Commit Graph

39 Commits (373c84c30b95d1def54fb2437a2d52d5168bab42)

Author SHA1 Message Date
Rafał Miłecki 1020b84266 brcm47xx: add early support for WNDR3400 V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43532
2014-12-07 00:58:40 +00:00
Rafał Miłecki c84fe94b0d brcm47xx: add support for Netgear WGR614 V10
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43336
2014-11-20 22:15:21 +00:00
Rafał Miłecki 746b80f166 brcm47xx: image: create initramfs TRX nodictionary images
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42889
2014-10-13 05:53:33 +00:00
Hauke Mehrtens 09739f8ba5 brcm47xx: image: build alternative TRX using less optimized LZMA
There is a group of devices that lzma-loader doesn't work with. They
simply hang at "Starting program at 0x80001000" which is really hard to
debug and we didn't find any solution for this for years.

Broadcom doesn't use lzma-loader on these devices anyway. They decided
to drop lzma-loader and use less optimal LZMA compression that can be
handled by CFE itself (it doesn't use dictionary).

So support these devices we will need kernel compressed with different
parameters and trx without a loader.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42205
2014-08-18 21:00:55 +00:00
Hauke Mehrtens ba0b904d0b brcm47xx: image: update list of Netgear WNR* firmwares
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42165
2014-08-14 21:22:17 +00:00
Hauke Mehrtens 4632347879 brcm47xx: remove unneeded images from generic target
broadcom-wl now builds in the mips74k profile, so remove these chips
from the generic profile.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41546
2014-07-07 17:47:24 +00:00
Hauke Mehrtens 3597b7d456 brcm47xx: image: legacy: take over old devices images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41530
2014-07-06 17:21:37 +00:00
Hauke Mehrtens 0eb3c26e7d brcm47xx: image: mips74k: take over some device images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41529
2014-07-06 17:14:29 +00:00
Hauke Mehrtens c3b3df1da8 brcm47xx: image: prepare for using mips74k subtarget
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41528
2014-07-06 17:14:06 +00:00
Hauke Mehrtens b5d42bc111 brcm47xx: move current target to "generic" subtarget
This allows creating more subtargets and optimize builds per family.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41024
2014-06-05 21:23:58 +00:00
Hauke Mehrtens 1d878cabf2 brcm47xx: image: respect device flash block size
We should be more careful and don't generate 128K JFFS2 images for
devices with flashes using 64K blocks (nor the other way).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40762
2014-05-14 10:08:56 +00:00
Hauke Mehrtens 4cd010a712 brcm47xx: image: document some defines arguments
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40761
2014-05-14 10:08:22 +00:00
Hauke Mehrtens c78e4fb220 brcm47xx: Add support for Huawei E970
This patch adds support for Huawei E970 wireless gateway devices.
It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV.
E960/B970 should work too, from what I know it's basically the same hardware.

The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem.

It uses a hardware watchdog which needs GPIO-7 to be toggled at least
every 1-2 seconds. This patch uses gpio_wdt module (see my previous
patch today) to take care of this.

Tested and works:  3G wan,  wlan+LED,  VLAN config,  failsafe using reset
button,   image to be used for upgrade from OEM firmware's web interface

Link to the wiki page I've created:  <http://wiki.openwrt.org/toh/huawei/e970>

Issue:

* lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog
  reset during kernel decompress.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>

SVN-Revision: 38011
2013-09-16 21:09:10 +00:00
Florian Fainelli 6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Hauke Mehrtens ca7f9638d5 broadcom-diag: support for the WNDR3700v3
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 36482
2013-04-28 21:11:17 +00:00
Hauke Mehrtens 98ef9e5411 brcm47xx: generate images for Linksys E.... models
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 36139
2013-03-27 15:51:28 +00:00
Hauke Mehrtens 31c9452120 brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported.
SVN-Revision: 36137
2013-03-27 15:35:52 +00:00
Hauke Mehrtens a9e5a178ef brcm47xx: generate images for more WRT...N models
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 36136
2013-03-27 15:34:55 +00:00
Hauke Mehrtens d5cf67297a brcm47xx: generate images for some more devices
These devices should be supported by trunk now.

SVN-Revision: 36099
2013-03-20 22:01:18 +00:00
Hauke Mehrtens 5d3b728372 brcm47xx: board detection WNDR3400v2
WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#".

