Commit Graph

45 Commits (4bc1ebbd88a2aef177a7d4c36c8cd5fbf7cf0bd0)

Author SHA1 Message Date
Zoltan HERPAI 805f756d6e uboot-sunxi: bump to 2017.11
Runtime-tested on:
 - Pine64 (A64)
 - Orange Pi 2 (H3)
 - Bananapro (A20)
 - Olimex A20-Micro (A20)
 - Pcduino v3 (A20)
 - Pcduino v2 (A10)

Compile-tested on:
 - all A8/A7/A53 boards

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-06 12:52:00 +01:00
Hauke Mehrtens 332438be40 uboot-sunxi: fix build of HAOYU Electronics Marsboard A10
The uboot target is named MarsBoard_A10 and it was not build at all.
This fixes a build problem seen by the build bot.

Fixes: 6a3565985f ("sunxi: Added profile for HAOYU Electronics Marsboard A10")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-23 21:25:46 +01:00
Luis Araneda bf6b3afa8c uboot-sunxi: add NanoPi M1 Plus board
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:06 +01:00
Zoltan HERPAI f9ecb0d562 sunxi: add Orange Pi 2 support
- H3 @ 1.3 GHz
- 1GiB DDR3
- 10/100Mbps Ethernet
- Realtek RTL8189ETV wifi
- 4 USB 2.0

Difference to the "Orange Pi Plus" is the lack of Gbit ethernet
and lack of onboard flash.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Kayo Phoenix 6a3565985f sunxi: Added profile for HAOYU Electronics Marsboard A10
The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC.
http://linux-sunxi.org/MarsBoard_A10

Signed-off-by: Kayo Phoenix <kayo@illumium.org>
[Forward-ported to new target layout:]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Daniel Golle b80f6a5876 uboot-sunxi: build for NanoPi NEO
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Hauke Mehrtens 5508510e74 sunxi: add Orange Pi R1 support
The following features are working and tested:
* both Ethernet ports
* MMC
* LED

The following features are not working:
* Wifi (There is a crappy driver we could port)
* SPI flash (I haven't looked into this)

I haven't tried out the rest.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 17:10:33 +02:00
Lucian Cristian a7465f375a sunxi: add Olimex A20-OLinuXino-LIME2-eMMC
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[replaced u-boot patch with original version from u-boot git]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
Lucian Cristian f295db6e46 sunxi: add Olimex A20-OlinuXino-LIME2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-09-18 21:29:16 +02:00
Hauke Mehrtens e080a7ce07 uboot-sunxi: build A64 SoC and pine64 U-Boot
This creates a U-Boot for the aarch64 SoC A64 on the pine64 board.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:27 +02:00
Hauke Mehrtens 41e7d2e2e8 sunxi: split into cortex A8 and A7 subtarget
Now we can activate some compiler optimizations for the cortex A7.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Hauke Mehrtens 1422d4435b uboot-sunxi: update to version 2017.07
The deleted patches are already integrated in the upstream U-Boot
version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-18 18:36:26 +02:00
Jo-Philipp Wich cf3d1b61bf sunxi: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Felix Fietkau e018c4d7ab uboot-sunxi: clean up, switch to u-boot.mk
Instead of referencing u-boot packages from device profiles and having a
-all metapackage, make the u-boot packages hidden (they don't install to
bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:25 +01:00
Felix Fietkau fbe3e22507 uboot-sunxi: enable parallel build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:15 +01:00
Yousong Zhou 6268d496a4 uboot-sunxi: add uboot-sunxi-all for selecting all other variants
While at it, the following changes are introduced

