b0cdcf4e93
bcm53xx: respect ACTIVE_LOW when powering USB using GPIO
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46088
2015-06-21 16:47:05 +00:00
90d425039b
bcm53xx: enable USB power on Buffalo WZR-1750DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46087
2015-06-21 16:26:23 +00:00
0049d0ca75
bcm53xx: update SPROM driver to include just-sent patch
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46086
2015-06-21 14:26:03 +00:00
167a2dc12e
bcm53xx: enable USB power on Netgear R6250
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46083
2015-06-21 11:09:49 +00:00
64d3e52ad0
bcm53xx: update xHCI patch
...
This drops some debugging pr_info and adds platform_device_unregister.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46082
2015-06-21 11:09:30 +00:00
63bc66cfcd
bcm53xx: fix enabling GPIO-controlled USB power
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46081
2015-06-21 10:18:52 +00:00
b3afbe4918
bcm53xx: add xHCI support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46080
2015-06-21 10:18:43 +00:00
9a59b350b7
kernel: update 3.18 to 3.18.16
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
351a2ec15f
bcm53xx: use USB patches sent upstream by Hauke
...
This stabilizes USB support. The old patch was handling initialization
in a different order that was causing some problems with few USB 3.0
devices. Some weren't detected, some were working unstable, sometimes
USB 3.0 could hang the whole controller.
A still known issue (but not a regression) is controller hang triggered
by connecting USB 1.1 device when not having OHCI controller enabled
(kmod-usb-ohci).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45997
2015-06-16 08:28:46 +00:00
950c0191c2
bcm53xx: update NVRAM driver to MIPS version from upstream-sfr
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45943
2015-06-10 20:34:32 +00:00
e011a5c375
bcm53xx: backport the latest 4.2 ARM BCM5302X patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45922
2015-06-07 14:41:05 +00:00
2364dd9331
bcm53xx: refresh kernel config
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45916
2015-06-06 22:34:37 +00:00
46a25c6e8a
bcm53xx: fallback to default_do_upgrade if NAND upgrade fails
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45915
2015-06-06 17:52:53 +00:00
3d4f163df1
bcm53xx: sysupgrade: drop useless shift in platform.sh
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45914
2015-06-06 17:26:05 +00:00
54fb91f0cf
bcm53xx: extract TRX from image on the fly
...
Extracting TRX to separated file in /tmp/ just wastes some RAM while we
can just pass a proper extracting command to the default_do_upgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45912
2015-06-06 17:23:03 +00:00
5e90144aec
bcm53xx: sysupgrade: extract TRX partitions directly from vendor image
...
Extracting full TRX out of vendor format is not needed as otrx supports
passing TRX offset. This saves some RAM during sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45911
2015-06-06 17:05:31 +00:00
48da51ed03
bcm53xx: update NVRAM driver to support getting contents
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45907
2015-06-05 21:49:57 +00:00
9845d729a9
bcm53xx: build images for Asus devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45790
2015-05-27 16:20:06 +00:00
47eca7a1ca
bcm53xx: add OHCI (USB 1.1) support
...
There is also a OHCI controller, activate it for USB 1.1 support.
This should close #19601 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45716
2015-05-23 14:54:44 +00:00
76d079204d
kernel: update 3.18 to 3.18.14
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14
Build tested on brcm63xx and ipq806x, runtested on brcm63xx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
63bb7c51db
bcm53xx: add Asus RT-AC87U partitioning hacky workaround
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45694
2015-05-17 12:10:38 +00:00
75b8e247e3
bcm53xx: try to fix network on Asus RT-AC87U
...
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).
One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45692
2015-05-16 17:14:25 +00:00
ab83610563
bcm53xx: use backported Asus RT-AC87U DT patch
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45691
2015-05-16 15:44:00 +00:00
abed46aacc
bcm53xx: enable RT-AC87U UART console
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 45690
2015-05-16 11:45:52 +00:00
3dd9274332
bcm53xx: add support for SmartRG SR400ac
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45686
2015-05-13 20:01:15 +00:00
b4ecf19faa
bcm53xx: replace DT patches with backports from stblinux
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45685
2015-05-13 20:01:03 +00:00
af019cad56
bcm53xx: use of_machine_is_compatible helper in b53 fix
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45684
2015-05-13 14:34:23 +00:00
afb98aea4d
bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45683
2015-05-13 13:12:57 +00:00
610ee0d85a
bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45682
2015-05-13 13:11:17 +00:00
2d3aaa2d2f
bcm53xx: fix default network interface on Netgear R8000
...
