Commit Graph

18 Commits (541f569a9dc0a61177332d333e40a8ec5c3c4ea2)

Author SHA1 Message Date
Gabor Juhos cc9600a1eb ar71xx/mikrotik: disable atnoher two non MikroTik boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45177
2015-03-31 08:30:56 +00:00
Gabor Juhos 04ba95f6d3 ar71xx/mikrotik: disable non MikroTik boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45176
2015-03-31 07:56:25 +00:00
Gabor Juhos 26800ef074 ar71xx/mikrotik: use correct symbol to disable overlayfs
The Kconfig symbol has been changed in 3.18.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45175
2015-03-31 07:56:22 +00:00
Gabor Juhos 3129f0c6f2 ar71xx/mikrotik: re-enable 4KiB flash sector erase
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45161
2015-03-30 19:57:52 +00:00
John Crispin 42a37b2a89 ar71xx: added support for TL-WA830RE V2
Corrected patch ath79 insted of auth79. Sorry.

Signed-off-by: Fredrik Jonson <fredrik@famjonson.se>

SVN-Revision: 41596
2014-07-13 07:12:22 +00:00
John Crispin 3519322e62 ar71xx: Add support for MikroTik RouterBOARD SXT Lite
This patch adds support for the MikroTik RouterBOARD SXT Lite.

The new RB911L series is also supported as a result.

v2 of this patch fixes the wmac offset to match what is on the sticker.
v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh
v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly
v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41450
2014-07-01 13:38:30 +00:00
Gabor Juhos 46a8af4c47 ar71xx/mikrotik: enable the AT803x PHY driver
It will be used on the RB91x boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40508
2014-04-13 20:41:51 +00:00
Gabor Juhos 7b89005f0d ar71xx/mikrotik: enable the 74x164 GPIO driver
That will be used to drive the 74HC595 serial-in/parallel-out
8-bits shift register which can be found on some RouterBOARDs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39702
2014-02-23 08:11:50 +00:00
Gabor Juhos da5caba072 ar71xx/mikrotik: enable the GPIO latch driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39698
2014-02-22 18:05:31 +00:00
Gabor Juhos be18a3849b ar71xx/mikrotik: enable small sector erase in the m25p80 driver
The serial flash devices used on the ROuterBOARDs are
supporting 4KiB erase blocks. Enable the small sector
erase option in the m25p80 driver to avoid superfluous
erase/write of adjacent blocks.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39696
2014-02-22 16:26:55 +00:00
Gabor Juhos 5237a50089 ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards
It is only on RB911G-5HPnD and RB912UAG-5HPnD boards.
The LEDs and the USB port is not working yet.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39102
2013-12-16 18:08:51 +00:00
Gabor Juhos f1eabfb23b kernel: remove obsolete yaffs options from target configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39085
2013-12-16 07:51:21 +00:00
Gabor Juhos 6928b4121f ar71xx/mikrotik: disable unused MTD options
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39080
2013-12-16 07:39:22 +00:00
Hauke Mehrtens 0e655122c6 kernel: add missing config options
The buildbots found some new missing config options.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38633
2013-11-01 08:49:35 +00:00
Gabor Juhos 715f16806f ar71xx: move subtarget specific features to target.mk
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38600
2013-10-30 06:54:59 +00:00
Gabor Juhos 6357738509 ar71xx: disable non Mikrotik boards in the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38597
2013-10-30 06:54:54 +00:00
Gabor Juhos 64ea60d210 ar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38595
2013-10-30 06:51:02 +00:00
Gabor Juhos 9e01011b5c ar71xx: rename 'nand' subtarget to 'mikrotik'
It is for Mikrotik devices only, rename the subtarget
to reflect that. Also fix the wget2nand script to use
the new image names.

Based on the patch by Stefan Agner:
http://patchwork.openwrt.org/patch/4123/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38509
2013-10-23 15:43:26 +00:00