Commit Graph

827 Commits (3787078b269d11a3251ffe5f9bc4d0adf8573af9)

Author SHA1 Message Date
John Crispin c7c243669c sysupgrade: fixes broken pipe error during sysupgade
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36548
2013-05-05 12:41:42 +00:00
John Crispin 831c7ea04f preinit: move cmdline failsafe= handling ot the generic code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36430
2013-04-25 19:02:37 +00:00
John Crispin 811d90ff40 mount_root: prepare base-files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36429
2013-04-25 19:02:32 +00:00
John Crispin 39469dea7f boot: make use of kmodloader if it is available
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36428
2013-04-25 19:02:28 +00:00
Steven Barth 4e8f7f37ed Change default IPv6 config to enable DHCPv6-PD
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
Steven Barth ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
Jonas Gorski 574bab45ac base-files: firstboot: only ask for confirmation on TTY
Also allow '-y' to force the reset.

SVN-Revision: 36133
2013-03-27 12:39:42 +00:00
Jo-Philipp Wich 6bddf226d3 base-files: move sysctl init after boot
SVN-Revision: 36131
2013-03-26 10:02:58 +00:00
Jo-Philipp Wich 7aace3ee3e base-files: fix bad start index in previous commit
SVN-Revision: 36130
2013-03-25 18:45:23 +00:00
Jo-Philipp Wich acca7eadc4 package/base-files: change sysctl handling Move /etc/init.d/sysctl to index 00 and add hotplug script that applies interface specific sysctls for interfaces that only appear later - this allows to reliably configure per-interface parameters in sysctl.conf, e.g. to disable ipv6 autoconfig on a specific iface.
SVN-Revision: 36129
2013-03-25 18:43:30 +00:00
Florian Fainelli 513de712f9 base-files: also apply r36107 to files.old
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36112
2013-03-23 12:44:10 +00:00
Florian Fainelli 3810cc0f46 base-files: sysupgrade fail with eglibc
With eglibc, "ldd busybox" give us
    libcrypt.so.1 => /lib/libcrypt.so.1 (0x774be000)
    libm.so.6 => /lib/libm.so.6 (0x773e4000)
    libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x773c0000)
    libc.so.6 => /lib/libc.so.6 (0x77276000)
    /lib/ld.so.1 (0x774fe000)

Thus /lib/ld.so.1 is not printed by the libs fonction and isn't copied to the 'new' root before pivot root
libs() { ldd $* | awk '{print $3}'; }
https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/common.sh

With uclibc the last line of "ldd busybox" is
    ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x77ada000)

Don't know for musl!

This patch replace https://dev.openwrt.org/changeset/19167, as glibc is gone
The other way around is to rework libs()

Please apply the fix (mine or another) on trunk and AA
Might fix https://dev.openwrt.org/ticket/12273

Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36107
2013-03-22 10:06:06 +00:00
John Crispin ada74b8732 sysupgrade was broken as procd was getting killed
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36031
2013-03-14 18:43:58 +00:00
John Crispin f43b7934d2 make basefiles aware of procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36003
2013-03-13 18:11:19 +00:00
Jonas Gorski 29a3af1bb8 base-files: make firstboot ask for confirmation
To prevent accidential resets ask for confirmation (and default to n).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35712
2013-02-21 11:45:14 +00:00
Gabor Juhos 6c627a266b base-files: introduce commonly used helper functions for setting leds
Currently, most platforms define such helpers in their own diag.sh
implementation with almost identical code. By factoring out the
common ground it's possible to simplify maintainability and
homogenize the haptics over multiple platforms (so far as is
reasonably practicable, in a next step).

[juhosg:
 - fix led_set_attr parameters in led_timer
 - add led_morse and status_led_set_morse helpers
 - add status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35648
2013-02-18 09:56:23 +00:00
Gabor Juhos c4f14fab9b base-files: minor cosmetic corrections for functions.sh
- update copyright header
  - remove superfluous shebang left-over from changeset 34794
  - unify function declaration