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45681
2015-05-13 13:11:04 +00:00
45ec92fa30
bcm53xx: bgmac: add support for the 3rd core
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45680
2015-05-13 13:11:00 +00:00
d2e5e2bf54
bcm53xx: sync NVRAM and SPROM drivers with upstream version
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45678
2015-05-13 08:30:45 +00:00
3a6cdac37c
kernel: backport first bcma patches from 4.2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45652
2015-05-09 17:38:48 +00:00
33e597b241
bcm53xx: sort ports from NVRAM entries before matching them
...
Some devices have unsorted ports which may lead to broken config.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45575
2015-04-24 07:47:25 +00:00
866fe3895d
bcm53xx: sysupgrade: check if new kernel fits partition size
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45547
2015-04-21 11:21:34 +00:00
457d9caf4d
bcm53xx: sysupgrade: improve NAND warnings
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45546
2015-04-21 11:04:38 +00:00
5b9d70c888
bcm53xx: image: prepare for generating serial flash images
...
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45545
2015-04-21 08:42:41 +00:00
a86e7330dc
bcm53xx: sysupgrade: drop some debugging message
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45544
2015-04-21 08:34:25 +00:00
688c1d74b9
bcm53xx: sysupgrade: allow flashing NAND devices without --force
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45543
2015-04-21 08:32:59 +00:00
d263c8e1a9
bcm53xx: sysupgrade: support flashing TRX with UBI image
...
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45542
2015-04-21 08:20:06 +00:00
92875dbd3d
bcm53xx: append only 1 block (with erasing mark) to UBI
...
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45541
2015-04-21 08:20:00 +00:00
ac6879caaa
bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades
...
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45540
2015-04-21 08:19:53 +00:00
c73adc80a3
bcm53xx: add profiling support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45480
2015-04-17 18:52:15 +00:00
9e03c36259
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45473
2015-04-17 06:03:00 +00:00
582b20c4e2
kernel: accidentally committed a few patches in the wrong place, move them
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468
2015-04-16 20:43:11 +00:00
b860db2c63
bcm53xx: add power button for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467
2015-04-16 20:09:55 +00:00
f6cbbe1332
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45464
2015-04-16 20:09:36 +00:00
d51420eedc
bcm53xx: increate trx maxlen to prevent build failures with bigger images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45461
2015-04-16 20:09:15 +00:00
f8d499fd3f
bcm53xx: fix WXR-1900DHP power led name and add usb led
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45460
2015-04-16 20:09:08 +00:00
c64fdadea7
bcm53xx: make use of the new board detection layer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45458
2015-04-16 12:18:34 +00:00
147e005fcf
bcm53xx: add USB 2.0 power control for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45451
2015-04-15 16:06:20 +00:00
83e31eb7e7
bcm53xx: add USB 2.0 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
3edb55143d
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45445
2015-04-14 20:50:59 +00:00
3cb8bf44e6
otrx: change command line API to start with a mode
...
This will allow adding more modes without options conflict.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
923bef1678
bcm53xx: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426
2015-04-13 22:23:37 +00:00
24e9f52106
bcm53xx: add support for the Buffalo WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419
2015-04-13 17:32:25 +00:00
1e48a48915
bcm53xx: fix GPIO pins > 16
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418
2015-04-13 17:32:18 +00:00
1f70f452cc
bcm53xx: add missing l2 cache controller AUXCTL bit
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416
2015-04-13 17:32:05 +00:00
d24388da44
bcm53xx: add a comment about the gpio base patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45408
2015-04-12 22:10:44 +00:00
77c75e6fa3
bcm53xx: try to handle Netgear R8000 VLANs config
...
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45403
2015-04-12 20:11:25 +00:00
2dbe131a62
bcm53xx: fix bcma gpio chip base
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45399
2015-04-12 17:22:04 +00:00
95ef64a779
bcm53xx: allow sysupgrade firmwares without UBI containing rootfs
...
