Commit Graph

1502 Commits (506cf51b533da43405dd341b29c01bada1211b2b)

Author SHA1 Message Date
Imre Kaloz c26c5eff0e update .18 support for -rc6
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43357
2014-11-24 10:17:33 +00:00
Florian Fainelli dd8d7188ee aarch64: add initial support
Add initial support for the AArch64 architecture

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43353
2014-11-24 06:33:13 +00:00
Felix Fietkau ab92a23394 build: allow AutoLoad and AutoProbe to specify modules not included in the package
On out-of-tree modules depending on other out-of-tree modules from a
different tree, module dependencies are not filled properly.
This change helps with adding those dependencies in the AutoLoad call

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43323
2014-11-19 20:16:50 +00:00
John Crispin 6521f53c65 keernel: Fixed dependencies in netfilter modules introduced with 3.18 kernel
Building current trunk with 3.18 kernel fired some errors like 'missed
dependancy of module XXX from library kmod_YYY.ko'. These patch fixes 3
of such issues which are critical to have a successful build.

Signed-off-by: Alexey N Vinogradov <a.n.vinogradov@gmail.com>

SVN-Revision: 43318
2014-11-19 14:09:01 +00:00
Hauke Mehrtens a69ebe234d kernel: update kernel 3.18 to rc4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43229
2014-11-10 22:51:30 +00:00
Steven Barth 25a6d37e23 kernel: 3.18: Fix kmod-ipt-nat
The 3.18 kernel introduced new Kconfig options for the xt_nat and iptable_nat
kernel modules, that both belong to the ipt_nat kernel package.

Enable this new options.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43212
2014-11-08 12:17:14 +00:00
Felix Fietkau 9a2cf10c33 netfilter: Enable compiling iptables match cluster
This patch adds the userspace and kernelspace for

- match NETFILTER_XT_MATCH_CLUSTER
  This match can be used to deploy gateway and back-end load-sharing clusters.
- target IP_NF_TARGET_CLUSTERIP
  This module allows you to configure a simple cluster of nodes
  that share a certain IP and MAC address
  without an explicit load balancer in front of them.
  Connections are statically distributed between the nodes in this cluster.

This is used i.e. by strongswan-ha.

Signed-off-by: Christian Scheele <cs@embedd.com>

SVN-Revision: 43174
2014-11-03 22:01:45 +00:00
Rafał Miłecki cea2b5299b kernel: make it possible to select experimental 3.18 (3.18-rc2)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43094
2014-10-27 18:16:45 +00:00
John Crispin eb738f5275 generate list of license information for packages
Many packages define already metadata about their license (PKG_LICENSE),
but this is only included in the ipk files.

This change allows to create the information also on the build-host,
to get an overview on the used licenses.
In the full list, also all packages without this info are shown

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 43070
2014-10-26 16:57:33 +00:00
Felix Fietkau d4754e1eb5 Revert "include/shell.sh: remove getvar()"
It is more widely used than I thought.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43068
2014-10-26 16:18:24 +00:00
Felix Fietkau 0aca075a97 kernel: update 3.10.49 to 3.10.58 (released 2014-oct-15)
All platforms which are using 3.10.x at the moment are upgraded.

Changelogs:
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.50
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.51
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.52
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.53
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.54
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.55
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.56
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.57
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.58

A new symbol 'X86_16BIT' appeared in 3.10.52 with commit 34273f41d57ee8d854dcd2a1d754cbb546cb548f
("x86-espfix-make-it-possible-to-disable-16-bit-support.patch")
I defaults to 'unset', but it's worth a discussion to enable it
("turn off support for any 16-bit software").

Also removed the patch 0db3db45f5bd6df4bdc03bbd5dec672e16164c4e
("fix build failure on memcpy() in decompress.c")
and is obsolete by commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.
included in kernel 3.10.56

compile tested on all platforms with:
make tools/install
make toolchain/install
make target/linux/compile