[juhosg: keep Vertical Communications' copyright notice]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35646
2013-02-17 21:47:03 +00:00
Gabor Juhos 5a8c63b47e base-files: add macaddr_{add,2bin,setbit_la} helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35614
2013-02-16 11:50:22 +00:00
Gabor Juhos 70d40b2ddd base-files: add mtd_get_mac_{ascii,binary} helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35612
2013-02-16 11:50:19 +00:00
Steven Barth 92ad26d1b6 base-files: Fix IPv6 early sysctls again * Kernel IPv6 /proc interface inconsistency caused races
SVN-Revision: 35417
2013-02-01 12:28:24 +00:00
Steven Barth ea7c9c85a8 base-files: Fix race-conditions with IPv6 sysctls
SVN-Revision: 35368
2013-01-29 10:13:33 +00:00
Steven Barth 5f735b291f base-files: remove IPv6-forwarding setting for all interfaces
SVN-Revision: 35344
2013-01-28 13:53:38 +00:00
Steven Barth 231f8c2969 base-files: fix network_get_prefix6
SVN-Revision: 35300
2013-01-22 16:47:16 +00:00
Steven Barth e0a338c969 base-files: Set default value for IPv6 forwarding
SVN-Revision: 35299
2013-01-22 16:47:09 +00:00
Jo-Philipp Wich 1941fb309d base-files: network.sh: fix typo in previous commit
SVN-Revision: 35287
2013-01-21 19:02:38 +00:00
Jo-Philipp Wich 3b2db1838a base-files: network.sh: simplify network_get_prefix6()
SVN-Revision: 35286
2013-01-21 18:54:58 +00:00
Jo-Philipp Wich 648bd409e3 base-files: use numerically prefixed uci-defaults names
SVN-Revision: 35218
2013-01-18 12:46:43 +00:00
Steven Barth 411d818008 base-files: rename ULA generation script
SVN-Revision: 35204
2013-01-17 16:16:02 +00:00
Steven Barth 847cd984b9 base-files: add support for ipv6-prefixes in connection with netifd
SVN-Revision: 35168
2013-01-15 13:07:51 +00:00
Vasilis Tsiligiannis 674439299f base-files: Don't pass '--set-worker /lib/hotplug2/worker_fork.so' to hotplug2 (#12781)
SVN-Revision: 35095
2013-01-11 13:20:51 +00:00
Jo-Philipp Wich 70b0ef6322 sysupgrade: clarify online help
Fixes #12346.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 34975
2013-01-02 16:21:30 +00:00
Jo-Philipp Wich 58070b0083 sysupgrade: do not require an extra argument after --restore-backup
Neither --create-backup nor --restore-backup need an image name (following
the backup filename). Treat them in uniform way.

Mostly fixes #12346.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 34974
2013-01-02 16:21:26 +00:00
Steven Barth f657787b52 base-files: Fix a typo in config_list_foreach
SVN-Revision: 34893
2012-12-27 14:10:01 +00:00
Jo-Philipp Wich ab6e2e6928 base-files: ipcalc.sh: fix broken calculations on 64bit systems
Calculate complements by using awk's xor() function with a mask of 0xffffffff
instead of relying on the compl() function which appears to produce broken
results on certain 64bit architectures.

SVN-Revision: 34875
2012-12-23 22:18:43 +00:00
Felix Fietkau bbc6694d98 base-files: add basic procd integration, let procd start (and restart) ubus instead of having an ubus init script
SVN-Revision: 34866
2012-12-22 18:56:09 +00:00
Mirko Vogt 4cca5cd4fd hot-fix nameclash in sysupgrade: rename pivot() to supivot() in sysupgrade
Sysupgrade defines its very own pivot() function.
Prior merging boot.sh and functions.sh sysupgrade just included boot.sh,
now it includes functions.sh which defines pivot() as well, however
slightly different which causes sysupgrade to fail.

This is a hot-fix to unbreak sysupgrade, however those two pivot()
functions should actually get merged.

SVN-Revision: 34815
2012-12-21 12:10:21 +00:00
Luka Perkov 65efd09b78 base-files: we don't need /etc/functions.sh symlink anymore
SVN-Revision: 34802
2012-12-20 15:15:30 +00:00
Mirko Vogt 4d4b2d3ced merge /lib/functions/boot.sh and /lib/functions.sh
SVN-Revision: 34794
2012-12-19 16:07:53 +00:00
Mirko Vogt 439a869090 Do not overload mount-call - trying to reduce confusion
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
Jo-Philipp Wich 3339316fbe base-files: use json_is_a() in network.sh
SVN-Revision: 34733
2012-12-17 13:07:42 +00:00
Jo-Philipp Wich 17acf9bf27 base-files: rework cache handling in network.sh to keep the entire parsed ifstatus, use jshn namespaces to support using it concurrently with other jshn users
SVN-Revision: 34725
2012-12-16 20:17:18 +00:00
Jo-Philipp Wich 1600ba99e4 base-files: various enhancements to network.sh
- support reading inactive gateways and DNS information in
	  network_get_gateway(), network_get_dnsserver() and network_get_dnssearch()
	  by passing "true" as optional last argument
	- internally cache fetched values to speed up subsequent accesses to the same
	  data, introduce network_flush_cache() to clear them
	- add some inline function documentation

