44:00 +00:00
abed46aacc
bcm53xx: enable RT-AC87U UART console
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 45690
2015-05-16 11:45:52 +00:00
3dd9274332
bcm53xx: add support for SmartRG SR400ac
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45686
2015-05-13 20:01:15 +00:00
b4ecf19faa
bcm53xx: replace DT patches with backports from stblinux
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45685
2015-05-13 20:01:03 +00:00
af019cad56
bcm53xx: use of_machine_is_compatible helper in b53 fix
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45684
2015-05-13 14:34:23 +00:00
afb98aea4d
bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45683
2015-05-13 13:12:57 +00:00
610ee0d85a
bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45682
2015-05-13 13:11:17 +00:00
2d3aaa2d2f
bcm53xx: fix default network interface on Netgear R8000
...
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45681
2015-05-13 13:11:04 +00:00
45ec92fa30
bcm53xx: bgmac: add support for the 3rd core
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45680
2015-05-13 13:11:00 +00:00
d2e5e2bf54
bcm53xx: sync NVRAM and SPROM drivers with upstream version
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45678
2015-05-13 08:30:45 +00:00
3a6cdac37c
kernel: backport first bcma patches from 4.2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45652
2015-05-09 17:38:48 +00:00
33e597b241
bcm53xx: sort ports from NVRAM entries before matching them
...
Some devices have unsorted ports which may lead to broken config.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45575
2015-04-24 07:47:25 +00:00
866fe3895d
bcm53xx: sysupgrade: check if new kernel fits partition size
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45547
2015-04-21 11:21:34 +00:00
457d9caf4d
bcm53xx: sysupgrade: improve NAND warnings
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45546
2015-04-21 11:04:38 +00:00
5b9d70c888
bcm53xx: image: prepare for generating serial flash images
...
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45545
2015-04-21 08:42:41 +00:00
a86e7330dc
bcm53xx: sysupgrade: drop some debugging message
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45544
2015-04-21 08:34:25 +00:00
688c1d74b9
bcm53xx: sysupgrade: allow flashing NAND devices without --force
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45543
2015-04-21 08:32:59 +00:00
d263c8e1a9
bcm53xx: sysupgrade: support flashing TRX with UBI image
...
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45542
2015-04-21 08:20:06 +00:00
92875dbd3d
bcm53xx: append only 1 block (with erasing mark) to UBI
...
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45541
2015-04-21 08:20:00 +00:00
ac6879caaa
bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades
...
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45540
2015-04-21 08:19:53 +00:00
c73adc80a3
bcm53xx: add profiling support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45480
2015-04-17 18:52:15 +00:00
9e03c36259
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45473
2015-04-17 06:03:00 +00:00
582b20c4e2
kernel: accidentally committed a few patches in the wrong place, move them
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468
2015-04-16 20:43:11 +00:00
b860db2c63
bcm53xx: add power button for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467
2015-04-16 20:09:55 +00:00
Hauke Mehrtens
Rafał Miłecki
Jonas Gorski
Felix Fietkau