user@box:~/user/openwrt$ cat /tmp/log.txt
[Wed Oct 22 00:36:02 CEST 2014] ./smoketest.sh: ar71xx - OK
[Wed Oct 22 00:53:22 CEST 2014] ./smoketest.sh: ar7 - OK
[Wed Oct 22 01:08:27 CEST 2014] ./smoketest.sh: au1000 - OK
[Wed Oct 22 01:21:43 CEST 2014] ./smoketest.sh: avr32 - OK
[Wed Oct 22 01:37:47 CEST 2014] ./smoketest.sh: cns21xx - OK
[Wed Oct 22 01:52:05 CEST 2014] ./smoketest.sh: cns3xxx - OK
[Wed Oct 22 02:10:23 CEST 2014] ./smoketest.sh: gemini - OK
[Wed Oct 22 02:29:07 CEST 2014] ./smoketest.sh: ixp4xx - OK
[Wed Oct 22 02:44:01 CEST 2014] ./smoketest.sh: malta - OK
[Wed Oct 22 02:55:57 CEST 2014] ./smoketest.sh: mpc85xx - OK
[Wed Oct 22 03:07:56 CEST 2014] ./smoketest.sh: orion - OK
[Wed Oct 22 03:24:30 CEST 2014] ./smoketest.sh: ppc40x - OK
[Wed Oct 22 03:40:19 CEST 2014] ./smoketest.sh: ppc44x - OK
[Wed Oct 22 03:55:29 CEST 2014] ./smoketest.sh: realview - OK
[Wed Oct 22 04:09:47 CEST 2014] ./smoketest.sh: sparc - OK
[Wed Oct 22 04:23:37 CEST 2014] ./smoketest.sh: x86 - OK
[Wed Oct 22 04:35:56 CEST 2014] ./smoketest.sh: xburst - OK

run tested on x86, au1000, ar71xx, mpc85xx and brcm47xx

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43049
2014-10-24 20:39:26 +00:00
Felix Fietkau 61caf7e89b kernel: allow targets to specify KERNEL_PATCHVER instead of LINUX_VERSION
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43043
2014-10-24 13:04:08 +00:00
Jo-Philipp Wich 4de4827ddc include: unbreak conffiles, postinst & prerm exports
Changeset r43017 reworked the ipkg control metadata generation but broke
the export of conffiles, postinst and prerm defines.

Change the code back to rely on shvar and shexport, this is required to
properly output multiline contents.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43041
2014-10-24 09:24:51 +00:00
Felix Fietkau 4fde9deed1 Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"
This seems to cause issues on some build hosts, and it is not that
important.

SVN-Revision: 43025
2014-10-22 10:47:26 +00:00
Felix Fietkau 949ab1487f build: only print skipped packages that were selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43023
2014-10-22 08:57:50 +00:00
Felix Fietkau d8278dee4d kernel: use /bin/sh instead of bash to speed up processing of many kmod-* packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43022
2014-10-22 08:57:45 +00:00
Felix Fietkau c497990834 build: use ONESHELL to speed up scanning and the toplevel makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43021
2014-10-22 08:57:40 +00:00
Felix Fietkau 43f485f334 include/shell.sh: remove getvar()
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43020
2014-10-22 08:57:30 +00:00
Felix Fietkau cc43532293 build: optimize target metadata dump
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43019
2014-10-22 08:57:25 +00:00
Felix Fietkau d081edf7eb build: clean up and optimize ipkg control generator code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43017
2014-10-22 08:57:16 +00:00
Felix Fietkau 364fb4dacb build: do not process built-in rules for make subdirs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43016
2014-10-22 08:57:11 +00:00
Felix Fietkau edc8e2022a build: optimize printing of disabled packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43015
2014-10-22 08:57:07 +00:00
Felix Fietkau 549f7d0366 prereq-build: rename the openssl check to libssl, add back the old check - it is required after all
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42999
2014-10-20 09:23:55 +00:00
Felix Fietkau 35b34b20d4 prereq-build: replace the openssl command check with a check for headers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42995
2014-10-20 09:17:56 +00:00
Jo-Philipp Wich 4f73613c26 build: improve feed handling for opkg.conf
- Consider not installed feeds as well
 - Add option to decide whether to comment disabled feeds