CFE and NVRAM contain different vars - example:
CFE line original: Device eth0:  hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0
CFE after openwrt: Device eth0:  hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0

Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html
Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2
(and on wikidevi for example)

Signed off by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 35790
2013-02-25 20:55:46 +00:00
Hauke Mehrtens e083c7926b brcm47xx: create image for Netgear WNDR3400 V1
SVN-Revision: 35323
2013-01-26 20:34:38 +00:00
Hauke Mehrtens 6c8efbfdc0 brcm47xx: Additional BCM4716 support
Additional BCM4716 support.  Still needs working ethernet driver.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34672
2012-12-13 18:57:38 +00:00
Imre Kaloz 702fd5cdb5 generate images for the D-Link DWL-3150 as well
SVN-Revision: 33961
2012-10-27 09:42:58 +00:00
Hauke Mehrtens 35661401da generate image for Linksys e3200
SVN-Revision: 33003
2012-08-05 13:14:00 +00:00
Hauke Mehrtens 482b99a660 brcm47xx: generate image for Linksys WRT610N V1
SVN-Revision: 31696
2012-05-13 00:16:57 +00:00
Hauke Mehrtens 5dec9dd3b2 brcm47xx: add code to generate images for some netgear devices
This is commented out until we get report of working devices.

SVN-Revision: 30639
2012-02-18 23:21:47 +00:00
Felix Fietkau 24dfe525c2 brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default
SVN-Revision: 28125
2011-08-29 21:23:51 +00:00
Hauke Mehrtens 8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot
SVN-Revision: 27316
2011-06-29 17:42:34 +00:00
Hauke Mehrtens 8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400.
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
2011-06-28 22:23:21 +00:00
Hauke Mehrtens bf64ac730a bcm47xx: Remove kernel checks from image Makefile
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27185
2011-06-15 21:11:49 +00:00
Hauke Mehrtens 41b3383499 brcm47xx: Add edimax PS1208mfg support
Thank you clemvangelis for the patches. (closes #7672)

SVN-Revision: 24217
2010-12-02 21:27:54 +00:00
Hauke Mehrtens 09244c0811 brcm47xx: do not generate image for wgr614_v8 as long as we did not get any positive reports with that device.
SVN-Revision: 22522
2010-08-06 22:50:58 +00:00
Hauke Mehrtens 7640f89045 brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/

This closes #7702.

SVN-Revision: 22516
2010-08-06 20:21:32 +00:00
Hauke Mehrtens da7493d8f9 mostly revert commit r22396
CFE does not boot images generated with these checksums because of
wrong checksum.

After flashing then with tftp to my Asus wl500-GPv1 the following messages
are show:
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)

SVN-Revision: 22418
2010-07-30 21:19:49 +00:00
Markus Wigge 7a052dc799 fix CRC32 calculation for sysupgrade
* reduce image size for CRC calculation by fs_mark size

sysupgrade sometimes failed for me and I noticed that it was due
to incorrect CRC values in trx-header after performing it.
It seems that the fs_mark was completely included in the calculation
and that it was nevertheless modified by sysupgrade while appending
the jffs data.
This only occurs for the first boot after sysupgrade as the flashmap
driver recalculates the CRC to an even smaller area when it boots.

SVN-Revision: 22396
2010-07-27 15:37:37 +00:00
Markus Wigge 114ce0bd4c renamed wrt54g3gv2-vf images
'factory' and 'sysupgrade' did not make much sense. A discussion
with jow convinced me that .trx results in a helpdesk disaster.
So I decided to use '.bin' for normal bin-headers and '.noheader.bin'
for the trx-v2 image.
I fixed the wiki accordingly.

SVN-Revision: 22013
2010-07-01 10:48:13 +00:00
Felix Fietkau 812f026323 add back the base-files/image code from brcm-2.4 to brcm47xx
SVN-Revision: 21945
2010-06-26 20:41:49 +00:00
Felix Fietkau 519b6a2f4c remove brcm47xx symlinks to brcm-2.4 (unfortunately svn does not allow a proper type changing commit)
SVN-Revision: 21944
2010-06-26 20:41:40 +00:00
Felix Fietkau 56231056ea strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
SVN-Revision: 8653
2007-09-06 16:27:37 +00:00