SVN-Revision: 34722
2012-12-16 18:22:02 +00:00
Gabor Juhos 1552af3131 base-files: add mtd_find_chardev helper
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34648
2012-12-12 16:49:50 +00:00
Mirko Vogt ee17703371 Revert "remove function find_mtd_part() from /lib/functions.sh"
Reverting commit 34641.
Function find_mtd_part() is needed by some scripts deployed
for certain targets but not including boot.sh after all.
Still, all this certainly needs some love.

SVN-Revision: 34642
2012-12-12 13:41:56 +00:00
Mirko Vogt 1521cdda0f remove function find_mtd_part() from /lib/functions.sh
Since all scripts using this function include /lib/functions/boot.sh -
where this function is defined as well - it can be dropped
from /lib/functions.sh. Also avoids further confusion about this
function being declared and defined in two different places.

SVN-Revision: 34641
2012-12-12 12:38:31 +00:00
Steven Barth 3b0e77ee6b Remove default sysctl-entry for IPv6 here (races)
SVN-Revision: 34417
2012-11-29 20:14:04 +00:00
Gabor Juhos 38fced86ee base-files: add support for the morse LED trigger
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).

Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34380
2012-11-25 17:20:49 +00:00
Florian Fainelli 5ae2524d3a base-files: use a natural mount syntax
Busybox built against musl-libc will choke on these otherwise, besides that
it is more natural to use the filesystem type, then options, then name, then
mountpoint.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34308
2012-11-23 20:02:02 +00:00
Florian Fainelli d3f22617a2 base-files: skip LEDs handled by rssileds in led init-script
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger.
This doesn't harm as the kernel will refuse this setting, but it outputs some
ugly log-lines:
Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW
Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument
...

In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33717
2012-10-11 06:45:02 +00:00
Imre Kaloz c5e5e70ab0 it's time to break the barriers
SVN-Revision: 33666
2012-10-08 13:12:37 +00:00
Felix Fietkau c7c649126f base-files: remove obsolete entries from sysctl.conf (#12236)
SVN-Revision: 33532
2012-09-24 15:24:01 +00:00
Florian Fainelli 78f4cf3d70 base-files: release an attached loop device on umounting
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 33477
2012-09-19 15:13:44 +00:00
Jo-Philipp Wich 2165240c32 base-files: make file compare silent in migrate-sysctl
SVN-Revision: 33449
2012-09-17 18:36:51 +00:00
Jo-Philipp Wich 0fd1fb6252 base-files: add uci-defaults script to migrate sysctl.conf (#12196)
SVN-Revision: 33448
2012-09-17 17:15:56 +00:00
Jo-Philipp Wich dac5ed38b6 base-files: remove route enabled check in lib/functions/network.sh after netifd bump
SVN-Revision: 33391
2012-09-13 08:47:10 +00:00
Gabor Juhos ca857b7a50 base-files: uci-defaults for rssileds
Adds capability to add uci-defaults defining RSSI LEDs

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33164
2012-08-13 14:01:37 +00:00
Jo-Philipp Wich 70aaa116eb base-files: provide a sysupgrade -r (--restore-backup) option as convenience wrapper for tar -C / -x(v)zf
SVN-Revision: 33147
2012-08-12 13:20:27 +00:00
Florian Fainelli fb9023bb8a move LIB_SUFFIX from base-files to rules.mk
Some packages are going to need fixups based on LIB_SUFFIX