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45392
2015-04-12 12:04:13 +00:00
24d40980b0
bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade
...
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45391
2015-04-12 11:46:16 +00:00
a04b71d330
bcm53xx: rework vendor fw handling to don't duplicate upgrade calls
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45389
2015-04-12 10:42:27 +00:00
503ccc502d
bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation
...
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45387
2015-04-12 10:20:59 +00:00
9d6e04a4f1
bcm53xx: build image for ASUS RT-AC56U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45353
2015-04-10 09:58:00 +00:00
71fcbffc91
bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45352
2015-04-10 09:42:48 +00:00
2198db252c
bcm53xx: switch to the otrx for verifying TRX images
...
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45320
2015-04-09 06:33:56 +00:00
4c1ee6f24d
bcm53xx: replace few BCM5301X patches with versions sent upstream
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45311
2015-04-08 09:22:02 +00:00
b6e8da2e14
bcm53xx: image: share function checking TRX in provided firmware
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45292
2015-04-07 14:14:08 +00:00
7abd779730
bcm53xx: display all errors (not just the 1st one) when checking image
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45291
2015-04-07 14:14:02 +00:00
a19b69a717
bcm53xx: compare provided firmware magic with device magic
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45290
2015-04-07 14:13:56 +00:00
509cce44bd
bcm53xx: sprom: sync with mainline driver
...
The main difference now is bcm53xx registering it as platform (DT)
driver.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45230
2015-04-02 12:02:56 +00:00
91071e366c
bcm53xx: sprom: simplify reading NVRAM after last backports
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45229
2015-04-02 12:01:56 +00:00
bf828d3fd0
bcm53xx: use bcm47xx_nvram.c with the latest patches
...
This will be hopefully a mainline version.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45204
2015-04-01 07:21:59 +00:00
414e8ba634
bcm53xx: use the correct kernel image
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45003
2015-03-26 10:42:36 +00:00
48c69e3022
bcm53xx: convert to new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44996
2015-03-25 17:57:44 +00:00
68ca1f285c
bcm53xx: enable the full-line-of-zero optimization in the cache controller
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44977
2015-03-25 14:30:40 +00:00
0a84da0841
bcm53xx: add missing cache controller errata options
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44947
2015-03-23 10:14:27 +00:00
a6f914d573
bcm53xx: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44946
2015-03-23 10:14:20 +00:00
fb6164a377
bcm53xx: add SMP support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44939
2015-03-22 15:07:40 +00:00
e0155ad7b0
bcm53xx: add support for Asus RT-AC68U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44934
2015-03-22 01:57:15 +00:00
79c152b56b
bcm53xx: fix Asus RT-AC87U magic (even if not used yet)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44933
2015-03-22 01:57:10 +00:00
d324dd4ff3
bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44932
2015-03-22 01:57:06 +00:00
a4523c8e1d
bcm53xx: refresh patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44931
2015-03-22 01:56:47 +00:00
ba10454b91
kernel: backport bgmac patches
...
This allows dropping some hacky bcm53xx bgmac patch forcing link state.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44917
2015-03-21 11:45:50 +00:00
782e432797
bcm53xx: enable FIXED_PHY, we will need it for bgmac
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44916
2015-03-21 11:45:27 +00:00
7c6f7b716b
bcm53xx: switch to 3.18
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44852
2015-03-16 22:24:56 +00:00
0a9b7ea932
bcm53xx: support NVRAM prefixes with extra / in devpath
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44755
2015-03-14 16:35:56 +00:00
2b56913734
bcm53xx: fixup early device id 8012
...
Looks like the BCM53012 has a similar problem to the BCM53011.
Signed-off-by: Ian Kent <raven@themaw.net>
SVN-Revision: 44680
2015-03-11 17:32:02 +00:00
4c67f1d464
bcm53xx: fix typo in bcm47xx sprom driver
...
Fix thinko' in the bcm47xx sprom driver.
Signed-off-by: Ian Kent <raven@themaw.net>
SVN-Revision: 44679
2015-03-11 17:10:19 +00:00
c3b9b35155
bcm53xx: fix printing NAND controller revision
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44622
2015-03-07 12:31:42 +00:00
d15ac306fa
kernel: move KERNFS to generic config
...
