Commit Graph

228 Commits (4fae9db765f8af24c5b9d62801864ca0f386b0b5)

Author SHA1 Message Date
Luka Perkov 03401fed5e imx6: convert ventana images to squashfs+ubifs overlay
Replace the ventana ubi images from a single rootfs volume containing the
rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi
containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs'
squasfs volume, and rootfs_data an empty ubifs volume.

At the same time move ventana image creation over to using the new
TARGET_DEVICE syntax as a cleanup.

Additionally removed FIT image creation as it is recommended that this be
done manually to produce signed FIT images if needed.

Note that a bootscript is needed for Ventana to change its default mtdparts
to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there
are patches in OpenWrt kernels that try to auto-attach and auto-mount and these
get in the way if the mtd partition is named 'rootfs'.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
Luka Perkov ca26bf8932 imx6: kernel: add UBI_BLOCK support
UBI_BLOCK support is needed for mounting squashfs over UBI

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47507
2015-11-18 21:35:16 +00:00
Luka Perkov 486dc85e72 imx6: switch to v4.1
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47506
2015-11-18 21:35:12 +00:00
Luka Perkov 8c65560497 imx6: add Gateworks GW551x support
Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474

Add support for the Gateworks GW5510 board featuring:
 * i.MX6 SoC
 * up to 512MB DDR3
 * up to 2GB NAND flash
 * 1x miniPCIe socket (with USB)
 * HDMI out (micro-HDMI)
 * HDMI in (micro-HDMI) (currently supported by only vendor kernel)
 * TTL level I/O (supported by GW16111 breakout board):
  * I2C
  * 2x UART
  * CAN
  * 2x DIO (GPIO/PWM)
  * USB OTG

Also add support to OpenWrt build system

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47505
2015-11-18 21:35:09 +00:00
Hauke Mehrtens 55a912f43e kernel: update kernel 3.18 to version 3.18.23
Changelog:
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47334
2015-11-01 13:45:57 +00:00
Felix Fietkau 6bc9a6d0a8 imx6: add v4.1 support
Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47331
2015-11-01 12:19:32 +00:00
Felix Fietkau f5683a0a86 imx6: image: Remove custom mkfs targz override as base should be fine now
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.

Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47312
2015-10-31 09:28:25 +00:00
Felix Fietkau e09d32dd96 imx6: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variable
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47308
2015-10-31 09:27:49 +00:00
Luka Perkov 9c7336e0f9 imx6: fix platform checking
Fix platform checking when configuring networks and when doing sysupgrade.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47168
2015-10-10 12:35:02 +00:00
Felix Fietkau 1061f93476 imx6: disable ext2/ext3 filesystem support (ext4 is enough)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47032
2015-09-24 08:37:35 +00:00
Rafał Miłecki 39940fac6b imx6: add platform_pre_upgrade for sysupgrade
We're in process of cleaning nand_do_platform_check. Currently is leaves
a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
path in nand_upgrade_stage1. This can be a bit confusing.

The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.

This follows ar71xx, lantiq and partially bcm53xx.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46944
2015-09-15 16:05:03 +00:00
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Luka Perkov 22045c383d imx6: put uboot-envtools in DEFAULT_PACKAGES
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45478
2015-04-17 13:47:13 +00:00
Luka Perkov bb828e30b0 imx6: add missing patches from 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45378
2015-04-11 10:46:20 +00:00
Luka Perkov d21b92af8e imx6: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45371
2015-04-11 10:28:00 +00:00
Luka Perkov 912a6371f8 imx6: switch to 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45370
2015-04-11 10:27:49 +00:00
Luka Perkov 1e2f88b17b imx: add initial version of 3.18 support
This is build tested only.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45125
2015-03-29 05:48:56 +00:00
John Crispin f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin fa097e5ae5 kernel: disbale HAMRADIO in generic config
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.

So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44613
2015-03-06 07:56:21 +00:00
John Crispin 7886cced18 kernel: remove GENERIC_NET_UTILS from platform configs
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44611
2015-03-06 07:55:57 +00:00
Luka Perkov b78cddafcc kernel: update 3.14 to 3.14.28
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43929
2015-01-11 01:28:32 +00:00
John Crispin 6d52fd203d kernel/modules: fix chipidea
it should needs to depend on imx and mxs

also remove duplicate kmod definition from mxs target

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43627
2014-12-11 18:35:41 +00:00
Felix Fietkau 9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
John Crispin 5f51cfcf55 imx6: make the default config bootable on ventana
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43369
2014-11-24 19:12:19 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Felix Fietkau f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Luka Perkov 9ccacbaa40 imx6: fix image build for Generic profile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42455
2014-09-09 21:15:49 +00:00
Luka Perkov 20f48d27ea imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42297
2014-08-25 21:50:49 +00:00
Luka Perkov eb75d320d1 imx6: kernel: backport upstream fix for IMX6DL 800MHz speed grade
A previous backported patch that adds freq/voltage operating points for the
IMX6DL processor can cause hang/crash (general instability) on IMX6DL
processors in the industrial/automative speed grades as they don't support
1GHz operation.