SVN-Revision: 33080
2012-08-10 14:15:06 +00:00
Jo-Philipp Wich 17dc1d5c44 base-files: fix option parsing of -F/--force parameter
SVN-Revision: 33075
2012-08-09 18:30:47 +00:00
Florian Fainelli 31e46b4293 base-files: check for ldd presence and executability (#11991)
SVN-Revision: 33057
2012-08-08 15:37:34 +00:00
Florian Fainelli 6afd1725f1 base-files: fix detection of standalone ldd
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 32891
2012-07-27 15:35:00 +00:00
Vasilis Tsiligiannis 9ab1df3f48 base-files: Modernize hotplug2 rules (#11368)
SVN-Revision: 32711
2012-07-14 19:59:44 +00:00
Jo-Philipp Wich ff3161a6c4 base-files: ensure that /sys is available during sysupgrade, some essential services like om-watchdog need it
SVN-Revision: 32587
2012-07-03 15:43:43 +00:00
Jo-Philipp Wich b2e5c5f82e base-files: implement network_get_dnsserver() and network_get_dnssearch() in /lib/functions/network.sh
SVN-Revision: 32531
2012-06-29 19:04:11 +00:00
Jo-Philipp Wich e654014352 base-files: only consider enabled default routes when finding the wan iface (#11774)
SVN-Revision: 32525
2012-06-29 11:58:35 +00:00
Felix Fietkau 6c2a295245 base-files: enable TCP timestamps, enable sack/dsack. (patch by Dave Täht)
A year of testing in the cerowrt project shows not using timestamps
to be a very bad idea in nearly any TCP at speeds above a few Mbit.

Lastly sack/dsack help on recovery from larger amounts of packet
loss.

SVN-Revision: 32513
2012-06-27 22:32:44 +00:00
Jo-Philipp Wich f2dde4f5ba base-files: allow wireless ifaces to be part of multiple networks
SVN-Revision: 32503
2012-06-26 15:25:33 +00:00
Felix Fietkau 3143f03568 toolchain: move eglibc-files from base-files to toolchain, it is packaged as part of the libc package
SVN-Revision: 32467
2012-06-20 13:45:01 +00:00
Jo-Philipp Wich 57a7257569 base-files: implement network_get_gateway(), network_get_gateway6(), network_find_wan() and network_find_wan6() in /lib/functions/network.sh
SVN-Revision: 32397
2012-06-17 11:50:50 +00:00
Jo-Philipp Wich bfe966574f base-files: enable shell tracing in initscripts when INIT_TRACE is set
SVN-Revision: 32340
2012-06-13 17:10:41 +00:00
Felix Fietkau 9a1d6f0678 base-files: override Build/Compile/Default instead of Build/Compile (fixes #11667)
SVN-Revision: 32339
2012-06-13 16:25:29 +00:00
Felix Fietkau 07826e391d base-files: move all toolchain packages to a separate package directory 'toolchain'
SVN-Revision: 32169
2012-06-10 20:27:30 +00:00
Jo-Philipp Wich 9869b4da3c base-files: implement network_defer_device() and network_ready_device() wrappers for upcoming netifd iface deferring support
SVN-Revision: 32106
2012-06-07 14:55:26 +00:00
Jo-Philipp Wich 6cdf25289c base-files: add permission exceptions, do not clobber shadow permissions - based on patch by Mark Mentovai <mark@moxienet.com>
SVN-Revision: 32073
2012-06-05 18:02:00 +00:00
Jo-Philipp Wich 5e84df6bac base-files: ship a static initial shadow db instead of creating it from passwd with sed, this fixes registering of users at compile time
SVN-Revision: 32064
2012-06-05 17:48:41 +00:00
Jo-Philipp Wich a044a43d06 base-files: make user_add() populate the shadow db as well
SVN-Revision: 32063
2012-06-05 17:40:32 +00:00
Jo-Philipp Wich 9ae901445b /etc/functions.sh => /lib/functions.sh
SVN-Revision: 32062
2012-06-05 16:04:23 +00:00
Gabor Juhos eca7502dfd base-files: add LED specific functions to /lib/functions/uci-defaults
SVN-Revision: 31991
2012-05-29 16:39:16 +00:00
Felix Fietkau 8a9e94b077 base-files: remove base-files-network, netifd is the only supported option now
SVN-Revision: 31980
2012-05-29 12:59:03 +00:00
Jo-Philipp Wich c11151bc70 base-files: add network_is_up()
SVN-Revision: 31978
2012-05-29 02:03:25 +00:00
Jo-Philipp Wich bf52cbf108 base-files: let network_get_device() return the l3 interface, introduce network_get_physdev() to obtain the underlying iface (if applicable)
SVN-Revision: 31960
2012-05-29 00:20:16 +00:00
Jo-Philipp Wich 8ef9450b37 base-files: add network_get_device() to network.sh
SVN-Revision: 31937
2012-05-28 03:24:56 +00:00
Jo-Philipp Wich f1d04190c5 base-files: introduce /lib/functions/network.sh This file will contain common procedures to deal with network interfaces. Initially provides network_get_ipaddr(), network_get_ipaddr6(), network_get_subnet() and network_get_subnet6() to determine the primary IP addresses or subnets of a given logical interface.
SVN-Revision: 31935
2012-05-28 03:15:02 +00:00
Felix Fietkau 166db84309 base-files: kill ubusd and udhcpc on sysupgrade as well
SVN-Revision: 31852
2012-05-23 21:54:12 +00:00
Felix Fietkau 5d6628a88c base-files: allow sysupgrade to kill netifd, fixes pppd shutdown on upgrade
SVN-Revision: 31851
2012-05-23 21:49:31 +00:00
Gabor Juhos 6aec1d72c2 package/base-files: copy /lib/functions.sh to the ramfs on sysupgrade
SVN-Revision: 31842
2012-05-23 21:05:20 +00:00
Felix Fietkau 5eed1d8f6b enable netifd by default and add its config variable to PKG_CONFIG_DEPENDS in a few relevant places
SVN-Revision: 31730
2012-05-14 23:33:35 +00:00
Jonas Gorski 80650c9475 base-files: wait for wifi modules to settle
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.