 - Rewrite the Makefile for better readability
 - Make parallel builds possible

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Felix Fietkau 720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Zoltan Herpai 2d4ebff3ad package: uboot-sunxi: various changes - bump to 2016.03 - add bugfixes related to 2016.03 update - sync DTS files with mainline - add support for non-standard uEnv.txt - add initial support for Theobroma A31-yQ7 devboard
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 49089
2016-03-29 11:42:14 +00:00
Zoltan Herpai 39f385d0d6 packages: bump uboot-sunxi to 2016.01
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48252
2016-01-15 20:27:32 +00:00
Zoltan Herpai f15fc140f1 packages: bump uboot-sunxi to 2016.01-rc3, along with H3 PSCI/SMP patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48154
2016-01-08 20:37:43 +00:00
Zoltan Herpai 0f18228a3a packages: bump uboot-sunxi to enable H3 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47959
2015-12-22 13:04:31 +00:00
Zoltan Herpai 58fc927889 sunxi: fix uboot install location
Install uboot files to KERNEL_BUILD_DIR instead of BIN_DIR to fix
ImageBuilder. Similar fixes are necessary for many (all?) other uboot
targets.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46605
2015-08-15 14:34:42 +00:00
Zoltan Herpai a33a567b39 packages: uboot-sunxi: bump to 2015.07 - switch to using kernel-supplied dtc - refresh olimex-a13-som and lamobo-r1 patches (compile-tested only)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46540
2015-07-31 21:58:31 +00:00
Zoltan Herpai be86eab8e6 packages: uboot-sunxi: add support for Lamobo R1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44067
2015-01-20 22:50:52 +00:00
Zoltan Herpai 8bf446a16b packages: uboot-sunxi: re-add Olimex A13 SOM which went AWOL in u-boot trunk
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 44039
2015-01-18 16:56:08 +00:00
Zoltan Herpai 4d0d09be10 packages: uboot-sunxi: remove unused Hackberry target
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 44038
2015-01-18 16:47:50 +00:00
Zoltan Herpai d41d7cc199 packages: update uboot-sunxi to 2015.01
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44035
2015-01-18 16:42:42 +00:00
Zoltan Herpai 157e1da749 uboot-sunxi: various updates - use mainline uboot-sunxi version (2015.01-rc3) - add support for Bananapro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43899
2015-01-09 19:19:35 +00:00
Luka Perkov 44d5800fe1 uboot-*: update license info in uboot packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43429
2014-11-29 23:45:53 +00:00
Nicolas Thill 8db5c4038d uboot-sunxi: add support for Olimex A20-OLinuXino-LIME
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43188
2014-11-06 00:05:15 +00:00
Nicolas Thill e39e1ba005 uboot-sunxi: cosmetic changes
This will ease adding new targets and updating:
 * split UBOOTS var into multiple lines
 * remove version from TITLE

Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43187
2014-11-06 00:05:10 +00:00
John Crispin 74a3a77bcd license info - revert r43155
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
John Crispin c10d97484a Add more license tags with SPDX identifiers
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
Zoltan Herpai 4e4be0bfa1 uboot-sunxi: add support for Olimex A13 SOM
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42692
2014-09-28 23:20:36 +00:00
Zoltan Herpai 14cf28b284 uboot-sunxi: bump to 2014.04
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42422
2014-09-06 15:18:40 +00:00
Zoltan Herpai d00f7b05c8 uboot-sunxi: add bananapi support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40899
2014-06-01 18:47:14 +00:00
Zoltan Herpai 9ee3edb4ca uboot-sunxi: add support for LinkSprite pcDuino v3 (a20)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40605
2014-04-30 19:37:56 +00:00
Zoltan Herpai 6892ed8193 uboot-sunxi: bump u-boot version - update u-boot to 2014.01-rc1 - smp support on a20
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>

SVN-Revision: 39779
2014-03-05 23:16:18 +00:00
Zoltan Herpai 16cbe62e9c sunxi: boot changes - Added uEnv.txt to facilitate automatic boot. - Cosmetic fix in u-boot Makefile - Don't force command line arguments
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39438
2014-01-31 15:53:53 +00:00
Zoltan Herpai 01a2ff6925 uboot-sunxi: - add support for Cubietruck - cosmetic change: have the options listed alphabetically
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39261
2014-01-12 19:16:35 +00:00
Zoltan Herpai f8911b3197 uboot-sunxi: add support for Olinuxino A10 LIME
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39221
2014-01-11 17:17:17 +00:00
Zoltan Herpai c2f62ecc25 add support for pcDuino board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39192
2014-01-04 10:09:52 +00:00
Zoltan Herpai 4800b2c723 update version
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39191
2014-01-04 10:08:31 +00:00
Imre Kaloz f6b57149af FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38943
2013-11-29 10:59:51 +00:00
Zoltan Herpai 5fa0e4fac0 uboot-sunxi: add U-boot builds for a couple sunxi boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38785
2013-11-13 10:49:22 +00:00