KERNFS symbol is selected by SYSFS, so place it in generic config.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
f04a268a04
kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
...
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
6617845711
kernel: move MTD_SPLIT_SUPPORT to generic config
...
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
c2cf1abf8f
bcm53xx: switch to IRQ buttons (keys)
...
Now bcma provides IRQ domain we don't have to poll anymore.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44596
2015-03-03 23:15:55 +00:00
a416029d4d
bcm53xx: add one more NVRAM possible size (0x180000)
...
Size 0x160000 was added to support Buffalo WZR-600DHP2, however Netgear
devices (R6250, R8000) require 0x180000.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44497
2015-02-20 07:07:53 +00:00
08b45f73db
bcm53xx: include kmod-brcmfmac in default profile
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44467
2015-02-16 19:51:21 +00:00
44253d311f
bcm53xx: sprom: extract for PCI host
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44464
2015-02-16 16:13:23 +00:00
4c98253648
bcm53xx: sprom: prepare to support other hosttype-s
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44463
2015-02-16 16:10:05 +00:00
b5310e180d
bcm53xx: use bcm47xx_wdt for restarting device
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44408
2015-02-11 14:41:07 +00:00
6bafb2f810
bcm53xx: backport bcm47xx_wdt changes to 3.18 to use this driver in future
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44390
2015-02-11 10:11:00 +00:00
ddcbef5766
kernel: backport bcma patches queued for 3.20
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44385
2015-02-11 10:04:51 +00:00
3ae30df7db
bcm53xx: drop unused (and broken) GPIOLIB patch
...
First of all this patch was broken since adding 3.18 for bcm53xx. It was
modifying ARCH_BRCMSTB instead of ARCH_BCM_5301X.
Secondly we don't need it as ARCH_MULTIPLATFORM selects
ARCH_WANT_OPTIONAL_GPIOLIB for us.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44383
2015-02-11 08:42:34 +00:00
3dbaab6f67
bcm53xx: fix loading SPROM content by bcma init change
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44367
2015-02-09 18:43:05 +00:00
539cd23892
bcm53xx: fix partitions on Netgear R8000
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44219
2015-01-30 07:25:43 +00:00
1d1a1c19bf
bcm53xx: fix booting BCM4709
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44218
2015-01-30 06:58:35 +00:00
ee75859533
bcm53xx: fix Netgear R8000 serial console
...
Thanks raven-auand.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44217
2015-01-30 06:30:44 +00:00
251b42d491
bcm53xx: early support for Netgear R8000
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44186
2015-01-28 21:55:43 +00:00
bba98a3c53
bcm53xx: backport official Buffalo WZR-900DHP patch
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44070
2015-01-21 07:23:31 +00:00
3b701e8023
bcm53xx: backport spi-nor changes to add gd25q128 support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44069
2015-01-21 06:53:15 +00:00
f0d73a4381
bcm53xx: use final (backported) patch fixing serial console
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44059
2015-01-20 08:04:27 +00:00
ea1fe45fae
bcm53xx: backport 3 BCM5301X patches from Hauke repo
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44058
2015-01-20 07:21:30 +00:00
9758327d83
bcm53xx: rename patches modifying DTS files
...
Ths will allow us to use early 3xx numbers for patches designed for
sending mainline.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44057
2015-01-20 06:58:03 +00:00
78b0da393b
bcm53xx: add support/firmware for Asus RT-AC87U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44051
2015-01-19 11:05:22 +00:00
71c8ec020d
bcm53xx: drop hacky patch making bcma init later
...
The only reason this patch was helping was moving bcma init *after*
of_serial init. It was a bit of luck because both drivers use
device_initcall.
It isn't really a correct way to provide early logging.
Now we have earlyprintk support in bcm53xx we can drop this patch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43981
2015-01-16 15:59:29 +00:00
4ae1e883e8
bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43972
2015-01-14 13:41:05 +00:00
f59c84c431
bcm53xx: enable earlyprintk on more devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43965
2015-01-14 07:42:48 +00:00
8e95c2c5be
bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43964
2015-01-14 07:03:42 +00:00
55e766d78d
bcm53xx: refresh configs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43963
2015-01-14 07:03:17 +00:00
d1a28cfbb2
bcm53xx: support flashing CHK and CyberTAN images
...