This adds another backported patch from mainline that uses IMX6 fuse settings
to properly remove invalid operating points for the particular CPU grade used.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42294
2014-08-25 21:50:43 +00:00
Luka Perkov 24696a06ad imx6: update kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42149
2014-08-11 20:35:15 +00:00
Luka Perkov fa8e8d262e imx6: kernel: add GW5520 support
The GW5520 is a small form-factor single-board computer with the following
features:
 * 70x100mm form-factor
 * IMX6DL 800MHz SoC (IMX6Q optional)
 * 512MB 32bit DDR3 SDRAM (up to 2GB optional)
 * 256MB NAND FLASH (up to 2GB optional)
 * Gateworks System Controller
 * 2x front-panel Intel i210 GbE adapters with passive PoE support
 * 2x MiniPCIe sockets with USB support
 * 2x front-panel USB
 * 1x rear-panel full-size HDMI connector
 * 1x front-panel bi-color user LED
 * 1x front-panel user pushbutton
 * 1x rear-panel barrel jack for power
 * 1x Application connector with:
  * 2x TTL level UARTs
  * 10x TTL level Digital IO

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42148
2014-08-11 20:35:13 +00:00
Luka Perkov dcacd65281 imx6: kernel: add GW16083 Ethernet Expansion Mezzanine support
The GW16083 Ethernet Expansion Mezzanine adds the following to supported
Gateworks baseboards:
 * 7-port Ethernet Switch
  * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module)
  * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected)

This series adds support for a phy driver that adds support for ENET5/ENET6
PHY adding initialization for those PHY's and a polling mechanism that detects
SFP insertion and configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42147
2014-08-11 20:35:10 +00:00
Luka Perkov 9d826428b7 imx6: kernel: add GW16082 miniPCI Expansion Mezzanine support
The GW16082 miniPCI Expansion Mezzanine has the INTA/B/C/D IRQ's reversed
from the PCI standard. This will soon be resolved in the bootloader via
devicetree, but in the meantime this will work around the issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42146
2014-08-11 20:35:06 +00:00
Luka Perkov e47c4d7014 imx6: kernel: fix occasional link failure
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42145
2014-08-11 20:35:04 +00:00
Luka Perkov fe5d39d66c imx6: kernel: backport an upstream pci hang fix
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42144
2014-08-11 20:35:02 +00:00
Luka Perkov 97f26cad16 imx6: update upstream patch
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42081
2014-08-08 16:11:57 +00:00
Luka Perkov c84876702b imx6: drop 3.10 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42075
2014-08-08 13:38:31 +00:00
Luka Perkov 4c2c390a23 imx6: switch to 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42074
2014-08-08 13:38:30 +00:00
Luka Perkov 60fe58100c imx6: update upstream patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42073
2014-08-08 13:38:29 +00:00
Luka Perkov d5f94a4122 imx6: backport IMX6DL DVFS support from 3.15
This allows dynamic voltage and frequency scaling to work for IMX6DL CPU's.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42072
2014-08-08 13:38:27 +00:00
Luka Perkov 2b6d364a2d imx6: drop ventana kernel/rootfs hack
In r41578 this was added in order to make default images bootable for the BB
release. We need more generic approach for this.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42071
2014-08-08 13:38:25 +00:00
John Crispin 7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
2014-07-21 18:42:06 +00:00
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
Gabor Juhos d0ad8c00b6 kernel: sort Kconfig options in kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41614
2014-07-13 16:25:54 +00:00
John Crispin f88fde9689 imx6: put kernel and dtb into rootfs by default
this will make the rc1 images boot with the default config.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41578
2014-07-10 22:02:24 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
Luka Perkov fa0b9bccea imx6: move imx6.sh to /lib/ for consistency
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41339
2014-06-26 10:14:13 +00:00
John Crispin cf80a59dcc imx6: add sysupgrade support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41277
2014-06-19 14:13:38 +00:00
John Crispin 1a60486acb imx6: the script populating /tmp/sysinfo/ was in the wrong path
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41276
2014-06-19 14:13:34 +00:00
Florian Fainelli 43c0ad0f00 imx6: fix typo on wandboard detection
Revision r41256 introduced a typo (wandaboard => wandboard), but later
revisions expect to match on "wandboard"

