Commit Graph

21 Commits (39b8f7c0f7692e5971534a1571c92b91933e5882)

Author SHA1 Message Date
Felix Fietkau 4babe9dc6d ar71xx: fix 82_patch_ath10k
It has been broken since the new ath10k firmware introduced in r44656.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 45624
2015-05-08 10:43:55 +00:00
Jo-Philipp Wich f9aa2ec7f6 ar71xx: fix 82_patch_ath10k
The firware md5sum check never worked due to missing dollar signs.

Also suppress
  `md5sum: can't open '/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin'`
error on any board not using ath10k.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44486
2015-02-17 21:26:39 +00:00
John Crispin a2fcaa77fc ar71xx: add mc-mac1200r to do_load_ath10k_board_bin()
This patch adds the mc-mac1200r target to do_load_ath10k_board_bin() in
target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin to load the
ath10k radio MAC address from the EEPROM in MERCURY MAC1200R devices

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44375
2015-02-10 05:52:53 +00:00
John Crispin 31fd66f808 ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)
The board is already supported by OpenWrt. WNR1000v2/WNR1000v2-VC are
pretty much the same as WNR2000v3/WNR612v2, therefore the same
initialization code and flash layout is used.

Signed-off-by: Ștefan Rusu <saltwaterc@gmail.com>
Tested-by: Douglas Fraser <1dsfraser@gmail.com>

SVN-Revision: 44221
2015-01-30 08:06:40 +00:00
John Crispin a28d07abbe ar71xx: add an extra check on board_name for ath10k firmware patchs
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679
2014-12-13 08:06:01 +00:00
Imre Kaloz 974f286261 add D-link DGL-5500 A1 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43401
2014-11-27 14:27:34 +00:00
Imre Kaloz 15f6f67d18 Netgear R6100 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43382
2014-11-26 08:28:22 +00:00
John Crispin 7dbbdfb61f ar71xx: add qihoo 360 c301 router support
Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac.
Its chipset is AR9344 + AR9882 with two 16MB flashes.

This patch adds its initial support.

v2:
* use mtd_get_mac_ascii to fetch MAC address for ath10k.
* use ath79_register_pci to initialize AR9882.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 42552
2014-09-15 10:19:38 +00:00
Imre Kaloz ecba34a3ee add support for the NC-LINK SMART-300
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 42130
2014-08-11 11:44:51 +00:00
Imre Kaloz dc628f2e08 add support for the archer c5
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41814
2014-07-23 12:47:25 +00:00
Imre Kaloz 7e2c4d5732 extract and fixup the board.bin on the archer
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41757
2014-07-19 13:20:14 +00:00
Gabor Juhos 6991725a1e ar71xx: add user-space support for GL.iNet v1
Patch is based on http://patchwork.openwrt.org/patch/5273/.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: alzhao <alzhao@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5652/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41619
2014-07-13 18:21:06 +00:00
John Crispin f8f6678574 ar71xx: nbg6716: extract ath10k wifi board.bin
With help of this script the ath10k board.bin settings are loaded from
flash and saved to the ath10k firmware directory. The driver reads it
later in the boot process.

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 41562
2014-07-10 19:16:23 +00:00
Gabor Juhos e9c80a1224 ar71xx: fix failsafe acces on several devices
The ar71xx platform always uses the eth0 interface to provide
access to the device in failsafe mode. Due to this, failsafe
access is broken on devices where the LAN ports are connected
to the 'eth1' interface.

Update the relevant script to correctly set the ifname variable
for these devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39752
2014-02-25 17:40:04 +00:00
John Crispin 67f5f188b1 base-files: input/button drivers get loaded before preinit by procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37000
2013-06-21 16:53:47 +00:00
Felix Fietkau c918810414 ar71xx: switch to kmod-gpio-button-hotplug
SVN-Revision: 30660
2012-02-20 10:51:48 +00:00
Gabor Juhos 5177814ade ar71xx: change user-space board detection
SVN-Revision: 29432
2011-12-05 12:56:20 +00:00
Gabor Juhos e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
SVN-Revision: 26603
2011-04-12 09:29:21 +00:00
Daniel Dickinson 6bccc41f6c ar71xx: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced
SVN-Revision: 21634
2010-05-30 03:20:49 +00:00
Felix Fietkau 0e84ed29ea preinit: fix mixup between led and reset button enable on some platforms (thx, cshore)
SVN-Revision: 19370
2010-01-28 19:28:02 +00:00
Felix Fietkau 56bc02a305 add preinit modularization work by Daniel Dickinson (cshore)
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00