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42931
2014-10-16 10:30:16 +00:00
Felix Fietkau f6a6e9194a image.mk: remove legacy target rules
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42881
2014-10-12 15:01:08 +00:00
Felix Fietkau 44d04757af image.mk: parallelize cpio.gz and tar.gz filesystem build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42880
2014-10-12 15:01:01 +00:00
Felix Fietkau f135811687 image.mk: split off jffs2-raw images into a separate make target to improve parallel build time
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42879
2014-10-12 15:00:55 +00:00
Felix Fietkau 275cef6363 image.mk: clean up and parallelize mkfs calls
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42878
2014-10-12 15:00:49 +00:00
Felix Fietkau d99a680230 prereq.mk: only define .NOTPARALLEL when processing prereq checks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42877
2014-10-12 15:00:41 +00:00
Felix Fietkau 51c665bbdb kernel-build.mk: add .NOTPARALLEL
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42876
2014-10-12 15:00:19 +00:00
Felix Fietkau 7cbdc57b40 image.mk: call mkfs/prepare for the image builder
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42874
2014-10-12 15:00:11 +00:00
Felix Fietkau 71617f21a5 image.mk: reduce code duplication, move prepare to a separate make target
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42873
2014-10-12 15:00:07 +00:00
Felix Fietkau 9d242ae89c image.mk: remove the unnecessary .NOTPARALLEL flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42872
2014-10-12 15:00:03 +00:00
John Crispin b0a1c7dc0d include/download.mk: Add download mirrors for tools from GNU Savannah (bug #15184)
I defined a new download method @SAVANNAH in include/download.mk and scripts/download.pl,
and converted quilt and qemu to use that method.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 42840
2014-10-08 08:01:39 +00:00
John Crispin c22bebf6ab Fix build when TAR_OPTIONS env variable is set
The build system sets a make variable TAR_OPTIONS to the unpacking
command, i.e. "-xf -". Now if an environment variable with the same
name is set, the make variable is automatically exported to the
environment. The make variable is added to the tar command in the
makefile, and tar adds the environment variable. This results in a
command like "tar -c /some/dir -xf - -xf -" which of course doesn't
work. It is also difficult to spot as the second "-xf -" is not
visible on the command line.
I suggest this is fixed by unexporting TAR_OPTIONS as I see no use
of the evironment variable, and it is changed from the original
value anyway.

Signed-off-by: Jan Kardell <jan.kardell@telliq.com>

SVN-Revision: 42794
2014-10-06 04:53:14 +00:00
Felix Fietkau b0ef5e66fa build: remove useless quote stripping for KERNELNAME, add fallback for it in the kernel build command line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42781
2014-10-05 20:17:23 +00:00
Felix Fietkau 8a450a93a5 lantiq: remove the useless ltqtapi.mk include file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42778
2014-10-05 18:58:47 +00:00
Felix Fietkau a402b5c48d build: make sure modules are modposted after initramfs image is built
Otherwise the modpost steps for individual modules that are compiled
manually (using make package/<name_of_module>/install) will give warning
of missing symbols when that module depends other modules.

This is caused by the Module.symvers file not containing any symbols
anymore of external modules when the initramfs image is built without
specifically giving the modules target.

Signed-off-by: Tjalling Hattink <t.hattink@fugro.nl>

SVN-Revision: 42773
2014-10-05 16:58:16 +00:00
Felix Fietkau c6ebce701e build: propagate package conflicts to opkg metadata
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42771
2014-10-05 16:41:38 +00:00
Felix Fietkau 5e4789671a build: add support for declaring package CONFLICTS which only affect selecting built-in packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42770
2014-10-05 16:41:33 +00:00
Steven Barth a294c670e5 netfilter: unbreak kmod-ipt-nat for <3.7
SVN-Revision: 42696
2014-09-29 05:24:32 +00:00
Felix Fietkau a62f0d02ec build: allow packages with build variants to explicitly select a default variant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42654
2014-09-23 10:41:15 +00:00
Steven Barth aba8e9ceef netfilter: fix a typo in TTL-match module
SVN-Revision: 42611
2014-09-18 14:53:26 +00:00
Steven Barth 0e0efd4771 netfilter: remove redundant CONFIG_IP_NF_IPTABLES
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42599
2014-09-17 12:17:01 +00:00
Steven Barth e4e5c31f87 Reorganize netfilter kernel modules and package nftables kernel support
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42596
2014-09-17 12:10:44 +00:00
John Crispin 44249f71a8 postinst trigger: the new postinst trigger broke IB
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42571
2014-09-16 11:56:19 +00:00
John Crispin 2ef0acc5fc kernel-build: fix STRIP_KERNEL_EXPORTS for recent kernels
Recent kernels started to mark exported symbols as global.
Adapt expressions in kernel-build.mk to also match global symbols
when grep'ing through nm output.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 42555
2014-09-15 16:18:48 +00:00
John Crispin b44a2d3f7e include: remove file before overwritting it with replace_script
config.{sub,guess} could be symlinks to a shared common version of
this file (e.g. in staging). So we remove the destination file via
--remove-destination option of cp. This prevents replaceing the
common file that other packages could be build with if running at
the same time.

This fixes a class of errors where config.sub is missing, or
only partially present when running configure because a cp is
currently in progress

This is commonly seen building with a lot of parallel jobs and
on packages that use 'PKG_FIXUP:=autoreconf'

Signed-off-by: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>

SVN-Revision: 42547
2014-09-15 10:18:56 +00:00
John Crispin d6dbc22bbc ipkg: add a default postinst/prerm script
the postinst script enables/starts the init.d scripts upon package installation
and installs the users required by the package.

the prerm script stops and disables the init.d scripts.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42470
2014-09-11 12:27:49 +00:00