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 41262
2014-06-18 16:34:23 +00:00
John Crispin efcec0faaf imx6: use /lib/imx6.sh inside the uci-defaults script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41257
2014-06-18 10:08:16 +00:00
John Crispin 2773bdfebf imx6: add a script to detect the board name and populate /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41256
2014-06-18 10:08:12 +00:00
John Crispin e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
2014-06-11 13:00:17 +00:00
John Crispin ac5d5cbc79 kernel: add a NAND_SUPPORT symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
2014-06-11 12:59:22 +00:00
Luka Perkov 284a07f748 imx6: kernel: update 3.14 pcie patches
Remove old irq map patch and replace it with the propper upstream patches
allowing IMX6 PCIe devices behind PCIe switches to work properly.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 41004
2014-06-04 23:01:30 +00:00
Luka Perkov cdd9e952e5 imx6: ventana: remove non-trunk packages from defaults
The canutils package is in the packages repo and not part of trunk, so we
should not enable them by default.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40991
2014-06-02 21:23:36 +00:00
Luka Perkov be7396bad7 imx6: ventana: add default kernel modules
Add the following kernel modules by default (which are present on most Ventana
baseboards):
 - kmod-leds-gpio (user leds)
 - kmod-sound-core (required as a dependency of the other sound modules)
 - kmod-pps-gpio (Pulse-Per-Second)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40990
2014-06-02 21:23:35 +00:00
Luka Perkov f637a1e562 imx6: update board names per device-tree updates
The Gateworks Ventana board names have been adjusted per upstream patches
to include all IMX6 SoC variants.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40989
2014-06-02 21:23:34 +00:00
Luka Perkov b87016722c imx6: update 3.14 ventana dts with upstream fixes
update the Ventana DTS files with upstream fixes:
 - The 'model' property in the imx-audio-sgtl5000 binding specifies the
   user-visible name of the audio device. This should be something common and
   not baseboard specific.
 - removed obsolete crts
 - fix include typo: The imx6q-gw51xx needs to include imx6qdl-gw51xx.dtsi
 - fix gw52xx clock for sgtl5000 ananlog audio codec
 - fix LVDS mapping for Ventana GW52xx/GW53xx/GW54xx
 - add LVDS backlight for Ventana
 - update model descriptions for all processor variants

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40988
2014-06-02 21:23:32 +00:00
Luka Perkov f689e3cf8b imx6: update 3.10 ventana dts
update the Ventana DTS files with upstream fixes:
 - The 'model' property in the imx-audio-sgtl5000 binding specifies the
   user-visible name of the audio device. This should be something common an
   not baseboard specific.
 - update model descriptions for all processor variants

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40987
2014-06-02 21:23:29 +00:00
Luka Perkov e37e0f17ed imx6: make boardname consistent with other targets
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 40758
2014-05-13 21:56:05 +00:00
Luka Perkov dce36465ad imx6: drop support for 3.13
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40754
2014-05-12 12:29:22 +00:00
Luka Perkov aa3d844d34 imx6: add support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40753
2014-05-12 12:29:19 +00:00
Luka Perkov b58e65f2ee imx6-gateworks: enable new canbus packages
The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40531
2014-04-19 21:39:04 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Luka Perkov f7f117b88d imx6: optimize for NEON FPU hardware
The IMX6 SoC uses an ARM Cortext-A9 which has both NEON and VFPv3 hardware
blocks.  This will tune gcc to use neon instead of vfpv3 which will outperform
VFPv3.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39760
2014-02-27 22:41:40 +00:00
Luka Perkov 6752d4cb08 imx6: enable FPU for hard float
The OpenWrt build system uses MACHINE_FEATURES of fpu to set the HAS_FPU which
in turn sets the default of CONFIG_SOFT_FLOAT as well as uClibc configuration.
As the IMX6 SoC has both vfpv3 and NEON hardware support we want to add fpu
to the feature list.  This will default the IMX6 target to use -mfloat-abi=hard
which will the be most efficient use of floating point.

