48feea4861
Add Netgear WNCE2001 (OF version)
...
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
e468abcae0
remove bootargs from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
82c3b7ce26
add ofpart info to the devicetrees
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
f1e9d30ffc
add sample swconfig portmap
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
fcd962cc71
set of_node before registring the switch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36285
2013-04-09 14:19:17 +00:00
130f67210a
ramips: TEW-691GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
a4a148f222
ramips: rt3883: enable the AR8216 driver
...
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36275
2013-04-08 12:34:15 +00:00
a9d977b2af
ramips: add profile for the Omnima EMB-HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36274
2013-04-08 11:12:04 +00:00
82705b30b3
ramips: OMNI-EMB-HPM.dts fixes
...
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
909fabe574
ramips: add mdio-bus node to rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
78ee80f2e8
ramips: fix MDIO/PHY handling
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36271
2013-04-08 11:12:01 +00:00
30e5bae84a
ramips: fix console speed for OMNI-EMB-HPM
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
cd7ce5226d
ramips: avoid invalid pointer dereference in pinmux code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36269
2013-04-08 08:24:50 +00:00
4c85227cf4
ramips: TEW-692GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
97635d7a8e
ramips: add PCI node into RTN56U.dts
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36264
2013-04-07 20:56:22 +00:00
474264f64c
ramips: add PCI node for rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36263
2013-04-07 20:56:21 +00:00
6c8951313c
ramips: rt3883: enable PCI support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36262
2013-04-07 20:56:20 +00:00
b6b0a8fbee
ramips: fix RT3883 PCI driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36261
2013-04-07 20:56:18 +00:00
1700bf5b2e
ramips: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36260
2013-04-07 17:05:05 +00:00
6de8743e44
ramips: add missing cpu-feature-override.h files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36259
2013-04-07 17:05:04 +00:00
68875710fd
ramips: fix broken patch name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36258
2013-04-07 16:26:27 +00:00
16d0ce52b0
ramips: fix polarity of GPIO buttons for RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36257
2013-04-07 16:24:33 +00:00
d1f28c6d1f
ramips: add nor-flash node for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
0c3c29ca38
ramips: fix pinmux settings for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
66fbe78a93
ramips: pinmux fixes
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
aedf05caa0
ramips: remove trailing whitespaces from dts files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
017aabe292
ramips: handle PCI interrupts in plat_irq_dispatch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
811f7f9f2d
fix typos inside dts files
...
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
709b19ed9f
fix default commandline in dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
85675528da
ramips: add cfi_cmdset_0002 patches
...
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
10d8e4b66c
ramips: remove top-level {address,size}-cells properties from .dts files
...
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
756b810178
ramips: fix ethernet switch node in DIR-645.dts
...
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
1ef39b43dd
ramips: remove spi node from RTN56.dts
...
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
d57e662cda
ramips: fix ethernet switch node in RTN56U.dts
...
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
4becd8590c
ramips: rt3883: enable the RTL8367 driver
...
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
348640f4b3
ramips: rt3883: sync 3.8 config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
d16de0b69f
fix typo pinmmux -> pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
df7af06f1f
fix dir-615 h1 network config
...
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
e1a74d8ff7
fix typo that made gpiomuxing fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
93899a1329
add profile for tenda w150m board
...
http://patchwork.openwrt.org/patch/3371/
Signed-off-by: Chi Zhang <zhangchi866@gmail.com>
SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
7e54357bd5
fix ALL5002 default package selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36175
2013-04-03 10:00:16 +00:00
37401dca92
Build WW factory image for DAP-1350
...
http://patchwork.openwrt.org/patch/3466/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36174
2013-04-03 10:00:12 +00:00
910b705155
add Huawei D105
...
http://patchwork.openwrt.org/patch/3510/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
c1710901c5
add profile for the Edimax 3g-6200NL board
...
http://patchwork.openwrt.org/patch/3214/
Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>
SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
f3643374c4
there is no ttyS1 console
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36171
2013-04-03 09:59:59 +00:00
99e0ff1123
make v3.8 the default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36170
2013-04-03 09:59:55 +00:00
c8d5f5e0ef
add new image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36169
2013-04-03 09:59:51 +00:00
770b28f146
add the dts files that describe the boards in future
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36168
2013-04-03 09:59:46 +00:00
2328e8389e
fix upvel profile names
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36167
2013-04-03 09:59:41 +00:00
John Crispin
Gabor Juhos