SVN-Revision: 43800
2014-12-30 17:45:53 +00:00
e7d7f59171
bcm53xx: support WAN connected to switch port 0
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43754
2014-12-20 15:09:01 +00:00
192e945479
bcm53xx: PCIe: add link check again
...
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43748
2014-12-18 16:23:42 +00:00
e21e9c5548
bcm53xx: backport spi-nor changes and update bcm53xxspiflash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43738
2014-12-17 14:53:25 +00:00
dd9ca05249
bcm53xx: sysupgrade support for devices with serial flash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43719
2014-12-15 15:43:46 +00:00
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
3aaee1ba02
bcm53xx: failsafe support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43639
2014-12-11 20:31:07 +00:00
b55199cf41
bcm53xx: support LEDs on Buffalo devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43616
2014-12-11 11:23:26 +00:00
40d94a3ef0
bcm53xx: backport NVRAM driver sent upstream
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43612
2014-12-10 21:50:57 +00:00
ba81966001
bcm53xx: use bcma callback in SPROM driver to fill the SPROM
...
This is required because it has to be called at very precise moment. See
comment in driver for details.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43611
2014-12-10 21:24:11 +00:00
b0b43e1ef9
bcm53xx: use static NVRAM pointer for now
...
This will allow us to sync with code sent for upstream.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43608
2014-12-10 19:56:56 +00:00
960130e99c
bcm53xx: clean up nvram header
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43606
2014-12-10 18:29:26 +00:00
7093580424
bcm53xx: move SPROM driver to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43604
2014-12-10 18:07:01 +00:00
27a91a99d9
bcm53xx: move NVRAM driver to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43603
2014-12-10 18:01:24 +00:00
3fab0d818c
bcm53xx: move NVRAM header to the target files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43602
2014-12-10 17:37:24 +00:00
613bc3ef3f
bcm53xx: bcm_nand: fix compilation
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43584
2014-12-08 18:28:54 +00:00
aed6b26431
bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43580
2014-12-08 17:39:07 +00:00
7a2f186d70
bcm53xx: update the NAND driver
...
This adds some updates to the NAND driver and refreshed the config.
Most of these changes are done in preparation for mainling it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43546
2014-12-07 21:55:21 +00:00
664ae86dde
bcm53xx: update the PCIe driver
...
This adds some updates to the PCIe driver and refreshed the config.
Most of these changes are done in preparation for mainling it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43545
2014-12-07 21:54:53 +00:00
d9bb8326fa
kernel: update bcma and ssb to wireless-testing master-2014-12-05
...
This brings ssb and bcma to wireless-testing tag master-2014-12-05
In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43544
2014-12-07 21:53:20 +00:00
563f963b1b
kernel: refresh patches for kernel 3.18
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
dc6171c734
bcm53xx: 3.18: add early support for Buffalo WZR-900DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43534
2014-12-07 11:02:52 +00:00
a20fa1cb48
bcm53xx: add early support for Buffalo WZR-900DHP
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43533
2014-12-07 10:55:44 +00:00
9bec9b86af
bcm53xx: backport BCM5301X patches from arm-soc.git next/dt
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43530
2014-12-05 16:46:55 +00:00
d1e0e39993
bcm53xx: squeeze (rename) BCM5301X patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43529
2014-12-05 16:15:16 +00:00
8ea3c20b23
bcm53xx: rename patches that were not upstreamed to 3xx
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43528
2014-12-05 16:13:27 +00:00
8033ccc975
kernel: update bcma up to 2014-10-27
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43527
2014-12-05 16:11:03 +00:00
a69ebe234d
kernel: update kernel 3.18 to rc4
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43229
2014-11-10 22:51:30 +00:00
93b3924128
kernel: backport bcm47xxpart changes queued for 3.19
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43223
2014-11-08 21:41:21 +00:00
adbb5ad195
bcm53xx: bcma: get IRQs also from device tree
...
Add patches for getting the IRQ number for a device of the bcma bus
that were send for upstream inclusion.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43148
2014-11-01 15:57:30 +00:00
Rafał Miłecki
Jonas Gorski
Hauke Mehrtens
Felix Fietkau
John Crispin