When switching to hard float, we also need to enable VFP support in the kernel.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39759
2014-02-27 22:41:39 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Luka Perkov 223c6808ba imx6: update Ventana dts
Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39644
2014-02-20 17:26:10 +00:00
Luka Perkov a52100469f imx6: enable IMX6 watchdog
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39643
2014-02-20 17:26:08 +00:00
Luka Perkov fcbfe67e2a imx6: drop upstream rejected patch
http://article.gmane.org/gmane.linux.drivers.i2c/17891

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39639
2014-02-20 14:01:28 +00:00
Luka Perkov ef5c3bbb5f imx6: drop 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39574
2014-02-12 00:46:02 +00:00
Luka Perkov 3203599a7d imx6: add initial 3.13 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39573
2014-02-12 00:46:00 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Luka Perkov 5db5354c70 imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39135
2013-12-19 02:03:26 +00:00
Luka Perkov 1e9161528b imx6: proper fix for io-remap
The previous patch was not the proper fix for PCI devices that require io
resources.  The new patch is the proper fix backported from mainline.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39133
2013-12-19 02:03:16 +00:00
Luka Perkov b27f84034b imx6: ventana: add canbus utils
Some of the Gateworks Ventana boards have CAN bus support, therefore
we will install the userspace utils.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39113
2013-12-17 02:47:20 +00:00
Luka Perkov 7802f4619b imx6: ventana: add default kernel modules for GSC
All Gateworks Ventana boards have a Gateworks System Controller
which emulates the following:
 - ds1672 RTC
 - pca953x GPIO expander
 - hardware monitor
 - at24 eeprom

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39112
2013-12-17 02:47:18 +00:00
Luka Perkov 325a4f5b6e imx6: add rtc feature support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39111
2013-12-17 02:47:17 +00:00
Luka Perkov ccf1ee93d9 imx6: drop upstreamed patch
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39109
2013-12-17 02:47:15 +00:00
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Luka Perkov ceb57f139d imx6: add canbus support for Ventana boards
GW5400, GW5300, and GW5200 have CAN bus option.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39034
2013-12-11 10:56:11 +00:00
Luka Perkov 2bbd43d065 imx6: add flexcan support
backport upstream changes to 3.10:
 - 0060-flexcan.patch:
   - add flexcan pinctrl and devicetree config
 - 0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch
   - fix a clock issue
 - 0062-ARM-i.MX6q-fix-the-wrong-parent-of-can_root-clock.patch
   - fix a clock issue

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39033
2013-12-11 10:56:09 +00:00
Luka Perkov c8753ca97c imx6: add support for GW53xx
The Gateworks GW53xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 * i.MX6DL
 * NAND FLASH
 * 4x PCIe
 * 4x USB EHCI (1x front-panel; 3x PCIe sockets)
 * 1x USB OTG
 * 1x uSD
 * LVDS connector (VLDS for display, PWM/GPIO for backlight, i2c for touch)
 * HDMI Audio/Video out
 * Analog Video in
 * Digital IO
 * Gateworks System Controller
 * Accelerometer
 * Canbus
 * Optional GPS
 * Industrial temp (-40C to +85C)
 * DC input voltage 8 to 42V (Passive PoE and 802.3af)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39012
2013-12-09 11:30:23 +00:00
Luka Perkov 7523aa05c1 imx6: add DMA/SDMA support for 3.12
DMA and SDMA support are needed for ssi based audio.  Note that the sdma
firmware is no longer required for ssi audio.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39011
2013-12-09 11:30:22 +00:00
Luka Perkov c9ee51ad38 imx6: drop upstreamed patch
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39010
2013-12-09 11:30:20 +00:00
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
Luka Perkov 35b6be4a65 imx6: build images for ventana boards that are supported
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38859
2013-11-18 22:23:43 +00:00
Luka Perkov c108ddb209 imx6: merge all gateworks boards into one profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38858
2013-11-18 22:23:42 +00:00
Luka Perkov f552d290c6 imx6: add support for more then one nand type per profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38857
2013-11-18 22:23:40 +00:00
Luka Perkov 69beb313c6 imx6: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38856
2013-11-18 22:23:39 +00:00
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Luka Perkov da224973af imx6: drop unused variable from Makefile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38650
2013-11-05 08:00:30 +00:00
Luka Perkov 59d58990fb imx6: minor image cleanup
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38628
2013-10-31 11:44:27 +00:00
Luka Perkov 672a8cd6ba imx6: update patches
Changes include PCI fixes and various upstream pending patches.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38624
2013-10-30 23:31:26 +00:00
Luka Perkov 6b2c29d5f0 imx6: update gateworks profile with extra packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38579
2013-10-30 00:50:14 +00:00
Luka Perkov df388048b4 imx6: add initial 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38574
2013-10-29 02:19:09 +00:00