This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.

SVN-Revision: 31639
2012-05-06 21:25:42 +00:00
Mirko Vogt 232b7aa65b remove special treatment when using glibc - support got dropped
SVN-Revision: 31504
2012-04-28 22:24:16 +00:00
Mirko Vogt 334fd4199b purge support for glibc - use eglibc instead!
for reference: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg13425.html

SVN-Revision: 31503
2012-04-28 22:24:12 +00:00
Florian Fainelli 129afe12b7 base-files: fix typo in 05_firstboot_skip script (#11359)
SVN-Revision: 31492
2012-04-27 16:49:16 +00:00
Felix Fietkau 3678ba60ca base-files: rename internal variables in config_foreach to make namespace conflicts more unlikely
SVN-Revision: 31431
2012-04-21 20:34:45 +00:00
Jo-Philipp Wich 3c4165a305 enable ntpd server for busybox
hi

Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1,  ntpd will answer with the time of the router)

I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)

 Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option?  Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

SVN-Revision: 31374
2012-04-20 15:05:38 +00:00
Jo-Philipp Wich b4312a8ba1 base-files: reformat banner to better work with varying version string lengths, do not set image options if menu is disabled (#11280)
SVN-Revision: 31289
2012-04-15 15:21:55 +00:00
Jo-Philipp Wich d8540259ca base-file: cleanup white space in Kconfig source
SVN-Revision: 31267
2012-04-12 23:01:39 +00:00
Jo-Philipp Wich a43ae30e1b include, base-files, opkg: introduce version configuration to override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner
The available placeholders are:
 %D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt"
 %d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt")
 %N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment")
 %n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment")
 %V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262")
 %v .. Like %V, but all characters made lowercase and spaces substituted with "_"
 %C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge"
 %c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge")
 %U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages"
 %R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c")
 %T .. Replace with the current target (e.g. "ar71xx")
 %S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le")

SVN-Revision: 31262
2012-04-12 17:31:16 +00:00
Jo-Philipp Wich 3c3941f109 base-files: remove network preconfig, it collides with ar71xx network firstboot uci-defaults To supply custom network settings, it is better to embed a complete network config file using the files/ overlay, the old image lan preconfig options are also very limited in scope and actually collide with sysupgrade and firstboot hardware detection on at least ar71xx and possibly other targets, therfore drop this facility.
SVN-Revision: 31258
2012-04-12 09:43:44 +00:00
Felix Fietkau 6f46704743 base-files: split service related functions off to /lib/functions/service.sh
SVN-Revision: 31042
2012-03-20 14:29:50 +00:00
Jo-Philipp Wich 5fdd1f4bd7 Add munin to /etc/services
The muninlite postinst fails to add munin to /etc/services.

This patch removes this broken postinst and add an entry for munin in
/etc/services. This should have been done when the rest of the
/etc/services postinsts were being removed (changesets 26142-26149).

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 30982
2012-03-18 19:41:57 +00:00
Felix Fietkau 5744d736f2 base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well
SVN-Revision: 30916
2012-03-13 09:18:30 +00:00